linux/arch/arm/boot/dts/omap2430-sdp.dts
Javier Martinez Canillas 101ace8d13 ARM: dts: omap2: Add missing unit name to memory nodes
This patch fixes the following DTC warnings:

"Node /memory has a reg or ranges property, but no unit name"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-31 07:40:22 -07:00

74 lines
1.6 KiB
Plaintext

/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "omap2430.dtsi"
/ {
model = "TI OMAP2430 SDP";
compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
};
&i2c2 {
clock-frequency = <100000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
};
};
#include "twl4030.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
bus-width = <4>;
};
&gpmc {
ranges = <5 0 0x08000000 0x01000000>;
ethernet@gpmc {
compatible = "smsc,lan91c94";
interrupt-parent = <&gpio5>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,mux-add-data = <2>;
gpmc,device-width = <1>;
gpmc,cycle2cycle-samecsen = <1>;
gpmc,cycle2cycle-diffcsen = <1>;
gpmc,cs-on-ns = <6>;
gpmc,cs-rd-off-ns = <187>;
gpmc,cs-wr-off-ns = <187>;
gpmc,adv-on-ns = <18>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <60>;
gpmc,oe-off-ns = <169>;
gpmc,we-on-ns = <66>;
gpmc,we-off-ns = <169>;
gpmc,rd-cycle-ns = <187>;
gpmc,wr-cycle-ns = <187>;
gpmc,access-ns = <187>;
gpmc,page-burst-access-ns = <24>;
gpmc,bus-turnaround-ns = <24>;
gpmc,cycle2cycle-delay-ns = <24>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,wr-access-ns = <0>;
};
};