linux/drivers/net/ethernet/intel/e1000e
Benjamin Poirier 3016e0a0c9 Revert "e1000e: Separate signaling for link check/link up"
This reverts commit 19110cfbb3.
This reverts commit 4110e02eb4.
This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98.

Commit 19110cfbb3 ("e1000e: Separate signaling for link check/link up")
changed what happens to the link status when there is an error which
happens after "get_link_status = false" in the copper check_for_link
callbacks. Previously, such an error would be ignored and the link
considered up. After that commit, any error implies that the link is down.

Revert commit 19110cfbb3 ("e1000e: Separate signaling for link check/link
up") and its followups. After reverting, the race condition described in
the log of commit 19110cfbb3 is reintroduced. It may still be triggered
by LSC events but this should keep the link down in case the link is
electrically unstable, as discussed. The race may no longer be
triggered by RXO events because commit 4aea7a5c5e ("e1000e: Avoid
receiver overrun interrupt bursts") restored reading icr in the Other
handler.

Link: https://lkml.org/lkml/2018/3/1/789
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12 11:34:05 -07:00
..
80003es2lan.c e1000e: use BIT() macro for bit defines 2016-05-13 15:15:36 -07:00
80003es2lan.h e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
82571.c e1000e: factor out systim sanitization 2016-08-16 10:46:19 -07:00
82571.h e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
defines.h e1000e: Avoid missed interrupts following ICR read 2018-03-05 10:08:20 -08:00
e1000.h e1000e: apply burst mode settings only on default 2017-10-10 09:00:48 -07:00
ethtool.c e1000e: Don't return uninitialized stats 2017-06-06 01:05:13 -07:00
hw.h e1000e: Initial Support for IceLake 2017-08-08 17:54:21 -07:00
ich8lan.c Revert "e1000e: Separate signaling for link check/link up" 2018-03-12 11:34:05 -07:00
ich8lan.h e1000e: fix the use of magic numbers for buffer overrun issue 2017-11-27 13:57:10 -08:00
mac.c Revert "e1000e: Separate signaling for link check/link up" 2018-03-12 11:34:05 -07:00
mac.h e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
Makefile
manage.c e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
manage.h e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
netdev.c Revert "e1000e: Separate signaling for link check/link up" 2018-03-12 11:34:05 -07:00
nvm.c e1000e: use BIT() macro for bit defines 2016-05-13 15:15:36 -07:00
nvm.h e1000e: Bump the version to 3.2.5 2015-06-03 04:13:39 -07:00
param.c e1000e: apply burst mode settings only on default 2017-10-10 09:00:48 -07:00
phy.c e1000e: Fix error path in link detection 2017-10-10 08:17:00 -07:00
phy.h e1000e: use BIT() macro for bit defines 2016-05-13 15:15:36 -07:00
ptp.c e1000e: Add Support for CannonLake 2017-04-30 05:18:30 -07:00
regs.h e1000e: Adds hardware supported cross timestamp on e1000e nic 2016-03-03 14:28:46 -08:00