linux/drivers/usb
Anatolij Gustschin 2ea6698d7b USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller
Extend the FSL UDC driver to support MPC5121E DR USB Controller
operation in device mode. Add MPC5121E specific init/uninit
at probe and remove and isolate system interface register accesses
when running on MPC5121E SoC, as these registers are not available
on this platform. This patch relies on previous patch for supporting
big endian registers and descriptors access in the FSL UDC driver.
Additionally support endpoint FIFO status operation by providing
appropriate callback in endpoint ops structure.

Also flush cache for the req buffer used for GetStatus reply.
Without this, the correct reply to an endpoint GetStatus
is written to 'req', but doesn't make it out to the USB bus
since the buffer hasn't been flushed. This would cause the
USBCV Halt Endpoint test to fail (according to changelog in
Freescale LTIB driver code).

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02 16:59:37 -07:00
..
atm Fix common misspellings 2011-03-31 11:26:23 -03:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class USB: cdc-wdm: reset handling according to new requirements 2011-04-29 17:04:40 -07:00
core usb: core: Change usb_create_sysfs_intf_files()' return type to void 2011-04-29 17:24:38 -07:00
early Fix common misspellings 2011-03-31 11:26:23 -03:00
gadget USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller 2011-05-02 16:59:37 -07:00
host USB: ehci-fsl: add MPC5121E specific suspend and resume 2011-05-02 16:59:36 -07:00
image Fix common misspellings 2011-03-31 11:26:23 -03:00
misc usb/usbtest: fix test10 on superpseed 2011-05-02 16:39:08 -07:00
mon USB: usbmon: fix-up docs and text API for sparse ISO 2011-02-04 11:46:57 -08:00
musb usb: musb: omap2430: fix build failure 2011-04-13 15:44:02 -07:00
otg usb: factor out state_string() on otg drivers 2011-05-02 16:39:09 -07:00
renesas_usbhs usb: renesas_usbhs: add autonomy mode 2011-04-29 17:24:35 -07:00
serial Bind only modem AT command endpoint to option module. 2011-04-29 17:05:06 -07:00
storage Fix common misspellings 2011-03-31 11:26:23 -03:00
wusbcore Fix common misspellings 2011-03-31 11:26:23 -03:00
Kconfig Merge 2.6.39-rc4 into usb-next 2011-04-19 05:50:38 -07:00
Makefile USB: fix build of FSL MPH DR OF platform driver 2011-05-02 16:59:37 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.