linux/arch/arm/boot/dts/ste-href.dtsi
Linus Walleij 2ce05a14bb ARM: ux500: fix devicetree builds
The patch set beginning with commit:
"ARM: ux500: Apply a ste-* prefix onto snowball.dts"
thru commit:
"ARM: ux500: Remove u9540.dts as it's been replaced"
altered the names of the ux500 device tree files but forgot
to:

- Rename the ccu8540-pinctrl.dtsi file

- Update #include statements from files using these
  files, so the build broke.

- Update the Makefile for the device trees so the build
  broke.

Fix it up so we can build them all again.

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2013-08-14 22:32:07 +02:00

302 lines
6.0 KiB
Plaintext

/*
* Copyright 2012 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "ste-dbx5x0.dtsi"
/ {
memory {
reg = <0x00000000 0x20000000>;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
linux,code = <11>;
label = "SFH7741 Proximity Sensor";
};
};
soc {
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
i2c@80004000 {
tc3589x@42 {
compatible = "tc3589x";
reg = <0x42>;
interrupt-parent = <&gpio6>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
interrupts = <0 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
i2c@80128000 {
lp5521@33 {
compatible = "national,lp5521";
reg = <0x33>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
chan0 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan1 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
lp5521@34 {
compatible = "national,lp5521";
reg = <0x34>;
label = "lp5521_sec";
clock-mode = /bits/ 8 <2>;
chan0 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan1 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
chan2 {
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
};
bh1780@29 {
compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
cd-gpios = <&tc3589x_gpio 3 0x4>;
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
};
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
status = "okay";
};
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
};
msp1: msp@80124000 {
status = "okay";
};
msp3: msp@80125000 {
status = "okay";
};
prcmu@80157000 {
db8500-prcmu-regulators {
db8500_vape_reg: db8500_vape {
regulator-name = "db8500-vape";
};
db8500_varm_reg: db8500_varm {
regulator-name = "db8500-varm";
};
db8500_vmodem_reg: db8500_vmodem {
regulator-name = "db8500-vmodem";
};
db8500_vpll_reg: db8500_vpll {
regulator-name = "db8500-vpll";
};
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-name = "db8500-vsmps1";
};
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-name = "db8500-vsmps2";
};
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-name = "db8500-vsmps3";
};
db8500_vrf1_reg: db8500_vrf1 {
regulator-name = "db8500-vrf1";
};
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-name = "db8500-sva-mmdsp";
};
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-name = "db8500-sva-mmdsp-ret";
};
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-name = "db8500_sva_pipe";
};
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-name = "db8500_sia_mmdsp";
};
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
regulator-name = "db8500-sia-mmdsp-ret";
};
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-name = "db8500-sia-pipe";
};
db8500_sga_reg: db8500_sga {
regulator-name = "db8500-sga";
};
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-name = "db8500-b2r2-mcde";
};
db8500_esram12_reg: db8500_esram12 {
regulator-name = "db8500-esram12";
};
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-name = "db8500-esram12-ret";
};
db8500_esram34_reg: db8500_esram34 {
regulator-name = "db8500-esram34";
};
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-name = "db8500-esram34-ret";
};
};
ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
};
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
};
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-name = "dummy";
};
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
};
};
};
};