linux/include/asm-mips/mips-boards/maltaint.h
Atsushi Nemoto 97dcb82de6 [MIPS] Define MIPS_CPU_IRQ_BASE in generic header
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all
platforms and are same value on most platforms (0 or 16, depends on
CONFIG_I8259).  Define them in asm-mips/mach-generic/irq.h and make
them customizable.  This will save a few cycle on each CPU interrupt.

A good side effect is removing some dependencies to MALTA in generic
SMTC code.

Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq
mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing
them might cause some header dependency problem and there seems no
good reason to customize it.  So currently only VR41XX is using custom
MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259.

Testing this patch on those platforms is greatly appreciated.  Thank
you.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:08 +00:00

90 lines
2.5 KiB
C

/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Defines for the Malta interrupt controller.
*
*/
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
#include <irq.h>
/*
* Interrupts 0..15 are used for Malta ISA compatible interrupts
*/
#define MALTA_INT_BASE 0
/*
* Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
*/
#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#define MIPSCPU_INT_SW1 1
#define MIPSCPU_INT_MB0 2
#define MIPSCPU_INT_I8259A MIPSCPU_INT_MB0
#define MIPSCPU_INT_MB1 3
#define MIPSCPU_INT_SMI MIPSCPU_INT_MB1
#define MIPSCPU_INT_MB2 4
#define MIPSCPU_INT_MB3 5
#define MIPSCPU_INT_COREHI MIPSCPU_INT_MB3
#define MIPSCPU_INT_MB4 6
#define MIPSCPU_INT_CORELO MIPSCPU_INT_MB4
#define MIPSCPU_INT_CPUCTR 7
/*
* Interrupts 64..127 are used for Soc-it Classic interrupts
*/
#define MSC01C_INT_BASE 64
/* SOC-it Classic interrupt offsets */
#define MSC01C_INT_TMR 0
#define MSC01C_INT_PCI 1
/*
* Interrupts 64..127 are used for Soc-it EIC interrupts
*/
#define MSC01E_INT_BASE 64
/* SOC-it EIC interrupt offsets */
#define MSC01E_INT_SW0 1
#define MSC01E_INT_SW1 2
#define MSC01E_INT_MB0 3
#define MSC01E_INT_I8259A MSC01E_INT_MB0
#define MSC01E_INT_MB1 4
#define MSC01E_INT_SMI MSC01E_INT_MB1
#define MSC01E_INT_MB2 5
#define MSC01E_INT_MB3 6
#define MSC01E_INT_COREHI MSC01E_INT_MB3
#define MSC01E_INT_MB4 7
#define MSC01E_INT_CORELO MSC01E_INT_MB4
#define MSC01E_INT_TMR 8
#define MSC01E_INT_PCI 9
#define MSC01E_INT_PERFCTR 10
#define MSC01E_INT_CPUCTR 11
#ifndef __ASSEMBLY__
extern void maltaint_init(void);
#endif
#endif /* !(_MIPS_MALTAINT_H) */