linux/arch/arm/boot/dts/prima2.dtsi
Barry Song eb8b8f2e71 clk: prima2: enable dt-binding clkdev mapping
this patche deletes hard code that registers clkdev by things like:
clk_register_clkdev(clk, NULL, "b0030000.nand");
clk_register_clkdev(clk, NULL, "b0040000.audio");
clk_register_clkdev(clk, NULL, "b0080000.usp");
prima2 clock controller becomes a clock provider and  every dt node
just declares its clock sources by dt prop.

it also makes us easier to extend this driver to support both prima2
and marco as marco has different address mapping with prima2.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-18 09:44:01 -08:00

670 lines
18 KiB
Plaintext

/*
* DTS file for CSR SiRFprimaII SoC
*
* Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "sirf,prima2";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
/* from bootloader */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0x80000000>;
l2-cache-controller@80040000 {
compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <1 1 1>;
arm,filter-ranges = <0 0x40000000>;
};
intc: interrupt-controller@80020000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "sirf,prima2-intc";
reg = <0x80020000 0x1000>;
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
clks: clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
#clock-cells = <1>;
};
reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
rsc-controller@88020000 {
compatible = "sirf,prima2-rsc";
reg = <0x88020000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90000000 0x90000000 0x10000>;
memory-controller@90000000 {
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x10000>;
interrupts = <27>;
clocks = <&clks 5>;
};
};
disp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90010000 0x90010000 0x30000>;
display@90010000 {
compatible = "sirf,prima2-lcd";
reg = <0x90010000 0x20000>;
interrupts = <30>;
};
vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x98000000 0x98000000 0x8000000>;
graphics@98000000 {
compatible = "powervr,sgx531";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
clocks = <&clks 32>;
};
};
multimedia-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa0000000 0xa0000000 0x8000000>;
multimedia@a0000000 {
compatible = "sirf,prima2-video-codec";
reg = <0xa0000000 0x8000000>;
interrupts = <5>;
clocks = <&clks 33>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa8000000 0xa8000000 0x2000000>;
dspif@a8000000 {
compatible = "sirf,prima2-dspif";
reg = <0xa8000000 0x10000>;
interrupts = <9>;
};
gps@a8010000 {
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
clocks = <&clks 9>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
clocks = <&clks 8>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
reg = <0xb0020000 0x1000>;
interrupts = <0>;
};
nand@b0030000 {
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
clocks = <&clks 26>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
clocks = <&clks 27>;
};
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
interrupts = <17>;
clocks = <&clks 13>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
interrupts = <18>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
interrupts = <19>;
clocks = <&clks 15>;
};
usp0: usp@b0080000 {
cell-index = <0>;
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
clocks = <&clks 28>;
};
usp1: usp@b0090000 {
cell-index = <1>;
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
clocks = <&clks 29>;
};
usp2: usp@b00a0000 {
cell-index = <2>;
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
clocks = <&clks 30>;
};
dmac0: dma-controller@b00b0000 {
cell-index = <0>;
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
clocks = <&clks 24>;
};
dmac1: dma-controller@b0160000 {
cell-index = <1>;
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
clocks = <&clks 25>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
};
spi0: spi@b00d0000 {
cell-index = <0>;
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
clocks = <&clks 19>;
};
spi1: spi@b0170000 {
cell-index = <1>;
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
clocks = <&clks 20>;
};
i2c0: i2c@b00e0000 {
cell-index = <0>;
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
clocks = <&clks 17>;
};
i2c1: i2c@b00f0000 {
cell-index = <1>;
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
clocks = <&clks 18>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
clocks = <&clks 16>;
};
gpio: pinctrl@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,prima2-pinctrl";
reg = <0xb0120000 0x10000>;
interrupts = <43 44 45 46 47>;
gpio-controller;
interrupt-controller;
lcd_16pins_a: lcd0@0 {
lcd {
sirf,pins = "lcd_16bitsgrp";
sirf,function = "lcd_16bits";
};
};
lcd_18pins_a: lcd0@1 {
lcd {
sirf,pins = "lcd_18bitsgrp";
sirf,function = "lcd_18bits";
};
};
lcd_24pins_a: lcd0@2 {
lcd {
sirf,pins = "lcd_24bitsgrp";
sirf,function = "lcd_24bits";
};
};
lcdrom_pins_a: lcdrom0@0 {
lcd {
sirf,pins = "lcdromgrp";
sirf,function = "lcdrom";
};
};
uart0_pins_a: uart0@0 {
uart {
sirf,pins = "uart0grp";
sirf,function = "uart0";
};
};
uart1_pins_a: uart1@0 {
uart {
sirf,pins = "uart1grp";
sirf,function = "uart1";
};
};
uart2_pins_a: uart2@0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2@1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
spi0_pins_a: spi0@0 {
spi {
sirf,pins = "spi0grp";
sirf,function = "spi0";
};
};
spi1_pins_a: spi1@0 {
spi {
sirf,pins = "spi1grp";
sirf,function = "spi1";
};
};
i2c0_pins_a: i2c0@0 {
i2c {
sirf,pins = "i2c0grp";
sirf,function = "i2c0";
};
};
i2c1_pins_a: i2c1@0 {
i2c {
sirf,pins = "i2c1grp";
sirf,function = "i2c1";
};
};
pwm0_pins_a: pwm0@0 {
pwm {
sirf,pins = "pwm0grp";
sirf,function = "pwm0";
};
};
pwm1_pins_a: pwm1@0 {
pwm {
sirf,pins = "pwm1grp";
sirf,function = "pwm1";
};
};
pwm2_pins_a: pwm2@0 {
pwm {
sirf,pins = "pwm2grp";
sirf,function = "pwm2";
};
};
pwm3_pins_a: pwm3@0 {
pwm {
sirf,pins = "pwm3grp";
sirf,function = "pwm3";
};
};
gps_pins_a: gps@0 {
gps {
sirf,pins = "gpsgrp";
sirf,function = "gps";
};
};
vip_pins_a: vip@0 {
vip {
sirf,pins = "vipgrp";
sirf,function = "vip";
};
};
sdmmc0_pins_a: sdmmc0@0 {
sdmmc0 {
sirf,pins = "sdmmc0grp";
sirf,function = "sdmmc0";
};
};
sdmmc1_pins_a: sdmmc1@0 {
sdmmc1 {
sirf,pins = "sdmmc1grp";
sirf,function = "sdmmc1";
};
};
sdmmc2_pins_a: sdmmc2@0 {
sdmmc2 {
sirf,pins = "sdmmc2grp";
sirf,function = "sdmmc2";
};
};
sdmmc3_pins_a: sdmmc3@0 {
sdmmc3 {
sirf,pins = "sdmmc3grp";
sirf,function = "sdmmc3";
};
};
sdmmc4_pins_a: sdmmc4@0 {
sdmmc4 {
sirf,pins = "sdmmc4grp";
sirf,function = "sdmmc4";
};
};
sdmmc5_pins_a: sdmmc5@0 {
sdmmc5 {
sirf,pins = "sdmmc5grp";
sirf,function = "sdmmc5";
};
};
i2s_pins_a: i2s@0 {
i2s {
sirf,pins = "i2sgrp";
sirf,function = "i2s";
};
};
ac97_pins_a: ac97@0 {
ac97 {
sirf,pins = "ac97grp";
sirf,function = "ac97";
};
};
nand_pins_a: nand@0 {
nand {
sirf,pins = "nandgrp";
sirf,function = "nand";
};
};
usp0_pins_a: usp0@0 {
usp0 {
sirf,pins = "usp0grp";
sirf,function = "usp0";
};
};
usp1_pins_a: usp1@0 {
usp1 {
sirf,pins = "usp1grp";
sirf,function = "usp1";
};
};
usp2_pins_a: usp2@0 {
usp2 {
sirf,pins = "usp2grp";
sirf,function = "usp2";
};
};
usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
usb0_utmi_drvbus {
sirf,pins = "usb0_utmi_drvbusgrp";
sirf,function = "usb0_utmi_drvbus";
};
};
usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
usb1_utmi_drvbus {
sirf,pins = "usb1_utmi_drvbusgrp";
sirf,function = "usb1_utmi_drvbus";
};
};
warm_rst_pins_a: warm_rst@0 {
warm_rst {
sirf,pins = "warm_rstgrp";
sirf,function = "warm_rst";
};
};
pulse_count_pins_a: pulse_count@0 {
pulse_count {
sirf,pins = "pulse_countgrp";
sirf,function = "pulse_count";
};
};
cko0_rst_pins_a: cko0_rst@0 {
cko0_rst {
sirf,pins = "cko0_rstgrp";
sirf,function = "cko0_rst";
};
};
cko1_rst_pins_a: cko1_rst@0 {
cko1_rst {
sirf,pins = "cko1_rstgrp";
sirf,function = "cko1_rst";
};
};
};
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
clocks = <&clks 21>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
clocks = <&clks 22>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
clocks = <&clks 23>;
};
pci-iobg {
compatible = "sirf,prima2-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x56000000 0x56000000 0x1b00000>;
sd0: sdhci@56000000 {
cell-index = <0>;
compatible = "sirf,prima2-sdhc";
reg = <0x56000000 0x100000>;
interrupts = <38>;
};
sd1: sdhci@56100000 {
cell-index = <1>;
compatible = "sirf,prima2-sdhc";
reg = <0x56100000 0x100000>;
interrupts = <38>;
};
sd2: sdhci@56200000 {
cell-index = <2>;
compatible = "sirf,prima2-sdhc";
reg = <0x56200000 0x100000>;
interrupts = <23>;
};
sd3: sdhci@56300000 {
cell-index = <3>;
compatible = "sirf,prima2-sdhc";
reg = <0x56300000 0x100000>;
interrupts = <23>;
};
sd4: sdhci@56400000 {
cell-index = <4>;
compatible = "sirf,prima2-sdhc";
reg = <0x56400000 0x100000>;
interrupts = <39>;
};
sd5: sdhci@56500000 {
cell-index = <5>;
compatible = "sirf,prima2-sdhc";
reg = <0x56500000 0x100000>;
interrupts = <39>;
};
pci-copy@57900000 {
compatible = "sirf,prima2-pcicp";
reg = <0x57900000 0x100000>;
interrupts = <40>;
};
rom-interface@57a00000 {
compatible = "sirf,prima2-romif";
reg = <0x57a00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,prima2-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <55 56 57>;
};
sysrtc@2000 {
compatible = "sirf,prima2-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <52 53 54>;
};
pwrc@3000 {
compatible = "sirf,prima2-pwrc";
reg = <0x3000 0x1000>;
interrupts = <32>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb8000000 0xb8000000 0x40000>;
usb0: usb@b00e0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
clocks = <&clks 40>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
clocks = <&clks 41>;
};
sata@b00f0000 {
compatible = "synopsys,dwc-ahsata";
reg = <0xb8020000 0x10000>;
interrupts = <37>;
};
security@b00f0000 {
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
clocks = <&clks 7>;
};
};
};
};