linux/drivers/net/wireless/ath/ath9k
Martin Blumenstingl 291478b7b3 ath9k: indicate that the AR9003 EEPROM template values are little endian
The eepMisc field was not set explicitly. The default value of 0 means
that the values in the EEPROM (template) should be interpreted as little
endian. However, this is not clear until comparing the AR9003 code with
the other EEPROM formats.
To make the code easier to understand we explicitly state that the values
are little endian - there are no functional changes with this patch.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-15 10:26:17 +02:00
..
ahb.c ath9k: constify ath_bus_ops structure 2016-12-01 13:17:45 +02:00
ani.c ath9k: clean up ANI per-channel pointer checking 2016-01-26 16:47:38 +02:00
ani.h
antenna.c
ar953x_initvals.h ath9k: Update QCA953x initvals 2016-03-11 13:59:56 +02:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2016-03-11 13:59:58 +02:00
ar956x_initvals.h ath9k: Update QCA956x initvals 2016-03-11 13:59:59 +02:00
ar5008_initvals.h
ar5008_phy.c ath9k: remove repetitions of mask array size 2016-09-09 15:12:18 +03:00
ar9001_initvals.h
ar9002_calib.c ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY 2015-03-30 11:31:30 +03:00
ar9002_hw.c
ar9002_initvals.h
ar9002_mac.c
ar9002_phy.c ath9k_hw: fix spectral scan on AR9285 and newer 2016-07-19 20:58:07 +03:00
ar9002_phy.h ath9k_hw: fix spectral scan on AR9285 and newer 2016-07-19 20:58:07 +03:00
ar9003_2p2_initvals.h ath9k: Update AR9003 2.2 initvals 2016-03-11 13:59:56 +02:00
ar9003_aic.c ath9k: reduce stack usage in ar9003_aic_cal_post_process 2016-03-03 19:27:17 +02:00
ar9003_aic.h ath9k: reduce stack usage in ar9003_aic_cal_post_process 2016-03-03 19:27:17 +02:00
ar9003_buffalo_initvals.h
ar9003_calib.c Revert "ath9k_hw: implement temperature compensation support for AR9003+" 2016-10-13 14:11:30 +03:00
ar9003_eeprom.c ath9k: indicate that the AR9003 EEPROM template values are little endian 2016-12-15 10:26:17 +02:00
ar9003_eeprom.h ath9k: indicate that the AR9003 EEPROM template values are little endian 2016-12-15 10:26:17 +02:00
ar9003_hw.c ath9k_hw: add low power tx gain table for AR953x 2016-01-26 16:47:38 +02:00
ar9003_mac.c
ar9003_mac.h
ar9003_mci.c ath9k: make GPIO API to support both of WMAC and SOC 2016-03-11 14:00:02 +02:00
ar9003_mci.h ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
ar9003_paprd.c
ar9003_phy.c ath9k: Fix symbol overlap window for half/quarter channels 2016-05-09 21:12:01 +03:00
ar9003_phy.h ath9k_hw: fix duplicate (and partially wrong) definition of AR_CH0_THERM 2016-07-19 20:59:04 +03:00
ar9003_rtt.c ath9k: Fix RTT chainmask usage 2015-03-13 15:19:36 +02:00
ar9003_rtt.h
ar9003_wow.c ath9k: Restart TSF2 timers on wakeup 2015-02-26 14:58:46 +02:00
ar9330_1p1_initvals.h ath9k: Update AR933x initvals 2016-03-11 13:59:57 +02:00
ar9330_1p2_initvals.h ath9k: Update AR933x initvals 2016-03-11 13:59:57 +02:00
ar9340_initvals.h ath9k: Update AR9340 initvals 2016-03-11 13:59:57 +02:00
ar9462_2p0_initvals.h ath9k: Update AR9462 initvals 2016-03-11 13:59:57 +02:00
ar9462_2p1_initvals.h ath9k: Update AR9462 initvals 2016-03-11 13:59:57 +02:00
ar9485_initvals.h ath9k: Update AR9485 initvals 2016-03-11 13:59:58 +02:00
ar9565_1p0_initvals.h ath9k: Update AR9565 initvals 2016-03-11 13:59:58 +02:00
ar9565_1p1_initvals.h
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2016-03-11 13:59:59 +02:00
ath9k.h ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
beacon.c ath9k: Fix beacon configuration for addition/removal of interfaces 2016-07-08 17:03:41 +03:00
btcoex.c ath9k: fix BTCoex configuration for SOC chips 2016-03-11 14:00:04 +02:00
btcoex.h ath9k: fix BTCoex configuration for SOC chips 2016-03-11 14:00:04 +02:00
calib.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
calib.h
channel.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
common-beacon.c ath9k: remove ath9k_mod_tsf64_tu 2015-12-08 16:51:05 +02:00
common-beacon.h
common-debug.c ath9k: fix phyerror codes 2015-10-28 20:57:13 +02:00
common-debug.h
common-init.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
common-init.h
common-spectral.c ath9k: fix NULL pointer dereference 2016-11-23 15:59:38 +02:00
common-spectral.h ath9k: Move processing of FFT frames to different functions 2015-05-09 16:46:11 +03:00
common.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
common.h ath9k: Fix beacon configuration for addition/removal of interfaces 2016-07-08 17:03:41 +03:00
debug_sta.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
debug.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
debug.h ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
dfs_debug.c
dfs_debug.h
dfs.c ath9k: DFS - add pulse chirp detection for FCC 2015-07-11 19:51:53 +03:00
dfs.h
dynack.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
dynack.h
eeprom_4k.c ath9k: Add a #define for the EEPROM "eepmisc" endianness bit 2016-12-15 10:26:11 +02:00
eeprom_9287.c ath9k: Add a #define for the EEPROM "eepmisc" endianness bit 2016-12-15 10:26:11 +02:00
eeprom_def.c ath9k: Add a #define for the EEPROM "eepmisc" endianness bit 2016-12-15 10:26:11 +02:00
eeprom.c ath9k: simplify the code-paths when not using the built-in EEPROM 2016-07-19 20:57:14 +03:00
eeprom.h ath9k: Add a #define for the EEPROM "eepmisc" endianness bit 2016-12-15 10:26:11 +02:00
gpio.c ath9k: mark ath_fill_led_pin() static 2016-09-02 19:06:05 +03:00
hif_usb.c ath9k_htc: don't use HZ for usb msg timeouts 2016-12-01 13:18:33 +02:00
hif_usb.h ath9k_htc: don't use HZ for usb msg timeouts 2016-12-01 13:18:33 +02:00
htc_drv_beacon.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
htc_drv_debug.c wireless: use %*pb[l] to print bitmaps including cpumasks and nodemasks 2015-02-13 21:21:38 -08:00
htc_drv_gpio.c ath9k: free GPIO resource for SOC GPIOs 2016-03-11 14:00:02 +02:00
htc_drv_init.c ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
htc_drv_main.c Merge ath-next from ath.git 2016-04-26 14:13:59 +03:00
htc_drv_txrx.c cfg80211: remove enum ieee80211_band 2016-04-12 15:56:15 +02:00
htc_hst.c ath9k_htc: fix minor mistakes in dev_err messages 2016-11-15 16:57:47 +02:00
htc_hst.h
htc.h ath9k_htc: add support of channel switch 2015-06-15 12:44:34 +03:00
hw-ops.h ath9k: Register private AIC ops 2015-03-20 08:27:17 +02:00
hw.c ath9k: fix ath9k_hw_gpio_get() to return 0 or 1 on success 2016-11-23 15:58:21 +02:00
hw.h Revert "ath9k_hw: implement temperature compensation support for AR9003+" 2016-10-13 14:11:30 +03:00
init.c wireless-drivers-next patches for 4.10 2016-11-27 20:26:59 -05:00
Kconfig ath9k: disable RNG by default 2016-09-28 12:59:49 +03:00
link.c ath9k: match wait_for_completion_timeout return type 2015-08-13 15:27:12 +03:00
mac.c ath9k: Add QCA956x HW support 2015-01-15 14:25:03 +02:00
mac.h ath9k: Remove some #defined constants to decrease verbosity 2016-07-08 17:03:37 +03:00
main.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00
Makefile ath9k: feeding entropy in kernel from ADC capture 2015-12-11 14:08:58 +02:00
mci.c ath9k: Fix GPM initialization 2015-03-03 14:55:24 +02:00
mci.h
pci.c ath9k: Really fix LED polarity for some Mini PCI AR9220 MB92 cards. 2016-11-15 16:52:16 +02:00
phy.h
recv.c ath9k: feed only active spectral / dfs-detector 2016-12-01 12:29:24 +02:00
reg_aic.h ath9k: Add register definitions for AIC 2015-03-20 08:27:19 +02:00
reg_mci.h ath9k: Mute BT properly 2015-03-03 14:55:27 +02:00
reg_wow.h ath9k: Clear additional WoW events 2015-02-26 14:58:43 +02:00
reg.h ath9k: fix GPIO mask for AR9462 and AR9565 2016-06-14 16:21:31 +03:00
rng.c ath9k: change entropy formula for easier understanding 2016-10-13 17:22:44 +03:00
tx99.c ath9k: Proper TX99 interrupt ref count 2016-05-28 11:24:25 +03:00
wmi.c ath9k_htc: wmi: match wait_for_completion_timeout return type 2015-08-13 15:26:19 +03:00
wmi.h ath9k_htc: check seq number instead of cmd id for timeout 2015-04-07 20:07:44 +03:00
wow.c ath9k: Register correct WOW details with mac80211 2015-02-06 08:39:21 +02:00
xmit.c ath9k: Switch to using mac80211 intermediate software queues. 2016-11-15 17:00:04 +02:00