forked from Minki/linux
288379f050
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1
, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3245 lines
80 KiB
C
3245 lines
80 KiB
C
/* $Id: sungem.c,v 1.44.2.22 2002/03/13 01:18:12 davem Exp $
|
|
* sungem.c: Sun GEM ethernet driver.
|
|
*
|
|
* Copyright (C) 2000, 2001, 2002, 2003 David S. Miller (davem@redhat.com)
|
|
*
|
|
* Support for Apple GMAC and assorted PHYs, WOL, Power Management
|
|
* (C) 2001,2002,2003 Benjamin Herrenscmidt (benh@kernel.crashing.org)
|
|
* (C) 2004,2005 Benjamin Herrenscmidt, IBM Corp.
|
|
*
|
|
* NAPI and NETPOLL support
|
|
* (C) 2004 by Eric Lemoine (eric.lemoine@gmail.com)
|
|
*
|
|
* TODO:
|
|
* - Now that the driver was significantly simplified, I need to rework
|
|
* the locking. I'm sure we don't need _2_ spinlocks, and we probably
|
|
* can avoid taking most of them for so long period of time (and schedule
|
|
* instead). The main issues at this point are caused by the netdev layer
|
|
* though:
|
|
*
|
|
* gem_change_mtu() and gem_set_multicast() are called with a read_lock()
|
|
* help by net/core/dev.c, thus they can't schedule. That means they can't
|
|
* call napi_disable() neither, thus force gem_poll() to keep a spinlock
|
|
* where it could have been dropped. change_mtu especially would love also to
|
|
* be able to msleep instead of horrid locked delays when resetting the HW,
|
|
* but that read_lock() makes it impossible, unless I defer it's action to
|
|
* the reset task, which means it'll be asynchronous (won't take effect until
|
|
* the system schedules a bit).
|
|
*
|
|
* Also, it would probably be possible to also remove most of the long-life
|
|
* locking in open/resume code path (gem_reinit_chip) by beeing more careful
|
|
* about when we can start taking interrupts or get xmit() called...
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/random.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/mm.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/irq.h>
|
|
|
|
#ifdef CONFIG_SPARC
|
|
#include <asm/idprom.h>
|
|
#include <asm/prom.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#endif
|
|
|
|
#include "sungem_phy.h"
|
|
#include "sungem.h"
|
|
|
|
/* Stripping FCS is causing problems, disabled for now */
|
|
#undef STRIP_FCS
|
|
|
|
#define DEFAULT_MSG (NETIF_MSG_DRV | \
|
|
NETIF_MSG_PROBE | \
|
|
NETIF_MSG_LINK)
|
|
|
|
#define ADVERTISE_MASK (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
|
|
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
|
|
SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full | \
|
|
SUPPORTED_Pause | SUPPORTED_Autoneg)
|
|
|
|
#define DRV_NAME "sungem"
|
|
#define DRV_VERSION "0.98"
|
|
#define DRV_RELDATE "8/24/03"
|
|
#define DRV_AUTHOR "David S. Miller (davem@redhat.com)"
|
|
|
|
static char version[] __devinitdata =
|
|
DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " " DRV_AUTHOR "\n";
|
|
|
|
MODULE_AUTHOR(DRV_AUTHOR);
|
|
MODULE_DESCRIPTION("Sun GEM Gbit ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define GEM_MODULE_NAME "gem"
|
|
#define PFX GEM_MODULE_NAME ": "
|
|
|
|
static struct pci_device_id gem_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_GEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
|
|
/* These models only differ from the original GEM in
|
|
* that their tx/rx fifos are of a different size and
|
|
* they only support 10/100 speeds. -DaveM
|
|
*
|
|
* Apple's GMAC does support gigabit on machines with
|
|
* the BCM54xx PHYs. -BenH
|
|
*/
|
|
{ PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_RIO_GEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_GMAC,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_GMACP,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_GMAC2,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_GMAC,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_SUNGEM,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID2_GMAC,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, gem_pci_tbl);
|
|
|
|
static u16 __phy_read(struct gem *gp, int phy_addr, int reg)
|
|
{
|
|
u32 cmd;
|
|
int limit = 10000;
|
|
|
|
cmd = (1 << 30);
|
|
cmd |= (2 << 28);
|
|
cmd |= (phy_addr << 23) & MIF_FRAME_PHYAD;
|
|
cmd |= (reg << 18) & MIF_FRAME_REGAD;
|
|
cmd |= (MIF_FRAME_TAMSB);
|
|
writel(cmd, gp->regs + MIF_FRAME);
|
|
|
|
while (limit--) {
|
|
cmd = readl(gp->regs + MIF_FRAME);
|
|
if (cmd & MIF_FRAME_TALSB)
|
|
break;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
if (!limit)
|
|
cmd = 0xffff;
|
|
|
|
return cmd & MIF_FRAME_DATA;
|
|
}
|
|
|
|
static inline int _phy_read(struct net_device *dev, int mii_id, int reg)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
return __phy_read(gp, mii_id, reg);
|
|
}
|
|
|
|
static inline u16 phy_read(struct gem *gp, int reg)
|
|
{
|
|
return __phy_read(gp, gp->mii_phy_addr, reg);
|
|
}
|
|
|
|
static void __phy_write(struct gem *gp, int phy_addr, int reg, u16 val)
|
|
{
|
|
u32 cmd;
|
|
int limit = 10000;
|
|
|
|
cmd = (1 << 30);
|
|
cmd |= (1 << 28);
|
|
cmd |= (phy_addr << 23) & MIF_FRAME_PHYAD;
|
|
cmd |= (reg << 18) & MIF_FRAME_REGAD;
|
|
cmd |= (MIF_FRAME_TAMSB);
|
|
cmd |= (val & MIF_FRAME_DATA);
|
|
writel(cmd, gp->regs + MIF_FRAME);
|
|
|
|
while (limit--) {
|
|
cmd = readl(gp->regs + MIF_FRAME);
|
|
if (cmd & MIF_FRAME_TALSB)
|
|
break;
|
|
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static inline void _phy_write(struct net_device *dev, int mii_id, int reg, int val)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
__phy_write(gp, mii_id, reg, val & 0xffff);
|
|
}
|
|
|
|
static inline void phy_write(struct gem *gp, int reg, u16 val)
|
|
{
|
|
__phy_write(gp, gp->mii_phy_addr, reg, val);
|
|
}
|
|
|
|
static inline void gem_enable_ints(struct gem *gp)
|
|
{
|
|
/* Enable all interrupts but TXDONE */
|
|
writel(GREG_STAT_TXDONE, gp->regs + GREG_IMASK);
|
|
}
|
|
|
|
static inline void gem_disable_ints(struct gem *gp)
|
|
{
|
|
/* Disable all interrupts, including TXDONE */
|
|
writel(GREG_STAT_NAPI | GREG_STAT_TXDONE, gp->regs + GREG_IMASK);
|
|
}
|
|
|
|
static void gem_get_cell(struct gem *gp)
|
|
{
|
|
BUG_ON(gp->cell_enabled < 0);
|
|
gp->cell_enabled++;
|
|
#ifdef CONFIG_PPC_PMAC
|
|
if (gp->cell_enabled == 1) {
|
|
mb();
|
|
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, gp->of_node, 0, 1);
|
|
udelay(10);
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
}
|
|
|
|
/* Turn off the chip's clock */
|
|
static void gem_put_cell(struct gem *gp)
|
|
{
|
|
BUG_ON(gp->cell_enabled <= 0);
|
|
gp->cell_enabled--;
|
|
#ifdef CONFIG_PPC_PMAC
|
|
if (gp->cell_enabled == 0) {
|
|
mb();
|
|
pmac_call_feature(PMAC_FTR_GMAC_ENABLE, gp->of_node, 0, 0);
|
|
udelay(10);
|
|
}
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
}
|
|
|
|
static void gem_handle_mif_event(struct gem *gp, u32 reg_val, u32 changed_bits)
|
|
{
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: mif interrupt\n", gp->dev->name);
|
|
}
|
|
|
|
static int gem_pcs_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 pcs_istat = readl(gp->regs + PCS_ISTAT);
|
|
u32 pcs_miistat;
|
|
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: pcs interrupt, pcs_istat: 0x%x\n",
|
|
gp->dev->name, pcs_istat);
|
|
|
|
if (!(pcs_istat & PCS_ISTAT_LSC)) {
|
|
printk(KERN_ERR "%s: PCS irq but no link status change???\n",
|
|
dev->name);
|
|
return 0;
|
|
}
|
|
|
|
/* The link status bit latches on zero, so you must
|
|
* read it twice in such a case to see a transition
|
|
* to the link being up.
|
|
*/
|
|
pcs_miistat = readl(gp->regs + PCS_MIISTAT);
|
|
if (!(pcs_miistat & PCS_MIISTAT_LS))
|
|
pcs_miistat |=
|
|
(readl(gp->regs + PCS_MIISTAT) &
|
|
PCS_MIISTAT_LS);
|
|
|
|
if (pcs_miistat & PCS_MIISTAT_ANC) {
|
|
/* The remote-fault indication is only valid
|
|
* when autoneg has completed.
|
|
*/
|
|
if (pcs_miistat & PCS_MIISTAT_RF)
|
|
printk(KERN_INFO "%s: PCS AutoNEG complete, "
|
|
"RemoteFault\n", dev->name);
|
|
else
|
|
printk(KERN_INFO "%s: PCS AutoNEG complete.\n",
|
|
dev->name);
|
|
}
|
|
|
|
if (pcs_miistat & PCS_MIISTAT_LS) {
|
|
printk(KERN_INFO "%s: PCS link is now up.\n",
|
|
dev->name);
|
|
netif_carrier_on(gp->dev);
|
|
} else {
|
|
printk(KERN_INFO "%s: PCS link is now down.\n",
|
|
dev->name);
|
|
netif_carrier_off(gp->dev);
|
|
/* If this happens and the link timer is not running,
|
|
* reset so we re-negotiate.
|
|
*/
|
|
if (!timer_pending(&gp->link_timer))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_txmac_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 txmac_stat = readl(gp->regs + MAC_TXSTAT);
|
|
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n",
|
|
gp->dev->name, txmac_stat);
|
|
|
|
/* Defer timer expiration is quite normal,
|
|
* don't even log the event.
|
|
*/
|
|
if ((txmac_stat & MAC_TXSTAT_DTE) &&
|
|
!(txmac_stat & ~MAC_TXSTAT_DTE))
|
|
return 0;
|
|
|
|
if (txmac_stat & MAC_TXSTAT_URUN) {
|
|
printk(KERN_ERR "%s: TX MAC xmit underrun.\n",
|
|
dev->name);
|
|
gp->net_stats.tx_fifo_errors++;
|
|
}
|
|
|
|
if (txmac_stat & MAC_TXSTAT_MPE) {
|
|
printk(KERN_ERR "%s: TX MAC max packet size error.\n",
|
|
dev->name);
|
|
gp->net_stats.tx_errors++;
|
|
}
|
|
|
|
/* The rest are all cases of one of the 16-bit TX
|
|
* counters expiring.
|
|
*/
|
|
if (txmac_stat & MAC_TXSTAT_NCE)
|
|
gp->net_stats.collisions += 0x10000;
|
|
|
|
if (txmac_stat & MAC_TXSTAT_ECE) {
|
|
gp->net_stats.tx_aborted_errors += 0x10000;
|
|
gp->net_stats.collisions += 0x10000;
|
|
}
|
|
|
|
if (txmac_stat & MAC_TXSTAT_LCE) {
|
|
gp->net_stats.tx_aborted_errors += 0x10000;
|
|
gp->net_stats.collisions += 0x10000;
|
|
}
|
|
|
|
/* We do not keep track of MAC_TXSTAT_FCE and
|
|
* MAC_TXSTAT_PCE events.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/* When we get a RX fifo overflow, the RX unit in GEM is probably hung
|
|
* so we do the following.
|
|
*
|
|
* If any part of the reset goes wrong, we return 1 and that causes the
|
|
* whole chip to be reset.
|
|
*/
|
|
static int gem_rxmac_reset(struct gem *gp)
|
|
{
|
|
struct net_device *dev = gp->dev;
|
|
int limit, i;
|
|
u64 desc_dma;
|
|
u32 val;
|
|
|
|
/* First, reset & disable MAC RX. */
|
|
writel(MAC_RXRST_CMD, gp->regs + MAC_RXRST);
|
|
for (limit = 0; limit < 5000; limit++) {
|
|
if (!(readl(gp->regs + MAC_RXRST) & MAC_RXRST_CMD))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (limit == 5000) {
|
|
printk(KERN_ERR "%s: RX MAC will not reset, resetting whole "
|
|
"chip.\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
writel(gp->mac_rx_cfg & ~MAC_RXCFG_ENAB,
|
|
gp->regs + MAC_RXCFG);
|
|
for (limit = 0; limit < 5000; limit++) {
|
|
if (!(readl(gp->regs + MAC_RXCFG) & MAC_RXCFG_ENAB))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (limit == 5000) {
|
|
printk(KERN_ERR "%s: RX MAC will not disable, resetting whole "
|
|
"chip.\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
/* Second, disable RX DMA. */
|
|
writel(0, gp->regs + RXDMA_CFG);
|
|
for (limit = 0; limit < 5000; limit++) {
|
|
if (!(readl(gp->regs + RXDMA_CFG) & RXDMA_CFG_ENABLE))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (limit == 5000) {
|
|
printk(KERN_ERR "%s: RX DMA will not disable, resetting whole "
|
|
"chip.\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
udelay(5000);
|
|
|
|
/* Execute RX reset command. */
|
|
writel(gp->swrst_base | GREG_SWRST_RXRST,
|
|
gp->regs + GREG_SWRST);
|
|
for (limit = 0; limit < 5000; limit++) {
|
|
if (!(readl(gp->regs + GREG_SWRST) & GREG_SWRST_RXRST))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (limit == 5000) {
|
|
printk(KERN_ERR "%s: RX reset command will not execute, resetting "
|
|
"whole chip.\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
/* Refresh the RX ring. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct gem_rxd *rxd = &gp->init_block->rxd[i];
|
|
|
|
if (gp->rx_skbs[i] == NULL) {
|
|
printk(KERN_ERR "%s: Parts of RX ring empty, resetting "
|
|
"whole chip.\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
rxd->status_word = cpu_to_le64(RXDCTRL_FRESH(gp));
|
|
}
|
|
gp->rx_new = gp->rx_old = 0;
|
|
|
|
/* Now we must reprogram the rest of RX unit. */
|
|
desc_dma = (u64) gp->gblock_dvma;
|
|
desc_dma += (INIT_BLOCK_TX_RING_SIZE * sizeof(struct gem_txd));
|
|
writel(desc_dma >> 32, gp->regs + RXDMA_DBHI);
|
|
writel(desc_dma & 0xffffffff, gp->regs + RXDMA_DBLOW);
|
|
writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK);
|
|
val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
|
|
((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
|
|
writel(val, gp->regs + RXDMA_CFG);
|
|
if (readl(gp->regs + GREG_BIFCFG) & GREG_BIFCFG_M66EN)
|
|
writel(((5 & RXDMA_BLANK_IPKTS) |
|
|
((8 << 12) & RXDMA_BLANK_ITIME)),
|
|
gp->regs + RXDMA_BLANK);
|
|
else
|
|
writel(((5 & RXDMA_BLANK_IPKTS) |
|
|
((4 << 12) & RXDMA_BLANK_ITIME)),
|
|
gp->regs + RXDMA_BLANK);
|
|
val = (((gp->rx_pause_off / 64) << 0) & RXDMA_PTHRESH_OFF);
|
|
val |= (((gp->rx_pause_on / 64) << 12) & RXDMA_PTHRESH_ON);
|
|
writel(val, gp->regs + RXDMA_PTHRESH);
|
|
val = readl(gp->regs + RXDMA_CFG);
|
|
writel(val | RXDMA_CFG_ENABLE, gp->regs + RXDMA_CFG);
|
|
writel(MAC_RXSTAT_RCV, gp->regs + MAC_RXMASK);
|
|
val = readl(gp->regs + MAC_RXCFG);
|
|
writel(val | MAC_RXCFG_ENAB, gp->regs + MAC_RXCFG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_rxmac_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 rxmac_stat = readl(gp->regs + MAC_RXSTAT);
|
|
int ret = 0;
|
|
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: rxmac interrupt, rxmac_stat: 0x%x\n",
|
|
gp->dev->name, rxmac_stat);
|
|
|
|
if (rxmac_stat & MAC_RXSTAT_OFLW) {
|
|
u32 smac = readl(gp->regs + MAC_SMACHINE);
|
|
|
|
printk(KERN_ERR "%s: RX MAC fifo overflow smac[%08x].\n",
|
|
dev->name, smac);
|
|
gp->net_stats.rx_over_errors++;
|
|
gp->net_stats.rx_fifo_errors++;
|
|
|
|
ret = gem_rxmac_reset(gp);
|
|
}
|
|
|
|
if (rxmac_stat & MAC_RXSTAT_ACE)
|
|
gp->net_stats.rx_frame_errors += 0x10000;
|
|
|
|
if (rxmac_stat & MAC_RXSTAT_CCE)
|
|
gp->net_stats.rx_crc_errors += 0x10000;
|
|
|
|
if (rxmac_stat & MAC_RXSTAT_LCE)
|
|
gp->net_stats.rx_length_errors += 0x10000;
|
|
|
|
/* We do not track MAC_RXSTAT_FCE and MAC_RXSTAT_VCE
|
|
* events.
|
|
*/
|
|
return ret;
|
|
}
|
|
|
|
static int gem_mac_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 mac_cstat = readl(gp->regs + MAC_CSTAT);
|
|
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: mac interrupt, mac_cstat: 0x%x\n",
|
|
gp->dev->name, mac_cstat);
|
|
|
|
/* This interrupt is just for pause frame and pause
|
|
* tracking. It is useful for diagnostics and debug
|
|
* but probably by default we will mask these events.
|
|
*/
|
|
if (mac_cstat & MAC_CSTAT_PS)
|
|
gp->pause_entered++;
|
|
|
|
if (mac_cstat & MAC_CSTAT_PRCV)
|
|
gp->pause_last_time_recvd = (mac_cstat >> 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_mif_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 mif_status = readl(gp->regs + MIF_STATUS);
|
|
u32 reg_val, changed_bits;
|
|
|
|
reg_val = (mif_status & MIF_STATUS_DATA) >> 16;
|
|
changed_bits = (mif_status & MIF_STATUS_STAT);
|
|
|
|
gem_handle_mif_event(gp, reg_val, changed_bits);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_pci_interrupt(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
u32 pci_estat = readl(gp->regs + GREG_PCIESTAT);
|
|
|
|
if (gp->pdev->vendor == PCI_VENDOR_ID_SUN &&
|
|
gp->pdev->device == PCI_DEVICE_ID_SUN_GEM) {
|
|
printk(KERN_ERR "%s: PCI error [%04x] ",
|
|
dev->name, pci_estat);
|
|
|
|
if (pci_estat & GREG_PCIESTAT_BADACK)
|
|
printk("<No ACK64# during ABS64 cycle> ");
|
|
if (pci_estat & GREG_PCIESTAT_DTRTO)
|
|
printk("<Delayed transaction timeout> ");
|
|
if (pci_estat & GREG_PCIESTAT_OTHER)
|
|
printk("<other>");
|
|
printk("\n");
|
|
} else {
|
|
pci_estat |= GREG_PCIESTAT_OTHER;
|
|
printk(KERN_ERR "%s: PCI error\n", dev->name);
|
|
}
|
|
|
|
if (pci_estat & GREG_PCIESTAT_OTHER) {
|
|
u16 pci_cfg_stat;
|
|
|
|
/* Interrogate PCI config space for the
|
|
* true cause.
|
|
*/
|
|
pci_read_config_word(gp->pdev, PCI_STATUS,
|
|
&pci_cfg_stat);
|
|
printk(KERN_ERR "%s: Read PCI cfg space status [%04x]\n",
|
|
dev->name, pci_cfg_stat);
|
|
if (pci_cfg_stat & PCI_STATUS_PARITY)
|
|
printk(KERN_ERR "%s: PCI parity error detected.\n",
|
|
dev->name);
|
|
if (pci_cfg_stat & PCI_STATUS_SIG_TARGET_ABORT)
|
|
printk(KERN_ERR "%s: PCI target abort.\n",
|
|
dev->name);
|
|
if (pci_cfg_stat & PCI_STATUS_REC_TARGET_ABORT)
|
|
printk(KERN_ERR "%s: PCI master acks target abort.\n",
|
|
dev->name);
|
|
if (pci_cfg_stat & PCI_STATUS_REC_MASTER_ABORT)
|
|
printk(KERN_ERR "%s: PCI master abort.\n",
|
|
dev->name);
|
|
if (pci_cfg_stat & PCI_STATUS_SIG_SYSTEM_ERROR)
|
|
printk(KERN_ERR "%s: PCI system error SERR#.\n",
|
|
dev->name);
|
|
if (pci_cfg_stat & PCI_STATUS_DETECTED_PARITY)
|
|
printk(KERN_ERR "%s: PCI parity error.\n",
|
|
dev->name);
|
|
|
|
/* Write the error bits back to clear them. */
|
|
pci_cfg_stat &= (PCI_STATUS_PARITY |
|
|
PCI_STATUS_SIG_TARGET_ABORT |
|
|
PCI_STATUS_REC_TARGET_ABORT |
|
|
PCI_STATUS_REC_MASTER_ABORT |
|
|
PCI_STATUS_SIG_SYSTEM_ERROR |
|
|
PCI_STATUS_DETECTED_PARITY);
|
|
pci_write_config_word(gp->pdev,
|
|
PCI_STATUS, pci_cfg_stat);
|
|
}
|
|
|
|
/* For all PCI errors, we should reset the chip. */
|
|
return 1;
|
|
}
|
|
|
|
/* All non-normal interrupt conditions get serviced here.
|
|
* Returns non-zero if we should just exit the interrupt
|
|
* handler right now (ie. if we reset the card which invalidates
|
|
* all of the other original irq status bits).
|
|
*/
|
|
static int gem_abnormal_irq(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
if (gem_status & GREG_STAT_RXNOBUF) {
|
|
/* Frame arrived, no free RX buffers available. */
|
|
if (netif_msg_rx_err(gp))
|
|
printk(KERN_DEBUG "%s: no buffer for rx frame\n",
|
|
gp->dev->name);
|
|
gp->net_stats.rx_dropped++;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_RXTAGERR) {
|
|
/* corrupt RX tag framing */
|
|
if (netif_msg_rx_err(gp))
|
|
printk(KERN_DEBUG "%s: corrupt rx tag framing\n",
|
|
gp->dev->name);
|
|
gp->net_stats.rx_errors++;
|
|
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_PCS) {
|
|
if (gem_pcs_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_TXMAC) {
|
|
if (gem_txmac_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_RXMAC) {
|
|
if (gem_rxmac_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_MAC) {
|
|
if (gem_mac_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_MIF) {
|
|
if (gem_mif_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
if (gem_status & GREG_STAT_PCIERR) {
|
|
if (gem_pci_interrupt(dev, gp, gem_status))
|
|
goto do_reset;
|
|
}
|
|
|
|
return 0;
|
|
|
|
do_reset:
|
|
gp->reset_task_pending = 1;
|
|
schedule_work(&gp->reset_task);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static __inline__ void gem_tx(struct net_device *dev, struct gem *gp, u32 gem_status)
|
|
{
|
|
int entry, limit;
|
|
|
|
if (netif_msg_intr(gp))
|
|
printk(KERN_DEBUG "%s: tx interrupt, gem_status: 0x%x\n",
|
|
gp->dev->name, gem_status);
|
|
|
|
entry = gp->tx_old;
|
|
limit = ((gem_status & GREG_STAT_TXNR) >> GREG_STAT_TXNR_SHIFT);
|
|
while (entry != limit) {
|
|
struct sk_buff *skb;
|
|
struct gem_txd *txd;
|
|
dma_addr_t dma_addr;
|
|
u32 dma_len;
|
|
int frag;
|
|
|
|
if (netif_msg_tx_done(gp))
|
|
printk(KERN_DEBUG "%s: tx done, slot %d\n",
|
|
gp->dev->name, entry);
|
|
skb = gp->tx_skbs[entry];
|
|
if (skb_shinfo(skb)->nr_frags) {
|
|
int last = entry + skb_shinfo(skb)->nr_frags;
|
|
int walk = entry;
|
|
int incomplete = 0;
|
|
|
|
last &= (TX_RING_SIZE - 1);
|
|
for (;;) {
|
|
walk = NEXT_TX(walk);
|
|
if (walk == limit)
|
|
incomplete = 1;
|
|
if (walk == last)
|
|
break;
|
|
}
|
|
if (incomplete)
|
|
break;
|
|
}
|
|
gp->tx_skbs[entry] = NULL;
|
|
gp->net_stats.tx_bytes += skb->len;
|
|
|
|
for (frag = 0; frag <= skb_shinfo(skb)->nr_frags; frag++) {
|
|
txd = &gp->init_block->txd[entry];
|
|
|
|
dma_addr = le64_to_cpu(txd->buffer);
|
|
dma_len = le64_to_cpu(txd->control_word) & TXDCTRL_BUFSZ;
|
|
|
|
pci_unmap_page(gp->pdev, dma_addr, dma_len, PCI_DMA_TODEVICE);
|
|
entry = NEXT_TX(entry);
|
|
}
|
|
|
|
gp->net_stats.tx_packets++;
|
|
dev_kfree_skb_irq(skb);
|
|
}
|
|
gp->tx_old = entry;
|
|
|
|
if (netif_queue_stopped(dev) &&
|
|
TX_BUFFS_AVAIL(gp) > (MAX_SKB_FRAGS + 1))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static __inline__ void gem_post_rxds(struct gem *gp, int limit)
|
|
{
|
|
int cluster_start, curr, count, kick;
|
|
|
|
cluster_start = curr = (gp->rx_new & ~(4 - 1));
|
|
count = 0;
|
|
kick = -1;
|
|
wmb();
|
|
while (curr != limit) {
|
|
curr = NEXT_RX(curr);
|
|
if (++count == 4) {
|
|
struct gem_rxd *rxd =
|
|
&gp->init_block->rxd[cluster_start];
|
|
for (;;) {
|
|
rxd->status_word = cpu_to_le64(RXDCTRL_FRESH(gp));
|
|
rxd++;
|
|
cluster_start = NEXT_RX(cluster_start);
|
|
if (cluster_start == curr)
|
|
break;
|
|
}
|
|
kick = curr;
|
|
count = 0;
|
|
}
|
|
}
|
|
if (kick >= 0) {
|
|
mb();
|
|
writel(kick, gp->regs + RXDMA_KICK);
|
|
}
|
|
}
|
|
|
|
static int gem_rx(struct gem *gp, int work_to_do)
|
|
{
|
|
int entry, drops, work_done = 0;
|
|
u32 done;
|
|
__sum16 csum;
|
|
|
|
if (netif_msg_rx_status(gp))
|
|
printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n",
|
|
gp->dev->name, readl(gp->regs + RXDMA_DONE), gp->rx_new);
|
|
|
|
entry = gp->rx_new;
|
|
drops = 0;
|
|
done = readl(gp->regs + RXDMA_DONE);
|
|
for (;;) {
|
|
struct gem_rxd *rxd = &gp->init_block->rxd[entry];
|
|
struct sk_buff *skb;
|
|
u64 status = le64_to_cpu(rxd->status_word);
|
|
dma_addr_t dma_addr;
|
|
int len;
|
|
|
|
if ((status & RXDCTRL_OWN) != 0)
|
|
break;
|
|
|
|
if (work_done >= RX_RING_SIZE || work_done >= work_to_do)
|
|
break;
|
|
|
|
/* When writing back RX descriptor, GEM writes status
|
|
* then buffer address, possibly in seperate transactions.
|
|
* If we don't wait for the chip to write both, we could
|
|
* post a new buffer to this descriptor then have GEM spam
|
|
* on the buffer address. We sync on the RX completion
|
|
* register to prevent this from happening.
|
|
*/
|
|
if (entry == done) {
|
|
done = readl(gp->regs + RXDMA_DONE);
|
|
if (entry == done)
|
|
break;
|
|
}
|
|
|
|
/* We can now account for the work we're about to do */
|
|
work_done++;
|
|
|
|
skb = gp->rx_skbs[entry];
|
|
|
|
len = (status & RXDCTRL_BUFSZ) >> 16;
|
|
if ((len < ETH_ZLEN) || (status & RXDCTRL_BAD)) {
|
|
gp->net_stats.rx_errors++;
|
|
if (len < ETH_ZLEN)
|
|
gp->net_stats.rx_length_errors++;
|
|
if (len & RXDCTRL_BAD)
|
|
gp->net_stats.rx_crc_errors++;
|
|
|
|
/* We'll just return it to GEM. */
|
|
drop_it:
|
|
gp->net_stats.rx_dropped++;
|
|
goto next;
|
|
}
|
|
|
|
dma_addr = le64_to_cpu(rxd->buffer);
|
|
if (len > RX_COPY_THRESHOLD) {
|
|
struct sk_buff *new_skb;
|
|
|
|
new_skb = gem_alloc_skb(RX_BUF_ALLOC_SIZE(gp), GFP_ATOMIC);
|
|
if (new_skb == NULL) {
|
|
drops++;
|
|
goto drop_it;
|
|
}
|
|
pci_unmap_page(gp->pdev, dma_addr,
|
|
RX_BUF_ALLOC_SIZE(gp),
|
|
PCI_DMA_FROMDEVICE);
|
|
gp->rx_skbs[entry] = new_skb;
|
|
new_skb->dev = gp->dev;
|
|
skb_put(new_skb, (gp->rx_buf_sz + RX_OFFSET));
|
|
rxd->buffer = cpu_to_le64(pci_map_page(gp->pdev,
|
|
virt_to_page(new_skb->data),
|
|
offset_in_page(new_skb->data),
|
|
RX_BUF_ALLOC_SIZE(gp),
|
|
PCI_DMA_FROMDEVICE));
|
|
skb_reserve(new_skb, RX_OFFSET);
|
|
|
|
/* Trim the original skb for the netif. */
|
|
skb_trim(skb, len);
|
|
} else {
|
|
struct sk_buff *copy_skb = dev_alloc_skb(len + 2);
|
|
|
|
if (copy_skb == NULL) {
|
|
drops++;
|
|
goto drop_it;
|
|
}
|
|
|
|
skb_reserve(copy_skb, 2);
|
|
skb_put(copy_skb, len);
|
|
pci_dma_sync_single_for_cpu(gp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
|
|
skb_copy_from_linear_data(skb, copy_skb->data, len);
|
|
pci_dma_sync_single_for_device(gp->pdev, dma_addr, len, PCI_DMA_FROMDEVICE);
|
|
|
|
/* We'll reuse the original ring buffer. */
|
|
skb = copy_skb;
|
|
}
|
|
|
|
csum = (__force __sum16)htons((status & RXDCTRL_TCPCSUM) ^ 0xffff);
|
|
skb->csum = csum_unfold(csum);
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
skb->protocol = eth_type_trans(skb, gp->dev);
|
|
|
|
netif_receive_skb(skb);
|
|
|
|
gp->net_stats.rx_packets++;
|
|
gp->net_stats.rx_bytes += len;
|
|
|
|
next:
|
|
entry = NEXT_RX(entry);
|
|
}
|
|
|
|
gem_post_rxds(gp, entry);
|
|
|
|
gp->rx_new = entry;
|
|
|
|
if (drops)
|
|
printk(KERN_INFO "%s: Memory squeeze, deferring packet.\n",
|
|
gp->dev->name);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int gem_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct gem *gp = container_of(napi, struct gem, napi);
|
|
struct net_device *dev = gp->dev;
|
|
unsigned long flags;
|
|
int work_done;
|
|
|
|
/*
|
|
* NAPI locking nightmare: See comment at head of driver
|
|
*/
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
|
|
work_done = 0;
|
|
do {
|
|
/* Handle anomalies */
|
|
if (gp->status & GREG_STAT_ABNORMAL) {
|
|
if (gem_abnormal_irq(dev, gp, gp->status))
|
|
break;
|
|
}
|
|
|
|
/* Run TX completion thread */
|
|
spin_lock(&gp->tx_lock);
|
|
gem_tx(dev, gp, gp->status);
|
|
spin_unlock(&gp->tx_lock);
|
|
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
/* Run RX thread. We don't use any locking here,
|
|
* code willing to do bad things - like cleaning the
|
|
* rx ring - must call napi_disable(), which
|
|
* schedule_timeout()'s if polling is already disabled.
|
|
*/
|
|
work_done += gem_rx(gp, budget - work_done);
|
|
|
|
if (work_done >= budget)
|
|
return work_done;
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
|
|
gp->status = readl(gp->regs + GREG_STAT);
|
|
} while (gp->status & GREG_STAT_NAPI);
|
|
|
|
__napi_complete(napi);
|
|
gem_enable_ints(gp);
|
|
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static irqreturn_t gem_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
/* Swallow interrupts when shutting the chip down, though
|
|
* that shouldn't happen, we should have done free_irq() at
|
|
* this point...
|
|
*/
|
|
if (!gp->running)
|
|
return IRQ_HANDLED;
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
|
|
if (napi_schedule_prep(&gp->napi)) {
|
|
u32 gem_status = readl(gp->regs + GREG_STAT);
|
|
|
|
if (gem_status == 0) {
|
|
napi_enable(&gp->napi);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
return IRQ_NONE;
|
|
}
|
|
gp->status = gem_status;
|
|
gem_disable_ints(gp);
|
|
__napi_schedule(&gp->napi);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
/* If polling was disabled at the time we received that
|
|
* interrupt, we may return IRQ_HANDLED here while we
|
|
* should return IRQ_NONE. No big deal...
|
|
*/
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void gem_poll_controller(struct net_device *dev)
|
|
{
|
|
/* gem_interrupt is safe to reentrance so no need
|
|
* to disable_irq here.
|
|
*/
|
|
gem_interrupt(dev->irq, dev);
|
|
}
|
|
#endif
|
|
|
|
static void gem_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
|
|
if (!gp->running) {
|
|
printk("%s: hrm.. hw not running !\n", dev->name);
|
|
return;
|
|
}
|
|
printk(KERN_ERR "%s: TX_STATE[%08x:%08x:%08x]\n",
|
|
dev->name,
|
|
readl(gp->regs + TXDMA_CFG),
|
|
readl(gp->regs + MAC_TXSTAT),
|
|
readl(gp->regs + MAC_TXCFG));
|
|
printk(KERN_ERR "%s: RX_STATE[%08x:%08x:%08x]\n",
|
|
dev->name,
|
|
readl(gp->regs + RXDMA_CFG),
|
|
readl(gp->regs + MAC_RXSTAT),
|
|
readl(gp->regs + MAC_RXCFG));
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
gp->reset_task_pending = 1;
|
|
schedule_work(&gp->reset_task);
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
}
|
|
|
|
static __inline__ int gem_intme(int entry)
|
|
{
|
|
/* Algorithm: IRQ every 1/2 of descriptors. */
|
|
if (!(entry & ((TX_RING_SIZE>>1)-1)))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
int entry;
|
|
u64 ctrl;
|
|
unsigned long flags;
|
|
|
|
ctrl = 0;
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
const u64 csum_start_off = skb_transport_offset(skb);
|
|
const u64 csum_stuff_off = csum_start_off + skb->csum_offset;
|
|
|
|
ctrl = (TXDCTRL_CENAB |
|
|
(csum_start_off << 15) |
|
|
(csum_stuff_off << 21));
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
if (!spin_trylock(&gp->tx_lock)) {
|
|
/* Tell upper layer to requeue */
|
|
local_irq_restore(flags);
|
|
return NETDEV_TX_LOCKED;
|
|
}
|
|
/* We raced with gem_do_stop() */
|
|
if (!gp->running) {
|
|
spin_unlock_irqrestore(&gp->tx_lock, flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* This is a hard error, log it. */
|
|
if (TX_BUFFS_AVAIL(gp) <= (skb_shinfo(skb)->nr_frags + 1)) {
|
|
netif_stop_queue(dev);
|
|
spin_unlock_irqrestore(&gp->tx_lock, flags);
|
|
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
|
|
dev->name);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
entry = gp->tx_new;
|
|
gp->tx_skbs[entry] = skb;
|
|
|
|
if (skb_shinfo(skb)->nr_frags == 0) {
|
|
struct gem_txd *txd = &gp->init_block->txd[entry];
|
|
dma_addr_t mapping;
|
|
u32 len;
|
|
|
|
len = skb->len;
|
|
mapping = pci_map_page(gp->pdev,
|
|
virt_to_page(skb->data),
|
|
offset_in_page(skb->data),
|
|
len, PCI_DMA_TODEVICE);
|
|
ctrl |= TXDCTRL_SOF | TXDCTRL_EOF | len;
|
|
if (gem_intme(entry))
|
|
ctrl |= TXDCTRL_INTME;
|
|
txd->buffer = cpu_to_le64(mapping);
|
|
wmb();
|
|
txd->control_word = cpu_to_le64(ctrl);
|
|
entry = NEXT_TX(entry);
|
|
} else {
|
|
struct gem_txd *txd;
|
|
u32 first_len;
|
|
u64 intme;
|
|
dma_addr_t first_mapping;
|
|
int frag, first_entry = entry;
|
|
|
|
intme = 0;
|
|
if (gem_intme(entry))
|
|
intme |= TXDCTRL_INTME;
|
|
|
|
/* We must give this initial chunk to the device last.
|
|
* Otherwise we could race with the device.
|
|
*/
|
|
first_len = skb_headlen(skb);
|
|
first_mapping = pci_map_page(gp->pdev, virt_to_page(skb->data),
|
|
offset_in_page(skb->data),
|
|
first_len, PCI_DMA_TODEVICE);
|
|
entry = NEXT_TX(entry);
|
|
|
|
for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
|
|
skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
|
|
u32 len;
|
|
dma_addr_t mapping;
|
|
u64 this_ctrl;
|
|
|
|
len = this_frag->size;
|
|
mapping = pci_map_page(gp->pdev,
|
|
this_frag->page,
|
|
this_frag->page_offset,
|
|
len, PCI_DMA_TODEVICE);
|
|
this_ctrl = ctrl;
|
|
if (frag == skb_shinfo(skb)->nr_frags - 1)
|
|
this_ctrl |= TXDCTRL_EOF;
|
|
|
|
txd = &gp->init_block->txd[entry];
|
|
txd->buffer = cpu_to_le64(mapping);
|
|
wmb();
|
|
txd->control_word = cpu_to_le64(this_ctrl | len);
|
|
|
|
if (gem_intme(entry))
|
|
intme |= TXDCTRL_INTME;
|
|
|
|
entry = NEXT_TX(entry);
|
|
}
|
|
txd = &gp->init_block->txd[first_entry];
|
|
txd->buffer = cpu_to_le64(first_mapping);
|
|
wmb();
|
|
txd->control_word =
|
|
cpu_to_le64(ctrl | TXDCTRL_SOF | intme | first_len);
|
|
}
|
|
|
|
gp->tx_new = entry;
|
|
if (TX_BUFFS_AVAIL(gp) <= (MAX_SKB_FRAGS + 1))
|
|
netif_stop_queue(dev);
|
|
|
|
if (netif_msg_tx_queued(gp))
|
|
printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
|
|
dev->name, entry, skb->len);
|
|
mb();
|
|
writel(gp->tx_new, gp->regs + TXDMA_KICK);
|
|
spin_unlock_irqrestore(&gp->tx_lock, flags);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void gem_pcs_reset(struct gem *gp)
|
|
{
|
|
int limit;
|
|
u32 val;
|
|
|
|
/* Reset PCS unit. */
|
|
val = readl(gp->regs + PCS_MIICTRL);
|
|
val |= PCS_MIICTRL_RST;
|
|
writel(val, gp->regs + PCS_MIICTRL);
|
|
|
|
limit = 32;
|
|
while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
|
|
udelay(100);
|
|
if (limit-- <= 0)
|
|
break;
|
|
}
|
|
if (limit <= 0)
|
|
printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
|
|
gp->dev->name);
|
|
}
|
|
|
|
static void gem_pcs_reinit_adv(struct gem *gp)
|
|
{
|
|
u32 val;
|
|
|
|
/* Make sure PCS is disabled while changing advertisement
|
|
* configuration.
|
|
*/
|
|
val = readl(gp->regs + PCS_CFG);
|
|
val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
|
|
writel(val, gp->regs + PCS_CFG);
|
|
|
|
/* Advertise all capabilities except assymetric
|
|
* pause.
|
|
*/
|
|
val = readl(gp->regs + PCS_MIIADV);
|
|
val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
|
|
PCS_MIIADV_SP | PCS_MIIADV_AP);
|
|
writel(val, gp->regs + PCS_MIIADV);
|
|
|
|
/* Enable and restart auto-negotiation, disable wrapback/loopback,
|
|
* and re-enable PCS.
|
|
*/
|
|
val = readl(gp->regs + PCS_MIICTRL);
|
|
val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
|
|
val &= ~PCS_MIICTRL_WB;
|
|
writel(val, gp->regs + PCS_MIICTRL);
|
|
|
|
val = readl(gp->regs + PCS_CFG);
|
|
val |= PCS_CFG_ENABLE;
|
|
writel(val, gp->regs + PCS_CFG);
|
|
|
|
/* Make sure serialink loopback is off. The meaning
|
|
* of this bit is logically inverted based upon whether
|
|
* you are in Serialink or SERDES mode.
|
|
*/
|
|
val = readl(gp->regs + PCS_SCTRL);
|
|
if (gp->phy_type == phy_serialink)
|
|
val &= ~PCS_SCTRL_LOOP;
|
|
else
|
|
val |= PCS_SCTRL_LOOP;
|
|
writel(val, gp->regs + PCS_SCTRL);
|
|
}
|
|
|
|
#define STOP_TRIES 32
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_reset(struct gem *gp)
|
|
{
|
|
int limit;
|
|
u32 val;
|
|
|
|
/* Make sure we won't get any more interrupts */
|
|
writel(0xffffffff, gp->regs + GREG_IMASK);
|
|
|
|
/* Reset the chip */
|
|
writel(gp->swrst_base | GREG_SWRST_TXRST | GREG_SWRST_RXRST,
|
|
gp->regs + GREG_SWRST);
|
|
|
|
limit = STOP_TRIES;
|
|
|
|
do {
|
|
udelay(20);
|
|
val = readl(gp->regs + GREG_SWRST);
|
|
if (limit-- <= 0)
|
|
break;
|
|
} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
|
|
|
|
if (limit <= 0)
|
|
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
|
|
|
|
if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
|
|
gem_pcs_reinit_adv(gp);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_start_dma(struct gem *gp)
|
|
{
|
|
u32 val;
|
|
|
|
/* We are ready to rock, turn everything on. */
|
|
val = readl(gp->regs + TXDMA_CFG);
|
|
writel(val | TXDMA_CFG_ENABLE, gp->regs + TXDMA_CFG);
|
|
val = readl(gp->regs + RXDMA_CFG);
|
|
writel(val | RXDMA_CFG_ENABLE, gp->regs + RXDMA_CFG);
|
|
val = readl(gp->regs + MAC_TXCFG);
|
|
writel(val | MAC_TXCFG_ENAB, gp->regs + MAC_TXCFG);
|
|
val = readl(gp->regs + MAC_RXCFG);
|
|
writel(val | MAC_RXCFG_ENAB, gp->regs + MAC_RXCFG);
|
|
|
|
(void) readl(gp->regs + MAC_RXCFG);
|
|
udelay(100);
|
|
|
|
gem_enable_ints(gp);
|
|
|
|
writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. DMA won't be
|
|
* actually stopped before about 4ms tho ...
|
|
*/
|
|
static void gem_stop_dma(struct gem *gp)
|
|
{
|
|
u32 val;
|
|
|
|
/* We are done rocking, turn everything off. */
|
|
val = readl(gp->regs + TXDMA_CFG);
|
|
writel(val & ~TXDMA_CFG_ENABLE, gp->regs + TXDMA_CFG);
|
|
val = readl(gp->regs + RXDMA_CFG);
|
|
writel(val & ~RXDMA_CFG_ENABLE, gp->regs + RXDMA_CFG);
|
|
val = readl(gp->regs + MAC_TXCFG);
|
|
writel(val & ~MAC_TXCFG_ENAB, gp->regs + MAC_TXCFG);
|
|
val = readl(gp->regs + MAC_RXCFG);
|
|
writel(val & ~MAC_RXCFG_ENAB, gp->regs + MAC_RXCFG);
|
|
|
|
(void) readl(gp->regs + MAC_RXCFG);
|
|
|
|
/* Need to wait a bit ... done by the caller */
|
|
}
|
|
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
// XXX dbl check what that function should do when called on PCS PHY
|
|
static void gem_begin_auto_negotiation(struct gem *gp, struct ethtool_cmd *ep)
|
|
{
|
|
u32 advertise, features;
|
|
int autoneg;
|
|
int speed;
|
|
int duplex;
|
|
|
|
if (gp->phy_type != phy_mii_mdio0 &&
|
|
gp->phy_type != phy_mii_mdio1)
|
|
goto non_mii;
|
|
|
|
/* Setup advertise */
|
|
if (found_mii_phy(gp))
|
|
features = gp->phy_mii.def->features;
|
|
else
|
|
features = 0;
|
|
|
|
advertise = features & ADVERTISE_MASK;
|
|
if (gp->phy_mii.advertising != 0)
|
|
advertise &= gp->phy_mii.advertising;
|
|
|
|
autoneg = gp->want_autoneg;
|
|
speed = gp->phy_mii.speed;
|
|
duplex = gp->phy_mii.duplex;
|
|
|
|
/* Setup link parameters */
|
|
if (!ep)
|
|
goto start_aneg;
|
|
if (ep->autoneg == AUTONEG_ENABLE) {
|
|
advertise = ep->advertising;
|
|
autoneg = 1;
|
|
} else {
|
|
autoneg = 0;
|
|
speed = ep->speed;
|
|
duplex = ep->duplex;
|
|
}
|
|
|
|
start_aneg:
|
|
/* Sanitize settings based on PHY capabilities */
|
|
if ((features & SUPPORTED_Autoneg) == 0)
|
|
autoneg = 0;
|
|
if (speed == SPEED_1000 &&
|
|
!(features & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)))
|
|
speed = SPEED_100;
|
|
if (speed == SPEED_100 &&
|
|
!(features & (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full)))
|
|
speed = SPEED_10;
|
|
if (duplex == DUPLEX_FULL &&
|
|
!(features & (SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_10baseT_Full)))
|
|
duplex = DUPLEX_HALF;
|
|
if (speed == 0)
|
|
speed = SPEED_10;
|
|
|
|
/* If we are asleep, we don't try to actually setup the PHY, we
|
|
* just store the settings
|
|
*/
|
|
if (gp->asleep) {
|
|
gp->phy_mii.autoneg = gp->want_autoneg = autoneg;
|
|
gp->phy_mii.speed = speed;
|
|
gp->phy_mii.duplex = duplex;
|
|
return;
|
|
}
|
|
|
|
/* Configure PHY & start aneg */
|
|
gp->want_autoneg = autoneg;
|
|
if (autoneg) {
|
|
if (found_mii_phy(gp))
|
|
gp->phy_mii.def->ops->setup_aneg(&gp->phy_mii, advertise);
|
|
gp->lstate = link_aneg;
|
|
} else {
|
|
if (found_mii_phy(gp))
|
|
gp->phy_mii.def->ops->setup_forced(&gp->phy_mii, speed, duplex);
|
|
gp->lstate = link_force_ok;
|
|
}
|
|
|
|
non_mii:
|
|
gp->timer_ticks = 0;
|
|
mod_timer(&gp->link_timer, jiffies + ((12 * HZ) / 10));
|
|
}
|
|
|
|
/* A link-up condition has occurred, initialize and enable the
|
|
* rest of the chip.
|
|
*
|
|
* Must be invoked under gp->lock and gp->tx_lock.
|
|
*/
|
|
static int gem_set_link_modes(struct gem *gp)
|
|
{
|
|
u32 val;
|
|
int full_duplex, speed, pause;
|
|
|
|
full_duplex = 0;
|
|
speed = SPEED_10;
|
|
pause = 0;
|
|
|
|
if (found_mii_phy(gp)) {
|
|
if (gp->phy_mii.def->ops->read_link(&gp->phy_mii))
|
|
return 1;
|
|
full_duplex = (gp->phy_mii.duplex == DUPLEX_FULL);
|
|
speed = gp->phy_mii.speed;
|
|
pause = gp->phy_mii.pause;
|
|
} else if (gp->phy_type == phy_serialink ||
|
|
gp->phy_type == phy_serdes) {
|
|
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
|
|
|
|
if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
|
|
full_duplex = 1;
|
|
speed = SPEED_1000;
|
|
}
|
|
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: Link is up at %d Mbps, %s-duplex.\n",
|
|
gp->dev->name, speed, (full_duplex ? "full" : "half"));
|
|
|
|
if (!gp->running)
|
|
return 0;
|
|
|
|
val = (MAC_TXCFG_EIPG0 | MAC_TXCFG_NGU);
|
|
if (full_duplex) {
|
|
val |= (MAC_TXCFG_ICS | MAC_TXCFG_ICOLL);
|
|
} else {
|
|
/* MAC_TXCFG_NBO must be zero. */
|
|
}
|
|
writel(val, gp->regs + MAC_TXCFG);
|
|
|
|
val = (MAC_XIFCFG_OE | MAC_XIFCFG_LLED);
|
|
if (!full_duplex &&
|
|
(gp->phy_type == phy_mii_mdio0 ||
|
|
gp->phy_type == phy_mii_mdio1)) {
|
|
val |= MAC_XIFCFG_DISE;
|
|
} else if (full_duplex) {
|
|
val |= MAC_XIFCFG_FLED;
|
|
}
|
|
|
|
if (speed == SPEED_1000)
|
|
val |= (MAC_XIFCFG_GMII);
|
|
|
|
writel(val, gp->regs + MAC_XIFCFG);
|
|
|
|
/* If gigabit and half-duplex, enable carrier extension
|
|
* mode. Else, disable it.
|
|
*/
|
|
if (speed == SPEED_1000 && !full_duplex) {
|
|
val = readl(gp->regs + MAC_TXCFG);
|
|
writel(val | MAC_TXCFG_TCE, gp->regs + MAC_TXCFG);
|
|
|
|
val = readl(gp->regs + MAC_RXCFG);
|
|
writel(val | MAC_RXCFG_RCE, gp->regs + MAC_RXCFG);
|
|
} else {
|
|
val = readl(gp->regs + MAC_TXCFG);
|
|
writel(val & ~MAC_TXCFG_TCE, gp->regs + MAC_TXCFG);
|
|
|
|
val = readl(gp->regs + MAC_RXCFG);
|
|
writel(val & ~MAC_RXCFG_RCE, gp->regs + MAC_RXCFG);
|
|
}
|
|
|
|
if (gp->phy_type == phy_serialink ||
|
|
gp->phy_type == phy_serdes) {
|
|
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
|
|
|
|
if (pcs_lpa & (PCS_MIIADV_SP | PCS_MIIADV_AP))
|
|
pause = 1;
|
|
}
|
|
|
|
if (netif_msg_link(gp)) {
|
|
if (pause) {
|
|
printk(KERN_INFO "%s: Pause is enabled "
|
|
"(rxfifo: %d off: %d on: %d)\n",
|
|
gp->dev->name,
|
|
gp->rx_fifo_sz,
|
|
gp->rx_pause_off,
|
|
gp->rx_pause_on);
|
|
} else {
|
|
printk(KERN_INFO "%s: Pause is disabled\n",
|
|
gp->dev->name);
|
|
}
|
|
}
|
|
|
|
if (!full_duplex)
|
|
writel(512, gp->regs + MAC_STIME);
|
|
else
|
|
writel(64, gp->regs + MAC_STIME);
|
|
val = readl(gp->regs + MAC_MCCFG);
|
|
if (pause)
|
|
val |= (MAC_MCCFG_SPE | MAC_MCCFG_RPE);
|
|
else
|
|
val &= ~(MAC_MCCFG_SPE | MAC_MCCFG_RPE);
|
|
writel(val, gp->regs + MAC_MCCFG);
|
|
|
|
gem_start_dma(gp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static int gem_mdio_link_not_up(struct gem *gp)
|
|
{
|
|
switch (gp->lstate) {
|
|
case link_force_ret:
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: Autoneg failed again, keeping"
|
|
" forced mode\n", gp->dev->name);
|
|
gp->phy_mii.def->ops->setup_forced(&gp->phy_mii,
|
|
gp->last_forced_speed, DUPLEX_HALF);
|
|
gp->timer_ticks = 5;
|
|
gp->lstate = link_force_ok;
|
|
return 0;
|
|
case link_aneg:
|
|
/* We try forced modes after a failed aneg only on PHYs that don't
|
|
* have "magic_aneg" bit set, which means they internally do the
|
|
* while forced-mode thingy. On these, we just restart aneg
|
|
*/
|
|
if (gp->phy_mii.def->magic_aneg)
|
|
return 1;
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: switching to forced 100bt\n",
|
|
gp->dev->name);
|
|
/* Try forced modes. */
|
|
gp->phy_mii.def->ops->setup_forced(&gp->phy_mii, SPEED_100,
|
|
DUPLEX_HALF);
|
|
gp->timer_ticks = 5;
|
|
gp->lstate = link_force_try;
|
|
return 0;
|
|
case link_force_try:
|
|
/* Downgrade from 100 to 10 Mbps if necessary.
|
|
* If already at 10Mbps, warn user about the
|
|
* situation every 10 ticks.
|
|
*/
|
|
if (gp->phy_mii.speed == SPEED_100) {
|
|
gp->phy_mii.def->ops->setup_forced(&gp->phy_mii, SPEED_10,
|
|
DUPLEX_HALF);
|
|
gp->timer_ticks = 5;
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: switching to forced 10bt\n",
|
|
gp->dev->name);
|
|
return 0;
|
|
} else
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void gem_link_timer(unsigned long data)
|
|
{
|
|
struct gem *gp = (struct gem *) data;
|
|
int restart_aneg = 0;
|
|
|
|
if (gp->asleep)
|
|
return;
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
gem_get_cell(gp);
|
|
|
|
/* If the reset task is still pending, we just
|
|
* reschedule the link timer
|
|
*/
|
|
if (gp->reset_task_pending)
|
|
goto restart;
|
|
|
|
if (gp->phy_type == phy_serialink ||
|
|
gp->phy_type == phy_serdes) {
|
|
u32 val = readl(gp->regs + PCS_MIISTAT);
|
|
|
|
if (!(val & PCS_MIISTAT_LS))
|
|
val = readl(gp->regs + PCS_MIISTAT);
|
|
|
|
if ((val & PCS_MIISTAT_LS) != 0) {
|
|
if (gp->lstate == link_up)
|
|
goto restart;
|
|
|
|
gp->lstate = link_up;
|
|
netif_carrier_on(gp->dev);
|
|
(void)gem_set_link_modes(gp);
|
|
}
|
|
goto restart;
|
|
}
|
|
if (found_mii_phy(gp) && gp->phy_mii.def->ops->poll_link(&gp->phy_mii)) {
|
|
/* Ok, here we got a link. If we had it due to a forced
|
|
* fallback, and we were configured for autoneg, we do
|
|
* retry a short autoneg pass. If you know your hub is
|
|
* broken, use ethtool ;)
|
|
*/
|
|
if (gp->lstate == link_force_try && gp->want_autoneg) {
|
|
gp->lstate = link_force_ret;
|
|
gp->last_forced_speed = gp->phy_mii.speed;
|
|
gp->timer_ticks = 5;
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: Got link after fallback, retrying"
|
|
" autoneg once...\n", gp->dev->name);
|
|
gp->phy_mii.def->ops->setup_aneg(&gp->phy_mii, gp->phy_mii.advertising);
|
|
} else if (gp->lstate != link_up) {
|
|
gp->lstate = link_up;
|
|
netif_carrier_on(gp->dev);
|
|
if (gem_set_link_modes(gp))
|
|
restart_aneg = 1;
|
|
}
|
|
} else {
|
|
/* If the link was previously up, we restart the
|
|
* whole process
|
|
*/
|
|
if (gp->lstate == link_up) {
|
|
gp->lstate = link_down;
|
|
if (netif_msg_link(gp))
|
|
printk(KERN_INFO "%s: Link down\n",
|
|
gp->dev->name);
|
|
netif_carrier_off(gp->dev);
|
|
gp->reset_task_pending = 1;
|
|
schedule_work(&gp->reset_task);
|
|
restart_aneg = 1;
|
|
} else if (++gp->timer_ticks > 10) {
|
|
if (found_mii_phy(gp))
|
|
restart_aneg = gem_mdio_link_not_up(gp);
|
|
else
|
|
restart_aneg = 1;
|
|
}
|
|
}
|
|
if (restart_aneg) {
|
|
gem_begin_auto_negotiation(gp, NULL);
|
|
goto out_unlock;
|
|
}
|
|
restart:
|
|
mod_timer(&gp->link_timer, jiffies + ((12 * HZ) / 10));
|
|
out_unlock:
|
|
gem_put_cell(gp);
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_clean_rings(struct gem *gp)
|
|
{
|
|
struct gem_init_block *gb = gp->init_block;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
dma_addr_t dma_addr;
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct gem_rxd *rxd;
|
|
|
|
rxd = &gb->rxd[i];
|
|
if (gp->rx_skbs[i] != NULL) {
|
|
skb = gp->rx_skbs[i];
|
|
dma_addr = le64_to_cpu(rxd->buffer);
|
|
pci_unmap_page(gp->pdev, dma_addr,
|
|
RX_BUF_ALLOC_SIZE(gp),
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
gp->rx_skbs[i] = NULL;
|
|
}
|
|
rxd->status_word = 0;
|
|
wmb();
|
|
rxd->buffer = 0;
|
|
}
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
if (gp->tx_skbs[i] != NULL) {
|
|
struct gem_txd *txd;
|
|
int frag;
|
|
|
|
skb = gp->tx_skbs[i];
|
|
gp->tx_skbs[i] = NULL;
|
|
|
|
for (frag = 0; frag <= skb_shinfo(skb)->nr_frags; frag++) {
|
|
int ent = i & (TX_RING_SIZE - 1);
|
|
|
|
txd = &gb->txd[ent];
|
|
dma_addr = le64_to_cpu(txd->buffer);
|
|
pci_unmap_page(gp->pdev, dma_addr,
|
|
le64_to_cpu(txd->control_word) &
|
|
TXDCTRL_BUFSZ, PCI_DMA_TODEVICE);
|
|
|
|
if (frag != skb_shinfo(skb)->nr_frags)
|
|
i++;
|
|
}
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_init_rings(struct gem *gp)
|
|
{
|
|
struct gem_init_block *gb = gp->init_block;
|
|
struct net_device *dev = gp->dev;
|
|
int i;
|
|
dma_addr_t dma_addr;
|
|
|
|
gp->rx_new = gp->rx_old = gp->tx_new = gp->tx_old = 0;
|
|
|
|
gem_clean_rings(gp);
|
|
|
|
gp->rx_buf_sz = max(dev->mtu + ETH_HLEN + VLAN_HLEN,
|
|
(unsigned)VLAN_ETH_FRAME_LEN);
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb;
|
|
struct gem_rxd *rxd = &gb->rxd[i];
|
|
|
|
skb = gem_alloc_skb(RX_BUF_ALLOC_SIZE(gp), GFP_ATOMIC);
|
|
if (!skb) {
|
|
rxd->buffer = 0;
|
|
rxd->status_word = 0;
|
|
continue;
|
|
}
|
|
|
|
gp->rx_skbs[i] = skb;
|
|
skb->dev = dev;
|
|
skb_put(skb, (gp->rx_buf_sz + RX_OFFSET));
|
|
dma_addr = pci_map_page(gp->pdev,
|
|
virt_to_page(skb->data),
|
|
offset_in_page(skb->data),
|
|
RX_BUF_ALLOC_SIZE(gp),
|
|
PCI_DMA_FROMDEVICE);
|
|
rxd->buffer = cpu_to_le64(dma_addr);
|
|
wmb();
|
|
rxd->status_word = cpu_to_le64(RXDCTRL_FRESH(gp));
|
|
skb_reserve(skb, RX_OFFSET);
|
|
}
|
|
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
struct gem_txd *txd = &gb->txd[i];
|
|
|
|
txd->control_word = 0;
|
|
wmb();
|
|
txd->buffer = 0;
|
|
}
|
|
wmb();
|
|
}
|
|
|
|
/* Init PHY interface and start link poll state machine */
|
|
static void gem_init_phy(struct gem *gp)
|
|
{
|
|
u32 mifcfg;
|
|
|
|
/* Revert MIF CFG setting done on stop_phy */
|
|
mifcfg = readl(gp->regs + MIF_CFG);
|
|
mifcfg &= ~MIF_CFG_BBMODE;
|
|
writel(mifcfg, gp->regs + MIF_CFG);
|
|
|
|
if (gp->pdev->vendor == PCI_VENDOR_ID_APPLE) {
|
|
int i;
|
|
|
|
/* Those delay sucks, the HW seem to love them though, I'll
|
|
* serisouly consider breaking some locks here to be able
|
|
* to schedule instead
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
#ifdef CONFIG_PPC_PMAC
|
|
pmac_call_feature(PMAC_FTR_GMAC_PHY_RESET, gp->of_node, 0, 0);
|
|
msleep(20);
|
|
#endif
|
|
/* Some PHYs used by apple have problem getting back to us,
|
|
* we do an additional reset here
|
|
*/
|
|
phy_write(gp, MII_BMCR, BMCR_RESET);
|
|
msleep(20);
|
|
if (phy_read(gp, MII_BMCR) != 0xffff)
|
|
break;
|
|
if (i == 2)
|
|
printk(KERN_WARNING "%s: GMAC PHY not responding !\n",
|
|
gp->dev->name);
|
|
}
|
|
}
|
|
|
|
if (gp->pdev->vendor == PCI_VENDOR_ID_SUN &&
|
|
gp->pdev->device == PCI_DEVICE_ID_SUN_GEM) {
|
|
u32 val;
|
|
|
|
/* Init datapath mode register. */
|
|
if (gp->phy_type == phy_mii_mdio0 ||
|
|
gp->phy_type == phy_mii_mdio1) {
|
|
val = PCS_DMODE_MGM;
|
|
} else if (gp->phy_type == phy_serialink) {
|
|
val = PCS_DMODE_SM | PCS_DMODE_GMOE;
|
|
} else {
|
|
val = PCS_DMODE_ESM;
|
|
}
|
|
|
|
writel(val, gp->regs + PCS_DMODE);
|
|
}
|
|
|
|
if (gp->phy_type == phy_mii_mdio0 ||
|
|
gp->phy_type == phy_mii_mdio1) {
|
|
// XXX check for errors
|
|
mii_phy_probe(&gp->phy_mii, gp->mii_phy_addr);
|
|
|
|
/* Init PHY */
|
|
if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
|
|
gp->phy_mii.def->ops->init(&gp->phy_mii);
|
|
} else {
|
|
gem_pcs_reset(gp);
|
|
gem_pcs_reinit_adv(gp);
|
|
}
|
|
|
|
/* Default aneg parameters */
|
|
gp->timer_ticks = 0;
|
|
gp->lstate = link_down;
|
|
netif_carrier_off(gp->dev);
|
|
|
|
/* Can I advertise gigabit here ? I'd need BCM PHY docs... */
|
|
spin_lock_irq(&gp->lock);
|
|
gem_begin_auto_negotiation(gp, NULL);
|
|
spin_unlock_irq(&gp->lock);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_init_dma(struct gem *gp)
|
|
{
|
|
u64 desc_dma = (u64) gp->gblock_dvma;
|
|
u32 val;
|
|
|
|
val = (TXDMA_CFG_BASE | (0x7ff << 10) | TXDMA_CFG_PMODE);
|
|
writel(val, gp->regs + TXDMA_CFG);
|
|
|
|
writel(desc_dma >> 32, gp->regs + TXDMA_DBHI);
|
|
writel(desc_dma & 0xffffffff, gp->regs + TXDMA_DBLOW);
|
|
desc_dma += (INIT_BLOCK_TX_RING_SIZE * sizeof(struct gem_txd));
|
|
|
|
writel(0, gp->regs + TXDMA_KICK);
|
|
|
|
val = (RXDMA_CFG_BASE | (RX_OFFSET << 10) |
|
|
((14 / 2) << 13) | RXDMA_CFG_FTHRESH_128);
|
|
writel(val, gp->regs + RXDMA_CFG);
|
|
|
|
writel(desc_dma >> 32, gp->regs + RXDMA_DBHI);
|
|
writel(desc_dma & 0xffffffff, gp->regs + RXDMA_DBLOW);
|
|
|
|
writel(RX_RING_SIZE - 4, gp->regs + RXDMA_KICK);
|
|
|
|
val = (((gp->rx_pause_off / 64) << 0) & RXDMA_PTHRESH_OFF);
|
|
val |= (((gp->rx_pause_on / 64) << 12) & RXDMA_PTHRESH_ON);
|
|
writel(val, gp->regs + RXDMA_PTHRESH);
|
|
|
|
if (readl(gp->regs + GREG_BIFCFG) & GREG_BIFCFG_M66EN)
|
|
writel(((5 & RXDMA_BLANK_IPKTS) |
|
|
((8 << 12) & RXDMA_BLANK_ITIME)),
|
|
gp->regs + RXDMA_BLANK);
|
|
else
|
|
writel(((5 & RXDMA_BLANK_IPKTS) |
|
|
((4 << 12) & RXDMA_BLANK_ITIME)),
|
|
gp->regs + RXDMA_BLANK);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static u32 gem_setup_multicast(struct gem *gp)
|
|
{
|
|
u32 rxcfg = 0;
|
|
int i;
|
|
|
|
if ((gp->dev->flags & IFF_ALLMULTI) ||
|
|
(gp->dev->mc_count > 256)) {
|
|
for (i=0; i<16; i++)
|
|
writel(0xffff, gp->regs + MAC_HASH0 + (i << 2));
|
|
rxcfg |= MAC_RXCFG_HFE;
|
|
} else if (gp->dev->flags & IFF_PROMISC) {
|
|
rxcfg |= MAC_RXCFG_PROM;
|
|
} else {
|
|
u16 hash_table[16];
|
|
u32 crc;
|
|
struct dev_mc_list *dmi = gp->dev->mc_list;
|
|
int i;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
hash_table[i] = 0;
|
|
|
|
for (i = 0; i < gp->dev->mc_count; i++) {
|
|
char *addrs = dmi->dmi_addr;
|
|
|
|
dmi = dmi->next;
|
|
|
|
if (!(*addrs & 1))
|
|
continue;
|
|
|
|
crc = ether_crc_le(6, addrs);
|
|
crc >>= 24;
|
|
hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf));
|
|
}
|
|
for (i=0; i<16; i++)
|
|
writel(hash_table[i], gp->regs + MAC_HASH0 + (i << 2));
|
|
rxcfg |= MAC_RXCFG_HFE;
|
|
}
|
|
|
|
return rxcfg;
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_init_mac(struct gem *gp)
|
|
{
|
|
unsigned char *e = &gp->dev->dev_addr[0];
|
|
|
|
writel(0x1bf0, gp->regs + MAC_SNDPAUSE);
|
|
|
|
writel(0x00, gp->regs + MAC_IPG0);
|
|
writel(0x08, gp->regs + MAC_IPG1);
|
|
writel(0x04, gp->regs + MAC_IPG2);
|
|
writel(0x40, gp->regs + MAC_STIME);
|
|
writel(0x40, gp->regs + MAC_MINFSZ);
|
|
|
|
/* Ethernet payload + header + FCS + optional VLAN tag. */
|
|
writel(0x20000000 | (gp->rx_buf_sz + 4), gp->regs + MAC_MAXFSZ);
|
|
|
|
writel(0x07, gp->regs + MAC_PASIZE);
|
|
writel(0x04, gp->regs + MAC_JAMSIZE);
|
|
writel(0x10, gp->regs + MAC_ATTLIM);
|
|
writel(0x8808, gp->regs + MAC_MCTYPE);
|
|
|
|
writel((e[5] | (e[4] << 8)) & 0x3ff, gp->regs + MAC_RANDSEED);
|
|
|
|
writel((e[4] << 8) | e[5], gp->regs + MAC_ADDR0);
|
|
writel((e[2] << 8) | e[3], gp->regs + MAC_ADDR1);
|
|
writel((e[0] << 8) | e[1], gp->regs + MAC_ADDR2);
|
|
|
|
writel(0, gp->regs + MAC_ADDR3);
|
|
writel(0, gp->regs + MAC_ADDR4);
|
|
writel(0, gp->regs + MAC_ADDR5);
|
|
|
|
writel(0x0001, gp->regs + MAC_ADDR6);
|
|
writel(0xc200, gp->regs + MAC_ADDR7);
|
|
writel(0x0180, gp->regs + MAC_ADDR8);
|
|
|
|
writel(0, gp->regs + MAC_AFILT0);
|
|
writel(0, gp->regs + MAC_AFILT1);
|
|
writel(0, gp->regs + MAC_AFILT2);
|
|
writel(0, gp->regs + MAC_AF21MSK);
|
|
writel(0, gp->regs + MAC_AF0MSK);
|
|
|
|
gp->mac_rx_cfg = gem_setup_multicast(gp);
|
|
#ifdef STRIP_FCS
|
|
gp->mac_rx_cfg |= MAC_RXCFG_SFCS;
|
|
#endif
|
|
writel(0, gp->regs + MAC_NCOLL);
|
|
writel(0, gp->regs + MAC_FASUCC);
|
|
writel(0, gp->regs + MAC_ECOLL);
|
|
writel(0, gp->regs + MAC_LCOLL);
|
|
writel(0, gp->regs + MAC_DTIMER);
|
|
writel(0, gp->regs + MAC_PATMPS);
|
|
writel(0, gp->regs + MAC_RFCTR);
|
|
writel(0, gp->regs + MAC_LERR);
|
|
writel(0, gp->regs + MAC_AERR);
|
|
writel(0, gp->regs + MAC_FCSERR);
|
|
writel(0, gp->regs + MAC_RXCVERR);
|
|
|
|
/* Clear RX/TX/MAC/XIF config, we will set these up and enable
|
|
* them once a link is established.
|
|
*/
|
|
writel(0, gp->regs + MAC_TXCFG);
|
|
writel(gp->mac_rx_cfg, gp->regs + MAC_RXCFG);
|
|
writel(0, gp->regs + MAC_MCCFG);
|
|
writel(0, gp->regs + MAC_XIFCFG);
|
|
|
|
/* Setup MAC interrupts. We want to get all of the interesting
|
|
* counter expiration events, but we do not want to hear about
|
|
* normal rx/tx as the DMA engine tells us that.
|
|
*/
|
|
writel(MAC_TXSTAT_XMIT, gp->regs + MAC_TXMASK);
|
|
writel(MAC_RXSTAT_RCV, gp->regs + MAC_RXMASK);
|
|
|
|
/* Don't enable even the PAUSE interrupts for now, we
|
|
* make no use of those events other than to record them.
|
|
*/
|
|
writel(0xffffffff, gp->regs + MAC_MCMASK);
|
|
|
|
/* Don't enable GEM's WOL in normal operations
|
|
*/
|
|
if (gp->has_wol)
|
|
writel(0, gp->regs + WOL_WAKECSR);
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_init_pause_thresholds(struct gem *gp)
|
|
{
|
|
u32 cfg;
|
|
|
|
/* Calculate pause thresholds. Setting the OFF threshold to the
|
|
* full RX fifo size effectively disables PAUSE generation which
|
|
* is what we do for 10/100 only GEMs which have FIFOs too small
|
|
* to make real gains from PAUSE.
|
|
*/
|
|
if (gp->rx_fifo_sz <= (2 * 1024)) {
|
|
gp->rx_pause_off = gp->rx_pause_on = gp->rx_fifo_sz;
|
|
} else {
|
|
int max_frame = (gp->rx_buf_sz + 4 + 64) & ~63;
|
|
int off = (gp->rx_fifo_sz - (max_frame * 2));
|
|
int on = off - max_frame;
|
|
|
|
gp->rx_pause_off = off;
|
|
gp->rx_pause_on = on;
|
|
}
|
|
|
|
|
|
/* Configure the chip "burst" DMA mode & enable some
|
|
* HW bug fixes on Apple version
|
|
*/
|
|
cfg = 0;
|
|
if (gp->pdev->vendor == PCI_VENDOR_ID_APPLE)
|
|
cfg |= GREG_CFG_RONPAULBIT | GREG_CFG_ENBUG2FIX;
|
|
#if !defined(CONFIG_SPARC64) && !defined(CONFIG_ALPHA)
|
|
cfg |= GREG_CFG_IBURST;
|
|
#endif
|
|
cfg |= ((31 << 1) & GREG_CFG_TXDMALIM);
|
|
cfg |= ((31 << 6) & GREG_CFG_RXDMALIM);
|
|
writel(cfg, gp->regs + GREG_CFG);
|
|
|
|
/* If Infinite Burst didn't stick, then use different
|
|
* thresholds (and Apple bug fixes don't exist)
|
|
*/
|
|
if (!(readl(gp->regs + GREG_CFG) & GREG_CFG_IBURST)) {
|
|
cfg = ((2 << 1) & GREG_CFG_TXDMALIM);
|
|
cfg |= ((8 << 6) & GREG_CFG_RXDMALIM);
|
|
writel(cfg, gp->regs + GREG_CFG);
|
|
}
|
|
}
|
|
|
|
static int gem_check_invariants(struct gem *gp)
|
|
{
|
|
struct pci_dev *pdev = gp->pdev;
|
|
u32 mif_cfg;
|
|
|
|
/* On Apple's sungem, we can't rely on registers as the chip
|
|
* was been powered down by the firmware. The PHY is looked
|
|
* up later on.
|
|
*/
|
|
if (pdev->vendor == PCI_VENDOR_ID_APPLE) {
|
|
gp->phy_type = phy_mii_mdio0;
|
|
gp->tx_fifo_sz = readl(gp->regs + TXDMA_FSZ) * 64;
|
|
gp->rx_fifo_sz = readl(gp->regs + RXDMA_FSZ) * 64;
|
|
gp->swrst_base = 0;
|
|
|
|
mif_cfg = readl(gp->regs + MIF_CFG);
|
|
mif_cfg &= ~(MIF_CFG_PSELECT|MIF_CFG_POLL|MIF_CFG_BBMODE|MIF_CFG_MDI1);
|
|
mif_cfg |= MIF_CFG_MDI0;
|
|
writel(mif_cfg, gp->regs + MIF_CFG);
|
|
writel(PCS_DMODE_MGM, gp->regs + PCS_DMODE);
|
|
writel(MAC_XIFCFG_OE, gp->regs + MAC_XIFCFG);
|
|
|
|
/* We hard-code the PHY address so we can properly bring it out of
|
|
* reset later on, we can't really probe it at this point, though
|
|
* that isn't an issue.
|
|
*/
|
|
if (gp->pdev->device == PCI_DEVICE_ID_APPLE_K2_GMAC)
|
|
gp->mii_phy_addr = 1;
|
|
else
|
|
gp->mii_phy_addr = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
mif_cfg = readl(gp->regs + MIF_CFG);
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_SUN &&
|
|
pdev->device == PCI_DEVICE_ID_SUN_RIO_GEM) {
|
|
/* One of the MII PHYs _must_ be present
|
|
* as this chip has no gigabit PHY.
|
|
*/
|
|
if ((mif_cfg & (MIF_CFG_MDI0 | MIF_CFG_MDI1)) == 0) {
|
|
printk(KERN_ERR PFX "RIO GEM lacks MII phy, mif_cfg[%08x]\n",
|
|
mif_cfg);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Determine initial PHY interface type guess. MDIO1 is the
|
|
* external PHY and thus takes precedence over MDIO0.
|
|
*/
|
|
|
|
if (mif_cfg & MIF_CFG_MDI1) {
|
|
gp->phy_type = phy_mii_mdio1;
|
|
mif_cfg |= MIF_CFG_PSELECT;
|
|
writel(mif_cfg, gp->regs + MIF_CFG);
|
|
} else if (mif_cfg & MIF_CFG_MDI0) {
|
|
gp->phy_type = phy_mii_mdio0;
|
|
mif_cfg &= ~MIF_CFG_PSELECT;
|
|
writel(mif_cfg, gp->regs + MIF_CFG);
|
|
} else {
|
|
gp->phy_type = phy_serialink;
|
|
}
|
|
if (gp->phy_type == phy_mii_mdio1 ||
|
|
gp->phy_type == phy_mii_mdio0) {
|
|
int i;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
gp->mii_phy_addr = i;
|
|
if (phy_read(gp, MII_BMCR) != 0xffff)
|
|
break;
|
|
}
|
|
if (i == 32) {
|
|
if (pdev->device != PCI_DEVICE_ID_SUN_GEM) {
|
|
printk(KERN_ERR PFX "RIO MII phy will not respond.\n");
|
|
return -1;
|
|
}
|
|
gp->phy_type = phy_serdes;
|
|
}
|
|
}
|
|
|
|
/* Fetch the FIFO configurations now too. */
|
|
gp->tx_fifo_sz = readl(gp->regs + TXDMA_FSZ) * 64;
|
|
gp->rx_fifo_sz = readl(gp->regs + RXDMA_FSZ) * 64;
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_SUN) {
|
|
if (pdev->device == PCI_DEVICE_ID_SUN_GEM) {
|
|
if (gp->tx_fifo_sz != (9 * 1024) ||
|
|
gp->rx_fifo_sz != (20 * 1024)) {
|
|
printk(KERN_ERR PFX "GEM has bogus fifo sizes tx(%d) rx(%d)\n",
|
|
gp->tx_fifo_sz, gp->rx_fifo_sz);
|
|
return -1;
|
|
}
|
|
gp->swrst_base = 0;
|
|
} else {
|
|
if (gp->tx_fifo_sz != (2 * 1024) ||
|
|
gp->rx_fifo_sz != (2 * 1024)) {
|
|
printk(KERN_ERR PFX "RIO GEM has bogus fifo sizes tx(%d) rx(%d)\n",
|
|
gp->tx_fifo_sz, gp->rx_fifo_sz);
|
|
return -1;
|
|
}
|
|
gp->swrst_base = (64 / 4) << GREG_SWRST_CACHE_SHIFT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Must be invoked under gp->lock and gp->tx_lock. */
|
|
static void gem_reinit_chip(struct gem *gp)
|
|
{
|
|
/* Reset the chip */
|
|
gem_reset(gp);
|
|
|
|
/* Make sure ints are disabled */
|
|
gem_disable_ints(gp);
|
|
|
|
/* Allocate & setup ring buffers */
|
|
gem_init_rings(gp);
|
|
|
|
/* Configure pause thresholds */
|
|
gem_init_pause_thresholds(gp);
|
|
|
|
/* Init DMA & MAC engines */
|
|
gem_init_dma(gp);
|
|
gem_init_mac(gp);
|
|
}
|
|
|
|
|
|
/* Must be invoked with no lock held. */
|
|
static void gem_stop_phy(struct gem *gp, int wol)
|
|
{
|
|
u32 mifcfg;
|
|
unsigned long flags;
|
|
|
|
/* Let the chip settle down a bit, it seems that helps
|
|
* for sleep mode on some models
|
|
*/
|
|
msleep(10);
|
|
|
|
/* Make sure we aren't polling PHY status change. We
|
|
* don't currently use that feature though
|
|
*/
|
|
mifcfg = readl(gp->regs + MIF_CFG);
|
|
mifcfg &= ~MIF_CFG_POLL;
|
|
writel(mifcfg, gp->regs + MIF_CFG);
|
|
|
|
if (wol && gp->has_wol) {
|
|
unsigned char *e = &gp->dev->dev_addr[0];
|
|
u32 csr;
|
|
|
|
/* Setup wake-on-lan for MAGIC packet */
|
|
writel(MAC_RXCFG_HFE | MAC_RXCFG_SFCS | MAC_RXCFG_ENAB,
|
|
gp->regs + MAC_RXCFG);
|
|
writel((e[4] << 8) | e[5], gp->regs + WOL_MATCH0);
|
|
writel((e[2] << 8) | e[3], gp->regs + WOL_MATCH1);
|
|
writel((e[0] << 8) | e[1], gp->regs + WOL_MATCH2);
|
|
|
|
writel(WOL_MCOUNT_N | WOL_MCOUNT_M, gp->regs + WOL_MCOUNT);
|
|
csr = WOL_WAKECSR_ENABLE;
|
|
if ((readl(gp->regs + MAC_XIFCFG) & MAC_XIFCFG_GMII) == 0)
|
|
csr |= WOL_WAKECSR_MII;
|
|
writel(csr, gp->regs + WOL_WAKECSR);
|
|
} else {
|
|
writel(0, gp->regs + MAC_RXCFG);
|
|
(void)readl(gp->regs + MAC_RXCFG);
|
|
/* Machine sleep will die in strange ways if we
|
|
* dont wait a bit here, looks like the chip takes
|
|
* some time to really shut down
|
|
*/
|
|
msleep(10);
|
|
}
|
|
|
|
writel(0, gp->regs + MAC_TXCFG);
|
|
writel(0, gp->regs + MAC_XIFCFG);
|
|
writel(0, gp->regs + TXDMA_CFG);
|
|
writel(0, gp->regs + RXDMA_CFG);
|
|
|
|
if (!wol) {
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
gem_reset(gp);
|
|
writel(MAC_TXRST_CMD, gp->regs + MAC_TXRST);
|
|
writel(MAC_RXRST_CMD, gp->regs + MAC_RXRST);
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
/* No need to take the lock here */
|
|
|
|
if (found_mii_phy(gp) && gp->phy_mii.def->ops->suspend)
|
|
gp->phy_mii.def->ops->suspend(&gp->phy_mii);
|
|
|
|
/* According to Apple, we must set the MDIO pins to this begnign
|
|
* state or we may 1) eat more current, 2) damage some PHYs
|
|
*/
|
|
writel(mifcfg | MIF_CFG_BBMODE, gp->regs + MIF_CFG);
|
|
writel(0, gp->regs + MIF_BBCLK);
|
|
writel(0, gp->regs + MIF_BBDATA);
|
|
writel(0, gp->regs + MIF_BBOENAB);
|
|
writel(MAC_XIFCFG_GMII | MAC_XIFCFG_LBCK, gp->regs + MAC_XIFCFG);
|
|
(void) readl(gp->regs + MAC_XIFCFG);
|
|
}
|
|
}
|
|
|
|
|
|
static int gem_do_start(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
/* Enable the cell */
|
|
gem_get_cell(gp);
|
|
|
|
/* Init & setup chip hardware */
|
|
gem_reinit_chip(gp);
|
|
|
|
gp->running = 1;
|
|
|
|
if (gp->lstate == link_up) {
|
|
netif_carrier_on(gp->dev);
|
|
gem_set_link_modes(gp);
|
|
}
|
|
|
|
netif_wake_queue(gp->dev);
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
if (request_irq(gp->pdev->irq, gem_interrupt,
|
|
IRQF_SHARED, dev->name, (void *)dev)) {
|
|
printk(KERN_ERR "%s: failed to request irq !\n", gp->dev->name);
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
gp->running = 0;
|
|
gem_reset(gp);
|
|
gem_clean_rings(gp);
|
|
gem_put_cell(gp);
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gem_do_stop(struct net_device *dev, int wol)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
gp->running = 0;
|
|
|
|
/* Stop netif queue */
|
|
netif_stop_queue(dev);
|
|
|
|
/* Make sure ints are disabled */
|
|
gem_disable_ints(gp);
|
|
|
|
/* We can drop the lock now */
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
/* If we are going to sleep with WOL */
|
|
gem_stop_dma(gp);
|
|
msleep(10);
|
|
if (!wol)
|
|
gem_reset(gp);
|
|
msleep(10);
|
|
|
|
/* Get rid of rings */
|
|
gem_clean_rings(gp);
|
|
|
|
/* No irq needed anymore */
|
|
free_irq(gp->pdev->irq, (void *) dev);
|
|
|
|
/* Cell not needed neither if no WOL */
|
|
if (!wol) {
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
gem_put_cell(gp);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
}
|
|
}
|
|
|
|
static void gem_reset_task(struct work_struct *work)
|
|
{
|
|
struct gem *gp = container_of(work, struct gem, reset_task);
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
if (gp->opened)
|
|
napi_disable(&gp->napi);
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
if (gp->running) {
|
|
netif_stop_queue(gp->dev);
|
|
|
|
/* Reset the chip & rings */
|
|
gem_reinit_chip(gp);
|
|
if (gp->lstate == link_up)
|
|
gem_set_link_modes(gp);
|
|
netif_wake_queue(gp->dev);
|
|
}
|
|
|
|
gp->reset_task_pending = 0;
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
|
|
if (gp->opened)
|
|
napi_enable(&gp->napi);
|
|
|
|
mutex_unlock(&gp->pm_mutex);
|
|
}
|
|
|
|
|
|
static int gem_open(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
int rc = 0;
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
/* We need the cell enabled */
|
|
if (!gp->asleep)
|
|
rc = gem_do_start(dev);
|
|
gp->opened = (rc == 0);
|
|
if (gp->opened)
|
|
napi_enable(&gp->napi);
|
|
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int gem_close(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
napi_disable(&gp->napi);
|
|
|
|
gp->opened = 0;
|
|
if (!gp->asleep)
|
|
gem_do_stop(dev, 0);
|
|
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int gem_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
printk(KERN_INFO "%s: suspending, WakeOnLan %s\n",
|
|
dev->name,
|
|
(gp->wake_on_lan && gp->opened) ? "enabled" : "disabled");
|
|
|
|
/* Keep the cell enabled during the entire operation */
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
gem_get_cell(gp);
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
/* If the driver is opened, we stop the MAC */
|
|
if (gp->opened) {
|
|
napi_disable(&gp->napi);
|
|
|
|
/* Stop traffic, mark us closed */
|
|
netif_device_detach(dev);
|
|
|
|
/* Switch off MAC, remember WOL setting */
|
|
gp->asleep_wol = gp->wake_on_lan;
|
|
gem_do_stop(dev, gp->asleep_wol);
|
|
} else
|
|
gp->asleep_wol = 0;
|
|
|
|
/* Mark us asleep */
|
|
gp->asleep = 1;
|
|
wmb();
|
|
|
|
/* Stop the link timer */
|
|
del_timer_sync(&gp->link_timer);
|
|
|
|
/* Now we release the mutex to not block the reset task who
|
|
* can take it too. We are marked asleep, so there will be no
|
|
* conflict here
|
|
*/
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
/* Wait for a pending reset task to complete */
|
|
while (gp->reset_task_pending)
|
|
yield();
|
|
flush_scheduled_work();
|
|
|
|
/* Shut the PHY down eventually and setup WOL */
|
|
gem_stop_phy(gp, gp->asleep_wol);
|
|
|
|
/* Make sure bus master is disabled */
|
|
pci_disable_device(gp->pdev);
|
|
|
|
/* Release the cell, no need to take a lock at this point since
|
|
* nothing else can happen now
|
|
*/
|
|
gem_put_cell(gp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
printk(KERN_INFO "%s: resuming\n", dev->name);
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
/* Keep the cell enabled during the entire operation, no need to
|
|
* take a lock here tho since nothing else can happen while we are
|
|
* marked asleep
|
|
*/
|
|
gem_get_cell(gp);
|
|
|
|
/* Make sure PCI access and bus master are enabled */
|
|
if (pci_enable_device(gp->pdev)) {
|
|
printk(KERN_ERR "%s: Can't re-enable chip !\n",
|
|
dev->name);
|
|
/* Put cell and forget it for now, it will be considered as
|
|
* still asleep, a new sleep cycle may bring it back
|
|
*/
|
|
gem_put_cell(gp);
|
|
mutex_unlock(&gp->pm_mutex);
|
|
return 0;
|
|
}
|
|
pci_set_master(gp->pdev);
|
|
|
|
/* Reset everything */
|
|
gem_reset(gp);
|
|
|
|
/* Mark us woken up */
|
|
gp->asleep = 0;
|
|
wmb();
|
|
|
|
/* Bring the PHY back. Again, lock is useless at this point as
|
|
* nothing can be happening until we restart the whole thing
|
|
*/
|
|
gem_init_phy(gp);
|
|
|
|
/* If we were opened, bring everything back */
|
|
if (gp->opened) {
|
|
/* Restart MAC */
|
|
gem_do_start(dev);
|
|
|
|
/* Re-attach net device */
|
|
netif_device_attach(dev);
|
|
|
|
napi_enable(&gp->napi);
|
|
}
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
/* If we had WOL enabled, the cell clock was never turned off during
|
|
* sleep, so we end up beeing unbalanced. Fix that here
|
|
*/
|
|
if (gp->asleep_wol)
|
|
gem_put_cell(gp);
|
|
|
|
/* This function doesn't need to hold the cell, it will be held if the
|
|
* driver is open by gem_do_start().
|
|
*/
|
|
gem_put_cell(gp);
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct net_device_stats *gem_get_stats(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
struct net_device_stats *stats = &gp->net_stats;
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
/* I have seen this being called while the PM was in progress,
|
|
* so we shield against this
|
|
*/
|
|
if (gp->running) {
|
|
stats->rx_crc_errors += readl(gp->regs + MAC_FCSERR);
|
|
writel(0, gp->regs + MAC_FCSERR);
|
|
|
|
stats->rx_frame_errors += readl(gp->regs + MAC_AERR);
|
|
writel(0, gp->regs + MAC_AERR);
|
|
|
|
stats->rx_length_errors += readl(gp->regs + MAC_LERR);
|
|
writel(0, gp->regs + MAC_LERR);
|
|
|
|
stats->tx_aborted_errors += readl(gp->regs + MAC_ECOLL);
|
|
stats->collisions +=
|
|
(readl(gp->regs + MAC_ECOLL) +
|
|
readl(gp->regs + MAC_LCOLL));
|
|
writel(0, gp->regs + MAC_ECOLL);
|
|
writel(0, gp->regs + MAC_LCOLL);
|
|
}
|
|
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
|
|
return &gp->net_stats;
|
|
}
|
|
|
|
static int gem_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *macaddr = (struct sockaddr *) addr;
|
|
struct gem *gp = netdev_priv(dev);
|
|
unsigned char *e = &dev->dev_addr[0];
|
|
|
|
if (!is_valid_ether_addr(macaddr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
if (!netif_running(dev) || !netif_device_present(dev)) {
|
|
/* We'll just catch it later when the
|
|
* device is up'd or resumed.
|
|
*/
|
|
memcpy(dev->dev_addr, macaddr->sa_data, dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
memcpy(dev->dev_addr, macaddr->sa_data, dev->addr_len);
|
|
if (gp->running) {
|
|
writel((e[4] << 8) | e[5], gp->regs + MAC_ADDR0);
|
|
writel((e[2] << 8) | e[3], gp->regs + MAC_ADDR1);
|
|
writel((e[0] << 8) | e[1], gp->regs + MAC_ADDR2);
|
|
}
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gem_set_multicast(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
u32 rxcfg, rxcfg_new;
|
|
int limit = 10000;
|
|
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
|
|
if (!gp->running)
|
|
goto bail;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
rxcfg = readl(gp->regs + MAC_RXCFG);
|
|
rxcfg_new = gem_setup_multicast(gp);
|
|
#ifdef STRIP_FCS
|
|
rxcfg_new |= MAC_RXCFG_SFCS;
|
|
#endif
|
|
gp->mac_rx_cfg = rxcfg_new;
|
|
|
|
writel(rxcfg & ~MAC_RXCFG_ENAB, gp->regs + MAC_RXCFG);
|
|
while (readl(gp->regs + MAC_RXCFG) & MAC_RXCFG_ENAB) {
|
|
if (!limit--)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
rxcfg &= ~(MAC_RXCFG_PROM | MAC_RXCFG_HFE);
|
|
rxcfg |= rxcfg_new;
|
|
|
|
writel(rxcfg, gp->regs + MAC_RXCFG);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
bail:
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
}
|
|
|
|
/* Jumbo-grams don't seem to work :-( */
|
|
#define GEM_MIN_MTU 68
|
|
#if 1
|
|
#define GEM_MAX_MTU 1500
|
|
#else
|
|
#define GEM_MAX_MTU 9000
|
|
#endif
|
|
|
|
static int gem_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
if (new_mtu < GEM_MIN_MTU || new_mtu > GEM_MAX_MTU)
|
|
return -EINVAL;
|
|
|
|
if (!netif_running(dev) || !netif_device_present(dev)) {
|
|
/* We'll just catch it later when the
|
|
* device is up'd or resumed.
|
|
*/
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&gp->pm_mutex);
|
|
spin_lock_irq(&gp->lock);
|
|
spin_lock(&gp->tx_lock);
|
|
dev->mtu = new_mtu;
|
|
if (gp->running) {
|
|
gem_reinit_chip(gp);
|
|
if (gp->lstate == link_up)
|
|
gem_set_link_modes(gp);
|
|
}
|
|
spin_unlock(&gp->tx_lock);
|
|
spin_unlock_irq(&gp->lock);
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gem_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->bus_info, pci_name(gp->pdev));
|
|
}
|
|
|
|
static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
if (gp->phy_type == phy_mii_mdio0 ||
|
|
gp->phy_type == phy_mii_mdio1) {
|
|
if (gp->phy_mii.def)
|
|
cmd->supported = gp->phy_mii.def->features;
|
|
else
|
|
cmd->supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full);
|
|
|
|
/* XXX hardcoded stuff for now */
|
|
cmd->port = PORT_MII;
|
|
cmd->transceiver = XCVR_EXTERNAL;
|
|
cmd->phy_address = 0; /* XXX fixed PHYAD */
|
|
|
|
/* Return current PHY settings */
|
|
spin_lock_irq(&gp->lock);
|
|
cmd->autoneg = gp->want_autoneg;
|
|
cmd->speed = gp->phy_mii.speed;
|
|
cmd->duplex = gp->phy_mii.duplex;
|
|
cmd->advertising = gp->phy_mii.advertising;
|
|
|
|
/* If we started with a forced mode, we don't have a default
|
|
* advertise set, we need to return something sensible so
|
|
* userland can re-enable autoneg properly.
|
|
*/
|
|
if (cmd->advertising == 0)
|
|
cmd->advertising = cmd->supported;
|
|
spin_unlock_irq(&gp->lock);
|
|
} else { // XXX PCS ?
|
|
cmd->supported =
|
|
(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
|
|
SUPPORTED_Autoneg);
|
|
cmd->advertising = cmd->supported;
|
|
cmd->speed = 0;
|
|
cmd->duplex = cmd->port = cmd->phy_address =
|
|
cmd->transceiver = cmd->autoneg = 0;
|
|
|
|
/* serdes means usually a Fibre connector, with most fixed */
|
|
if (gp->phy_type == phy_serdes) {
|
|
cmd->port = PORT_FIBRE;
|
|
cmd->supported = (SUPPORTED_1000baseT_Half |
|
|
SUPPORTED_1000baseT_Full |
|
|
SUPPORTED_FIBRE | SUPPORTED_Autoneg |
|
|
SUPPORTED_Pause | SUPPORTED_Asym_Pause);
|
|
cmd->advertising = cmd->supported;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
if (gp->lstate == link_up)
|
|
cmd->speed = SPEED_1000;
|
|
cmd->duplex = DUPLEX_FULL;
|
|
cmd->autoneg = 1;
|
|
}
|
|
}
|
|
cmd->maxtxpkt = cmd->maxrxpkt = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
/* Verify the settings we care about. */
|
|
if (cmd->autoneg != AUTONEG_ENABLE &&
|
|
cmd->autoneg != AUTONEG_DISABLE)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE &&
|
|
cmd->advertising == 0)
|
|
return -EINVAL;
|
|
|
|
if (cmd->autoneg == AUTONEG_DISABLE &&
|
|
((cmd->speed != SPEED_1000 &&
|
|
cmd->speed != SPEED_100 &&
|
|
cmd->speed != SPEED_10) ||
|
|
(cmd->duplex != DUPLEX_HALF &&
|
|
cmd->duplex != DUPLEX_FULL)))
|
|
return -EINVAL;
|
|
|
|
/* Apply settings and restart link process. */
|
|
spin_lock_irq(&gp->lock);
|
|
gem_get_cell(gp);
|
|
gem_begin_auto_negotiation(gp, cmd);
|
|
gem_put_cell(gp);
|
|
spin_unlock_irq(&gp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gem_nway_reset(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
if (!gp->want_autoneg)
|
|
return -EINVAL;
|
|
|
|
/* Restart link process. */
|
|
spin_lock_irq(&gp->lock);
|
|
gem_get_cell(gp);
|
|
gem_begin_auto_negotiation(gp, NULL);
|
|
gem_put_cell(gp);
|
|
spin_unlock_irq(&gp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 gem_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
return gp->msg_enable;
|
|
}
|
|
|
|
static void gem_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
gp->msg_enable = value;
|
|
}
|
|
|
|
|
|
/* Add more when I understand how to program the chip */
|
|
/* like WAKE_UCAST | WAKE_MCAST | WAKE_BCAST */
|
|
|
|
#define WOL_SUPPORTED_MASK (WAKE_MAGIC)
|
|
|
|
static void gem_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
/* Add more when I understand how to program the chip */
|
|
if (gp->has_wol) {
|
|
wol->supported = WOL_SUPPORTED_MASK;
|
|
wol->wolopts = gp->wake_on_lan;
|
|
} else {
|
|
wol->supported = 0;
|
|
wol->wolopts = 0;
|
|
}
|
|
}
|
|
|
|
static int gem_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
if (!gp->has_wol)
|
|
return -EOPNOTSUPP;
|
|
gp->wake_on_lan = wol->wolopts & WOL_SUPPORTED_MASK;
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops gem_ethtool_ops = {
|
|
.get_drvinfo = gem_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_settings = gem_get_settings,
|
|
.set_settings = gem_set_settings,
|
|
.nway_reset = gem_nway_reset,
|
|
.get_msglevel = gem_get_msglevel,
|
|
.set_msglevel = gem_set_msglevel,
|
|
.get_wol = gem_get_wol,
|
|
.set_wol = gem_set_wol,
|
|
};
|
|
|
|
static int gem_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct gem *gp = netdev_priv(dev);
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
int rc = -EOPNOTSUPP;
|
|
unsigned long flags;
|
|
|
|
/* Hold the PM mutex while doing ioctl's or we may collide
|
|
* with power management.
|
|
*/
|
|
mutex_lock(&gp->pm_mutex);
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
gem_get_cell(gp);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
|
data->phy_id = gp->mii_phy_addr;
|
|
/* Fallthrough... */
|
|
|
|
case SIOCGMIIREG: /* Read MII PHY register. */
|
|
if (!gp->running)
|
|
rc = -EAGAIN;
|
|
else {
|
|
data->val_out = __phy_read(gp, data->phy_id & 0x1f,
|
|
data->reg_num & 0x1f);
|
|
rc = 0;
|
|
}
|
|
break;
|
|
|
|
case SIOCSMIIREG: /* Write MII PHY register. */
|
|
if (!capable(CAP_NET_ADMIN))
|
|
rc = -EPERM;
|
|
else if (!gp->running)
|
|
rc = -EAGAIN;
|
|
else {
|
|
__phy_write(gp, data->phy_id & 0x1f, data->reg_num & 0x1f,
|
|
data->val_in);
|
|
rc = 0;
|
|
}
|
|
break;
|
|
};
|
|
|
|
spin_lock_irqsave(&gp->lock, flags);
|
|
gem_put_cell(gp);
|
|
spin_unlock_irqrestore(&gp->lock, flags);
|
|
|
|
mutex_unlock(&gp->pm_mutex);
|
|
|
|
return rc;
|
|
}
|
|
|
|
#if (!defined(CONFIG_SPARC) && !defined(CONFIG_PPC_PMAC))
|
|
/* Fetch MAC address from vital product data of PCI ROM. */
|
|
static int find_eth_addr_in_vpd(void __iomem *rom_base, int len, unsigned char *dev_addr)
|
|
{
|
|
int this_offset;
|
|
|
|
for (this_offset = 0x20; this_offset < len; this_offset++) {
|
|
void __iomem *p = rom_base + this_offset;
|
|
int i;
|
|
|
|
if (readb(p + 0) != 0x90 ||
|
|
readb(p + 1) != 0x00 ||
|
|
readb(p + 2) != 0x09 ||
|
|
readb(p + 3) != 0x4e ||
|
|
readb(p + 4) != 0x41 ||
|
|
readb(p + 5) != 0x06)
|
|
continue;
|
|
|
|
this_offset += 6;
|
|
p += 6;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
dev_addr[i] = readb(p + i);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void get_gem_mac_nonobp(struct pci_dev *pdev, unsigned char *dev_addr)
|
|
{
|
|
size_t size;
|
|
void __iomem *p = pci_map_rom(pdev, &size);
|
|
|
|
if (p) {
|
|
int found;
|
|
|
|
found = readb(p) == 0x55 &&
|
|
readb(p + 1) == 0xaa &&
|
|
find_eth_addr_in_vpd(p, (64 * 1024), dev_addr);
|
|
pci_unmap_rom(pdev, p);
|
|
if (found)
|
|
return;
|
|
}
|
|
|
|
/* Sun MAC prefix then 3 random bytes. */
|
|
dev_addr[0] = 0x08;
|
|
dev_addr[1] = 0x00;
|
|
dev_addr[2] = 0x20;
|
|
get_random_bytes(dev_addr + 3, 3);
|
|
return;
|
|
}
|
|
#endif /* not Sparc and not PPC */
|
|
|
|
static int __devinit gem_get_device_address(struct gem *gp)
|
|
{
|
|
#if defined(CONFIG_SPARC) || defined(CONFIG_PPC_PMAC)
|
|
struct net_device *dev = gp->dev;
|
|
const unsigned char *addr;
|
|
|
|
addr = of_get_property(gp->of_node, "local-mac-address", NULL);
|
|
if (addr == NULL) {
|
|
#ifdef CONFIG_SPARC
|
|
addr = idprom->id_ethaddr;
|
|
#else
|
|
printk("\n");
|
|
printk(KERN_ERR "%s: can't get mac-address\n", dev->name);
|
|
return -1;
|
|
#endif
|
|
}
|
|
memcpy(dev->dev_addr, addr, 6);
|
|
#else
|
|
get_gem_mac_nonobp(gp->pdev, gp->dev->dev_addr);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void gem_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
struct gem *gp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
|
|
/* Stop the link timer */
|
|
del_timer_sync(&gp->link_timer);
|
|
|
|
/* We shouldn't need any locking here */
|
|
gem_get_cell(gp);
|
|
|
|
/* Wait for a pending reset task to complete */
|
|
while (gp->reset_task_pending)
|
|
yield();
|
|
flush_scheduled_work();
|
|
|
|
/* Shut the PHY down */
|
|
gem_stop_phy(gp, 0);
|
|
|
|
gem_put_cell(gp);
|
|
|
|
/* Make sure bus master is disabled */
|
|
pci_disable_device(gp->pdev);
|
|
|
|
/* Free resources */
|
|
pci_free_consistent(pdev,
|
|
sizeof(struct gem_init_block),
|
|
gp->init_block,
|
|
gp->gblock_dvma);
|
|
iounmap(gp->regs);
|
|
pci_release_regions(pdev);
|
|
free_netdev(dev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
}
|
|
|
|
static const struct net_device_ops gem_netdev_ops = {
|
|
.ndo_open = gem_open,
|
|
.ndo_stop = gem_close,
|
|
.ndo_start_xmit = gem_start_xmit,
|
|
.ndo_get_stats = gem_get_stats,
|
|
.ndo_set_multicast_list = gem_set_multicast,
|
|
.ndo_do_ioctl = gem_ioctl,
|
|
.ndo_tx_timeout = gem_tx_timeout,
|
|
.ndo_change_mtu = gem_change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static int __devinit gem_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int gem_version_printed = 0;
|
|
unsigned long gemreg_base, gemreg_len;
|
|
struct net_device *dev;
|
|
struct gem *gp;
|
|
int err, pci_using_dac;
|
|
|
|
if (gem_version_printed++ == 0)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
/* Apple gmac note: during probe, the chip is powered up by
|
|
* the arch code to allow the code below to work (and to let
|
|
* the chip be probed on the config space. It won't stay powered
|
|
* up until the interface is brought up however, so we can't rely
|
|
* on register configuration done at this point.
|
|
*/
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot enable MMIO operation, "
|
|
"aborting.\n");
|
|
return err;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
/* Configure DMA attributes. */
|
|
|
|
/* All of the GEM documentation states that 64-bit DMA addressing
|
|
* is fully supported and should work just fine. However the
|
|
* front end for RIO based GEMs is different and only supports
|
|
* 32-bit addressing.
|
|
*
|
|
* For now we assume the various PPC GEMs are 32-bit only as well.
|
|
*/
|
|
if (pdev->vendor == PCI_VENDOR_ID_SUN &&
|
|
pdev->device == PCI_DEVICE_ID_SUN_GEM &&
|
|
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
pci_using_dac = 1;
|
|
} else {
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "No usable DMA configuration, "
|
|
"aborting.\n");
|
|
goto err_disable_device;
|
|
}
|
|
pci_using_dac = 0;
|
|
}
|
|
|
|
gemreg_base = pci_resource_start(pdev, 0);
|
|
gemreg_len = pci_resource_len(pdev, 0);
|
|
|
|
if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0) {
|
|
printk(KERN_ERR PFX "Cannot find proper PCI device "
|
|
"base address, aborting.\n");
|
|
err = -ENODEV;
|
|
goto err_disable_device;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(*gp));
|
|
if (!dev) {
|
|
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_disable_device;
|
|
}
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
gp = netdev_priv(dev);
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot obtain PCI resources, "
|
|
"aborting.\n");
|
|
goto err_out_free_netdev;
|
|
}
|
|
|
|
gp->pdev = pdev;
|
|
dev->base_addr = (long) pdev;
|
|
gp->dev = dev;
|
|
|
|
gp->msg_enable = DEFAULT_MSG;
|
|
|
|
spin_lock_init(&gp->lock);
|
|
spin_lock_init(&gp->tx_lock);
|
|
mutex_init(&gp->pm_mutex);
|
|
|
|
init_timer(&gp->link_timer);
|
|
gp->link_timer.function = gem_link_timer;
|
|
gp->link_timer.data = (unsigned long) gp;
|
|
|
|
INIT_WORK(&gp->reset_task, gem_reset_task);
|
|
|
|
gp->lstate = link_down;
|
|
gp->timer_ticks = 0;
|
|
netif_carrier_off(dev);
|
|
|
|
gp->regs = ioremap(gemreg_base, gemreg_len);
|
|
if (!gp->regs) {
|
|
printk(KERN_ERR PFX "Cannot map device registers, "
|
|
"aborting.\n");
|
|
err = -EIO;
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
/* On Apple, we want a reference to the Open Firmware device-tree
|
|
* node. We use it for clock control.
|
|
*/
|
|
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_SPARC)
|
|
gp->of_node = pci_device_to_OF_node(pdev);
|
|
#endif
|
|
|
|
/* Only Apple version supports WOL afaik */
|
|
if (pdev->vendor == PCI_VENDOR_ID_APPLE)
|
|
gp->has_wol = 1;
|
|
|
|
/* Make sure cell is enabled */
|
|
gem_get_cell(gp);
|
|
|
|
/* Make sure everything is stopped and in init state */
|
|
gem_reset(gp);
|
|
|
|
/* Fill up the mii_phy structure (even if we won't use it) */
|
|
gp->phy_mii.dev = dev;
|
|
gp->phy_mii.mdio_read = _phy_read;
|
|
gp->phy_mii.mdio_write = _phy_write;
|
|
#ifdef CONFIG_PPC_PMAC
|
|
gp->phy_mii.platform_data = gp->of_node;
|
|
#endif
|
|
/* By default, we start with autoneg */
|
|
gp->want_autoneg = 1;
|
|
|
|
/* Check fifo sizes, PHY type, etc... */
|
|
if (gem_check_invariants(gp)) {
|
|
err = -ENODEV;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
/* It is guaranteed that the returned buffer will be at least
|
|
* PAGE_SIZE aligned.
|
|
*/
|
|
gp->init_block = (struct gem_init_block *)
|
|
pci_alloc_consistent(pdev, sizeof(struct gem_init_block),
|
|
&gp->gblock_dvma);
|
|
if (!gp->init_block) {
|
|
printk(KERN_ERR PFX "Cannot allocate init block, "
|
|
"aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
if (gem_get_device_address(gp))
|
|
goto err_out_free_consistent;
|
|
|
|
dev->netdev_ops = &gem_netdev_ops;
|
|
netif_napi_add(dev, &gp->napi, gem_poll, 64);
|
|
dev->ethtool_ops = &gem_ethtool_ops;
|
|
dev->watchdog_timeo = 5 * HZ;
|
|
dev->irq = pdev->irq;
|
|
dev->dma = 0;
|
|
dev->set_mac_address = gem_set_mac_address;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = gem_poll_controller;
|
|
#endif
|
|
|
|
/* Set that now, in case PM kicks in now */
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
/* Detect & init PHY, start autoneg, we release the cell now
|
|
* too, it will be managed by whoever needs it
|
|
*/
|
|
gem_init_phy(gp);
|
|
|
|
spin_lock_irq(&gp->lock);
|
|
gem_put_cell(gp);
|
|
spin_unlock_irq(&gp->lock);
|
|
|
|
/* Register with kernel */
|
|
if (register_netdev(dev)) {
|
|
printk(KERN_ERR PFX "Cannot register net device, "
|
|
"aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_free_consistent;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: Sun GEM (PCI) 10/100/1000BaseT Ethernet %pM\n",
|
|
dev->name, dev->dev_addr);
|
|
|
|
if (gp->phy_type == phy_mii_mdio0 ||
|
|
gp->phy_type == phy_mii_mdio1)
|
|
printk(KERN_INFO "%s: Found %s PHY\n", dev->name,
|
|
gp->phy_mii.def ? gp->phy_mii.def->name : "no");
|
|
|
|
/* GEM can do it all... */
|
|
dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_LLTX;
|
|
if (pci_using_dac)
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
|
|
return 0;
|
|
|
|
err_out_free_consistent:
|
|
gem_remove_one(pdev);
|
|
err_out_iounmap:
|
|
gem_put_cell(gp);
|
|
iounmap(gp->regs);
|
|
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
|
|
err_out_free_netdev:
|
|
free_netdev(dev);
|
|
err_disable_device:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
static struct pci_driver gem_driver = {
|
|
.name = GEM_MODULE_NAME,
|
|
.id_table = gem_pci_tbl,
|
|
.probe = gem_init_one,
|
|
.remove = gem_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gem_suspend,
|
|
.resume = gem_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
static int __init gem_init(void)
|
|
{
|
|
return pci_register_driver(&gem_driver);
|
|
}
|
|
|
|
static void __exit gem_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&gem_driver);
|
|
}
|
|
|
|
module_init(gem_init);
|
|
module_exit(gem_cleanup);
|