forked from Minki/linux
7b215de3d0
Pull i2c updates from Wolfram Sang: "I2C has the following updates for 3.16: - major cleanups to the rcar and sh_mobile drivers - removal of nuc900 driver which had a compile error for years - usual bunch of driver updates, bugfixes and cleanups" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits) i2c: pca954x: Fix compilation without CONFIG_GPIOLIB i2c: mux: pca954x: Use the descriptor-based GPIO API i2c: mpc: insert DR read in i2c_fixup() i2c: bfin: turn to Resource-managed API in probe function i2c: Make of_device_id array const i2c: remove unnecessary OOM messages i2c: designware-pci: Add Haswell PCI IDs i2c: designware: Add runtime PM hooks i2c: designware: Disable device on system suspend i2c: nuc900: remove driver i2c: imx: update i2c clock divider for each transaction i2c: imx: fix the i2c bus hang issue when do repeat restart i2c: rcar: update copyright and license information i2c: rcar: janitorial cleanup after refactoring i2c: rcar: reuse status bits as enable bits i2c: rcar: remove spinlock i2c: rcar: refactor status bit handling i2c: rcar: refactor setting up msg i2c: rcar: check bus free before first message i2c: rcar: refactor irq state machine ...
529 lines
12 KiB
Plaintext
529 lines
12 KiB
Plaintext
/*
|
|
* Copyright 2012 Maxime Ripard
|
|
*
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
serial0 = &uart1;
|
|
serial1 = &uart3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a8";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x20000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
/*
|
|
* This is a dummy clock, to be used as placeholder on
|
|
* other mux clocks when a specific parent clock is not
|
|
* yet implemented. It should be dropped when the driver
|
|
* is complete.
|
|
*/
|
|
dummy: dummy {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc24M: clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: clk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
pll4: clk@01c20018 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20018 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll4";
|
|
};
|
|
|
|
pll5: clk@01c20020 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll5-clk";
|
|
reg = <0x01c20020 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll5_ddr", "pll5_other";
|
|
};
|
|
|
|
pll6: clk@01c20028 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll6-clk";
|
|
reg = <0x01c20028 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll6_sata", "pll6_other", "pll6";
|
|
};
|
|
|
|
/* dummy is 200M */
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-axi-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
axi_gates: clk@01c2005c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-axi-gates-clk";
|
|
reg = <0x01c2005c 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "axi_dram";
|
|
};
|
|
|
|
ahb: ahb@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "ahb";
|
|
};
|
|
|
|
ahb_gates: clk@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-ahb-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
|
|
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
|
|
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
|
|
"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
|
|
"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
|
|
"ahb_de_fe", "ahb_iep", "ahb_mali400";
|
|
};
|
|
|
|
apb0: apb0@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-apb0-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
|
|
};
|
|
|
|
apb1_mux: apb1_mux@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-mux-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
|
|
clock-output-names = "apb1_mux";
|
|
};
|
|
|
|
apb1: apb1@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&apb1_mux>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
apb1_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-apb1-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-output-names = "apb1_i2c0", "apb1_i2c1",
|
|
"apb1_i2c2", "apb1_uart1", "apb1_uart3";
|
|
};
|
|
|
|
nand_clk: clk@01c20080 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20080 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
ms_clk: clk@01c20084 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20084 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ms";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc0";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc1";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc2";
|
|
};
|
|
|
|
ts_clk: clk@01c20098 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20098 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ts";
|
|
};
|
|
|
|
ss_clk: clk@01c2009c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2009c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ss";
|
|
};
|
|
|
|
spi0_clk: clk@01c200a0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi0";
|
|
};
|
|
|
|
spi1_clk: clk@01c200a4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi1";
|
|
};
|
|
|
|
spi2_clk: clk@01c200a8 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a8 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi2";
|
|
};
|
|
|
|
ir0_clk: clk@01c200b0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir0";
|
|
};
|
|
|
|
usb_clk: clk@01c200cc {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-usb-clk";
|
|
reg = <0x01c200cc 0x4>;
|
|
clocks = <&pll6 1>;
|
|
clock-output-names = "usb_ohci0", "usb_phy";
|
|
};
|
|
|
|
mbus_clk: clk@01c2015c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2015c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mbus";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
spi0: spi@01c05000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c05000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&ahb_gates 20>, <&spi0_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@01c06000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c06000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&ahb_gates 21>, <&spi1_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc0: mmc@01c0f000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
|
clock-names = "ahb", "mmc";
|
|
interrupts = <32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc2: mmc@01c11000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
|
clock-names = "ahb", "mmc";
|
|
interrupts = <34>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy: phy@01c13400 {
|
|
#phy-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-usb-phy";
|
|
reg = <0x01c13400 0x10 0x01c14800 0x4>;
|
|
reg-names = "phy_ctrl", "pmu1";
|
|
clocks = <&usb_clk 8>;
|
|
clock-names = "usb_phy";
|
|
resets = <&usb_clk 1>;
|
|
reset-names = "usb1_reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci0: usb@01c14000 {
|
|
compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
|
|
reg = <0x01c14000 0x100>;
|
|
interrupts = <39>;
|
|
clocks = <&ahb_gates 1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@01c14400 {
|
|
compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
|
|
reg = <0x01c14400 0x100>;
|
|
interrupts = <40>;
|
|
clocks = <&usb_clk 6>, <&ahb_gates 2>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@01c17000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c17000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&ahb_gates 22>, <&spi2_clk>;
|
|
clock-names = "ahb", "mod";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@01c20400 {
|
|
compatible = "allwinner,sun4i-a10-ic";
|
|
reg = <0x01c20400 0x400>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun5i-a13-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <28>;
|
|
clocks = <&apb0_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart1_pins_a: uart1@0 {
|
|
allwinner,pins = "PE10", "PE11";
|
|
allwinner,function = "uart1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart1_pins_b: uart1@1 {
|
|
allwinner,pins = "PG3", "PG4";
|
|
allwinner,function = "uart1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
allwinner,pins = "PB0", "PB1";
|
|
allwinner,function = "i2c0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
allwinner,pins = "PB15", "PB16";
|
|
allwinner,function = "i2c1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
allwinner,pins = "PB17", "PB18";
|
|
allwinner,function = "i2c2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
mmc0_pins_a: mmc0@0 {
|
|
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
|
|
allwinner,function = "mmc0";
|
|
allwinner,drive = <2>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0x90>;
|
|
interrupts = <22>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt: watchdog@01c20c90 {
|
|
compatible = "allwinner,sun4i-a10-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
sid: eeprom@01c23800 {
|
|
compatible = "allwinner,sun4i-a10-sid";
|
|
reg = <0x01c23800 0x10>;
|
|
};
|
|
|
|
rtp: rtp@01c25000 {
|
|
compatible = "allwinner,sun4i-a10-ts";
|
|
reg = <0x01c25000 0x100>;
|
|
interrupts = <29>;
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <2>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <7>;
|
|
clocks = <&apb1_gates 0>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <8>;
|
|
clocks = <&apb1_gates 1>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <9>;
|
|
clocks = <&apb1_gates 2>;
|
|
clock-frequency = <100000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
timer@01c60000 {
|
|
compatible = "allwinner,sun5i-a13-hstimer";
|
|
reg = <0x01c60000 0x1000>;
|
|
interrupts = <82>, <83>;
|
|
clocks = <&ahb_gates 28>;
|
|
};
|
|
};
|
|
};
|