linux/drivers/bus
Afzal Mohammed 27b7d5f3cc bus: omap_l3_noc: Add AM4372 interconnect error data
Add AM4372 information to handle L3 error.

AM4372 has two clk domains 100f and 200s. Provide flagmux and data
associated with it.

NOTE: Timeout doesn't have STDERRLOG_MAIN register. And per hardware
team, L3 timeout error cannot be cleared the normal way (by setting
bit 31 in STDERRLOG_MAIN), instead it may be required to do system
reset. L3 error handler can't help in such scenarios.

Hence indicate timeout target offset as L3_TARGET_NOT_SUPPORTED as
done for undocumented bits.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
2014-05-05 14:34:37 -05:00
..
arm-cci.c drivers: bus: fix CCI driver kcalloc call parameters swap 2014-01-31 15:15:13 -08:00
imx-weim.c drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53 2013-08-16 12:59:44 +08:00
Kconfig drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53 2013-08-16 12:59:44 +08:00
Makefile ARM SoC device tree changes 2013-07-02 14:23:01 -07:00
mvebu-mbus.c bus: mvebu-mbus: Remove deprecated comment 2013-11-24 16:39:41 +00:00
omap_l3_noc.c bus: omap_l3_noc: Add AM4372 interconnect error data 2014-05-05 14:34:37 -05:00
omap_l3_noc.h bus: omap_l3_noc: Add AM4372 interconnect error data 2014-05-05 14:34:37 -05:00
omap_l3_smx.c
omap_l3_smx.h
omap-ocp2scp.c ARM: OMAP2+: Remove omap4 ocp2scp pdata 2013-05-30 13:09:31 -07:00