leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27b22e19f7
linux/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
Alexander Shiyan d8cae888aa ARM: dts: Add support for the cpuimx27 board from Eukrea and its baseboard 
This patch adds support for the cpuimx27 board from Eukrea and its
baseboard. This change is intended to further remove non-DT support
for this board.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:31 +08:00

297 lines
6.5 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx27.dtsi"
/ {
model = "Eukrea CPUIMX27";
compatible = "eukrea,cpuimx27", "fsl,imx27";
memory {
reg = <0xa0000000 0x04000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-bus";
clk14745600: clock@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
reg = <0>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire>;
status = "okay";
};
&sdhci2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdhc2>;
bus-width = <4>;
non-removable;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
fsl,uart-has-rtscts;
status = "okay";
};
&usbh2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh2>;
dr_mode = "host";
phy_type = "ulpi";
disable-over-current;
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
disable-over-current;
status = "okay";
};
&weim {
status = "okay";
nor: nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0 0x00000000 0x04000000>;
bank-width = <2>;
linux,mtd-name = "physmap-flash.0";
fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
};
uart8250@3,200000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_1>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x200000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_2>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x400000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,800000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_3>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x800000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
uart8250@3,1000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8250_4>;
compatible = "ns8250";
clocks = <&clk14745600>;
fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
reg = <3 0x1000000 0x1000>;
reg-shift = <1>;
reg-io-width = <1>;
no-loopback-test;
};
};
&iomuxc {
imx27-eukrea-cpuimx27 {
pinctrl_fec: fecgrp {
fsl,pins = <
MX27_PAD_SD3_CMD__FEC_TXD0 0x0
MX27_PAD_SD3_CLK__FEC_TXD1 0x0
MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
MX27_PAD_ATA_DATA7__FEC_MDC 0x0
MX27_PAD_ATA_DATA8__FEC_CRS 0x0
MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
MX27_PAD_ATA_DATA13__FEC_COL 0x0
MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C_DATA__I2C_DATA 0x0
MX27_PAD_I2C_CLK__I2C_CLK 0x0
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX27_PAD_NFRB__NFRB 0x0
MX27_PAD_NFCLE__NFCLE 0x0
MX27_PAD_NFWP_B__NFWP_B 0x0
MX27_PAD_NFCE_B__NFCE_B 0x0
MX27_PAD_NFALE__NFALE 0x0
MX27_PAD_NFRE_B__NFRE_B 0x0
MX27_PAD_NFWE_B__NFWE_B 0x0
>;
};
pinctrl_owire: owiregrp {
fsl,pins = <
MX27_PAD_RTCK__OWIRE 0x0
>;
};
pinctrl_sdhc2: sdhc2grp {
fsl,pins = <
MX27_PAD_SD2_CLK__SD2_CLK 0x0
MX27_PAD_SD2_CMD__SD2_CMD 0x0
MX27_PAD_SD2_D0__SD2_D0 0x0
MX27_PAD_SD2_D1__SD2_D1 0x0
MX27_PAD_SD2_D2__SD2_D2 0x0
MX27_PAD_SD2_D3__SD2_D3 0x0
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
MX27_PAD_USBH1_FS__UART4_RTS 0x0
>;
};
pinctrl_uart8250_1: uart82501grp {
fsl,pins = <
MX27_PAD_USB_PWR__GPIO2_23 0x0
>;
};
pinctrl_uart8250_2: uart82502grp {
fsl,pins = <
MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
>;
};
pinctrl_uart8250_3: uart82503grp {
fsl,pins = <
MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
>;
};
pinctrl_uart8250_4: uart82504grp {
fsl,pins = <
MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
>;
};
pinctrl_usbh2: usbh2grp {
fsl,pins = <
MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
MX27_PAD_USBH2_STP__USBH2_STP 0x0
MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink