forked from Minki/linux
3f17522ce4
On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
560 lines
13 KiB
C
560 lines
13 KiB
C
/*
|
|
* linux/drivers/video/amba-clcd.c
|
|
*
|
|
* Copyright (C) 2001 ARM Limited, by David A Rusling
|
|
* Updated to 2.5, Deep Blue Solutions Ltd.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* ARM PrimeCell PL110 Color LCD Controller
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/list.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/clcd.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/hardirq.h>
|
|
|
|
#include <asm/sizes.h>
|
|
|
|
#define to_clcd(info) container_of(info, struct clcd_fb, fb)
|
|
|
|
/* This is limited to 16 characters when displayed by X startup */
|
|
static const char *clcd_name = "CLCD FB";
|
|
|
|
/*
|
|
* Unfortunately, the enable/disable functions may be called either from
|
|
* process or IRQ context, and we _need_ to delay. This is _not_ good.
|
|
*/
|
|
static inline void clcdfb_sleep(unsigned int ms)
|
|
{
|
|
if (in_atomic()) {
|
|
mdelay(ms);
|
|
} else {
|
|
msleep(ms);
|
|
}
|
|
}
|
|
|
|
static inline void clcdfb_set_start(struct clcd_fb *fb)
|
|
{
|
|
unsigned long ustart = fb->fb.fix.smem_start;
|
|
unsigned long lstart;
|
|
|
|
ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
|
|
lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
|
|
|
|
writel(ustart, fb->regs + CLCD_UBAS);
|
|
writel(lstart, fb->regs + CLCD_LBAS);
|
|
}
|
|
|
|
static void clcdfb_disable(struct clcd_fb *fb)
|
|
{
|
|
u32 val;
|
|
|
|
if (fb->board->disable)
|
|
fb->board->disable(fb);
|
|
|
|
val = readl(fb->regs + fb->off_cntl);
|
|
if (val & CNTL_LCDPWR) {
|
|
val &= ~CNTL_LCDPWR;
|
|
writel(val, fb->regs + fb->off_cntl);
|
|
|
|
clcdfb_sleep(20);
|
|
}
|
|
if (val & CNTL_LCDEN) {
|
|
val &= ~CNTL_LCDEN;
|
|
writel(val, fb->regs + fb->off_cntl);
|
|
}
|
|
|
|
/*
|
|
* Disable CLCD clock source.
|
|
*/
|
|
clk_disable(fb->clk);
|
|
}
|
|
|
|
static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
|
|
{
|
|
/*
|
|
* Enable the CLCD clock source.
|
|
*/
|
|
clk_enable(fb->clk);
|
|
|
|
/*
|
|
* Bring up by first enabling..
|
|
*/
|
|
cntl |= CNTL_LCDEN;
|
|
writel(cntl, fb->regs + fb->off_cntl);
|
|
|
|
clcdfb_sleep(20);
|
|
|
|
/*
|
|
* and now apply power.
|
|
*/
|
|
cntl |= CNTL_LCDPWR;
|
|
writel(cntl, fb->regs + fb->off_cntl);
|
|
|
|
/*
|
|
* finally, enable the interface.
|
|
*/
|
|
if (fb->board->enable)
|
|
fb->board->enable(fb);
|
|
}
|
|
|
|
static int
|
|
clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
|
|
{
|
|
int ret = 0;
|
|
|
|
memset(&var->transp, 0, sizeof(var->transp));
|
|
|
|
var->red.msb_right = 0;
|
|
var->green.msb_right = 0;
|
|
var->blue.msb_right = 0;
|
|
|
|
switch (var->bits_per_pixel) {
|
|
case 1:
|
|
case 2:
|
|
case 4:
|
|
case 8:
|
|
var->red.length = var->bits_per_pixel;
|
|
var->red.offset = 0;
|
|
var->green.length = var->bits_per_pixel;
|
|
var->green.offset = 0;
|
|
var->blue.length = var->bits_per_pixel;
|
|
var->blue.offset = 0;
|
|
break;
|
|
case 16:
|
|
var->red.length = 5;
|
|
var->blue.length = 5;
|
|
/*
|
|
* Green length can be 5 or 6 depending whether
|
|
* we're operating in RGB555 or RGB565 mode.
|
|
*/
|
|
if (var->green.length != 5 && var->green.length != 6)
|
|
var->green.length = 6;
|
|
break;
|
|
case 32:
|
|
if (fb->panel->cntl & CNTL_LCDTFT) {
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
break;
|
|
}
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* >= 16bpp displays have separate colour component bitfields
|
|
* encoded in the pixel data. Calculate their position from
|
|
* the bitfield length defined above.
|
|
*/
|
|
if (ret == 0 && var->bits_per_pixel >= 16) {
|
|
if (fb->panel->cntl & CNTL_BGR) {
|
|
var->blue.offset = 0;
|
|
var->green.offset = var->blue.offset + var->blue.length;
|
|
var->red.offset = var->green.offset + var->green.length;
|
|
} else {
|
|
var->red.offset = 0;
|
|
var->green.offset = var->red.offset + var->red.length;
|
|
var->blue.offset = var->green.offset + var->green.length;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
struct clcd_fb *fb = to_clcd(info);
|
|
int ret = -EINVAL;
|
|
|
|
if (fb->board->check)
|
|
ret = fb->board->check(fb, var);
|
|
|
|
if (ret == 0 &&
|
|
var->xres_virtual * var->bits_per_pixel / 8 *
|
|
var->yres_virtual > fb->fb.fix.smem_len)
|
|
ret = -EINVAL;
|
|
|
|
if (ret == 0)
|
|
ret = clcdfb_set_bitfields(fb, var);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int clcdfb_set_par(struct fb_info *info)
|
|
{
|
|
struct clcd_fb *fb = to_clcd(info);
|
|
struct clcd_regs regs;
|
|
|
|
fb->fb.fix.line_length = fb->fb.var.xres_virtual *
|
|
fb->fb.var.bits_per_pixel / 8;
|
|
|
|
if (fb->fb.var.bits_per_pixel <= 8)
|
|
fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
else
|
|
fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
|
|
|
|
fb->board->decode(fb, ®s);
|
|
|
|
clcdfb_disable(fb);
|
|
|
|
writel(regs.tim0, fb->regs + CLCD_TIM0);
|
|
writel(regs.tim1, fb->regs + CLCD_TIM1);
|
|
writel(regs.tim2, fb->regs + CLCD_TIM2);
|
|
writel(regs.tim3, fb->regs + CLCD_TIM3);
|
|
|
|
clcdfb_set_start(fb);
|
|
|
|
clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
|
|
|
|
fb->clcd_cntl = regs.cntl;
|
|
|
|
clcdfb_enable(fb, regs.cntl);
|
|
|
|
#ifdef DEBUG
|
|
printk(KERN_INFO
|
|
"CLCD: Registers set to\n"
|
|
" %08x %08x %08x %08x\n"
|
|
" %08x %08x %08x %08x\n",
|
|
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
|
|
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
|
|
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
|
|
readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
|
|
{
|
|
unsigned int mask = (1 << bf->length) - 1;
|
|
|
|
return (val >> (16 - bf->length) & mask) << bf->offset;
|
|
}
|
|
|
|
/*
|
|
* Set a single color register. The values supplied have a 16 bit
|
|
* magnitude. Return != 0 for invalid regno.
|
|
*/
|
|
static int
|
|
clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
|
|
unsigned int blue, unsigned int transp, struct fb_info *info)
|
|
{
|
|
struct clcd_fb *fb = to_clcd(info);
|
|
|
|
if (regno < 16)
|
|
fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
|
|
convert_bitfield(blue, &fb->fb.var.blue) |
|
|
convert_bitfield(green, &fb->fb.var.green) |
|
|
convert_bitfield(red, &fb->fb.var.red);
|
|
|
|
if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
|
|
int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
|
|
u32 val, mask, newval;
|
|
|
|
newval = (red >> 11) & 0x001f;
|
|
newval |= (green >> 6) & 0x03e0;
|
|
newval |= (blue >> 1) & 0x7c00;
|
|
|
|
/*
|
|
* 3.2.11: if we're configured for big endian
|
|
* byte order, the palette entries are swapped.
|
|
*/
|
|
if (fb->clcd_cntl & CNTL_BEBO)
|
|
regno ^= 1;
|
|
|
|
if (regno & 1) {
|
|
newval <<= 16;
|
|
mask = 0x0000ffff;
|
|
} else {
|
|
mask = 0xffff0000;
|
|
}
|
|
|
|
val = readl(fb->regs + hw_reg) & mask;
|
|
writel(val | newval, fb->regs + hw_reg);
|
|
}
|
|
|
|
return regno > 255;
|
|
}
|
|
|
|
/*
|
|
* Blank the screen if blank_mode != 0, else unblank. If blank == NULL
|
|
* then the caller blanks by setting the CLUT (Color Look Up Table) to all
|
|
* black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
|
|
* to e.g. a video mode which doesn't support it. Implements VESA suspend
|
|
* and powerdown modes on hardware that supports disabling hsync/vsync:
|
|
* blank_mode == 2: suspend vsync
|
|
* blank_mode == 3: suspend hsync
|
|
* blank_mode == 4: powerdown
|
|
*/
|
|
static int clcdfb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
struct clcd_fb *fb = to_clcd(info);
|
|
|
|
if (blank_mode != 0) {
|
|
clcdfb_disable(fb);
|
|
} else {
|
|
clcdfb_enable(fb, fb->clcd_cntl);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int clcdfb_mmap(struct fb_info *info,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
struct clcd_fb *fb = to_clcd(info);
|
|
unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
|
|
int ret = -EINVAL;
|
|
|
|
len = info->fix.smem_len;
|
|
|
|
if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
|
|
fb->board->mmap)
|
|
ret = fb->board->mmap(fb, vma);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct fb_ops clcdfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = clcdfb_check_var,
|
|
.fb_set_par = clcdfb_set_par,
|
|
.fb_setcolreg = clcdfb_setcolreg,
|
|
.fb_blank = clcdfb_blank,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
.fb_mmap = clcdfb_mmap,
|
|
};
|
|
|
|
static int clcdfb_register(struct clcd_fb *fb)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* ARM PL111 always has IENB at 0x1c; it's only PL110
|
|
* which is reversed on some platforms.
|
|
*/
|
|
if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
|
|
fb->off_ienb = CLCD_PL111_IENB;
|
|
fb->off_cntl = CLCD_PL111_CNTL;
|
|
} else {
|
|
#ifdef CONFIG_ARCH_VERSATILE
|
|
fb->off_ienb = CLCD_PL111_IENB;
|
|
fb->off_cntl = CLCD_PL111_CNTL;
|
|
#else
|
|
fb->off_ienb = CLCD_PL110_IENB;
|
|
fb->off_cntl = CLCD_PL110_CNTL;
|
|
#endif
|
|
}
|
|
|
|
fb->clk = clk_get(&fb->dev->dev, NULL);
|
|
if (IS_ERR(fb->clk)) {
|
|
ret = PTR_ERR(fb->clk);
|
|
goto out;
|
|
}
|
|
|
|
fb->fb.fix.mmio_start = fb->dev->res.start;
|
|
fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
|
|
|
|
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
|
|
if (!fb->regs) {
|
|
printk(KERN_ERR "CLCD: unable to remap registers\n");
|
|
ret = -ENOMEM;
|
|
goto free_clk;
|
|
}
|
|
|
|
fb->fb.fbops = &clcdfb_ops;
|
|
fb->fb.flags = FBINFO_FLAG_DEFAULT;
|
|
fb->fb.pseudo_palette = fb->cmap;
|
|
|
|
strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
|
|
fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
|
|
fb->fb.fix.type_aux = 0;
|
|
fb->fb.fix.xpanstep = 0;
|
|
fb->fb.fix.ypanstep = 0;
|
|
fb->fb.fix.ywrapstep = 0;
|
|
fb->fb.fix.accel = FB_ACCEL_NONE;
|
|
|
|
fb->fb.var.xres = fb->panel->mode.xres;
|
|
fb->fb.var.yres = fb->panel->mode.yres;
|
|
fb->fb.var.xres_virtual = fb->panel->mode.xres;
|
|
fb->fb.var.yres_virtual = fb->panel->mode.yres;
|
|
fb->fb.var.bits_per_pixel = fb->panel->bpp;
|
|
fb->fb.var.grayscale = fb->panel->grayscale;
|
|
fb->fb.var.pixclock = fb->panel->mode.pixclock;
|
|
fb->fb.var.left_margin = fb->panel->mode.left_margin;
|
|
fb->fb.var.right_margin = fb->panel->mode.right_margin;
|
|
fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
|
|
fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
|
|
fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
|
|
fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
|
|
fb->fb.var.sync = fb->panel->mode.sync;
|
|
fb->fb.var.vmode = fb->panel->mode.vmode;
|
|
fb->fb.var.activate = FB_ACTIVATE_NOW;
|
|
fb->fb.var.nonstd = 0;
|
|
fb->fb.var.height = fb->panel->height;
|
|
fb->fb.var.width = fb->panel->width;
|
|
fb->fb.var.accel_flags = 0;
|
|
|
|
fb->fb.monspecs.hfmin = 0;
|
|
fb->fb.monspecs.hfmax = 100000;
|
|
fb->fb.monspecs.vfmin = 0;
|
|
fb->fb.monspecs.vfmax = 400;
|
|
fb->fb.monspecs.dclkmin = 1000000;
|
|
fb->fb.monspecs.dclkmax = 100000000;
|
|
|
|
/*
|
|
* Make sure that the bitfields are set appropriately.
|
|
*/
|
|
clcdfb_set_bitfields(fb, &fb->fb.var);
|
|
|
|
/*
|
|
* Allocate colourmap.
|
|
*/
|
|
ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
|
|
if (ret)
|
|
goto unmap;
|
|
|
|
/*
|
|
* Ensure interrupts are disabled.
|
|
*/
|
|
writel(0, fb->regs + fb->off_ienb);
|
|
|
|
fb_set_var(&fb->fb, &fb->fb.var);
|
|
|
|
printk(KERN_INFO "CLCD: %s hardware, %s display\n",
|
|
fb->board->name, fb->panel->mode.name);
|
|
|
|
ret = register_framebuffer(&fb->fb);
|
|
if (ret == 0)
|
|
goto out;
|
|
|
|
printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
|
|
|
|
fb_dealloc_cmap(&fb->fb.cmap);
|
|
unmap:
|
|
iounmap(fb->regs);
|
|
free_clk:
|
|
clk_put(fb->clk);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
|
|
{
|
|
struct clcd_board *board = dev->dev.platform_data;
|
|
struct clcd_fb *fb;
|
|
int ret;
|
|
|
|
if (!board)
|
|
return -EINVAL;
|
|
|
|
ret = amba_request_regions(dev, NULL);
|
|
if (ret) {
|
|
printk(KERN_ERR "CLCD: unable to reserve regs region\n");
|
|
goto out;
|
|
}
|
|
|
|
fb = kzalloc(sizeof(struct clcd_fb), GFP_KERNEL);
|
|
if (!fb) {
|
|
printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
|
|
ret = -ENOMEM;
|
|
goto free_region;
|
|
}
|
|
|
|
fb->dev = dev;
|
|
fb->board = board;
|
|
|
|
ret = fb->board->setup(fb);
|
|
if (ret)
|
|
goto free_fb;
|
|
|
|
ret = clcdfb_register(fb);
|
|
if (ret == 0) {
|
|
amba_set_drvdata(dev, fb);
|
|
goto out;
|
|
}
|
|
|
|
fb->board->remove(fb);
|
|
free_fb:
|
|
kfree(fb);
|
|
free_region:
|
|
amba_release_regions(dev);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int clcdfb_remove(struct amba_device *dev)
|
|
{
|
|
struct clcd_fb *fb = amba_get_drvdata(dev);
|
|
|
|
amba_set_drvdata(dev, NULL);
|
|
|
|
clcdfb_disable(fb);
|
|
unregister_framebuffer(&fb->fb);
|
|
if (fb->fb.cmap.len)
|
|
fb_dealloc_cmap(&fb->fb.cmap);
|
|
iounmap(fb->regs);
|
|
clk_put(fb->clk);
|
|
|
|
fb->board->remove(fb);
|
|
|
|
kfree(fb);
|
|
|
|
amba_release_regions(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct amba_id clcdfb_id_table[] = {
|
|
{
|
|
.id = 0x00041110,
|
|
.mask = 0x000ffffe,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
|
|
static struct amba_driver clcd_driver = {
|
|
.drv = {
|
|
.name = "clcd-pl11x",
|
|
},
|
|
.probe = clcdfb_probe,
|
|
.remove = clcdfb_remove,
|
|
.id_table = clcdfb_id_table,
|
|
};
|
|
|
|
static int __init amba_clcdfb_init(void)
|
|
{
|
|
if (fb_get_options("ambafb", NULL))
|
|
return -ENODEV;
|
|
|
|
return amba_driver_register(&clcd_driver);
|
|
}
|
|
|
|
module_init(amba_clcdfb_init);
|
|
|
|
static void __exit amba_clcdfb_exit(void)
|
|
{
|
|
amba_driver_unregister(&clcd_driver);
|
|
}
|
|
|
|
module_exit(amba_clcdfb_exit);
|
|
|
|
MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
|
|
MODULE_LICENSE("GPL");
|