linux/drivers/net/dsa/mv88e6060.c
Andrew Lunn 277617603c net: dsa: mv88e6060: Support probing as an mdio device
Probing DSA devices as platform devices has been superseded by using
normal bus drivers. Add support for probing the mv88e6060 device as an
mdio device.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30 23:13:33 -04:00

353 lines
8.0 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
* Copyright (c) 2008-2009 Marvell Semiconductor
*/
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/jiffies.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <net/dsa.h>
#include "mv88e6060.h"
static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
{
return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
}
static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
{
return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
}
static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
{
int ret;
ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
if (ret >= 0) {
if (ret == PORT_SWITCH_ID_6060)
return "Marvell 88E6060 (A0)";
if (ret == PORT_SWITCH_ID_6060_R1 ||
ret == PORT_SWITCH_ID_6060_R2)
return "Marvell 88E6060 (B0)";
if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
return "Marvell 88E6060";
}
return NULL;
}
static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
int port)
{
return DSA_TAG_PROTO_TRAILER;
}
static const char *mv88e6060_drv_probe(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **_priv)
{
struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
struct mv88e6060_priv *priv;
const char *name;
name = mv88e6060_get_name(bus, sw_addr);
if (name) {
priv = devm_kzalloc(dsa_dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return NULL;
*_priv = priv;
priv->bus = bus;
priv->sw_addr = sw_addr;
}
return name;
}
static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
{
int i;
int ret;
unsigned long timeout;
/* Set all ports to the disabled state. */
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
if (ret < 0)
return ret;
ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
ret & ~PORT_CONTROL_STATE_MASK);
if (ret)
return ret;
}
/* Wait for transmit queues to drain. */
usleep_range(2000, 4000);
/* Reset the switch. */
ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_SWRESET |
GLOBAL_ATU_CONTROL_LEARNDIS);
if (ret)
return ret;
/* Wait up to one second for reset to complete. */
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
if (ret < 0)
return ret;
if (ret & GLOBAL_STATUS_INIT_READY)
break;
usleep_range(1000, 2000);
}
if (time_after(jiffies, timeout))
return -ETIMEDOUT;
return 0;
}
static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
{
int ret;
/* Disable discarding of frames with excessive collisions,
* set the maximum frame size to 1536 bytes, and mask all
* interrupt sources.
*/
ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
GLOBAL_CONTROL_MAX_FRAME_1536);
if (ret)
return ret;
/* Disable automatic address learning.
*/
return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
GLOBAL_ATU_CONTROL_LEARNDIS);
}
static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
{
int addr = REG_PORT(p);
int ret;
/* Do not force flow control, disable Ingress and Egress
* Header tagging, disable VLAN tunneling, and set the port
* state to Forwarding. Additionally, if this is the CPU
* port, enable Ingress and Egress Trailer tagging mode.
*/
ret = reg_write(priv, addr, PORT_CONTROL,
dsa_is_cpu_port(priv->ds, p) ?
PORT_CONTROL_TRAILER |
PORT_CONTROL_INGRESS_MODE |
PORT_CONTROL_STATE_FORWARDING :
PORT_CONTROL_STATE_FORWARDING);
if (ret)
return ret;
/* Port based VLAN map: give each port its own address
* database, allow the CPU port to talk to each of the 'real'
* ports, and allow each of the 'real' ports to only talk to
* the CPU port.
*/
ret = reg_write(priv, addr, PORT_VLAN_MAP,
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(priv->ds, p) ?
dsa_user_ports(priv->ds) :
BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
if (ret)
return ret;
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
* a port bitmap that has only the bit for this port set and
* the other bits clear.
*/
return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
}
static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
{
u8 addr[ETH_ALEN];
int ret;
u16 val;
eth_random_addr(addr);
val = addr[0] << 8 | addr[1];
/* The multicast bit is always transmitted as a zero, so the switch uses
* bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
*/
val &= 0xfeff;
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
if (ret)
return ret;
ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
(addr[2] << 8) | addr[3]);
if (ret)
return ret;
return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
(addr[4] << 8) | addr[5]);
}
static int mv88e6060_setup(struct dsa_switch *ds)
{
struct mv88e6060_priv *priv = ds->priv;
int ret;
int i;
priv->ds = ds;
ret = mv88e6060_switch_reset(priv);
if (ret < 0)
return ret;
/* @@@ initialise atu */
ret = mv88e6060_setup_global(priv);
if (ret < 0)
return ret;
ret = mv88e6060_setup_addr(priv);
if (ret < 0)
return ret;
for (i = 0; i < MV88E6060_PORTS; i++) {
ret = mv88e6060_setup_port(priv, i);
if (ret < 0)
return ret;
}
return 0;
}
static int mv88e6060_port_to_phy_addr(int port)
{
if (port >= 0 && port < MV88E6060_PORTS)
return port;
return -1;
}
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_read(priv, addr, regnum);
}
static int
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
{
struct mv88e6060_priv *priv = ds->priv;
int addr;
addr = mv88e6060_port_to_phy_addr(port);
if (addr == -1)
return 0xffff;
return reg_write(priv, addr, regnum, val);
}
static const struct dsa_switch_ops mv88e6060_switch_ops = {
.get_tag_protocol = mv88e6060_get_tag_protocol,
.probe = mv88e6060_drv_probe,
.setup = mv88e6060_setup,
.phy_read = mv88e6060_phy_read,
.phy_write = mv88e6060_phy_write,
};
static struct dsa_switch_driver mv88e6060_switch_drv = {
.ops = &mv88e6060_switch_ops,
};
static int mv88e6060_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct mv88e6060_priv *priv;
struct dsa_switch *ds;
const char *name;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->bus = mdiodev->bus;
priv->sw_addr = mdiodev->addr;
name = mv88e6060_get_name(priv->bus, priv->sw_addr);
if (!name)
return -ENODEV;
dev_info(dev, "switch %s detected\n", name);
ds = dsa_switch_alloc(dev, MV88E6060_PORTS);
if (!ds)
return -ENOMEM;
ds->priv = priv;
ds->dev = dev;
ds->ops = &mv88e6060_switch_ops;
dev_set_drvdata(dev, ds);
return dsa_register_switch(ds);
}
static void mv88e6060_remove(struct mdio_device *mdiodev)
{
struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
dsa_unregister_switch(ds);
}
static const struct of_device_id mv88e6060_of_match[] = {
{
.compatible = "marvell,mv88e6060",
},
{ /* sentinel */ },
};
static struct mdio_driver mv88e6060_driver = {
.probe = mv88e6060_probe,
.remove = mv88e6060_remove,
.mdiodrv.driver = {
.name = "mv88e6060",
.of_match_table = mv88e6060_of_match,
},
};
static int __init mv88e6060_init(void)
{
register_switch_driver(&mv88e6060_switch_drv);
return mdio_driver_register(&mv88e6060_driver);
}
module_init(mv88e6060_init);
static void __exit mv88e6060_cleanup(void)
{
mdio_driver_unregister(&mv88e6060_driver);
unregister_switch_driver(&mv88e6060_switch_drv);
}
module_exit(mv88e6060_cleanup);
MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:mv88e6060");