SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org> Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> [robclark minor rebase] Signed-off-by: Rob Clark <robdclark@gmail.com>
350 lines
9.8 KiB
C
350 lines
9.8 KiB
C
/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "dpu_hwio.h"
|
|
#include "dpu_hw_catalog.h"
|
|
#include "dpu_hw_intf.h"
|
|
#include "dpu_dbg.h"
|
|
#include "dpu_kms.h"
|
|
|
|
#define INTF_TIMING_ENGINE_EN 0x000
|
|
#define INTF_CONFIG 0x004
|
|
#define INTF_HSYNC_CTL 0x008
|
|
#define INTF_VSYNC_PERIOD_F0 0x00C
|
|
#define INTF_VSYNC_PERIOD_F1 0x010
|
|
#define INTF_VSYNC_PULSE_WIDTH_F0 0x014
|
|
#define INTF_VSYNC_PULSE_WIDTH_F1 0x018
|
|
#define INTF_DISPLAY_V_START_F0 0x01C
|
|
#define INTF_DISPLAY_V_START_F1 0x020
|
|
#define INTF_DISPLAY_V_END_F0 0x024
|
|
#define INTF_DISPLAY_V_END_F1 0x028
|
|
#define INTF_ACTIVE_V_START_F0 0x02C
|
|
#define INTF_ACTIVE_V_START_F1 0x030
|
|
#define INTF_ACTIVE_V_END_F0 0x034
|
|
#define INTF_ACTIVE_V_END_F1 0x038
|
|
#define INTF_DISPLAY_HCTL 0x03C
|
|
#define INTF_ACTIVE_HCTL 0x040
|
|
#define INTF_BORDER_COLOR 0x044
|
|
#define INTF_UNDERFLOW_COLOR 0x048
|
|
#define INTF_HSYNC_SKEW 0x04C
|
|
#define INTF_POLARITY_CTL 0x050
|
|
#define INTF_TEST_CTL 0x054
|
|
#define INTF_TP_COLOR0 0x058
|
|
#define INTF_TP_COLOR1 0x05C
|
|
#define INTF_FRAME_LINE_COUNT_EN 0x0A8
|
|
#define INTF_FRAME_COUNT 0x0AC
|
|
#define INTF_LINE_COUNT 0x0B0
|
|
|
|
#define INTF_DEFLICKER_CONFIG 0x0F0
|
|
#define INTF_DEFLICKER_STRNG_COEFF 0x0F4
|
|
#define INTF_DEFLICKER_WEAK_COEFF 0x0F8
|
|
|
|
#define INTF_DSI_CMD_MODE_TRIGGER_EN 0x084
|
|
#define INTF_PANEL_FORMAT 0x090
|
|
#define INTF_TPG_ENABLE 0x100
|
|
#define INTF_TPG_MAIN_CONTROL 0x104
|
|
#define INTF_TPG_VIDEO_CONFIG 0x108
|
|
#define INTF_TPG_COMPONENT_LIMITS 0x10C
|
|
#define INTF_TPG_RECTANGLE 0x110
|
|
#define INTF_TPG_INITIAL_VALUE 0x114
|
|
#define INTF_TPG_BLK_WHITE_PATTERN_FRAMES 0x118
|
|
#define INTF_TPG_RGB_MAPPING 0x11C
|
|
#define INTF_PROG_FETCH_START 0x170
|
|
#define INTF_PROG_ROT_START 0x174
|
|
|
|
#define INTF_FRAME_LINE_COUNT_EN 0x0A8
|
|
#define INTF_FRAME_COUNT 0x0AC
|
|
#define INTF_LINE_COUNT 0x0B0
|
|
|
|
#define INTF_MISR_CTRL 0x180
|
|
#define INTF_MISR_SIGNATURE 0x184
|
|
|
|
static struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
|
|
struct dpu_mdss_cfg *m,
|
|
void __iomem *addr,
|
|
struct dpu_hw_blk_reg_map *b)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < m->intf_count; i++) {
|
|
if ((intf == m->intf[i].id) &&
|
|
(m->intf[i].type != INTF_NONE)) {
|
|
b->base_off = addr;
|
|
b->blk_off = m->intf[i].base;
|
|
b->length = m->intf[i].len;
|
|
b->hwversion = m->hwversion;
|
|
b->log_mask = DPU_DBG_MASK_INTF;
|
|
return &m->intf[i];
|
|
}
|
|
}
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
|
|
const struct intf_timing_params *p,
|
|
const struct dpu_format *fmt)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &ctx->hw;
|
|
u32 hsync_period, vsync_period;
|
|
u32 display_v_start, display_v_end;
|
|
u32 hsync_start_x, hsync_end_x;
|
|
u32 active_h_start, active_h_end;
|
|
u32 active_v_start, active_v_end;
|
|
u32 active_hctl, display_hctl, hsync_ctl;
|
|
u32 polarity_ctl, den_polarity, hsync_polarity, vsync_polarity;
|
|
u32 panel_format;
|
|
u32 intf_cfg;
|
|
|
|
/* read interface_cfg */
|
|
intf_cfg = DPU_REG_READ(c, INTF_CONFIG);
|
|
hsync_period = p->hsync_pulse_width + p->h_back_porch + p->width +
|
|
p->h_front_porch;
|
|
vsync_period = p->vsync_pulse_width + p->v_back_porch + p->height +
|
|
p->v_front_porch;
|
|
|
|
display_v_start = ((p->vsync_pulse_width + p->v_back_porch) *
|
|
hsync_period) + p->hsync_skew;
|
|
display_v_end = ((vsync_period - p->v_front_porch) * hsync_period) +
|
|
p->hsync_skew - 1;
|
|
|
|
if (ctx->cap->type == INTF_EDP || ctx->cap->type == INTF_DP) {
|
|
display_v_start += p->hsync_pulse_width + p->h_back_porch;
|
|
display_v_end -= p->h_front_porch;
|
|
}
|
|
|
|
hsync_start_x = p->h_back_porch + p->hsync_pulse_width;
|
|
hsync_end_x = hsync_period - p->h_front_porch - 1;
|
|
|
|
if (p->width != p->xres) {
|
|
active_h_start = hsync_start_x;
|
|
active_h_end = active_h_start + p->xres - 1;
|
|
} else {
|
|
active_h_start = 0;
|
|
active_h_end = 0;
|
|
}
|
|
|
|
if (p->height != p->yres) {
|
|
active_v_start = display_v_start;
|
|
active_v_end = active_v_start + (p->yres * hsync_period) - 1;
|
|
} else {
|
|
active_v_start = 0;
|
|
active_v_end = 0;
|
|
}
|
|
|
|
if (active_h_end) {
|
|
active_hctl = (active_h_end << 16) | active_h_start;
|
|
intf_cfg |= BIT(29); /* ACTIVE_H_ENABLE */
|
|
} else {
|
|
active_hctl = 0;
|
|
}
|
|
|
|
if (active_v_end)
|
|
intf_cfg |= BIT(30); /* ACTIVE_V_ENABLE */
|
|
|
|
hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
|
|
display_hctl = (hsync_end_x << 16) | hsync_start_x;
|
|
|
|
den_polarity = 0;
|
|
if (ctx->cap->type == INTF_HDMI) {
|
|
hsync_polarity = p->yres >= 720 ? 0 : 1;
|
|
vsync_polarity = p->yres >= 720 ? 0 : 1;
|
|
} else {
|
|
hsync_polarity = 0;
|
|
vsync_polarity = 0;
|
|
}
|
|
polarity_ctl = (den_polarity << 2) | /* DEN Polarity */
|
|
(vsync_polarity << 1) | /* VSYNC Polarity */
|
|
(hsync_polarity << 0); /* HSYNC Polarity */
|
|
|
|
if (!DPU_FORMAT_IS_YUV(fmt))
|
|
panel_format = (fmt->bits[C0_G_Y] |
|
|
(fmt->bits[C1_B_Cb] << 2) |
|
|
(fmt->bits[C2_R_Cr] << 4) |
|
|
(0x21 << 8));
|
|
else
|
|
/* Interface treats all the pixel data in RGB888 format */
|
|
panel_format = (COLOR_8BIT |
|
|
(COLOR_8BIT << 2) |
|
|
(COLOR_8BIT << 4) |
|
|
(0x21 << 8));
|
|
|
|
DPU_REG_WRITE(c, INTF_HSYNC_CTL, hsync_ctl);
|
|
DPU_REG_WRITE(c, INTF_VSYNC_PERIOD_F0, vsync_period * hsync_period);
|
|
DPU_REG_WRITE(c, INTF_VSYNC_PULSE_WIDTH_F0,
|
|
p->vsync_pulse_width * hsync_period);
|
|
DPU_REG_WRITE(c, INTF_DISPLAY_HCTL, display_hctl);
|
|
DPU_REG_WRITE(c, INTF_DISPLAY_V_START_F0, display_v_start);
|
|
DPU_REG_WRITE(c, INTF_DISPLAY_V_END_F0, display_v_end);
|
|
DPU_REG_WRITE(c, INTF_ACTIVE_HCTL, active_hctl);
|
|
DPU_REG_WRITE(c, INTF_ACTIVE_V_START_F0, active_v_start);
|
|
DPU_REG_WRITE(c, INTF_ACTIVE_V_END_F0, active_v_end);
|
|
DPU_REG_WRITE(c, INTF_BORDER_COLOR, p->border_clr);
|
|
DPU_REG_WRITE(c, INTF_UNDERFLOW_COLOR, p->underflow_clr);
|
|
DPU_REG_WRITE(c, INTF_HSYNC_SKEW, p->hsync_skew);
|
|
DPU_REG_WRITE(c, INTF_POLARITY_CTL, polarity_ctl);
|
|
DPU_REG_WRITE(c, INTF_FRAME_LINE_COUNT_EN, 0x3);
|
|
DPU_REG_WRITE(c, INTF_CONFIG, intf_cfg);
|
|
DPU_REG_WRITE(c, INTF_PANEL_FORMAT, panel_format);
|
|
}
|
|
|
|
static void dpu_hw_intf_enable_timing_engine(
|
|
struct dpu_hw_intf *intf,
|
|
u8 enable)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &intf->hw;
|
|
/* Note: Display interface select is handled in top block hw layer */
|
|
DPU_REG_WRITE(c, INTF_TIMING_ENGINE_EN, enable != 0);
|
|
}
|
|
|
|
static void dpu_hw_intf_setup_prg_fetch(
|
|
struct dpu_hw_intf *intf,
|
|
const struct intf_prog_fetch *fetch)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &intf->hw;
|
|
int fetch_enable;
|
|
|
|
/*
|
|
* Fetch should always be outside the active lines. If the fetching
|
|
* is programmed within active region, hardware behavior is unknown.
|
|
*/
|
|
|
|
fetch_enable = DPU_REG_READ(c, INTF_CONFIG);
|
|
if (fetch->enable) {
|
|
fetch_enable |= BIT(31);
|
|
DPU_REG_WRITE(c, INTF_PROG_FETCH_START,
|
|
fetch->fetch_start);
|
|
} else {
|
|
fetch_enable &= ~BIT(31);
|
|
}
|
|
|
|
DPU_REG_WRITE(c, INTF_CONFIG, fetch_enable);
|
|
}
|
|
|
|
static void dpu_hw_intf_get_status(
|
|
struct dpu_hw_intf *intf,
|
|
struct intf_status *s)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &intf->hw;
|
|
|
|
s->is_en = DPU_REG_READ(c, INTF_TIMING_ENGINE_EN);
|
|
if (s->is_en) {
|
|
s->frame_count = DPU_REG_READ(c, INTF_FRAME_COUNT);
|
|
s->line_count = DPU_REG_READ(c, INTF_LINE_COUNT);
|
|
} else {
|
|
s->line_count = 0;
|
|
s->frame_count = 0;
|
|
}
|
|
}
|
|
|
|
static void dpu_hw_intf_setup_misr(struct dpu_hw_intf *intf,
|
|
bool enable, u32 frame_count)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &intf->hw;
|
|
u32 config = 0;
|
|
|
|
DPU_REG_WRITE(c, INTF_MISR_CTRL, MISR_CTRL_STATUS_CLEAR);
|
|
/* clear misr data */
|
|
wmb();
|
|
|
|
if (enable)
|
|
config = (frame_count & MISR_FRAME_COUNT_MASK) |
|
|
MISR_CTRL_ENABLE | INTF_MISR_CTRL_FREE_RUN_MASK;
|
|
|
|
DPU_REG_WRITE(c, INTF_MISR_CTRL, config);
|
|
}
|
|
|
|
static u32 dpu_hw_intf_collect_misr(struct dpu_hw_intf *intf)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c = &intf->hw;
|
|
|
|
return DPU_REG_READ(c, INTF_MISR_SIGNATURE);
|
|
}
|
|
|
|
static u32 dpu_hw_intf_get_line_count(struct dpu_hw_intf *intf)
|
|
{
|
|
struct dpu_hw_blk_reg_map *c;
|
|
|
|
if (!intf)
|
|
return 0;
|
|
|
|
c = &intf->hw;
|
|
|
|
return DPU_REG_READ(c, INTF_LINE_COUNT);
|
|
}
|
|
|
|
static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
|
|
unsigned long cap)
|
|
{
|
|
ops->setup_timing_gen = dpu_hw_intf_setup_timing_engine;
|
|
ops->setup_prg_fetch = dpu_hw_intf_setup_prg_fetch;
|
|
ops->get_status = dpu_hw_intf_get_status;
|
|
ops->enable_timing = dpu_hw_intf_enable_timing_engine;
|
|
ops->setup_misr = dpu_hw_intf_setup_misr;
|
|
ops->collect_misr = dpu_hw_intf_collect_misr;
|
|
ops->get_line_count = dpu_hw_intf_get_line_count;
|
|
}
|
|
|
|
static struct dpu_hw_blk_ops dpu_hw_ops = {
|
|
.start = NULL,
|
|
.stop = NULL,
|
|
};
|
|
|
|
struct dpu_hw_intf *dpu_hw_intf_init(enum dpu_intf idx,
|
|
void __iomem *addr,
|
|
struct dpu_mdss_cfg *m)
|
|
{
|
|
struct dpu_hw_intf *c;
|
|
struct dpu_intf_cfg *cfg;
|
|
int rc;
|
|
|
|
c = kzalloc(sizeof(*c), GFP_KERNEL);
|
|
if (!c)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
cfg = _intf_offset(idx, m, addr, &c->hw);
|
|
if (IS_ERR_OR_NULL(cfg)) {
|
|
kfree(c);
|
|
pr_err("failed to create dpu_hw_intf %d\n", idx);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Assign ops
|
|
*/
|
|
c->idx = idx;
|
|
c->cap = cfg;
|
|
c->mdss = m;
|
|
_setup_intf_ops(&c->ops, c->cap->features);
|
|
|
|
rc = dpu_hw_blk_init(&c->base, DPU_HW_BLK_INTF, idx, &dpu_hw_ops);
|
|
if (rc) {
|
|
DPU_ERROR("failed to init hw blk %d\n", rc);
|
|
goto blk_init_error;
|
|
}
|
|
|
|
return c;
|
|
|
|
blk_init_error:
|
|
kzfree(c);
|
|
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
void dpu_hw_intf_destroy(struct dpu_hw_intf *intf)
|
|
{
|
|
if (intf)
|
|
dpu_hw_blk_destroy(&intf->base);
|
|
kfree(intf);
|
|
}
|
|
|