forked from Minki/linux
ed5dc2372d
Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.13 (GNU/Linux) iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/ DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/ ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4 yRwz6eeO3gBMZ+v2humV =dYdW -----END PGP SIGNATURE----- Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.9: Core: - Support for packed commands in eMMC 4.5. (This requires a host capability to be turned on. It increases write throughput by 20%+, but may also increase average write latency; more testing needed.) - Add DT bindings for capability flags. - Add mmc_of_parse() for shared DT parsing between drivers. Drivers: - android-goldfish: New MMC driver for the Android Goldfish emulator. - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection. - omap_hsmmc: Fix boot hangs with RPMB partitions. - sdhci-bcm2835: New driver for controller used by Raspberry Pi. - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio. - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs. - tmio_mmc: Add DT bindings, support for vccq regulator" * tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits) mmc: tegra: assume CONFIG_OF, remove platform data mmc: add DT bindings for more MMC capability flags mmc: tmio: add support for the VccQ regulator mmc: tmio: remove unused and deprecated symbols mmc: sh_mobile_sdhi: use managed resource allocations mmc: sh_mobile_sdhi: remove unused .pdata field mmc: tmio-mmc: parse device-tree bindings mmc: tmio-mmc: define device-tree bindings mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings mmc: (cosmetic) remove "extern" from function declarations mmc: provide a standard MMC device-tree binding parser centrally mmc: detailed definition of CD and WP MMC line polarities in DT mmc: sdhi, tmio: only check flags in tmio-mmc driver proper mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch() mmc: sdhci: check voltage range only on regulators aware of voltage value mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK mmc: support packed write command for eMMC4.5 devices mmc: add packed command feature of eMMC4.5 mmc: rtsx: remove driving adjustment mmc: use regulator_can_change_voltage() instead of regulator_count_voltages ...
235 lines
4.2 KiB
Plaintext
235 lines
4.2 KiB
Plaintext
/*
|
|
* SAMSUNG SMDK5250 board device tree source
|
|
*
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
/include/ "exynos5250.dtsi"
|
|
|
|
/ {
|
|
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
|
|
compatible = "samsung,smdk5250", "samsung,exynos5250";
|
|
|
|
aliases {
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x80000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
|
|
};
|
|
|
|
i2c@12C60000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
gpios = <&gpb3 0 2 3 0>,
|
|
<&gpb3 1 2 3 0>;
|
|
|
|
eeprom@50 {
|
|
compatible = "samsung,s524ad0xd1";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@12C70000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
gpios = <&gpb3 2 2 3 0>,
|
|
<&gpb3 3 2 3 0>;
|
|
|
|
eeprom@51 {
|
|
compatible = "samsung,s524ad0xd1";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
wm8994: wm8994@1a {
|
|
compatible = "wlf,wm8994";
|
|
reg = <0x1a>;
|
|
};
|
|
};
|
|
|
|
i2c@121D0000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <40000>;
|
|
samsung,i2c-slave-addr = <0x38>;
|
|
|
|
sata-phy {
|
|
compatible = "samsung,sata-phy";
|
|
reg = <0x38>;
|
|
};
|
|
};
|
|
|
|
sata@122F0000 {
|
|
samsung,sata-freq = <66>;
|
|
};
|
|
|
|
i2c@12C80000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
gpios = <&gpa0 6 3 3 0>,
|
|
<&gpa0 7 3 3 0>;
|
|
|
|
hdmiddc@50 {
|
|
compatible = "samsung,exynos5-hdmiddc";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@12C90000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12CA0000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12CB0000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12CC0000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12CD0000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@12CE0000 {
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <66000>;
|
|
|
|
hdmiphy@38 {
|
|
compatible = "samsung,exynos5-hdmiphy";
|
|
reg = <0x38>;
|
|
};
|
|
};
|
|
|
|
dwmmc0@12200000 {
|
|
num-slots = <1>;
|
|
supports-highspeed;
|
|
broken-cd;
|
|
fifo-depth = <0x80>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
slot@0 {
|
|
reg = <0>;
|
|
bus-width = <8>;
|
|
gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
|
|
<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
|
|
<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
|
|
<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
|
|
<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
|
|
};
|
|
};
|
|
|
|
dwmmc1@12210000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
dwmmc2@12220000 {
|
|
num-slots = <1>;
|
|
supports-highspeed;
|
|
fifo-depth = <0x80>;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
slot@0 {
|
|
reg = <0>;
|
|
bus-width = <4>;
|
|
samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
|
|
disable-wp;
|
|
gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
|
|
<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
|
|
<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
|
|
<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
|
|
<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
|
|
};
|
|
};
|
|
|
|
dwmmc3@12230000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@12d20000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@12d30000 {
|
|
gpios = <&gpa2 4 2 3 0>,
|
|
<&gpa2 6 2 3 0>,
|
|
<&gpa2 7 2 3 0>;
|
|
|
|
w25q80bw@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "w25x80";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
|
|
controller-data {
|
|
cs-gpio = <&gpa2 5 1 0 3>;
|
|
samsung,spi-feedback-delay = <0>;
|
|
};
|
|
|
|
partition@0 {
|
|
label = "U-Boot";
|
|
reg = <0x0 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "Kernel";
|
|
reg = <0x40000 0xc0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
spi_2: spi@12d40000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi {
|
|
hpd-gpio = <&gpx3 7 0xf 1 3>;
|
|
};
|
|
|
|
codec@11000000 {
|
|
samsung,mfc-r = <0x43000000 0x800000>;
|
|
samsung,mfc-l = <0x51000000 0x800000>;
|
|
};
|
|
|
|
i2s0: i2s@03830000 {
|
|
gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
|
|
<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
|
|
<&gpz 6 2 0 0>;
|
|
};
|
|
|
|
i2s1: i2s@12D60000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
i2s2: i2s@12D70000 {
|
|
status = "disabled";
|
|
};
|
|
|
|
sound {
|
|
compatible = "samsung,smdk-wm8994";
|
|
|
|
samsung,i2s-controller = <&i2s0>;
|
|
samsung,audio-codec = <&wm8994>;
|
|
};
|
|
};
|