..
testcases
aks-cdu.dts
ARM: at91: Add support for board aks-cdu
2012-07-09 20:45:31 +02:00
am33xx.dtsi
ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
2013-02-08 07:26:15 -07:00
am335x-bone.dts
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
2012-12-12 18:07:07 -08:00
am335x-evm.dts
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
2012-12-12 18:07:07 -08:00
am335x-evmsk.dts
ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk
2012-11-06 15:45:53 +01:00
am3517_mt_ventoux.dts
am3517-evm.dts
arm/dts: Add support for TI AM3517/05 EVM board
2012-07-02 01:27:44 -07:00
animeo_ip.dts
ARM: at91: Animeo IP: enable watchdog support
2013-02-07 16:40:07 +01:00
armada-370-db.dts
arm: mvebu: Add SPI flash on Armada 370 DB board
2013-02-28 18:57:15 +01:00
armada-370-mirabox.dts
arm: mvebu: Enable USB controllers on Armada 370/XP boards
2013-02-28 18:57:13 +01:00
armada-370-rd.dts
arm: mvebu: enable the SD card slot on Armada 370 Reference Design board
2013-02-28 18:57:16 +01:00
armada-370-xp.dtsi
arm: mvebu: Add support for SPI controller in Armada 370/XP
2013-02-28 18:57:14 +01:00
armada-370.dtsi
arm: mvebu: Add support for USB host controllers in Armada 370/XP
2013-02-28 18:57:13 +01:00
armada-xp-db.dts
arm: mvebu: Add SPI flash on Armada XP-DB board
2013-02-28 18:57:15 +01:00
armada-xp-gp.dts
arm: mvebu: Add SPI flash on Armada XP-GP board
2013-02-28 18:57:14 +01:00
armada-xp-mv78230.dtsi
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
2013-02-28 18:57:09 +01:00
armada-xp-mv78260.dtsi
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
2013-02-28 18:57:09 +01:00
armada-xp-mv78460.dtsi
arm: mvebu: add pin muxing options for the SDIO interface on Armada XP
2013-02-28 18:57:09 +01:00
armada-xp-openblocks-ax3-4.dts
arm: mvebu: Enable USB controllers on Armada 370/XP boards
2013-02-28 18:57:13 +01:00
armada-xp.dtsi
arm: mvebu: Add support for USB host controllers in Armada 370/XP
2013-02-28 18:57:13 +01:00
at91rm9200.dtsi
ARM: at91: add EMAC bindings to RM9200 DT
2013-02-07 16:40:09 +01:00
at91rm9200ek.dts
ARM: at91: add EMAC bindings to RM9200 DT
2013-02-07 16:40:09 +01:00
at91sam9g15.dtsi
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g15ek.dts
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g20.dtsi
ARM: dts: add twi nodes for atmel SoCs
2012-09-12 14:49:16 +02:00
at91sam9g20ek_2mmc.dts
ARM: at91: dt: add mmc pinctrl for Atmel reference boards
2012-11-20 01:10:27 +08:00
at91sam9g20ek_common.dtsi
Sound updates for 3.8-rc1
2012-12-13 11:51:23 -08:00
at91sam9g20ek.dts
ARM: at91: add at91sam9g20ek boards dt support
2012-04-20 23:17:05 +08:00
at91sam9g25.dtsi
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g25ek.dts
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g35.dtsi
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g35ek.dts
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9g45.dtsi
ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-12 00:00:23 +00:00
at91sam9m10g45ek.dts
ARM: at91: dt: add mmc pinctrl for Atmel reference boards
2012-11-20 01:10:27 +08:00
at91sam9n12.dtsi
arm-soc: device tree conversions
2013-02-21 15:38:49 -08:00
at91sam9n12ek.dts
ARM: at91: at91sam9n12: add DT parameters to enable PMECC
2013-02-07 16:45:06 +01:00
at91sam9x5.dtsi
arm-soc: device tree conversions
2013-02-21 15:38:49 -08:00
at91sam9x5cm.dtsi
ARM: at91: at91sam9x5: add DT parameters to enable PMECC
2013-02-07 16:45:05 +01:00
at91sam9x5ek.dtsi
ARM: at91: dt: add mmc pinctrl for Atmel reference boards
2012-11-20 01:10:27 +08:00
at91sam9x25.dtsi
ARM: at91sam9: add macb pinctrl support
2012-11-19 06:54:25 +08:00
at91sam9x25ek.dts
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9x35.dtsi
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9x35ek.dts
arm: at91: dt: at91sam9 add serial pinctrl support
2012-10-13 09:21:44 +08:00
at91sam9260.dtsi
ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-12 00:00:23 +00:00
at91sam9263.dtsi
ARM: at91/dts: add pinctrl support for SSC peripheral
2013-01-12 00:00:23 +00:00
at91sam9263ek.dts
ARM: at91: dt: add mmc pinctrl for Atmel reference boards
2012-11-20 01:10:27 +08:00
bcm2835-rpi-b.dts
ARM: bcm2835: add I2C controllers to DT
2013-01-14 21:47:09 -07:00
bcm2835.dtsi
ARM: bcm2835: fix clock node aliasing in device tree
2013-01-14 21:47:09 -07:00
bcm11351-brt.dts
Add support for generic BCM SoC chipsets
2012-11-19 22:39:07 -08:00
bcm11351.dtsi
Add support for generic BCM SoC chipsets
2012-11-19 22:39:07 -08:00
ccu9540.dts
ARM: ux500: List DT compatibility using platform names rather than by board
2012-11-01 13:02:25 +01:00
cros5250-common.dtsi
ARM: dts: correct the dw-mshc timing properties as per binding
2013-01-16 15:45:52 -08:00
da850-enbw-cmc.dts
ARM: davinci: add support for am1808 based EnBW CMC board
2012-10-29 15:43:43 +05:30
da850-evm.dts
ARM: davinci: da850: add wdt DT node
2013-02-09 22:38:26 +05:30
da850.dtsi
ARM: davinci: da850: add wdt DT node
2013-02-09 22:38:26 +05:30
dbx5x0.dtsi
ARM: ux500: correct typo in pinctrl Device Tree node
2013-01-30 19:10:07 +01:00
dove-cm-a510.dts
ARM: dove: add device tree descriptors
2012-09-21 17:07:24 +00:00
dove-cubox.dts
ARM: Dove: add fixed regulator for CuBox USB power
2013-02-28 18:57:12 +01:00
dove-dove-db.dts
ARM: dove: add device tree descriptors
2012-09-21 17:07:24 +00:00
dove.dtsi
ARM: dove: convert serial DT nodes to clocks property
2013-02-28 18:57:15 +01:00
ea3250.dts
ARM: LPC32xx: Extend dts for EA3250 board
2012-09-06 11:40:48 +02:00
ecx-2000.dts
ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
2013-01-07 21:08:23 -08:00
ecx-common.dtsi
ARM: dts: Add Calxeda ECX-2000 support
2012-10-31 13:46:17 -05:00
elpida_ecb240abacn.dtsi
ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards
2012-09-07 19:18:40 +02:00
emev2-kzm9d.dts
ARM: mach-shmobile: kzm9d: update defconfig
2013-01-15 08:57:09 +09:00
emev2.dtsi
ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus
2013-01-29 11:44:59 +09:00
ethernut5.dts
Ethernut 5 board support
2012-04-27 23:23:22 +08:00
evk-pro3.dts
ARM: at91/dts: evk-pro3: enable watchdog
2012-11-16 15:48:48 +01:00
exynos4.dtsi
ARM: arm-soc: device tree conversions and enablement
2012-12-13 10:39:26 -08:00
exynos4x12-pinctrl.dtsi
ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
2013-02-12 10:35:50 -08:00
exynos4x12.dtsi
ARM: dts: fix compatible value for exynos pinctrl
2013-01-28 14:27:50 -08:00
exynos4210-origen.dts
ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen
2012-11-22 00:38:56 +09:00
exynos4210-pinctrl.dtsi
ARM: dts: Use drive strength 3 for SD pins for exynos4
2012-11-22 00:39:01 +09:00
exynos4210-smdkv310.dts
ARM: dts: use uart port1 for console on exynos4210-smdkv310
2012-12-28 09:35:35 -08:00
exynos4210-trats.dts
ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats
2012-11-20 20:17:20 +09:00
exynos4210.dtsi
ARM: dts: fix compatible value for exynos pinctrl
2013-01-28 14:27:50 -08:00
exynos4212.dtsi
ARM: dts: Add support for EXYNOS4X12 SoCs
2012-11-07 08:52:25 +09:00
exynos4412-smdk4412.dts
ARM: dts: add board dts file for EXYNOS4412 based SMDK board
2012-11-07 09:12:10 +09:00
exynos4412.dtsi
ARM: dts: Add support for EXYNOS4X12 SoCs
2012-11-07 08:52:25 +09:00
exynos5250-smdk5250.dts
MMC highlights for 3.9:
2013-02-26 09:31:09 -08:00
exynos5250-snow.dts
ARM: dts: Add board dts file for Snow board (ARM Chromebook)
2012-11-21 13:32:21 +09:00
exynos5250.dtsi
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
2013-02-26 09:24:48 -08:00
exynos5440-ssdk5440.dts
ARM: dts: use uart port0 for console on exynos5440-ssdk5440
2012-12-28 09:35:14 -08:00
exynos5440.dtsi
ARM: dts: fix tick and alarm irq numbers for exynos5440
2013-01-28 14:27:50 -08:00
ge863-pro3.dtsi
ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3
2012-07-09 20:22:00 +02:00
highbank.dts
cpufreq / highbank: add support for highbank cpufreq
2013-02-02 00:01:15 +01:00
href.dtsi
ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF
2012-11-01 12:59:32 +01:00
hrefprev60.dts
ARM: ux500: Move board specific GPIO info out to subordinate DTS files
2012-11-27 10:58:27 +00:00
hrefv60plus.dts
ARM: ux500: Add SDI (MMC) support to the HREF Device Tree
2012-11-20 16:10:43 +00:00
imx6dl.dtsi
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6q-arm2.dts
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6q-sabreauto.dts
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6q-sabrelite.dts
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6q-sabresd.dts
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6q.dtsi
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx6qdl.dtsi
ARM: dts: add dtsi for imx6q and imx6dl
2013-02-10 23:25:47 +08:00
imx23-evk.dts
ARM: mxs: Let mmc0 pin detect be generic
2012-08-23 10:01:30 +08:00
imx23-olinuxino.dts
ARM: dts: imx23-olinuxino: Fix IOMUX settings
2012-12-25 22:17:59 +08:00
imx23-stmp378x_devb.dts
ARM: mxs: Rename 'hog-gpios'
2012-08-23 10:01:11 +08:00
imx23.dtsi
ARM: mxs: Add OF props for MX23 LRADC
2013-01-26 10:07:54 +00:00
imx25-karo-tx25.dts
ARM: dts: imx25-karo-tx25: Put status entry in the end
2013-02-10 23:25:43 +08:00
imx25-pdk.dts
ARM: mx25pdk: Add device tree support
2013-02-10 23:25:42 +08:00
imx25.dtsi
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx27-apf27.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx27-pdk.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx27-phytec-phycore.dts
ARM: dts: mx27: Fix the AIPI bus for FEC
2012-12-17 10:49:41 +01:00
imx27.dtsi
ARM: dts: mx27: Fix the AIPI bus for FEC
2012-12-17 10:49:41 +01:00
imx28-apf28.dts
ARM: mxs: Add support for the Armadeus Systems APF28 module
2012-10-19 16:45:20 +08:00
imx28-apf28dev.dts
ARM: mxs: apf28dev: Add I2C and SPI support
2012-11-12 10:07:43 +08:00
imx28-apx4devkit.dts
ARM: mxs: Rename 'hog-gpios'
2012-08-23 10:01:11 +08:00
imx28-cfa10036.dts
ARM: dts: mxs: add oled support for the cfa-10036
2012-11-22 09:03:40 +08:00
imx28-cfa10037.dts
ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support
2013-01-26 13:40:37 +08:00
imx28-cfa10049.dts
ARM: mxs: dts: Add rotary encoder to the CFA-10049
2013-01-31 22:31:19 +08:00
imx28-evk.dts
ARM: dts: imx28-evk: Use pinctrl for gpio-led
2012-10-15 10:51:48 +08:00
imx28-m28evk.dts
ARM: mxs: Enable touchscreen on m28evk
2013-01-14 08:47:51 +08:00
imx28-sps1.dts
ARM: mxs: Add SchulerControl SPS1 DTS file
2012-11-20 22:09:05 +08:00
imx28-tx28.dts
ARM: mxs: Rename 'hog-gpios'
2012-08-23 10:01:11 +08:00
imx28.dtsi
ARM: dts: mxs: Add muxing options for the third PWM
2013-01-29 18:23:18 +08:00
imx31-bug.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx31.dtsi
ARM: mx31: Replace clk_register_clkdev with clock DT lookup
2013-01-25 11:12:37 +01:00
imx51-apf51.dts
ARM: dts: Add apf51 basic support
2013-02-10 23:25:45 +08:00
imx51-babbage.dts
ARM i.MX51 babbage: Add keypad support
2013-02-10 23:25:43 +08:00
imx51.dtsi
ARM: dts: Add apf51 basic support
2013-02-10 23:25:45 +08:00
imx53-ard.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx53-evk.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx53-mba53.dts
ARM i.MX53: dts: add oftree for MBa53 baseboard
2013-02-10 23:25:44 +08:00
imx53-qsb.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx53-smd.dts
ARM: dts: imx: use nodes label in board dts
2013-02-10 23:25:42 +08:00
imx53-tqma53.dtsi
ARM i.MX53: add dts for the TQ tqma53 module
2013-02-10 23:25:44 +08:00
imx53.dtsi
ARM: dts: Add device tree entry for onewire master on i.MX53
2013-02-10 23:25:47 +08:00
integrator.dtsi
ARM: 7519/1: integrator: convert platform devices to Device Tree
2012-09-17 23:20:23 +01:00
integratorap.dts
ARM: integrator: hook the AP into the SoC bus
2012-11-16 22:25:50 +01:00
integratorcp.dts
ARM: integrator: hook the CP into the SoC bus
2012-11-16 22:26:07 +01:00
kirkwood-98dx4122.dtsi
ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
2012-11-24 02:58:43 +00:00
kirkwood-6281.dtsi
ARM: kirkwood: Convert mplcec4 board to pinctrl
2012-11-24 02:58:52 +00:00
kirkwood-6282.dtsi
ARM: Kirkwood: Add pinctrl of NAND to 88f6282
2013-02-28 18:57:11 +01:00
kirkwood-dns320.dts
ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
2012-07-27 16:49:53 +02:00
kirkwood-dns325.dts
ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
2012-07-27 16:49:53 +02:00
kirkwood-dnskw.dtsi
ARM: Kirkwood: Convert dnskw to pinctrl
2012-11-24 02:57:56 +00:00
kirkwood-dockstar.dts
ARM: Kirkwood: Convert dockstar to pinctrl.
2012-11-24 02:58:05 +00:00
kirkwood-dreamplug.dts
arm: kirkwood: dreamplug: use Device Tree to probe SDIO
2013-02-28 18:57:10 +01:00
kirkwood-goflexnet.dts
ARM: Kirkwood: Convert GoFlex Net to pinctrl.
2012-11-24 02:58:18 +00:00
kirkwood-guruplug-server-plus.dts
ARM: kirkwood: convert Guruplug Server Plus to use the device tree
2013-02-28 18:57:07 +01:00
kirkwood-ib62x0.dts
ARM: Kirkwood: Convert ib62x0 to pinctrl.
2012-11-24 02:58:25 +00:00
kirkwood-iconnect.dts
ARM: Kirkwood: Convert iConnect to pinctrl.
2012-11-24 02:57:47 +00:00
kirkwood-iomega_ix2_200.dts
ARM: Kirkwood: Convert IX2-200 to pinctrl.
2012-11-24 02:58:36 +00:00
kirkwood-is2.dts
ARM: kirkwood: DT board setup for Network Space v2 and parents
2012-11-21 20:58:35 +00:00
kirkwood-km_kirkwood.dts
ARM: Kirkwood: Convert km_kirkwood to pinctrl
2012-11-24 02:58:48 +00:00
kirkwood-lschlv2.dts
ARM: Kirkwood: Replace mrvl with marvell
2012-07-27 16:50:57 +02:00
kirkwood-lsxhl.dts
ARM: Kirkwood: Replace mrvl with marvell
2012-07-27 16:50:57 +02:00
kirkwood-lsxl.dtsi
ARM: Kirkwood: Convert lsxl boards to pinctrl.
2012-11-24 02:58:30 +00:00
kirkwood-mplcec4.dts
arm: kirkwood: mplcec4: use Device Tree to probe SDIO
2013-02-28 18:57:11 +01:00
kirkwood-ns2-common.dtsi
ARM: Kirkwood: Convert NS2 to gpio-poweroff.
2013-02-28 18:57:13 +01:00
kirkwood-ns2.dts
ARM: kirkwood: DT board setup for Network Space v2 and parents
2012-11-21 20:58:35 +00:00
kirkwood-ns2lite.dts
ARM: kirkwood: DT board setup for Network Space Lite v2
2012-11-21 20:58:43 +00:00
kirkwood-ns2max.dts
ARM: kirkwood: DT board setup for Network Space v2 and parents
2012-11-21 20:58:35 +00:00
kirkwood-ns2mini.dts
ARM: kirkwood: DT board setup for Network Space Mini v2
2012-11-21 20:58:49 +00:00
kirkwood-nsa310.dts
ARM: kirkwood: nsa310: convert to pinctrl
2013-02-28 18:57:16 +01:00
kirkwood-openblocks_a6.dts
ARM: Kirkwood: Convert openblocks A6 board to pinctrl
2013-02-28 18:57:11 +01:00
kirkwood-topkick.dts
ARM: kirkwood: topkick: init mvsdio via DT
2013-02-28 18:57:16 +01:00
kirkwood-ts219-6281.dts
ARM: Kirkwood: Convert TS219 to pinctrl.
2012-11-24 02:57:43 +00:00
kirkwood-ts219-6282.dts
ARM: Kirkwood: Convert TS219 to pinctrl.
2012-11-24 02:57:43 +00:00
kirkwood-ts219.dtsi
ARM: Kirkwood: Replace mrvl with marvell
2012-07-27 16:50:57 +02:00
kirkwood.dtsi
arm: kirkwood: add Device Tree informations for the SDIO controller
2013-02-28 18:57:10 +01:00
kizbox.dts
ARM: at91/dts: add macb mii pinctrl config for kizbox
2013-01-23 10:34:38 +01:00
lpc32xx.dtsi
ARM: LPC32xx: Add the motor PWM to base dts file
2012-11-14 15:41:18 +01:00
Makefile
arm-soc: mvebu platform changes
2013-02-28 20:09:24 -08:00
marco-evb.dts
ARM: PRIMA2: add CSR SiRFmarco device tree .dts
2013-01-22 19:33:30 +08:00
marco.dtsi
ARM: PRIMA2: add CSR SiRFmarco device tree .dts
2013-01-22 19:33:30 +08:00
mmp2-brownstone.dts
mfd: max8925: Add dts
2013-02-14 00:23:01 +01:00
mmp2.dtsi
mfd: max8925: Add dts
2013-02-14 00:23:01 +01:00
msm8660-surf.dts
ARM: msm: Move 8660 to DT timer
2012-09-13 11:14:54 -07:00
msm8960-cdp.dts
ARM: msm: Add DT support for 8960
2012-09-13 11:16:47 -07:00
omap2.dtsi
ARM: dts: OMAP: Add timer nodes
2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts
ARM: dts: Add omap3-beagle.dts
2012-10-29 16:56:24 +01:00
omap3-beagle.dts
ARM: dts: Add omap3-beagle.dts
2012-10-29 16:56:24 +01:00
omap3-evm.dts
ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM
2012-09-07 19:22:44 +02:00
omap3-overo.dtsi
ARM: dts: omap3-overo: Add support for the blue LED
2012-09-10 15:44:45 +02:00
omap3-tobi.dts
ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board
2012-09-10 12:07:22 +02:00
omap3.dtsi
ARM: dts: OMAP: Add counter-32k nodes
2012-10-29 16:56:33 +01:00
omap4-panda-a4.dts
ARM: dts: omap4-panda: Add pinmux configuration for HDMI
2012-11-07 11:50:28 +01:00
omap4-panda-es.dts
ARM: dts: omap4-panda: Add pinmux configuration for HDMI
2012-11-07 11:50:28 +01:00
omap4-panda.dts
ARM: dts: omap4-panda: Add pinmux configuration for HDMI
2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts
ARM: dts: omap4-sdp: Add pinmux configuration for HDMI
2012-11-07 11:50:29 +01:00
omap4-sdp.dts
ARM: dts: omap4-sdp: Add pinmux configuration for HDMI
2012-11-07 11:50:29 +01:00
omap4-var-som.dts
ARM: dts: OMAP: Rename pandaES and var_som for consistency
2012-10-29 16:56:35 +01:00
omap4.dtsi
ARM: dts: OMAP4: Update timer addresses
2012-11-01 17:03:31 +01:00
omap5-evm.dts
ARM: dts: omap5-evm: LPDDR2 memory device details for EVM
2012-11-05 18:38:27 +01:00
omap5.dtsi
ARM: dts: omap5: EMIF device tree data for OMAP5 boards
2012-11-05 18:38:03 +01:00
omap36xx.dtsi
arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm
2012-09-10 10:34:51 -07:00
omap2420-h4.dts
ARM: dts: OMAP2420: Correct H4 board memory size
2012-12-14 14:49:53 -08:00
omap2420.dtsi
ARM: dts: OMAP: Add counter-32k nodes
2012-10-29 16:56:33 +01:00
omap2430.dtsi
ARM: dts: OMAP: Add counter-32k nodes
2012-10-29 16:56:33 +01:00
orion5x-lacie-ethernet-disk-mini-v2.dts
arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree
2012-11-21 21:00:51 +00:00
orion5x.dtsi
arm: orion5x: basic Device Tree support
2012-11-21 21:00:45 +00:00
phy3250.dts
ARM: LPC32xx: LED fix in PHY3250 DTS file
2012-09-25 10:11:41 +02:00
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts
ARM: at91: pm9g45: add mmc support
2012-11-20 01:10:28 +08:00
prima2-evb.dts
pinctrl: sirf: add DT-binding pinmux mapping support
2012-09-05 14:48:10 +08:00
prima2.dtsi
clk: prima2: enable dt-binding clkdev mapping
2013-01-18 09:44:01 -08:00
pxa2xx.dtsi
ARM: pxa: add .dtsi files
2012-08-16 16:15:25 +08:00
pxa3xx.dtsi
ARM: pxa: add .dtsi files
2012-08-16 16:15:25 +08:00
pxa27x.dtsi
ARM: pxa: add .dtsi files
2012-08-16 16:15:25 +08:00
pxa168-aspenite.dts
pxa168.dtsi
ARM: dts: refresh dts file for arch mmp
2012-05-05 16:39:29 +08:00
pxa910-dkb.dts
ARM: dts: Enable 88pm860x pmic
2012-10-02 11:43:17 +02:00
pxa910.dtsi
MFD bits for the 3.7 merge window.
2012-10-05 12:01:30 +09:00
r8a7740-armadillo800eva.dts
Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
2013-01-29 09:02:47 -08:00
r8a7740.dtsi
ARM: mach-shmobile: r8a7740 generic board support via DT
2012-07-06 21:03:35 +02:00
r8a7779.dtsi
ARM: shmobile: r8a7779: add Thermal support on DT
2013-03-13 02:13:22 +09:00
samsung_k3pe0e000b.dtsi
ARM: dts: omap5-evm: LPDDR2 memory device details for EVM
2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts
Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
2013-01-29 09:02:47 -08:00
sh73a0-reference.dtsi
ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT
2013-01-25 12:43:49 +09:00
sh73a0.dtsi
ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus
2013-01-29 11:44:54 +09:00
sh7372-mackerel.dts
Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
2013-01-29 09:02:47 -08:00
sh7372.dtsi
ARM: mach-shmobile: sh7372 generic board support via DT V2
2012-04-11 12:19:31 +02:00
skeleton.dtsi
snowball.dts
ARM: arm-soc: device tree conversions and enablement
2012-12-13 10:39:26 -08:00
socfpga_cyclone5.dts
arm: socfpga: Add SMP support for actual socfpga harware
2013-02-11 19:37:26 -08:00
socfpga_vt.dts
arm: socfpga: Add SMP support for actual socfpga harware
2013-02-11 19:37:26 -08:00
socfpga.dtsi
arm: socfpga: Add new device tree source for actual socfpga HW
2013-02-11 19:37:19 -08:00
spear3xx.dtsi
ARM: SPEAr: DT: Update device nodes
2012-11-26 16:55:28 +05:30
spear13xx.dtsi
Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
2013-02-20 15:48:02 +05:30
spear300-evb.dts
ARM: SPEAr: DT: add uart state to fix warning
2012-11-26 15:53:52 +05:30
spear300.dtsi
MTD pull for 3.8
2012-12-19 12:47:41 -08:00
spear310-evb.dts
ARM: SPEAr: DT: add uart state to fix warning
2012-11-26 15:53:52 +05:30
spear310.dtsi
MTD pull for 3.8
2012-12-19 12:47:41 -08:00
spear320-evb.dts
ARM: SPEAr: DT: add uart state to fix warning
2012-11-26 15:53:52 +05:30
spear320-hmi.dts
ARM: SPEAr320: DT: Add SPEAr 320 HMI board support
2012-11-26 16:55:33 +05:30
spear320.dtsi
MTD pull for 3.8
2012-12-19 12:47:41 -08:00
spear600-evb.dts
ARM: SPEAr: DT: Update device nodes
2012-11-26 16:55:28 +05:30
spear600.dtsi
MTD pull for 3.8
2012-12-19 12:47:41 -08:00
spear1310-evb.dts
ARM: SPEAr: DT: Update device nodes
2012-11-26 16:55:28 +05:30
spear1310.dtsi
ARM: SPEAr: DT: Update device nodes
2012-11-26 16:55:28 +05:30
spear1340-evb.dts
ARM: SPEAr: DT: Update device nodes
2012-11-26 16:55:28 +05:30
spear1340.dtsi
Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
2013-02-20 15:48:02 +05:30
ste-nomadik-s8815.dts
ARM: nomadik: migrate MMC/SD card support to device tree
2013-01-28 23:24:40 +01:00
ste-nomadik-stn8815.dtsi
ARM: nomadik: add I2C devices to the device tree
2013-01-28 23:24:41 +01:00
stuib.dtsi
ARM: ux500: Change the type of interrupt to something compatible
2012-11-01 13:02:26 +01:00
sun4i-a10-cubieboard.dts
Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
2013-02-19 22:27:28 +01:00
sun4i-a10-hackberry.dts
ARM: sunxi: Add device tree for Miniand Hackberry
2013-01-08 19:46:19 +01:00
sun4i-a10.dtsi
ARM: sunxi: Add the pin groups for UART0 and UART1 on sun4i
2013-02-01 10:48:11 +01:00
sun5i-a13-olinuxino.dts
Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
2013-02-19 22:26:42 +01:00
sun5i-a13.dtsi
ARM: sunxi: Add uart1 pinctrl groups
2013-01-22 13:51:37 +01:00
sunxi.dtsi
ARM: sunxi: Use the Synosys APB UART instead of ns8250
2013-01-16 19:13:18 +01:00
tegra20-colibri-512.dtsi
ARM: tegra: Add Colibri T20 512MB COM device tree
2013-01-28 11:24:09 -07:00
tegra20-harmony.dts
ARM: tegra: device tree updates
2013-02-05 13:19:11 -08:00
tegra20-iris-512.dts
ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM
2013-01-28 11:24:09 -07:00
tegra20-medcom-wide.dts
ARM: tegra: Add Avionic Design Medcom-Wide support
2012-09-20 09:34:00 -06:00
tegra20-paz00.dts
ARM: tegra: device tree updates
2013-02-05 13:19:11 -08:00
tegra20-plutux.dts
ARM: tegra: plutux: Enable HDMI output
2012-11-16 09:17:08 -07:00
tegra20-seaboard.dts
ARM: tegra: device tree updates
2013-02-05 13:19:11 -08:00
tegra20-tamonten.dtsi
ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi
2013-01-28 11:24:09 -07:00
tegra20-tec.dts
ARM: tegra: tec: Enable HDMI output
2012-11-16 09:17:09 -07:00
tegra20-trimslice.dts
ARM: tegra: device tree updates
2013-02-05 13:19:11 -08:00
tegra20-ventana.dts
ARM: tegra: device tree updates
2013-02-05 13:19:11 -08:00
tegra20-whistler.dts
ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi
2013-01-28 11:24:09 -07:00
tegra20.dtsi
ARM: tegra: remove clock-frequency properties from serial nodes
2013-02-13 11:17:02 -07:00
tegra30-beaver.dts
ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi
2013-01-28 11:24:09 -07:00
tegra30-cardhu-a02.dts
ARM: dt: t30 cardhu: set pinmux and power for wlan
2012-11-15 15:07:28 -07:00
tegra30-cardhu-a04.dts
ARM: dt: t30 cardhu: set pinmux and power for wlan
2012-11-15 15:07:28 -07:00
tegra30-cardhu.dtsi
ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi
2013-01-28 11:24:09 -07:00
tegra30.dtsi
ARM: tegra: remove clock-frequency properties from serial nodes
2013-02-13 11:17:02 -07:00
tegra114-dalmore.dts
ARM: dt: tegra114: Add new board, Dalmore
2013-01-28 11:23:08 -07:00
tegra114-pluto.dts
ARM: dt: tegra114: Add new board, Pluto
2013-01-28 11:23:11 -07:00
tegra114.dtsi
ARM: DT: tegra114: add pinmux DT entry
2013-01-29 11:02:15 -07:00
tny_a9g20.dts
arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support
2012-04-20 23:17:00 +08:00
tny_a9260_common.dtsi
arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support
2012-04-20 23:17:00 +08:00
tny_a9260.dts
arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support
2012-04-20 23:17:00 +08:00
tny_a9263.dts
ARM: at91: DT: add Calao TNY A9263 board support
2012-04-20 23:17:30 +08:00
tps65217.dtsi
arm/dts: regulator: Add tps65217 device tree data
2012-08-30 13:59:17 -07:00
tps65910.dtsi
arm/dts: regulator: Add tps65910 device tree data
2012-08-30 13:57:53 -07:00
twl4030.dtsi
watchdog: twl4030_wdt: add DT support
2013-01-02 12:07:05 +01:00
twl6030.dtsi
ARM: dts: Add twl6030-usb data
2012-10-29 16:56:29 +01:00
u9540.dts
ARM: ux500: Enable all MMC devices on the u9540 when booting with DT
2012-11-20 16:10:46 +00:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common
2012-04-20 23:17:11 +08:00
usb_a9260_common.dtsi
ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common
2012-04-20 23:17:11 +08:00
usb_a9260.dts
ARM: at91: DT: add Calao USB A9260 DT support
2012-04-20 23:17:15 +08:00
usb_a9263.dts
ARM: at91: DT: add Calao USB A9263 board support
2012-04-20 23:17:27 +08:00
versatile-ab.dts
ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs
2012-04-23 15:46:15 +01:00
versatile-pb.dts
ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs
2012-04-23 15:46:15 +01:00
vexpress-v2m-rs1.dtsi
ARM: vexpress: Remove motherboard dependencies in the DTS files
2012-11-05 17:09:52 +00:00
vexpress-v2m.dtsi
ARM: vexpress: Remove motherboard dependencies in the DTS files
2012-11-05 17:09:52 +00:00
vexpress-v2p-ca5s.dts
ARM: vexpress: Remove motherboard dependencies in the DTS files
2012-11-05 17:09:52 +00:00
vexpress-v2p-ca9.dts
ARM: vexpress: Remove motherboard dependencies in the DTS files
2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15_a7.dts
ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts
2013-01-29 18:20:28 +00:00
vexpress-v2p-ca15-tc1.dts
ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts
2013-01-29 18:20:28 +00:00
vt8500-bv07.dts
arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
2012-09-21 19:23:54 +12:00
vt8500.dtsi
serial: vt8500: UART uses gated clock rather than 24Mhz reference
2013-01-17 18:54:32 -08:00
wm8505-ref.dts
arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
2012-09-21 19:23:54 +12:00
wm8505.dtsi
serial: vt8500: UART uses gated clock rather than 24Mhz reference
2013-01-17 18:54:32 -08:00
wm8650-mid.dts
arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
2012-09-21 19:23:54 +12:00
wm8650.dtsi
serial: vt8500: UART uses gated clock rather than 24Mhz reference
2013-01-17 18:54:32 -08:00
wm8850-w70v2.dts
dts: vt8500: Add initial dts support for WM8850
2013-01-21 23:20:08 -08:00
wm8850.dtsi
dts: vt8500: Add initial dts support for WM8850
2013-01-21 23:20:08 -08:00
xenvm-4.2.dts
arm: introduce a DTS for Xen unprivileged virtual machines
2012-09-24 16:40:52 +00:00
zynq-7000.dtsi
serial: xilinx_uartps: Get clock rate info from dts
2013-01-21 13:56:46 -08:00
zynq-zc702.dts
ARM: zynq: add clk binding support to the ttc
2012-11-14 16:10:42 +01:00