forked from Minki/linux
6fb11131ef
Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
105 lines
2.5 KiB
Plaintext
105 lines
2.5 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "tegra30-cardhu.dtsi"
|
|
|
|
/* This dts file support the cardhu A04 and later versions of board */
|
|
|
|
/ {
|
|
model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
|
|
compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ddr_reg: regulator@100 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ddr";
|
|
reg = <100>;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&pmic 7 0>;
|
|
};
|
|
|
|
sys_3v3_reg: regulator@101 {
|
|
compatible = "regulator-fixed";
|
|
reg = <101>;
|
|
regulator-name = "sys_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&pmic 6 0>;
|
|
};
|
|
|
|
usb1_vbus_reg: regulator@102 {
|
|
compatible = "regulator-fixed";
|
|
reg = <102>;
|
|
regulator-name = "usb1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio 238 0>; /* GPIO PDD6 */
|
|
gpio-open-drain;
|
|
vin-supply = <&vdd_5v0_reg>;
|
|
};
|
|
|
|
usb3_vbus_reg: regulator@103 {
|
|
compatible = "regulator-fixed";
|
|
reg = <103>;
|
|
regulator-name = "usb3_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio 236 0>; /* GPIO PDD4 */
|
|
gpio-open-drain;
|
|
vin-supply = <&vdd_5v0_reg>;
|
|
};
|
|
|
|
vdd_5v0_reg: regulator@104 {
|
|
compatible = "regulator-fixed";
|
|
reg = <104>;
|
|
regulator-name = "5v0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&pmic 8 0>;
|
|
};
|
|
|
|
vdd_bl_reg: regulator@105 {
|
|
compatible = "regulator-fixed";
|
|
reg = <105>;
|
|
regulator-name = "vdd_bl";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio 234 0>; /* GPIO PDD2 */
|
|
};
|
|
|
|
vdd_bl2_reg: regulator@106 {
|
|
compatible = "regulator-fixed";
|
|
reg = <106>;
|
|
regulator-name = "vdd_bl2";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
enable-active-high;
|
|
gpio = <&gpio 232 0>; /* GPIO PDD0 */
|
|
};
|
|
};
|
|
|
|
sdhci@78000400 {
|
|
status = "okay";
|
|
power-gpios = <&gpio 27 0>; /* gpio PD3 */
|
|
bus-width = <4>;
|
|
};
|
|
};
|