leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
23866a3def
linux/arch/arm/boot/dts/imx7d-nitrogen7.dts
Sascha Hauer 213e51ca8d ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names 
The i.MX7 has two iomux controllers. the iomuxc and the iomuxc_lpsr.
In a board dts we have to make sure that both controllers are supplied
with the correct pins. It's way too easy to do this wrong since only
a look into the reference manual can reveal which pins belong to which
controller. To make this clearer add "LPSR" to the pin names which
belong to the LPSR controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-29 09:53:27 +08:00

745 lines
18 KiB
Plaintext
Raw Blame History

/*
* Copyright 2016 Boundary Devices, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx7d.dtsi"
/ {
model = "Boundary Devices i.MX7 Nitrogen7 Board";
compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
aliases {
fb_lcd = &lcdif;
t_lcd = &t_lcd;
};
memory {
reg = <0x80000000 0x40000000>;
};
backlight-j9 {
compatible = "gpio-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight_j9>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
default-on;
};
backlight-j20 {
compatible = "pwm-backlight";
pwms = <&pwm1 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_can2_3v3: regulator-can2-3v3 {
compatible = "regulator-fixed";
regulator-name = "can2-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
};
reg_vref_1v8: regulator-vref-1v8 {
compatible = "regulator-fixed";
regulator-name = "vref-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vref_3v3: regulator-vref-3v3 {
compatible = "regulator-fixed";
regulator-name = "vref-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_wlan: regulator-wlan {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "slow";
regulator-name = "reg_wlan";
startup-delay-us = <70000>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <&reg_vref_1v8>;
status = "okay";
};
&adc2 {
vref-supply = <&reg_vref_1v8>;
status = "okay";
};
&clks {
assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
<&clks IMX7D_CLKO2_ROOT_DIV>;
assigned-clock-parents = <&clks IMX7D_CKIL>;
assigned-clock-rates = <0>, <32768>;
};
&cpu0 {
arm-supply = <&sw1a_reg>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@4 {
reg = <4>;
};
};
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_can2_3v3>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pfuze3000@08 {
compatible = "fsl,pfuze3000";
reg = <0x08>;
regulators {
sw1a_reg: sw1a {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
/* use sw1c_reg to align with pfuze100/pfuze200 */
sw1c_reg: sw1b {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1475000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1850000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1650000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen2_reg: vldo2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-always-on;
};
vgen3_reg: vccsd {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: v33 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
rtc@68 {
compatible = "rv4162";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_rv4162>;
reg = <0x68>;
interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
touch@48 {
compatible = "ti,tsc2004";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_tsc2004>;
interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
codec: wm8960@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
clock-names = "mclk";
wlf,shared-lrclk;
};
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
lcd-supply = <&reg_vref_3v3>;
display = <&display0>;
status = "okay";
display0: lcd-display {
bits-per-pixel = <16>;
bus-width = <18>;
display-timings {
native-mode = <&t_lcd>;
t_lcd: t_lcd_default {
/* default to Okaya display */
clock-frequency = <30000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <40>;
hback-porch = <40>;
hsync-len = <48>;
vback-porch = <29>;
vfront-porch = <13>;
vsync-len = <3>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
status = "okay";
};
&uart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
uart-has-rtscts;
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usb_otg1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usb_otg2_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2>;
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vgen3_reg>;
bus-width = <4>;
fsl,tuning-step = <2>;
wakeup-source;
keep-power-in-suspend;
status = "okay";
};
&usdhc2 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wlan>;
cap-power-off-card;
keep-power-in-suspend;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio4>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
ref-clock-frequency = <38400000>;
};
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog1>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>;
pinctrl_hog_1: hoggrp-1 {
fsl,pins = <
MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d
MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d
>;
};
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3
MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3
MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71
MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71
MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71
MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71
MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71
MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71
MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71
MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71
MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d
MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d
MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
>;
};
pinctrl_i2c2_rv4162: i2c2-rv4162grp {
fsl,pins = <
MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
>;
};
pinctrl_i2c3_tsc2004: i2c3tsc2004grp {
fsl,pins = <
MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79
MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>;
};
pinctrl_j2: j2grp {
fsl,pins = <
MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d
MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d
MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d
MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d
MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d
MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d
MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d
MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d
MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d
MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d
MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d
MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d
MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d
MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d
MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d
MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d
MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d
MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d
MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d
MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d
MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d
MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d
MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d
MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d
MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d
MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d
MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d
MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d
MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d
MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d
MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d
MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d
MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d
>;
};
pinctrl_lcdif_dat: lcdifdatgrp {
fsl,pins = <
MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
>;
};
pinctrl_lcdif_ctrl: lcdifctrlgrp {
fsl,pins = <
MX7D_PAD_LCD_CLK__LCD_CLK 0x79
MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79
MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79
MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79
MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79
MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79
MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79
MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79
>;
};
pinctrl_usbotg2: usbotg2grp {
fsl,pins = <
MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75
MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX7D_PAD_SD2_CMD__SD2_CMD 0x59
MX7D_PAD_SD2_CLK__SD2_CLK 0x19
MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59
MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
MX7D_PAD_SD3_CLK__SD3_CLK 0x19
MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
>;
};
};
&iomuxc_lpsr {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_2>;
pinctrl_hog_2: hoggrp-2 {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d
MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d
>;
};
pinctrl_backlight_j9: backlightj9grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d
>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d
MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14
>;
};
pinctrl_wdog1: wdog1grp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B 0x75
>;
};
};
Reference in New Issue View Git Blame Copy Permalink