linux/drivers/scsi
Linus Torvalds 78f8601354 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt departement delivers this time:

   - New infrastructure to manage NMIs on platforms which have a sane
     NMI delivery, i.e. identifiable NMI vectors instead of a single
     lump.

   - Simplification of the interrupt affinity management so drivers
     don't have to implement ugly loops around the PCI/MSI enablement.

   - Speedup for interrupt statistics in /proc/stat

   - Provide a function to retrieve the default irq domain

   - A new interrupt controller for the Loongson LS1X platform

   - Affinity support for the SiFive PLIC

   - Better support for the iMX irqsteer driver

   - NUMA aware memory allocations for GICv3

   - The usual small fixes, improvements and cleanups all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  irqchip/imx-irqsteer: Add multi output interrupts support
  irqchip/imx-irqsteer: Change to use reg_num instead of irq_group
  dt-bindings: irq: imx-irqsteer: Add multi output interrupts support
  dt-binding: irq: imx-irqsteer: Use irq number instead of group number
  irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code
  irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tables
  irqdomain: Allow the default irq domain to be retrieved
  irqchip/sifive-plic: Implement irq_set_affinity() for SMP host
  irqchip/sifive-plic: Differentiate between PLIC handler and context
  irqchip/sifive-plic: Add warning in plic_init() if handler already present
  irqchip/sifive-plic: Pre-compute context hart base and enable base
  PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets
  genirq/affinity: Remove the leftovers of the original set support
  nvme-pci: Simplify interrupt allocation
  genirq/affinity: Add new callback for (re)calculating interrupt sets
  genirq/affinity: Store interrupt sets size in struct irq_affinity
  genirq/affinity: Code consolidation
  irqchip/irq-sifive-plic: Check and continue in case of an invalid cpuid.
  irqchip/i8259: Fix shutdown order by moving syscore_ops registration
  dt-bindings: interrupt-controller: loongson ls1x intc
  ...
2019-03-05 12:21:47 -08:00
..
aacraid scsi: communicate max segment size to the DMA mapping code 2019-01-22 20:40:59 -05:00
aic7xxx scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aic94xx scsi: aic94xx: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:37:26 -05:00
arcmsr cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
arm scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
be2iscsi genirq/affinity: Add new callback for (re)calculating interrupt sets 2019-02-18 11:21:28 +01:00
bfa SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
bnx2fc SCSI fixes on 20190201 2019-02-02 10:12:53 -08:00
bnx2i cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
csiostor SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
cxgbi scsi: cxgb4i: add wait_for_completion() 2019-01-11 22:33:49 -05:00
cxlflash scsi: cxlflash: Prevent deadlock when adapter probe fails 2019-02-04 22:24:02 -05:00
device_handler scsi: return blk_status_t from device handler ->prep_fn 2018-11-09 19:17:14 -07:00
dpt
esas2r scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
fcoe scsi: fcoe: remove set but not used variable 'port' 2018-12-20 19:46:20 -05:00
fnic SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
hisi_sas scsi: hisi_sas: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:44:40 -05:00
ibmvscsi scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ibmvscsi_tgt scsi: target: replace fabric_ops.name with fabric_alias 2018-11-28 18:50:59 -05:00
isci scsi: isci: initialize shost fully before calling scsi_add_host() 2019-01-08 22:27:24 -05:00
libfc Revert "scsi: libfc: Add WARN_ON() when deleting rports" 2019-02-04 22:17:33 -05:00
libsas scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached 2019-02-15 22:16:07 -05:00
lpfc SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
megaraid SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
mpt3sas scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through 2018-12-20 19:48:07 -05:00
mvsas scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
osd block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
pcmcia scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
pm8001 SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
qedf cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
qedi SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
qla2xxx SCSI fixes on 20190215 2019-02-15 13:36:43 -08:00
qla4xxx SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
smartpqi SCSI fixes on 20190118 2019-01-20 09:15:04 +12:00
snic scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
sym53c8xx_2 scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ufs scsi: ufs: Use explicit access size in ufshcd_dump_regs 2019-01-22 21:11:40 -05:00
.gitignore
3w-9xxx.c scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:37:25 -05:00
3w-9xxx.h
3w-sas.c SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
3w-sas.h
3w-xxxx.c scsi: 3w-xxxx: fix indentation issue, add missing tab 2018-12-19 21:54:07 -05:00
3w-xxxx.h scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
53c700_d.h_shipped
53c700.c scsi: 53c700: pass correct "dev" to dma_alloc_attrs() 2019-01-29 01:33:00 -05:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
a100u2w.h
a2091.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
a2091.h
a3000.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
a3000.h
a4000t.c
advansys.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.h
aha1542.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1542.h
aha1740.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
atari_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
atp870u.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
atp870u.h
BusLogic.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c
dc395x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dc395x.h
dmx3191d.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dpt_i2o.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
esp_scsi.h scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
FlashPoint.c scsi: FlashPoint: Remove unnecessary parentheses 2018-09-25 20:45:53 -04:00
g_NCR5380.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gdth_ioctl.h
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h
gdth.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gvp11.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gvp11.h
hosts.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
hpsa_cmd.h
hpsa.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hptiop.c scsi: hptiop: fix calls to dma_set_mask() 2019-02-25 21:44:40 -05:00
hptiop.h
imm.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
imm.h
initio.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
initio.h
ipr.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ipr.h scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ips.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
ips.h scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi: Capture iscsi debug messages using tracepoints 2018-12-20 20:03:55 -05:00
iscsi_tcp.h
jazz_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
Kconfig Linux 4.20-rc3 2018-11-18 15:46:03 -07:00
lasi700.c
libiscsi_tcp.c scsi: iscsi: Capture iscsi debug messages using tracepoints 2018-12-20 20:03:55 -05:00
libiscsi.c scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task 2019-02-15 22:05:04 -05:00
mac53c94.c scsi: mac53c94: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
mac53c94.h
mac_esp.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
mac_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
Makefile scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
megaraid.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
mesh.h
mvme16x_scsi.c
mvme147.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
mvme147.h
mvumi.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
mvumi.h
myrb.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
myrb.h scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrs.c scsi: myrs: remove the dma_boundary_limit 2018-12-19 21:43:30 -05:00
myrs.h scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
ncr53c8xx.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Return false instead of NULL 2018-11-05 22:47:38 -05:00
NCR5380.h scsi: NCR5380: Have NCR5380_select() return a bool 2018-09-28 02:17:51 -04:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
nsp32.h
osst_detect.h
osst_options.h
osst.c block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
osst.h
pmcraid.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ppa.h
ps3rom.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qla1280.c scsi: qla1280: set 64bit coherent mask 2019-01-11 22:30:51 -05:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
qlogicpti.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qlogicpti.h
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c
scsi_debug.c scsi: scsi_debug: fix write_same with virtual_gb problem 2019-01-29 01:24:31 -05:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c scsi: Do not rely on blk-mq for double completions 2018-11-26 10:34:26 -07:00
scsi_ioctl.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
scsi_lib_dma.c
scsi_lib.c scsi: core: Avoid that system resume triggers a kernel warning 2019-02-27 08:51:07 -05:00
scsi_logging.c
scsi_logging.h
scsi_netlink.c
scsi_pm.c scsi: core: Synchronize request queue PM status only on successful resume 2019-01-08 21:57:26 -05:00
scsi_priv.h scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_proc.c
scsi_sas_internal.h
scsi_scan.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_sysctl.c
scsi_sysfs.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_trace.c
scsi_transport_api.h
scsi_transport_fc.c bsg: convert to use blk-mq 2018-11-07 13:42:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
scsi_transport_sas.c bsg: provide bsg_remove_queue() helper 2018-11-07 13:42:32 -07:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation 2019-02-15 22:09:54 -05:00
sd.c scsi: sd: fix entropy gathering for most rotational disks 2019-02-12 22:18:26 -05:00
sd.h scsi: return blk_status_t from scsi_init_io and ->init_command 2018-11-09 19:17:14 -07:00
sense_codes.h
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
sgiwd93.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c
sr.c scsi: return blk_status_t from scsi_init_io and ->init_command 2018-11-09 19:17:14 -07:00
sr.h
st_options.h
st.c block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
st.h
stex.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
storvsc_drv.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
sun3_scsi_vme.c
sun3_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sun3x_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
sun_esp.c scsi: sun_esp: Use of_node_name_eq for node name comparisons 2018-12-07 21:56:06 -05:00
virtio_scsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.h
wd33c93.c
wd33c93.h
wd719x.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
wd719x.h scsi: wd719x: use per-command private data 2018-11-15 14:27:08 -05:00
xen-scsifront.c scsi: xen-scsifront: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
zalon.c
zorro7xx.c
zorro_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00