| .. |
|
gpio-74x164.c
|
The is the bulk of GPIO changes for the v4.16 kernel cycle.
|
2018-01-31 12:25:27 -08:00 |
|
gpio-74xx-mmio.c
|
gpio: 74xx-mmio: Use of_device_get_match_data()
|
2018-05-16 14:35:24 +02:00 |
|
gpio-104-dio-48e.c
|
gpio: 104-dio-48e: Mask read inputs for get_multiple
|
2018-11-05 08:54:41 +01:00 |
|
gpio-104-idi-48.c
|
gpio: 104-idi-48e: Mask the read inputs for get_multiple
|
2018-11-05 08:54:41 +01:00 |
|
gpio-104-idio-16.c
|
gpio: 104-idio-16: Implement get_multiple callback
|
2018-03-26 10:10:18 +02:00 |
|
gpio-adnp.c
|
treewide: devm_kzalloc() -> devm_kcalloc()
|
2018-06-12 16:19:22 -07:00 |
|
gpio-adp5520.c
|
drivers: gpio: Update MODULE AUTHOR email address
|
2018-08-29 13:30:25 +02:00 |
|
gpio-adp5588.c
|
This is the bulk of GPIO changes for the v4.20 series:
|
2018-10-23 08:45:05 +01:00 |
|
gpio-altera-a10sr.c
|
gpio: altera-a10sr: Set proper output level for direction_output
|
2019-01-23 17:24:02 +01:00 |
|
gpio-altera.c
|
gpio: altera: Include GPIO driver header
|
2018-01-13 22:18:34 +01:00 |
|
gpio-amd8111.c
|
gpio: amd8111: Include proper header
|
2018-01-13 22:22:49 +01:00 |
|
gpio-amdpt.c
|
|
|
|
gpio-arizona.c
|
gpio: arizona: Include proper header
|
2018-01-13 22:47:48 +01:00 |
|
gpio-aspeed.c
|
gpio: aspeed: remove duplicated statement
|
2018-12-21 11:14:11 +01:00 |
|
gpio-ath79.c
|
gpio: fix meaningless return expression
|
2018-07-29 23:34:54 +02:00 |
|
gpio-bcm-kona.c
|
gpio-bcm-kona: use new req/relres and dis/enable_irq funcs
|
2018-09-10 08:57:36 +02:00 |
|
gpio-bd9571mwv.c
|
gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
|
2017-04-28 09:47:46 +02:00 |
|
gpio-brcmstb.c
|
gpio: brcmstb: allow 0 width GPIO banks
|
2018-08-30 11:04:50 +02:00 |
|
gpio-bt8xx.c
|
gpio: bt8xx: Include proper header
|
2018-01-13 22:56:52 +01:00 |
|
gpio-cadence.c
|
gpio: Add Cadence GPIO driver
|
2018-12-21 11:41:00 +01:00 |
|
gpio-clps711x.c
|
|
|
|
gpio-creg-snps.c
|
GPIO: add single-register GPIO via CREG driver
|
2018-10-10 09:21:06 +02:00 |
|
gpio-crystalcove.c
|
gpio: crystalcove: Include proper header
|
2018-01-14 01:48:48 +01:00 |
|
gpio-cs5535.c
|
gpio: cs5535: Include proper header
|
2018-01-14 01:56:24 +01:00 |
|
gpio-da9052.c
|
gpio: da905x: Include proper header
|
2018-01-14 02:00:10 +01:00 |
|
gpio-da9055.c
|
gpio: da905x: Include proper header
|
2018-01-14 02:00:10 +01:00 |
|
gpio-davinci.c
|
gpio: davinci: restore a way to manually specify the GPIO base
|
2018-11-26 16:45:10 +05:30 |
|
gpio-dln2.c
|
gpio: dln2: Include proper header
|
2018-03-19 01:50:07 +01:00 |
|
gpio-dwapb.c
|
gpio: gpio-dwapb: simplify getting .driver_data
|
2018-11-05 08:54:41 +01:00 |
|
gpio-eic-sprd.c
|
gpio: sprd: Fix incorrect irq type setting for the async EIC
|
2019-01-23 17:24:01 +01:00 |
|
gpio-em.c
|
gpio: em: Don't shadow error code of gpiochip_lock_as_irq()
|
2018-08-06 23:46:55 +02:00 |
|
gpio-ep93xx.c
|
gpio: ep93xx: fix test for end of loop
|
2018-09-10 08:48:24 +02:00 |
|
gpio-exar.c
|
gpio: exar: Use correct property prefix and document bindings
|
2017-08-01 13:43:55 +02:00 |
|
gpio-f7188x.c
|
gpio: f7188x: Add a missing break
|
2017-04-28 10:09:16 +02:00 |
|
gpio-ftgpio010.c
|
gpio: ftgpio: Support debounce timer
|
2018-08-30 09:14:54 +02:00 |
|
gpio-ge.c
|
gpio: ge: Fix build warning
|
2018-05-16 14:35:24 +02:00 |
|
gpio-gpio-mm.c
|
gpio: gpio-mm: Mask read inputs for get_multiple
|
2018-11-05 08:54:41 +01:00 |
|
gpio-grgpio.c
|
drivers/gpio/gpio-grgpio.c: Remove duplicate header
|
2018-11-19 15:09:22 +01:00 |
|
gpio-hlwd.c
|
gpio: Add GPIO driver for Nintendo Wii
|
2018-02-22 13:54:35 +01:00 |
|
gpio-htc-egpio.c
|
gpio: htc-egpio: Remove set but not used variable 'bit'
|
2018-10-01 12:27:19 +02:00 |
|
gpio-ich.c
|
gpio: ich: Convert to use SPDX identifier
|
2018-12-07 17:34:07 +02:00 |
|
gpio-intel-mid.c
|
gpio: intel-mid: Convert to use SPDX identifier
|
2018-12-07 17:34:07 +02:00 |
|
gpio-iop.c
|
gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
|
2017-12-02 22:42:21 +01:00 |
|
gpio-it87.c
|
gpio: it87: Add support for IT8613
|
2018-08-10 23:19:17 +02:00 |
|
gpio-janz-ttl.c
|
gpio: janz-ttl: Use BIT() macro
|
2018-03-19 01:50:30 +01:00 |
|
gpio-kempld.c
|
gpio: kempld: Include the right header
|
2018-03-19 01:50:31 +01:00 |
|
gpio-ks8695.c
|
gpio: ks8695: Change to use DEFINE_SHOW_ATTRIBUTE macro
|
2018-12-07 11:10:14 +01:00 |
|
gpio-loongson1.c
|
gpio: loongson1: fix bgpio usage
|
2017-10-25 11:25:38 +02:00 |
|
gpio-loongson.c
|
gpio: loongson: Use BIT() macros
|
2018-05-16 14:35:24 +02:00 |
|
gpio-lp873x.c
|
gpio: lp873x: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-lp3943.c
|
gpio: lp3943: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-lp87565.c
|
gpio: lp87565: Set proper output level and direction for direction_output
|
2017-07-31 15:26:57 +02:00 |
|
gpio-lpc18xx.c
|
gpio: lpc18xx: fix GPIO controller driver build as a module
|
2018-12-10 09:10:46 +01:00 |
|
gpio-lpc32xx.c
|
gpio: lpc32xx: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-lynxpoint.c
|
intel-gpio for v4.21-1
|
2018-12-14 14:27:41 +01:00 |
|
gpio-madera.c
|
gpio: madera: Support Cirrus Logic Madera class codecs
|
2018-06-05 11:15:30 +01:00 |
|
gpio-max730x.c
|
gpio: max730x: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-max732x.c
|
gpio: max732x: add error handling for i2c_new_dummy
|
2018-06-18 07:55:30 +02:00 |
|
gpio-max3191x.c
|
gpiolib: Pass array info to get/set array functions
|
2018-09-13 11:16:54 +02:00 |
|
gpio-max7300.c
|
|
|
|
gpio-max7301.c
|
gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
|
2018-12-21 09:23:45 +01:00 |
|
gpio-max77620.c
|
regmap: regmap-irq/gpio-max77620: add level-irq support
|
2018-12-19 18:35:45 +00:00 |
|
gpio-mb86s7x.c
|
gpio: mb86s70: Revert "Return error if requesting an already assigned gpio"
|
2017-10-31 13:13:34 +01:00 |
|
gpio-mc9s08dz60.c
|
gpio: mc9s08dz60: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-mc33880.c
|
gpio: mc33880: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-menz127.c
|
gpio: Fix wrong rounding in gpio-menz127
|
2018-06-18 07:55:30 +02:00 |
|
gpio-merrifield.c
|
gpio: merrifield: Convert to use SPDX identifier
|
2018-12-07 17:34:08 +02:00 |
|
gpio-ml-ioh.c
|
gpio: ml-ioh: Fix buffer underwrite on probe error path
|
2018-07-29 23:13:09 +02:00 |
|
gpio-mm-lantiq.c
|
gpio: mm-lantiq: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-mmio.c
|
gpio: Use SPDX header for core library
|
2018-09-25 09:08:48 +02:00 |
|
gpio-mockup.c
|
gpio: mockup: fix indicated direction
|
2018-11-16 23:06:29 +01:00 |
|
gpio-mpc8xxx.c
|
gpio: mpc8xxx: Do not reverse bits using bgpio
|
2017-10-25 11:25:40 +02:00 |
|
gpio-mpc5200.c
|
|
|
|
gpio-msic.c
|
gpio: msic: Include the right header
|
2018-05-16 14:35:24 +02:00 |
|
gpio-mt7621.c
|
gpio: MT7621: use a per instance irq_chip structure
|
2019-02-08 12:30:15 +01:00 |
|
gpio-mvebu.c
|
This is the bulk of GPIO changes for the v4.21 kernel series:
|
2018-12-28 20:00:21 -08:00 |
|
gpio-mxc.c
|
gpio: mxc: move gpio noirq suspend/resume to syscore phase
|
2018-11-16 22:56:54 +01:00 |
|
gpio-mxs.c
|
gpio: mxs: read pin level directly instead of using .get
|
2018-12-21 11:29:57 +01:00 |
|
gpio-octeon.c
|
gpio: octeon: Include the right header
|
2018-05-24 14:22:04 +02:00 |
|
gpio-omap.c
|
This is the bulk of GPIO changes for the v4.21 kernel series:
|
2018-12-28 20:00:21 -08:00 |
|
gpio-palmas.c
|
gpio: palmas: Include the right header
|
2018-05-24 14:25:13 +02:00 |
|
gpio-pca953x.c
|
gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static
|
2019-01-11 09:16:40 +01:00 |
|
gpio-pcf857x.c
|
gpio: pcf857x: Fix interrupts on multiple instances
|
2019-01-23 17:24:01 +01:00 |
|
gpio-pch.c
|
gpio: pch: Convert to use SPDX identifier
|
2018-12-07 17:34:08 +02:00 |
|
gpio-pci-idio-16.c
|
gpio: pci-idio-16: Mask read inputs for get_multiple
|
2018-11-05 08:54:42 +01:00 |
|
gpio-pcie-idio-24.c
|
gpio: pcie-idio-24: Mask read inputs for get_multiple
|
2018-11-05 08:54:42 +01:00 |
|
gpio-pisosr.c
|
gpio-pisosr: add support for get_multiple
|
2018-07-29 21:55:33 +02:00 |
|
gpio-pl061.c
|
gpio: pl061: Move irq_chip definition inside struct pl061
|
2018-11-05 08:54:42 +01:00 |
|
gpio-pmic-eic-sprd.c
|
gpio: pmic_eic: Add edge trigger emulation for PMIC EIC
|
2018-05-16 14:35:24 +02:00 |
|
gpio-pxa.c
|
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
|
2019-02-14 10:06:03 +01:00 |
|
gpio-raspberrypi-exp.c
|
gpio: raspberrypi-exp: decrease refcount on firmware dt node
|
2018-12-17 15:28:30 +01:00 |
|
gpio-rc5t583.c
|
gpio: rc5t583: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-rcar.c
|
gpio: rcar: reference device instead of platform device
|
2018-12-05 22:52:31 +01:00 |
|
gpio-rdc321x.c
|
gpio: rdc321x: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-reg.c
|
gpio: gpio-reg: fix build
|
2017-12-22 15:24:31 +01:00 |
|
gpio-sa1100.c
|
gpio: sa1100: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-sama5d2-piobu.c
|
gpio: add driver for SAMA5D2 PIOBU pins
|
2018-12-21 10:55:57 +01:00 |
|
gpio-sch311x.c
|
gpio: sch311x: clean an indentation issue, remove extraneous space
|
2018-11-05 08:54:42 +01:00 |
|
gpio-sch.c
|
gpio: sch: Convert to use SPDX identifier
|
2018-12-07 17:34:08 +02:00 |
|
gpio-siox.c
|
gpio: new driver to work with a 8x12 siox
|
2018-09-28 09:30:42 +02:00 |
|
gpio-sodaville.c
|
gpio: sodaville: Convert to use SPDX identifier
|
2018-12-07 17:34:08 +02:00 |
|
gpio-spear-spics.c
|
gpio: spear-spics: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-sprd.c
|
gpio: Add GPIO driver for Spreadtrum SC9860 platform
|
2018-03-02 11:00:43 +01:00 |
|
gpio-sta2x11.c
|
gpio: sta2x11: Inline regs macro
|
2018-07-02 16:00:49 +02:00 |
|
gpio-stmpe.c
|
gpio: stmpe: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-stp-xway.c
|
gpio: stp-xway: Include the right header
|
2018-07-02 16:00:49 +02:00 |
|
gpio-syscon.c
|
gpio: syscon: Fix possible NULL ptr usage
|
2018-10-10 10:33:11 +02:00 |
|
gpio-tb10x.c
|
gpio: tb10x: Use GENERIC_GPIO
|
2018-08-29 08:53:37 +02:00 |
|
gpio-tc3589x.c
|
gpio: Move irqdomain into struct gpio_irq_chip
|
2017-11-08 14:06:21 +01:00 |
|
gpio-tegra186.c
|
gpio: tegra186: Rename flow variable to type
|
2018-12-14 14:34:10 +01:00 |
|
gpio-tegra.c
|
gpio: gpio-tegra: simplify getting .driver_data
|
2018-11-05 08:54:41 +01:00 |
|
gpio-thunderx.c
|
treewide: devm_kzalloc() -> devm_kcalloc()
|
2018-06-12 16:19:22 -07:00 |
|
gpio-timberdale.c
|
gpio: timberdale: Include the right header
|
2018-08-10 23:04:27 +02:00 |
|
gpio-tpic2810.c
|
|
|
|
gpio-tps6586x.c
|
gpio: tps65xxx: Use SPDX license tag
|
2018-09-04 08:22:47 +02:00 |
|
gpio-tps65086.c
|
gpio: tps65xxx: Use SPDX license tag
|
2018-09-04 08:22:47 +02:00 |
|
gpio-tps65218.c
|
pinctrl / gpio: Introduce .set_config() callback for GPIO chips
|
2017-01-26 15:27:37 +01:00 |
|
gpio-tps65910.c
|
gpio: tps65xxx: Use SPDX license tag
|
2018-09-04 08:22:47 +02:00 |
|
gpio-tps65912.c
|
gpio: tps65xxx: Use SPDX license tag
|
2018-09-04 08:22:47 +02:00 |
|
gpio-tps68470.c
|
gpio: tps68470: Update to SPDX license identifier
|
2018-02-23 15:26:42 +01:00 |
|
gpio-ts4800.c
|
gpio: ts4800: Fix module autoload
|
2016-10-21 14:55:07 +02:00 |
|
gpio-ts4900.c
|
gpio: ts4900: Use of_device_get_match_data()
|
2018-05-16 14:35:24 +02:00 |
|
gpio-ts5500.c
|
gpio: ts5500: Delete platform data handling
|
2018-09-04 08:22:47 +02:00 |
|
gpio-twl4030.c
|
gpio: twl4030: Implement .get_direction()
|
2018-09-10 08:48:51 +02:00 |
|
gpio-twl6040.c
|
gpio: twl6040: Implement .get_direction()
|
2018-09-10 08:49:22 +02:00 |
|
gpio-ucb1400.c
|
|
|
|
gpio-uniphier.c
|
gpio: uniphier: convert to SPDX License Identifier
|
2018-12-07 13:40:28 +01:00 |
|
gpio-vf610.c
|
gpio: vf610: Mask all GPIO interrupts
|
2019-01-28 15:28:43 +01:00 |
|
gpio-viperboard.c
|
gpio: viperboard: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-vr41xx.c
|
gpio: vr41xx: Delete vr41xx_gpio_pullupdown() callback
|
2018-09-17 10:55:24 -07:00 |
|
gpio-vx855.c
|
gpio: vx855: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-wcove.c
|
gpio: Move irqdomain into struct gpio_irq_chip
|
2017-11-08 14:06:21 +01:00 |
|
gpio-winbond.c
|
gpio: winbond: Add driver
|
2018-01-09 14:51:00 +01:00 |
|
gpio-wm831x.c
|
gpio: wm8xxx: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-wm8350.c
|
gpio: wm8xxx: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-wm8994.c
|
gpio: wm8xxx: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-ws16c48.c
|
gpio: ws16c48: Mask read inputs for get_multiple
|
2018-11-05 08:54:42 +01:00 |
|
gpio-xgene-sb.c
|
gpio: xgene-sb: Don't shadow error code of gpiochip_lock_as_irq()
|
2018-08-06 23:46:55 +02:00 |
|
gpio-xgene.c
|
gpio: xgene: mark PM functions as __maybe_unused
|
2017-03-06 14:35:22 +01:00 |
|
gpio-xilinx.c
|
gpio: xilinx: Use the right include
|
2018-08-10 23:19:17 +02:00 |
|
gpio-xlp.c
|
gpio: xlp: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-xra1403.c
|
gpio: xra1403: Switch to a fixed upper bound for registers
|
2018-04-27 01:06:21 +02:00 |
|
gpio-xtensa.c
|
gpio: xtensa: Cut down on boilerplate
|
2018-09-17 10:55:24 -07:00 |
|
gpio-zevio.c
|
gpio: zevio: Include the right header
|
2018-09-04 08:22:47 +02:00 |
|
gpio-zx.c
|
gpio: Move irqdomain into struct gpio_irq_chip
|
2017-11-08 14:06:21 +01:00 |
|
gpio-zynq.c
|
gpio: zynq: Report gpio direction at boot
|
2018-12-07 13:37:25 +01:00 |
|
gpiolib-acpi.c
|
gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts
|
2019-01-07 09:23:23 +01:00 |
|
gpiolib-devprop.c
|
Accept partial 'gpio-line-names' property.
|
2018-10-01 13:15:06 +02:00 |
|
gpiolib-devres.c
|
gpio: Add devm_gpiod_unhinge()
|
2018-12-11 01:04:23 +00:00 |
|
gpiolib-legacy.c
|
gpio: Use SPDX header for core library
|
2018-09-25 09:08:48 +02:00 |
|
gpiolib-of.c
|
gpio: of: Fix logic inversion
|
2019-01-24 19:03:25 +00:00 |
|
gpiolib-sysfs.c
|
gpio: Use SPDX header for core library
|
2018-09-25 09:08:48 +02:00 |
|
gpiolib.c
|
gpiolib: fix line event timestamps for nested irqs
|
2019-01-23 17:24:01 +01:00 |
|
gpiolib.h
|
gpio: Export gpiod_get_from_of_node()
|
2018-12-11 01:04:04 +00:00 |
|
Kconfig
|
gpio: sama5d2-piobu: Depend on OF_GPIO
|
2018-12-22 11:08:06 +01:00 |
|
Makefile
|
gpio: Add Cadence GPIO driver
|
2018-12-21 11:41:00 +01:00 |
|
TODO
|
gpio: Add global TODO file for GPIO
|
2018-11-05 08:54:40 +01:00 |
