forked from Minki/linux
9b791d4766
This patch fixes cache memory parameter setting for the M32104 target. So
far, its performance seemed to have been degraded due to incorrect cache
parameter setting.
* arch/m32r/boot/setup.S: Set SFR(Special Fuction Registers) region
to be non-cachable explicitly.
* arch/m32r/mm/cache.c: Fix cache flushing routines not to switch off
the M32104 cache.
Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
186 lines
4.2 KiB
ArmAsm
186 lines
4.2 KiB
ArmAsm
/*
|
|
* linux/arch/m32r/boot/setup.S -- A setup code.
|
|
*
|
|
* Copyright (C) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
|
|
* Hitoshi Yamamoto, Hayato Fujiwara
|
|
*
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/segment.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include <linux/config.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/m32r.h>
|
|
|
|
/*
|
|
* References to members of the boot_cpu_data structure.
|
|
*/
|
|
|
|
#define CPU_PARAMS boot_cpu_data
|
|
#define M32R_MCICAR 0xfffffff0
|
|
#define M32R_MCDCAR 0xfffffff4
|
|
#define M32R_MCCR 0xfffffffc
|
|
#define M32R_BSCR0 0xffffffd2
|
|
|
|
;BSEL
|
|
#define BSEL0CR0 0x00ef5000
|
|
#define BSEL0CR1 0x00ef5004
|
|
#define BSEL1CR0 0x00ef5100
|
|
#define BSEL1CR1 0x00ef5104
|
|
#define BSEL0CR0_VAL 0x00000000
|
|
#define BSEL0CR1_VAL 0x01200100
|
|
#define BSEL1CR0_VAL 0x01018000
|
|
#define BSEL1CR1_VAL 0x00200001
|
|
|
|
;SDRAMC
|
|
#define SDRAMC_SDRF0 0x00ef6000
|
|
#define SDRAMC_SDRF1 0x00ef6004
|
|
#define SDRAMC_SDIR0 0x00ef6008
|
|
#define SDRAMC_SDIR1 0x00ef600c
|
|
#define SDRAMC_SD0ADR 0x00ef6020
|
|
#define SDRAMC_SD0ER 0x00ef6024
|
|
#define SDRAMC_SD0TR 0x00ef6028
|
|
#define SDRAMC_SD0MOD 0x00ef602c
|
|
#define SDRAMC_SD1ADR 0x00ef6040
|
|
#define SDRAMC_SD1ER 0x00ef6044
|
|
#define SDRAMC_SD1TR 0x00ef6048
|
|
#define SDRAMC_SD1MOD 0x00ef604c
|
|
#define SDRAM0 0x18000000
|
|
#define SDRAM1 0x1c000000
|
|
|
|
/*------------------------------------------------------------------------
|
|
* start up
|
|
*/
|
|
|
|
/*------------------------------------------------------------------------
|
|
* Kernel entry
|
|
*/
|
|
.section .boot, "ax"
|
|
ENTRY(boot)
|
|
|
|
/* Set cache mode */
|
|
#if defined(CONFIG_CHIP_XNUX2)
|
|
ldi r0, #-2 ;LDIMM (r0, M32R_MCCR)
|
|
ldi r1, #0x0101 ; cache on (with invalidation)
|
|
; ldi r1, #0x00 ; cache off
|
|
sth r1, @r0
|
|
#elif defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_VDEC2) \
|
|
|| defined(CONFIG_CHIP_OPSP)
|
|
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
|
|
ldi r1, #0x73 ; cache on (with invalidation)
|
|
; ldi r1, #0x00 ; cache off
|
|
st r1, @r0
|
|
#elif defined(CONFIG_CHIP_M32102)
|
|
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
|
|
ldi r1, #0x101 ; cache on (with invalidation)
|
|
; ldi r1, #0x00 ; cache off
|
|
st r1, @r0
|
|
#elif defined(CONFIG_CHIP_M32104)
|
|
ldi r0, #-96 ; DNCR0
|
|
seth r1, #0x0060 ; from 0x00600000
|
|
or3 r1, r1, #0x0005 ; size 2MB
|
|
st r1, @r0
|
|
seth r1, #0x0100 ; from 0x01000000
|
|
or3 r1, r1, #0x0003 ; size 16MB
|
|
st r1, @+r0
|
|
seth r1, #0x0200 ; from 0x02000000
|
|
or3 r1, r1, #0x0002 ; size 32MB
|
|
st r1, @+r0
|
|
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
|
|
ldi r1, #0x703 ; cache on (with invalidation)
|
|
st r1, @r0
|
|
#else
|
|
#error unknown chip configuration
|
|
#endif
|
|
|
|
#ifdef CONFIG_SMP
|
|
;; if not BSP (CPU#0) goto AP_loop
|
|
seth r5, #shigh(M32R_CPUID_PORTL)
|
|
ld r5, @(low(M32R_CPUID_PORTL), r5)
|
|
bnez r5, AP_loop
|
|
#if !defined(CONFIG_PLAT_USRV)
|
|
;; boot AP
|
|
ld24 r5, #0xeff2f8 ; IPICR7
|
|
ldi r6, #0x2 ; IPI to CPU1
|
|
st r6, @r5
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Now, Jump to stext
|
|
* if with MMU, TLB on.
|
|
* if with no MMU, only jump.
|
|
*/
|
|
.global eit_vector
|
|
mmu_on:
|
|
LDIMM (r13, stext)
|
|
#ifdef CONFIG_MMU
|
|
bl init_tlb
|
|
LDIMM (r2, eit_vector) ; set EVB(cr5)
|
|
mvtc r2, cr5
|
|
seth r0, #high(MMU_REG_BASE) ; Set MMU_REG_BASE higher
|
|
or3 r0, r0, #low(MMU_REG_BASE) ; Set MMU_REG_BASE lower
|
|
ldi r1, #0x01
|
|
st r1, @(MATM_offset,r0) ; Set MATM (T bit ON)
|
|
ld r0, @(MATM_offset,r0) ; Check
|
|
#else
|
|
#if defined(CONFIG_CHIP_M32700)
|
|
seth r0,#high(M32R_MCDCAR)
|
|
or3 r0,r0,#low(M32R_MCDCAR)
|
|
ld24 r1,#0x8080
|
|
st r1,@r0
|
|
#elif defined(CONFIG_CHIP_M32104)
|
|
LDIMM (r2, eit_vector) ; set EVB(cr5)
|
|
mvtc r2, cr5
|
|
#endif
|
|
#endif /* CONFIG_MMU */
|
|
jmp r13
|
|
nop
|
|
nop
|
|
|
|
#ifdef CONFIG_SMP
|
|
/*
|
|
* AP wait loop
|
|
*/
|
|
ENTRY(AP_loop)
|
|
;; disable interrupt
|
|
clrpsw #0x40
|
|
;; reset EVB
|
|
LDIMM (r4, _AP_RE)
|
|
seth r5, #high(__PAGE_OFFSET)
|
|
or3 r5, r5, #low(__PAGE_OFFSET)
|
|
not r5, r5
|
|
and r4, r5
|
|
mvtc r4, cr5
|
|
;; disable maskable interrupt
|
|
seth r4, #high(M32R_ICU_IMASK_PORTL)
|
|
or3 r4, r4, #low(M32R_ICU_IMASK_PORTL)
|
|
ldi r5, #0
|
|
st r5, @r4
|
|
ld r5, @r4
|
|
;; enable only IPI
|
|
setpsw #0x40
|
|
;; LOOOOOOOOOOOOOOP!!!
|
|
.fillinsn
|
|
2:
|
|
nop
|
|
nop
|
|
bra 2b
|
|
nop
|
|
nop
|
|
|
|
#ifdef CONFIG_CHIP_M32700_TS1
|
|
.global dcache_dummy
|
|
.balign 16, 0
|
|
dcache_dummy:
|
|
.byte 16
|
|
#endif /* CONFIG_CHIP_M32700_TS1 */
|
|
#endif /* CONFIG_SMP */
|
|
|
|
.end
|
|
|