leandrof/linux
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1ee6903b8f
linux/drivers/usb/dwc2
History
Gregory Herrero 1ee6903b8f usb: dwc2: gadget: unmask idstschng interrupt only if controller supports it 
idstschng interrupt should not be used when id pin control is
external. This is already handled on dwc2 host part. Fix it on gadget
part as well.

Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-10-01 12:40:26 -05:00
..
core_intr.c usb: dwc2: host: ignore wakeup interrupt if hibernation supported 2015-10-01 12:40:16 -05:00
core.c usb: dwc2: host: clear pending interrupts prior hibernation 2015-10-01 12:40:17 -05:00
core.h usb: dwc2: gadget: only reset core after addressed state 2015-10-01 12:40:26 -05:00
debug.h usb: dwc2: move debugfs code to a separate file 2015-04-29 15:18:25 -05:00
debugfs.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
gadget.c usb: dwc2: gadget: unmask idstschng interrupt only if controller supports it 2015-10-01 12:40:26 -05:00
hcd_ddma.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_intr.c usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hcd_queue.c usb: dwc2: host: use correct frame number during qh init 2015-10-01 12:40:18 -05:00
hcd.c usb: dwc2: gadget: kill ep0 requests before reinitializing core 2015-10-01 12:40:26 -05:00
hcd.h usb: dwc2: Use platform endianness when accessing registers 2015-09-27 10:54:31 -05:00
hw.h usb: dwc2: gadget: replace constants with defines 2015-01-30 10:34:11 -06:00
Kconfig usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
Makefile usb: dwc2: remove dwc2_platform.ko 2015-04-29 15:20:11 -05:00
pci.c usb: dwc2: pci: Add device mode to the dwc2-pci driver 2015-03-11 15:08:17 -05:00
platform.c usb: dwc2: force dr_mode in case of configuration mismatch 2015-10-01 12:40:23 -05:00