leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1eb80d6ffb
linux/arch/sparc/kernel/tsb.S
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

592 lines
13 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/* tsb.S: Sparc64 TSB table handling.
*
* Copyright (C) 2006 David S. Miller <davem@davemloft.net>
*/
#include <asm/tsb.h>
#include <asm/hypervisor.h>
#include <asm/page.h>
#include <asm/cpudata.h>
#include <asm/mmu.h>
.text
.align 32
/* Invoked from TLB miss handler, we are in the
* MMU global registers and they are setup like
* this:
*
* %g1: TSB entry pointer
* %g2: available temporary
* %g3: FAULT_CODE_{D,I}TLB
* %g4: available temporary
* %g5: available temporary
* %g6: TAG TARGET
* %g7: available temporary, will be loaded by us with
* the physical address base of the linux page
* tables for the current address space
*/
tsb_miss_dtlb:
mov TLB_TAG_ACCESS, %g4
ldxa [%g4] ASI_DMMU, %g4
srlx %g4, PAGE_SHIFT, %g4
ba,pt %xcc, tsb_miss_page_table_walk
sllx %g4, PAGE_SHIFT, %g4
tsb_miss_itlb:
mov TLB_TAG_ACCESS, %g4
ldxa [%g4] ASI_IMMU, %g4
srlx %g4, PAGE_SHIFT, %g4
ba,pt %xcc, tsb_miss_page_table_walk
sllx %g4, PAGE_SHIFT, %g4
/* At this point we have:
* %g1 -- PAGE_SIZE TSB entry address
* %g3 -- FAULT_CODE_{D,I}TLB
* %g4 -- missing virtual address
* %g6 -- TAG TARGET (vaddr >> 22)
*/
tsb_miss_page_table_walk:
TRAP_LOAD_TRAP_BLOCK(%g7, %g5)
/* Before committing to a full page table walk,
* check the huge page TSB.
*/
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
661: ldx [%g7 + TRAP_PER_CPU_TSB_HUGE], %g5
nop
.section .sun4v_2insn_patch, "ax"
.word 661b
mov SCRATCHPAD_UTSBREG2, %g5
ldxa [%g5] ASI_SCRATCHPAD, %g5
.previous
cmp %g5, -1
be,pt %xcc, 80f
nop
/* We need an aligned pair of registers containing 2 values
* which can be easily rematerialized. %g6 and %g7 foot the
* bill just nicely. We'll save %g6 away into %g2 for the
* huge page TSB TAG comparison.
*
* Perform a huge page TSB lookup.
*/
mov %g6, %g2
and %g5, 0x7, %g6
mov 512, %g7
andn %g5, 0x7, %g5
sllx %g7, %g6, %g7
srlx %g4, REAL_HPAGE_SHIFT, %g6
sub %g7, 1, %g7
and %g6, %g7, %g6
sllx %g6, 4, %g6
add %g5, %g6, %g5
TSB_LOAD_QUAD(%g5, %g6)
cmp %g6, %g2
be,a,pt %xcc, tsb_tlb_reload
mov %g7, %g5
/* No match, remember the huge page TSB entry address,
* and restore %g6 and %g7.
*/
TRAP_LOAD_TRAP_BLOCK(%g7, %g6)
srlx %g4, 22, %g6
80: stx %g5, [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP]
#endif
ldx [%g7 + TRAP_PER_CPU_PGD_PADDR], %g7
/* At this point we have:
* %g1 -- TSB entry address
* %g3 -- FAULT_CODE_{D,I}TLB
* %g4 -- missing virtual address
* %g6 -- TAG TARGET (vaddr >> 22)
* %g7 -- page table physical address
*
* We know that both the base PAGE_SIZE TSB and the HPAGE_SIZE
* TSB both lack a matching entry.
*/
tsb_miss_page_table_walk_sun4v_fastpath:
USER_PGTABLE_WALK_TL1(%g4, %g7, %g5, %g2, tsb_do_fault)
/* Valid PTE is now in %g5. */
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
sethi %uhi(_PAGE_PMD_HUGE | _PAGE_PUD_HUGE), %g7
sllx %g7, 32, %g7
andcc %g5, %g7, %g0
be,pt %xcc, 60f
nop
/* It is a huge page, use huge page TSB entry address we
* calculated above. If the huge page TSB has not been
* allocated, setup a trap stack and call hugetlb_setup()
* to do so, then return from the trap to replay the TLB
* miss.
*
* This is necessary to handle the case of transparent huge
* pages where we don't really have a non-atomic context
* in which to allocate the hugepage TSB hash table. When
* the 'mm' faults in the hugepage for the first time, we
* thus handle it here. This also makes sure that we can
* allocate the TSB hash table on the correct NUMA node.
*/
TRAP_LOAD_TRAP_BLOCK(%g7, %g2)
ldx [%g7 + TRAP_PER_CPU_TSB_HUGE_TEMP], %g1
cmp %g1, -1
bne,pt %xcc, 60f
nop
661: rdpr %pstate, %g5
wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate
.section .sun4v_2insn_patch, "ax"
.word 661b
SET_GL(1)
nop
.previous
rdpr %tl, %g7
cmp %g7, 1
bne,pn %xcc, winfix_trampoline
mov %g3, %g4
ba,pt %xcc, etrap
rd %pc, %g7
call hugetlb_setup
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop
60:
#endif
/* At this point we have:
* %g1 -- TSB entry address
* %g3 -- FAULT_CODE_{D,I}TLB
* %g5 -- valid PTE
* %g6 -- TAG TARGET (vaddr >> 22)
*/
tsb_reload:
TSB_LOCK_TAG(%g1, %g2, %g7)
TSB_WRITE(%g1, %g5, %g6)
/* Finally, load TLB and return from trap. */
tsb_tlb_reload:
cmp %g3, FAULT_CODE_DTLB
bne,pn %xcc, tsb_itlb_load
nop
tsb_dtlb_load:
661: stxa %g5, [%g0] ASI_DTLB_DATA_IN
retry
.section .sun4v_2insn_patch, "ax"
.word 661b
nop
nop
.previous
/* For sun4v the ASI_DTLB_DATA_IN store and the retry
* instruction get nop'd out and we get here to branch
* to the sun4v tlb load code. The registers are setup
* as follows:
*
* %g4: vaddr
* %g5: PTE
* %g6: TAG
*
* The sun4v TLB load wants the PTE in %g3 so we fix that
* up here.
*/
ba,pt %xcc, sun4v_dtlb_load
mov %g5, %g3
tsb_itlb_load:
/* Executable bit must be set. */
661: sethi %hi(_PAGE_EXEC_4U), %g4
andcc %g5, %g4, %g0
.section .sun4v_2insn_patch, "ax"
.word 661b
andcc %g5, _PAGE_EXEC_4V, %g0
nop
.previous
be,pn %xcc, tsb_do_fault
nop
661: stxa %g5, [%g0] ASI_ITLB_DATA_IN
retry
.section .sun4v_2insn_patch, "ax"
.word 661b
nop
nop
.previous
/* For sun4v the ASI_ITLB_DATA_IN store and the retry
* instruction get nop'd out and we get here to branch
* to the sun4v tlb load code. The registers are setup
* as follows:
*
* %g4: vaddr
* %g5: PTE
* %g6: TAG
*
* The sun4v TLB load wants the PTE in %g3 so we fix that
* up here.
*/
ba,pt %xcc, sun4v_itlb_load
mov %g5, %g3
/* No valid entry in the page tables, do full fault
* processing.
*/
.globl tsb_do_fault
tsb_do_fault:
cmp %g3, FAULT_CODE_DTLB
661: rdpr %pstate, %g5
wrpr %g5, PSTATE_AG | PSTATE_MG, %pstate
.section .sun4v_2insn_patch, "ax"
.word 661b
SET_GL(1)
ldxa [%g0] ASI_SCRATCHPAD, %g4
.previous
bne,pn %xcc, tsb_do_itlb_fault
nop
tsb_do_dtlb_fault:
rdpr %tl, %g3
cmp %g3, 1
661: mov TLB_TAG_ACCESS, %g4
ldxa [%g4] ASI_DMMU, %g5
.section .sun4v_2insn_patch, "ax"
.word 661b
ldx [%g4 + HV_FAULT_D_ADDR_OFFSET], %g5
nop
.previous
/* Clear context ID bits. */
srlx %g5, PAGE_SHIFT, %g5
sllx %g5, PAGE_SHIFT, %g5
be,pt %xcc, sparc64_realfault_common
mov FAULT_CODE_DTLB, %g4
ba,pt %xcc, winfix_trampoline
nop
tsb_do_itlb_fault:
rdpr %tpc, %g5
ba,pt %xcc, sparc64_realfault_common
mov FAULT_CODE_ITLB, %g4
.globl sparc64_realfault_common
sparc64_realfault_common:
/* fault code in %g4, fault address in %g5, etrap will
* preserve these two values in %l4 and %l5 respectively
*/
ba,pt %xcc, etrap ! Save trap state
1: rd %pc, %g7 ! ...
stb %l4, [%g6 + TI_FAULT_CODE] ! Save fault code
stx %l5, [%g6 + TI_FAULT_ADDR] ! Save fault address
call do_sparc64_fault ! Call fault handler
add %sp, PTREGS_OFF, %o0 ! Compute pt_regs arg
ba,pt %xcc, rtrap ! Restore cpu state
nop ! Delay slot (fill me)
winfix_trampoline:
rdpr %tpc, %g3 ! Prepare winfixup TNPC
or %g3, 0x7c, %g3 ! Compute branch offset
wrpr %g3, %tnpc ! Write it into TNPC
done ! Trap return
/* Insert an entry into the TSB.
*
* %o0: TSB entry pointer (virt or phys address)
* %o1: tag
* %o2: pte
*/
.align 32
.globl __tsb_insert
__tsb_insert:
rdpr %pstate, %o5
wrpr %o5, PSTATE_IE, %pstate
TSB_LOCK_TAG(%o0, %g2, %g3)
TSB_WRITE(%o0, %o2, %o1)
wrpr %o5, %pstate
retl
nop
.size __tsb_insert, .-__tsb_insert
/* Flush the given TSB entry if it has the matching
* tag.
*
* %o0: TSB entry pointer (virt or phys address)
* %o1: tag
*/
.align 32
.globl tsb_flush
.type tsb_flush,#function
tsb_flush:
sethi %hi(TSB_TAG_LOCK_HIGH), %g2
1: TSB_LOAD_TAG(%o0, %g1)
srlx %g1, 32, %o3
andcc %o3, %g2, %g0
bne,pn %icc, 1b
nop
cmp %g1, %o1
mov 1, %o3
bne,pt %xcc, 2f
sllx %o3, TSB_TAG_INVALID_BIT, %o3
TSB_CAS_TAG(%o0, %g1, %o3)
cmp %g1, %o3
bne,pn %xcc, 1b
nop
2: retl
nop
.size tsb_flush, .-tsb_flush
/* Reload MMU related context switch state at
* schedule() time.
*
* %o0: page table physical address
* %o1: TSB base config pointer
* %o2: TSB huge config pointer, or NULL if none
* %o3: Hypervisor TSB descriptor physical address
* %o4: Secondary context to load, if non-zero
*
* We have to run this whole thing with interrupts
* disabled so that the current cpu doesn't change
* due to preemption.
*/
.align 32
.globl __tsb_context_switch
.type __tsb_context_switch,#function
__tsb_context_switch:
rdpr %pstate, %g1
wrpr %g1, PSTATE_IE, %pstate
brz,pn %o4, 1f
mov SECONDARY_CONTEXT, %o5
661: stxa %o4, [%o5] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %o4, [%o5] ASI_MMU
.previous
flush %g6
1:
TRAP_LOAD_TRAP_BLOCK(%g2, %g3)
stx %o0, [%g2 + TRAP_PER_CPU_PGD_PADDR]
ldx [%o1 + TSB_CONFIG_REG_VAL], %o0
brz,pt %o2, 1f
mov -1, %g3
ldx [%o2 + TSB_CONFIG_REG_VAL], %g3
1: stx %g3, [%g2 + TRAP_PER_CPU_TSB_HUGE]
sethi %hi(tlb_type), %g2
lduw [%g2 + %lo(tlb_type)], %g2
cmp %g2, 3
bne,pt %icc, 50f
nop
/* Hypervisor TSB switch. */
mov SCRATCHPAD_UTSBREG1, %o5
stxa %o0, [%o5] ASI_SCRATCHPAD
mov SCRATCHPAD_UTSBREG2, %o5
stxa %g3, [%o5] ASI_SCRATCHPAD
mov 2, %o0
cmp %g3, -1
move %xcc, 1, %o0
mov HV_FAST_MMU_TSB_CTXNON0, %o5
mov %o3, %o1
ta HV_FAST_TRAP
/* Finish up. */
ba,pt %xcc, 9f
nop
/* SUN4U TSB switch. */
50: mov TSB_REG, %o5
stxa %o0, [%o5] ASI_DMMU
membar #Sync
stxa %o0, [%o5] ASI_IMMU
membar #Sync
2: ldx [%o1 + TSB_CONFIG_MAP_VADDR], %o4
brz %o4, 9f
ldx [%o1 + TSB_CONFIG_MAP_PTE], %o5
sethi %hi(sparc64_highest_unlocked_tlb_ent), %g2
mov TLB_TAG_ACCESS, %g3
lduw [%g2 + %lo(sparc64_highest_unlocked_tlb_ent)], %g2
stxa %o4, [%g3] ASI_DMMU
membar #Sync
sllx %g2, 3, %g2
stxa %o5, [%g2] ASI_DTLB_DATA_ACCESS
membar #Sync
brz,pt %o2, 9f
nop
ldx [%o2 + TSB_CONFIG_MAP_VADDR], %o4
ldx [%o2 + TSB_CONFIG_MAP_PTE], %o5
mov TLB_TAG_ACCESS, %g3
stxa %o4, [%g3] ASI_DMMU
membar #Sync
sub %g2, (1 << 3), %g2
stxa %o5, [%g2] ASI_DTLB_DATA_ACCESS
membar #Sync
9:
wrpr %g1, %pstate
retl
nop
.size __tsb_context_switch, .-__tsb_context_switch
#define TSB_PASS_BITS ((1 << TSB_TAG_LOCK_BIT) | \
(1 << TSB_TAG_INVALID_BIT))
.align 32
.globl copy_tsb
.type copy_tsb,#function
copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size
* %o2=new_tsb_base, %o3=new_tsb_size
* %o4=page_size_shift
*/
sethi %uhi(TSB_PASS_BITS), %g7
srlx %o3, 4, %o3
add %o0, %o1, %o1 /* end of old tsb */
sllx %g7, 32, %g7
sub %o3, 1, %o3 /* %o3 == new tsb hash mask */
mov %o4, %g1 /* page_size_shift */
661: prefetcha [%o0] ASI_N, #one_read
.section .tsb_phys_patch, "ax"
.word 661b
prefetcha [%o0] ASI_PHYS_USE_EC, #one_read
.previous
90: andcc %o0, (64 - 1), %g0
bne 1f
add %o0, 64, %o5
661: prefetcha [%o5] ASI_N, #one_read
.section .tsb_phys_patch, "ax"
.word 661b
prefetcha [%o5] ASI_PHYS_USE_EC, #one_read
.previous
1: TSB_LOAD_QUAD(%o0, %g2) /* %g2/%g3 == TSB entry */
andcc %g2, %g7, %g0 /* LOCK or INVALID set? */
bne,pn %xcc, 80f /* Skip it */
sllx %g2, 22, %o4 /* TAG --> VADDR */
/* This can definitely be computed faster... */
srlx %o0, 4, %o5 /* Build index */
and %o5, 511, %o5 /* Mask index */
sllx %o5, %g1, %o5 /* Put into vaddr position */
or %o4, %o5, %o4 /* Full VADDR. */
srlx %o4, %g1, %o4 /* Shift down to create index */
and %o4, %o3, %o4 /* Mask with new_tsb_nents-1 */
sllx %o4, 4, %o4 /* Shift back up into tsb ent offset */
TSB_STORE(%o2 + %o4, %g2) /* Store TAG */
add %o4, 0x8, %o4 /* Advance to TTE */
TSB_STORE(%o2 + %o4, %g3) /* Store TTE */
80: add %o0, 16, %o0
cmp %o0, %o1
bne,pt %xcc, 90b
nop
retl
nop
.size copy_tsb, .-copy_tsb
/* Set the invalid bit in all TSB entries. */
.align 32
.globl tsb_init
.type tsb_init,#function
tsb_init: /* %o0 = TSB vaddr, %o1 = size in bytes */
prefetch [%o0 + 0x000], #n_writes
mov 1, %g1
prefetch [%o0 + 0x040], #n_writes
sllx %g1, TSB_TAG_INVALID_BIT, %g1
prefetch [%o0 + 0x080], #n_writes
1: prefetch [%o0 + 0x0c0], #n_writes
stx %g1, [%o0 + 0x00]
stx %g1, [%o0 + 0x10]
stx %g1, [%o0 + 0x20]
stx %g1, [%o0 + 0x30]
prefetch [%o0 + 0x100], #n_writes
stx %g1, [%o0 + 0x40]
stx %g1, [%o0 + 0x50]
stx %g1, [%o0 + 0x60]
stx %g1, [%o0 + 0x70]
prefetch [%o0 + 0x140], #n_writes
stx %g1, [%o0 + 0x80]
stx %g1, [%o0 + 0x90]
stx %g1, [%o0 + 0xa0]
stx %g1, [%o0 + 0xb0]
prefetch [%o0 + 0x180], #n_writes
stx %g1, [%o0 + 0xc0]
stx %g1, [%o0 + 0xd0]
stx %g1, [%o0 + 0xe0]
stx %g1, [%o0 + 0xf0]
subcc %o1, 0x100, %o1
bne,pt %xcc, 1b
add %o0, 0x100, %o0
retl
nop
nop
nop
.size tsb_init, .-tsb_init
.globl NGtsb_init
.type NGtsb_init,#function
NGtsb_init:
rd %asi, %g2
mov 1, %g1
wr %g0, ASI_BLK_INIT_QUAD_LDD_P, %asi
sllx %g1, TSB_TAG_INVALID_BIT, %g1
1: stxa %g1, [%o0 + 0x00] %asi
stxa %g1, [%o0 + 0x10] %asi
stxa %g1, [%o0 + 0x20] %asi
stxa %g1, [%o0 + 0x30] %asi
stxa %g1, [%o0 + 0x40] %asi
stxa %g1, [%o0 + 0x50] %asi
stxa %g1, [%o0 + 0x60] %asi
stxa %g1, [%o0 + 0x70] %asi
stxa %g1, [%o0 + 0x80] %asi
stxa %g1, [%o0 + 0x90] %asi
stxa %g1, [%o0 + 0xa0] %asi
stxa %g1, [%o0 + 0xb0] %asi
stxa %g1, [%o0 + 0xc0] %asi
stxa %g1, [%o0 + 0xd0] %asi
stxa %g1, [%o0 + 0xe0] %asi
stxa %g1, [%o0 + 0xf0] %asi
subcc %o1, 0x100, %o1
bne,pt %xcc, 1b
add %o0, 0x100, %o0
membar #Sync
retl
wr %g2, 0x0, %asi
.size NGtsb_init, .-NGtsb_init
Reference in New Issue View Git Blame Copy Permalink