forked from Minki/linux
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
265 lines
6.8 KiB
C
265 lines
6.8 KiB
C
/*
|
|
* Sharp SL-C7xx Series PCMCIA routines
|
|
*
|
|
* Copyright (c) 2004-2005 Richard Purdie
|
|
*
|
|
* Based on Sharp's 2.4 kernel patches and pxa2xx_mainstone.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/hardware/scoop.h>
|
|
#include <asm/arch/corgi.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
#include "soc_common.h"
|
|
|
|
#define NO_KEEP_VS 0x0001
|
|
|
|
static unsigned char keep_vs;
|
|
static unsigned char keep_rd;
|
|
|
|
static struct pcmcia_irqs irqs[] = {
|
|
{ 0, CORGI_IRQ_GPIO_CF_CD, "PCMCIA0 CD"},
|
|
};
|
|
|
|
static void sharpsl_pcmcia_init_reset(void)
|
|
{
|
|
reset_scoop(&corgiscoop_device.dev);
|
|
keep_vs = NO_KEEP_VS;
|
|
keep_rd = 0;
|
|
}
|
|
|
|
static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Setup default state of GPIO outputs
|
|
* before we enable them as outputs.
|
|
*/
|
|
GPSR(GPIO48_nPOE) =
|
|
GPIO_bit(GPIO48_nPOE) |
|
|
GPIO_bit(GPIO49_nPWE) |
|
|
GPIO_bit(GPIO50_nPIOR) |
|
|
GPIO_bit(GPIO51_nPIOW) |
|
|
GPIO_bit(GPIO52_nPCE_1) |
|
|
GPIO_bit(GPIO53_nPCE_2);
|
|
|
|
pxa_gpio_mode(GPIO48_nPOE_MD);
|
|
pxa_gpio_mode(GPIO49_nPWE_MD);
|
|
pxa_gpio_mode(GPIO50_nPIOR_MD);
|
|
pxa_gpio_mode(GPIO51_nPIOW_MD);
|
|
pxa_gpio_mode(GPIO52_nPCE_1_MD);
|
|
pxa_gpio_mode(GPIO53_nPCE_2_MD);
|
|
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
|
|
pxa_gpio_mode(GPIO55_nPREG_MD);
|
|
pxa_gpio_mode(GPIO56_nPWAIT_MD);
|
|
pxa_gpio_mode(GPIO57_nIOIS16_MD);
|
|
|
|
/* Register interrupts */
|
|
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
|
|
if (ret) {
|
|
printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Enable interrupt */
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, 0x00C0);
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, 0x0101);
|
|
keep_vs = NO_KEEP_VS;
|
|
|
|
skt->irq = CORGI_IRQ_GPIO_CF_IRQ;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
|
|
{
|
|
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
|
|
/* CF_BUS_OFF */
|
|
sharpsl_pcmcia_init_reset();
|
|
}
|
|
|
|
|
|
static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
|
|
struct pcmcia_state *state)
|
|
{
|
|
unsigned short cpr, csr;
|
|
|
|
cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR);
|
|
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x00FF);
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_ISR, 0x0000);
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_IRM, 0x0000);
|
|
csr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CSR);
|
|
if (csr & 0x0004) {
|
|
/* card eject */
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
|
|
keep_vs = NO_KEEP_VS;
|
|
}
|
|
else if (!(keep_vs & NO_KEEP_VS)) {
|
|
/* keep vs1,vs2 */
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
|
|
csr |= keep_vs;
|
|
}
|
|
else if (cpr & 0x0003) {
|
|
/* power on */
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0000);
|
|
keep_vs = (csr & 0x00C0);
|
|
}
|
|
else {
|
|
/* card detect */
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CDR, 0x0002);
|
|
}
|
|
|
|
state->detect = (csr & 0x0004) ? 0 : 1;
|
|
state->ready = (csr & 0x0002) ? 1 : 0;
|
|
state->bvd1 = (csr & 0x0010) ? 1 : 0;
|
|
state->bvd2 = (csr & 0x0020) ? 1 : 0;
|
|
state->wrprot = (csr & 0x0008) ? 1 : 0;
|
|
state->vs_3v = (csr & 0x0040) ? 0 : 1;
|
|
state->vs_Xv = (csr & 0x0080) ? 0 : 1;
|
|
|
|
if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
|
|
printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
|
|
const socket_state_t *state)
|
|
{
|
|
unsigned long flags;
|
|
|
|
unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
|
|
|
|
switch (state->Vcc) {
|
|
case 0: break;
|
|
case 33: break;
|
|
case 50: break;
|
|
default:
|
|
printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc);
|
|
return -1;
|
|
}
|
|
|
|
if ((state->Vpp!=state->Vcc) && (state->Vpp!=0)) {
|
|
printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp);
|
|
return -1;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
nmcr = (mcr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR)) & ~0x0010;
|
|
ncpr = (cpr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR)) & ~0x0083;
|
|
nccr = (ccr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR)) & ~0x0080;
|
|
nimr = (imr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR)) & ~0x003E;
|
|
|
|
ncpr |= (state->Vcc == 33) ? 0x0001 :
|
|
(state->Vcc == 50) ? 0x0002 : 0;
|
|
nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
|
|
ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
|
|
nccr |= (state->flags&SS_RESET)? 0x0080: 0;
|
|
nimr |= ((skt->status&SS_DETECT) ? 0x0004 : 0)|
|
|
((skt->status&SS_READY) ? 0x0002 : 0)|
|
|
((skt->status&SS_BATDEAD)? 0x0010 : 0)|
|
|
((skt->status&SS_BATWARN)? 0x0020 : 0)|
|
|
((skt->status&SS_STSCHG) ? 0x0010 : 0)|
|
|
((skt->status&SS_WRPROT) ? 0x0008 : 0);
|
|
|
|
if (!(ncpr & 0x0003)) {
|
|
keep_rd = 0;
|
|
} else if (!keep_rd) {
|
|
if (nccr & 0x0080)
|
|
keep_rd = 1;
|
|
else
|
|
nccr |= 0x0080;
|
|
}
|
|
|
|
if (mcr != nmcr)
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_MCR, nmcr);
|
|
if (cpr != ncpr)
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CPR, ncpr);
|
|
if (ccr != nccr)
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_CCR, nccr);
|
|
if (imr != nimr)
|
|
write_scoop_reg(&corgiscoop_device.dev, SCOOP_IMR, nimr);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
}
|
|
|
|
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
|
|
{
|
|
}
|
|
|
|
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
|
|
.owner = THIS_MODULE,
|
|
.hw_init = sharpsl_pcmcia_hw_init,
|
|
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
|
|
.socket_state = sharpsl_pcmcia_socket_state,
|
|
.configure_socket = sharpsl_pcmcia_configure_socket,
|
|
.socket_init = sharpsl_pcmcia_socket_init,
|
|
.socket_suspend = sharpsl_pcmcia_socket_suspend,
|
|
.first = 0,
|
|
.nr = 1,
|
|
};
|
|
|
|
static struct platform_device *sharpsl_pcmcia_device;
|
|
|
|
static int __init sharpsl_pcmcia_init(void)
|
|
{
|
|
int ret;
|
|
|
|
sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
|
|
if (!sharpsl_pcmcia_device)
|
|
return -ENOMEM;
|
|
memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
|
|
sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
|
|
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
|
|
|
|
ret = platform_device_register(sharpsl_pcmcia_device);
|
|
if (ret)
|
|
kfree(sharpsl_pcmcia_device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit sharpsl_pcmcia_exit(void)
|
|
{
|
|
/*
|
|
* This call is supposed to free our sharpsl_pcmcia_device.
|
|
* Unfortunately platform_device don't have a free method, and
|
|
* we can't assume it's free of any reference at this point so we
|
|
* can't free it either.
|
|
*/
|
|
platform_device_unregister(sharpsl_pcmcia_device);
|
|
}
|
|
|
|
module_init(sharpsl_pcmcia_init);
|
|
module_exit(sharpsl_pcmcia_exit);
|
|
|
|
MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
|
|
MODULE_LICENSE("GPL");
|