forked from Minki/linux
1d9f26262a
Properly handle version of the protocol where standard PS/2 packets from trackpoint are stuffed into middle (byte 3-6) of the standard ALPS packets when both the touchpad and trackpoint are used together. The patch is based on work done by Matthew Chapman and additional research done by David Kubicek and Erik Osterholm: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610 Many thanks to David Kubicek for his efforts in researching fine points of this new version of the protocol, especially interaction between pad and stick in these models. Signed-off-by: Sebastian Kapfer <sebastian_kapfer@gmx.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
785 lines
22 KiB
C
785 lines
22 KiB
C
/*
|
|
* ALPS touchpad PS/2 mouse driver
|
|
*
|
|
* Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
|
|
* Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
|
|
* Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
|
|
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
|
|
* Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
|
|
*
|
|
* ALPS detection, tap switching and status querying info is taken from
|
|
* tpconfig utility (by C. Scott Ananian and Bruce Kall).
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/input.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/libps2.h>
|
|
|
|
#include "psmouse.h"
|
|
#include "alps.h"
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg)
|
|
#else
|
|
#define dbg(format, arg...) do {} while (0)
|
|
#endif
|
|
|
|
#define ALPS_OLDPROTO 0x01 /* old style input */
|
|
#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
|
|
#define ALPS_PASS 0x04 /* device has a pass-through port */
|
|
|
|
#define ALPS_WHEEL 0x08 /* hardware wheel present */
|
|
#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
|
|
#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
|
|
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
|
|
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
|
|
6-byte ALPS packet */
|
|
|
|
static const struct alps_model_info alps_model_data[] = {
|
|
{ { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
|
|
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
|
|
{ { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
|
|
{ { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
|
|
{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 }, /* HP ze1115 */
|
|
{ { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
|
|
{ { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
|
|
{ { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */
|
|
{ { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */
|
|
{ { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */
|
|
{ { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 },
|
|
{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
|
|
{ { 0x73, 0x00, 0x0a }, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */
|
|
{ { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
|
|
{ { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */
|
|
{ { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
|
|
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
|
|
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
|
|
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
|
|
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
|
|
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
|
|
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
|
|
};
|
|
|
|
/*
|
|
* XXX - this entry is suspicious. First byte has zero lower nibble,
|
|
* which is what a normal mouse would report. Also, the value 0x0e
|
|
* isn't valid per PS/2 spec.
|
|
*/
|
|
|
|
/*
|
|
* PS/2 packet format
|
|
*
|
|
* byte 0: 0 0 YSGN XSGN 1 M R L
|
|
* byte 1: X7 X6 X5 X4 X3 X2 X1 X0
|
|
* byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
|
*
|
|
* Note that the device never signals overflow condition.
|
|
*
|
|
* ALPS absolute Mode - new format
|
|
*
|
|
* byte 0: 1 ? ? ? 1 ? ? ?
|
|
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
|
* byte 2: 0 x10 x9 x8 x7 ? fin ges
|
|
* byte 3: 0 y9 y8 y7 1 M R L
|
|
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
|
|
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
|
|
*
|
|
* Dualpoint device -- interleaved packet format
|
|
*
|
|
* byte 0: 1 1 0 0 1 1 1 1
|
|
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
|
|
* byte 2: 0 x10 x9 x8 x7 0 fin ges
|
|
* byte 3: 0 0 YSGN XSGN 1 1 1 1
|
|
* byte 4: X7 X6 X5 X4 X3 X2 X1 X0
|
|
* byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
|
|
* byte 6: 0 y9 y8 y7 1 m r l
|
|
* byte 7: 0 y6 y5 y4 y3 y2 y1 y0
|
|
* byte 8: 0 z6 z5 z4 z3 z2 z1 z0
|
|
*
|
|
* CAPITALS = stick, miniscules = touchpad
|
|
*
|
|
* ?'s can have different meanings on different models,
|
|
* such as wheel rotation, extra buttons, stick buttons
|
|
* on a dualpoint, etc.
|
|
*/
|
|
|
|
static bool alps_is_valid_first_byte(const struct alps_model_info *model,
|
|
unsigned char data)
|
|
{
|
|
return (data & model->mask0) == model->byte0;
|
|
}
|
|
|
|
static void alps_report_buttons(struct psmouse *psmouse,
|
|
struct input_dev *dev1, struct input_dev *dev2,
|
|
int left, int right, int middle)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
const struct alps_model_info *model = priv->i;
|
|
|
|
if (model->flags & ALPS_PS2_INTERLEAVED) {
|
|
struct input_dev *dev;
|
|
|
|
/*
|
|
* If shared button has already been reported on the
|
|
* other device (dev2) then this event should be also
|
|
* sent through that device.
|
|
*/
|
|
dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
|
|
input_report_key(dev, BTN_LEFT, left);
|
|
|
|
dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
|
|
input_report_key(dev, BTN_RIGHT, right);
|
|
|
|
dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
|
|
input_report_key(dev, BTN_MIDDLE, middle);
|
|
|
|
/*
|
|
* Sync the _other_ device now, we'll do the first
|
|
* device later once we report the rest of the events.
|
|
*/
|
|
input_sync(dev2);
|
|
} else {
|
|
/*
|
|
* For devices with non-interleaved packets we know what
|
|
* device buttons belong to so we can simply report them.
|
|
*/
|
|
input_report_key(dev1, BTN_LEFT, left);
|
|
input_report_key(dev1, BTN_RIGHT, right);
|
|
input_report_key(dev1, BTN_MIDDLE, middle);
|
|
}
|
|
}
|
|
|
|
static void alps_process_packet(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
const struct alps_model_info *model = priv->i;
|
|
unsigned char *packet = psmouse->packet;
|
|
struct input_dev *dev = psmouse->dev;
|
|
struct input_dev *dev2 = priv->dev2;
|
|
int x, y, z, ges, fin, left, right, middle;
|
|
int back = 0, forward = 0;
|
|
|
|
if (model->flags & ALPS_OLDPROTO) {
|
|
left = packet[2] & 0x10;
|
|
right = packet[2] & 0x08;
|
|
middle = 0;
|
|
x = packet[1] | ((packet[0] & 0x07) << 7);
|
|
y = packet[4] | ((packet[3] & 0x07) << 7);
|
|
z = packet[5];
|
|
} else {
|
|
left = packet[3] & 1;
|
|
right = packet[3] & 2;
|
|
middle = packet[3] & 4;
|
|
x = packet[1] | ((packet[2] & 0x78) << (7 - 3));
|
|
y = packet[4] | ((packet[3] & 0x70) << (7 - 4));
|
|
z = packet[5];
|
|
}
|
|
|
|
if (model->flags & ALPS_FW_BK_1) {
|
|
back = packet[0] & 0x10;
|
|
forward = packet[2] & 4;
|
|
}
|
|
|
|
if (model->flags & ALPS_FW_BK_2) {
|
|
back = packet[3] & 4;
|
|
forward = packet[2] & 4;
|
|
if ((middle = forward && back))
|
|
forward = back = 0;
|
|
}
|
|
|
|
ges = packet[2] & 1;
|
|
fin = packet[2] & 2;
|
|
|
|
if ((model->flags & ALPS_DUALPOINT) && z == 127) {
|
|
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
|
|
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
|
|
|
|
alps_report_buttons(psmouse, dev2, dev, left, right, middle);
|
|
|
|
input_sync(dev2);
|
|
return;
|
|
}
|
|
|
|
alps_report_buttons(psmouse, dev, dev2, left, right, middle);
|
|
|
|
/* Convert hardware tap to a reasonable Z value */
|
|
if (ges && !fin)
|
|
z = 40;
|
|
|
|
/*
|
|
* A "tap and drag" operation is reported by the hardware as a transition
|
|
* from (!fin && ges) to (fin && ges). This should be translated to the
|
|
* sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
|
|
*/
|
|
if (ges && fin && !priv->prev_fin) {
|
|
input_report_abs(dev, ABS_X, x);
|
|
input_report_abs(dev, ABS_Y, y);
|
|
input_report_abs(dev, ABS_PRESSURE, 0);
|
|
input_report_key(dev, BTN_TOOL_FINGER, 0);
|
|
input_sync(dev);
|
|
}
|
|
priv->prev_fin = fin;
|
|
|
|
if (z > 30)
|
|
input_report_key(dev, BTN_TOUCH, 1);
|
|
if (z < 25)
|
|
input_report_key(dev, BTN_TOUCH, 0);
|
|
|
|
if (z > 0) {
|
|
input_report_abs(dev, ABS_X, x);
|
|
input_report_abs(dev, ABS_Y, y);
|
|
}
|
|
|
|
input_report_abs(dev, ABS_PRESSURE, z);
|
|
input_report_key(dev, BTN_TOOL_FINGER, z > 0);
|
|
|
|
if (model->flags & ALPS_WHEEL)
|
|
input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
|
|
|
|
if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
|
|
input_report_key(dev, BTN_FORWARD, forward);
|
|
input_report_key(dev, BTN_BACK, back);
|
|
}
|
|
|
|
if (model->flags & ALPS_FOUR_BUTTONS) {
|
|
input_report_key(dev, BTN_0, packet[2] & 4);
|
|
input_report_key(dev, BTN_1, packet[0] & 0x10);
|
|
input_report_key(dev, BTN_2, packet[3] & 4);
|
|
input_report_key(dev, BTN_3, packet[0] & 0x20);
|
|
}
|
|
|
|
input_sync(dev);
|
|
}
|
|
|
|
static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
|
|
unsigned char packet[],
|
|
bool report_buttons)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
struct input_dev *dev2 = priv->dev2;
|
|
|
|
if (report_buttons)
|
|
alps_report_buttons(psmouse, dev2, psmouse->dev,
|
|
packet[0] & 1, packet[0] & 2, packet[0] & 4);
|
|
|
|
input_report_rel(dev2, REL_X,
|
|
packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
|
|
input_report_rel(dev2, REL_Y,
|
|
packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
|
|
|
|
input_sync(dev2);
|
|
}
|
|
|
|
static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
|
|
if (psmouse->pktcnt < 6)
|
|
return PSMOUSE_GOOD_DATA;
|
|
|
|
if (psmouse->pktcnt == 6) {
|
|
/*
|
|
* Start a timer to flush the packet if it ends up last
|
|
* 6-byte packet in the stream. Timer needs to fire
|
|
* psmouse core times out itself. 20 ms should be enough
|
|
* to decide if we are getting more data or not.
|
|
*/
|
|
mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
|
|
return PSMOUSE_GOOD_DATA;
|
|
}
|
|
|
|
del_timer(&priv->timer);
|
|
|
|
if (psmouse->packet[6] & 0x80) {
|
|
|
|
/*
|
|
* Highest bit is set - that means we either had
|
|
* complete ALPS packet and this is start of the
|
|
* next packet or we got garbage.
|
|
*/
|
|
|
|
if (((psmouse->packet[3] |
|
|
psmouse->packet[4] |
|
|
psmouse->packet[5]) & 0x80) ||
|
|
(!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
|
|
dbg("refusing packet %x %x %x %x "
|
|
"(suspected interleaved ps/2)\n",
|
|
psmouse->packet[3], psmouse->packet[4],
|
|
psmouse->packet[5], psmouse->packet[6]);
|
|
return PSMOUSE_BAD_DATA;
|
|
}
|
|
|
|
alps_process_packet(psmouse);
|
|
|
|
/* Continue with the next packet */
|
|
psmouse->packet[0] = psmouse->packet[6];
|
|
psmouse->pktcnt = 1;
|
|
|
|
} else {
|
|
|
|
/*
|
|
* High bit is 0 - that means that we indeed got a PS/2
|
|
* packet in the middle of ALPS packet.
|
|
*
|
|
* There is also possibility that we got 6-byte ALPS
|
|
* packet followed by 3-byte packet from trackpoint. We
|
|
* can not distinguish between these 2 scenarios but
|
|
* becase the latter is unlikely to happen in course of
|
|
* normal operation (user would need to press all
|
|
* buttons on the pad and start moving trackpoint
|
|
* without touching the pad surface) we assume former.
|
|
* Even if we are wrong the wost thing that would happen
|
|
* the cursor would jump but we should not get protocol
|
|
* desynchronization.
|
|
*/
|
|
|
|
alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
|
|
false);
|
|
|
|
/*
|
|
* Continue with the standard ALPS protocol handling,
|
|
* but make sure we won't process it as an interleaved
|
|
* packet again, which may happen if all buttons are
|
|
* pressed. To avoid this let's reset the 4th bit which
|
|
* is normally 1.
|
|
*/
|
|
psmouse->packet[3] = psmouse->packet[6] & 0xf7;
|
|
psmouse->pktcnt = 4;
|
|
}
|
|
|
|
return PSMOUSE_GOOD_DATA;
|
|
}
|
|
|
|
static void alps_flush_packet(unsigned long data)
|
|
{
|
|
struct psmouse *psmouse = (struct psmouse *)data;
|
|
|
|
serio_pause_rx(psmouse->ps2dev.serio);
|
|
|
|
if (psmouse->pktcnt == 6) {
|
|
|
|
/*
|
|
* We did not any more data in reasonable amount of time.
|
|
* Validate the last 3 bytes and process as a standard
|
|
* ALPS packet.
|
|
*/
|
|
if ((psmouse->packet[3] |
|
|
psmouse->packet[4] |
|
|
psmouse->packet[5]) & 0x80) {
|
|
dbg("refusing packet %x %x %x "
|
|
"(suspected interleaved ps/2)\n",
|
|
psmouse->packet[3], psmouse->packet[4],
|
|
psmouse->packet[5]);
|
|
} else {
|
|
alps_process_packet(psmouse);
|
|
}
|
|
psmouse->pktcnt = 0;
|
|
}
|
|
|
|
serio_continue_rx(psmouse->ps2dev.serio);
|
|
}
|
|
|
|
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
const struct alps_model_info *model = priv->i;
|
|
|
|
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
|
|
if (psmouse->pktcnt == 3) {
|
|
alps_report_bare_ps2_packet(psmouse, psmouse->packet,
|
|
true);
|
|
return PSMOUSE_FULL_PACKET;
|
|
}
|
|
return PSMOUSE_GOOD_DATA;
|
|
}
|
|
|
|
/* Check for PS/2 packet stuffed in the middle of ALPS packet. */
|
|
|
|
if ((model->flags & ALPS_PS2_INTERLEAVED) &&
|
|
psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
|
|
return alps_handle_interleaved_ps2(psmouse);
|
|
}
|
|
|
|
if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
|
|
dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
|
|
psmouse->packet[0], model->mask0, model->byte0);
|
|
return PSMOUSE_BAD_DATA;
|
|
}
|
|
|
|
/* Bytes 2 - 6 should have 0 in the highest bit */
|
|
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
|
|
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
|
|
dbg("refusing packet[%i] = %x\n",
|
|
psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
|
|
return PSMOUSE_BAD_DATA;
|
|
}
|
|
|
|
if (psmouse->pktcnt == 6) {
|
|
alps_process_packet(psmouse);
|
|
return PSMOUSE_FULL_PACKET;
|
|
}
|
|
|
|
return PSMOUSE_GOOD_DATA;
|
|
}
|
|
|
|
static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
|
|
unsigned char param[4];
|
|
int i;
|
|
|
|
/*
|
|
* First try "E6 report".
|
|
* ALPS should return 0,0,10 or 0,0,100
|
|
*/
|
|
param[0] = 0;
|
|
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11))
|
|
return NULL;
|
|
|
|
param[0] = param[1] = param[2] = 0xff;
|
|
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
|
|
return NULL;
|
|
|
|
dbg("E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
|
|
|
|
if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
|
|
return NULL;
|
|
|
|
/*
|
|
* Now try "E7 report". Allowed responses are in
|
|
* alps_model_data[].signature
|
|
*/
|
|
param[0] = 0;
|
|
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21))
|
|
return NULL;
|
|
|
|
param[0] = param[1] = param[2] = 0xff;
|
|
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
|
|
return NULL;
|
|
|
|
dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
|
|
|
|
if (version) {
|
|
for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
|
|
/* empty */;
|
|
*version = (param[0] << 8) | (param[1] << 4) | i;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
|
|
if (!memcmp(param, alps_model_data[i].signature,
|
|
sizeof(alps_model_data[i].signature)))
|
|
return alps_model_data + i;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* For DualPoint devices select the device that should respond to
|
|
* subsequent commands. It looks like glidepad is behind stickpointer,
|
|
* I'd thought it would be other way around...
|
|
*/
|
|
static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
|
|
|
|
if (ps2_command(ps2dev, NULL, cmd) ||
|
|
ps2_command(ps2dev, NULL, cmd) ||
|
|
ps2_command(ps2dev, NULL, cmd) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
|
|
return -1;
|
|
|
|
/* we may get 3 more bytes, just ignore them */
|
|
ps2_drain(ps2dev, 3, 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int alps_absolute_mode(struct psmouse *psmouse)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
|
|
/* Try ALPS magic knock - 4 disable before enable */
|
|
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
|
|
return -1;
|
|
|
|
/*
|
|
* Switch mouse to poll (remote) mode so motion data will not
|
|
* get in our way
|
|
*/
|
|
return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
|
|
}
|
|
|
|
static int alps_get_status(struct psmouse *psmouse, char *param)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
|
|
/* Get status: 0xF5 0xF5 0xF5 0xE9 */
|
|
if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
|
|
return -1;
|
|
|
|
dbg("Status: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Turn touchpad tapping on or off. The sequences are:
|
|
* 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
|
|
* 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
|
|
* My guess that 0xE9 (GetInfo) is here as a sync point.
|
|
* For models that also have stickpointer (DualPoints) its tapping
|
|
* is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
|
|
* we don't fiddle with it.
|
|
*/
|
|
static int alps_tap_mode(struct psmouse *psmouse, int enable)
|
|
{
|
|
struct ps2dev *ps2dev = &psmouse->ps2dev;
|
|
int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES;
|
|
unsigned char tap_arg = enable ? 0x0A : 0x00;
|
|
unsigned char param[4];
|
|
|
|
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
|
|
ps2_command(ps2dev, &tap_arg, cmd))
|
|
return -1;
|
|
|
|
if (alps_get_status(psmouse, param))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* alps_poll() - poll the touchpad for current motion packet.
|
|
* Used in resync.
|
|
*/
|
|
static int alps_poll(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
unsigned char buf[6];
|
|
bool poll_failed;
|
|
|
|
if (priv->i->flags & ALPS_PASS)
|
|
alps_passthrough_mode(psmouse, true);
|
|
|
|
poll_failed = ps2_command(&psmouse->ps2dev, buf,
|
|
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
|
|
|
|
if (priv->i->flags & ALPS_PASS)
|
|
alps_passthrough_mode(psmouse, false);
|
|
|
|
if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
|
|
return -1;
|
|
|
|
if ((psmouse->badbyte & 0xc8) == 0x08) {
|
|
/*
|
|
* Poll the track stick ...
|
|
*/
|
|
if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
|
|
return -1;
|
|
}
|
|
|
|
memcpy(psmouse->packet, buf, sizeof(buf));
|
|
return 0;
|
|
}
|
|
|
|
static int alps_hw_init(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
const struct alps_model_info *model = priv->i;
|
|
|
|
if ((model->flags & ALPS_PASS) &&
|
|
alps_passthrough_mode(psmouse, true)) {
|
|
return -1;
|
|
}
|
|
|
|
if (alps_tap_mode(psmouse, true)) {
|
|
printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
|
|
return -1;
|
|
}
|
|
|
|
if (alps_absolute_mode(psmouse)) {
|
|
printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
|
|
return -1;
|
|
}
|
|
|
|
if ((model->flags & ALPS_PASS) &&
|
|
alps_passthrough_mode(psmouse, false)) {
|
|
return -1;
|
|
}
|
|
|
|
/* ALPS needs stream mode, otherwise it won't report any data */
|
|
if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
|
|
printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int alps_reconnect(struct psmouse *psmouse)
|
|
{
|
|
const struct alps_model_info *model;
|
|
|
|
psmouse_reset(psmouse);
|
|
|
|
model = alps_get_model(psmouse, NULL);
|
|
if (!model)
|
|
return -1;
|
|
|
|
return alps_hw_init(psmouse);
|
|
}
|
|
|
|
static void alps_disconnect(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv = psmouse->private;
|
|
|
|
psmouse_reset(psmouse);
|
|
del_timer_sync(&priv->timer);
|
|
input_unregister_device(priv->dev2);
|
|
kfree(priv);
|
|
}
|
|
|
|
int alps_init(struct psmouse *psmouse)
|
|
{
|
|
struct alps_data *priv;
|
|
const struct alps_model_info *model;
|
|
struct input_dev *dev1 = psmouse->dev, *dev2;
|
|
int version;
|
|
|
|
priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
|
|
dev2 = input_allocate_device();
|
|
if (!priv || !dev2)
|
|
goto init_fail;
|
|
|
|
priv->dev2 = dev2;
|
|
setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
|
|
|
|
psmouse->private = priv;
|
|
|
|
model = alps_get_model(psmouse, &version);
|
|
if (!model)
|
|
goto init_fail;
|
|
|
|
priv->i = model;
|
|
|
|
if (alps_hw_init(psmouse))
|
|
goto init_fail;
|
|
|
|
/*
|
|
* Undo part of setup done for us by psmouse core since touchpad
|
|
* is not a relative device.
|
|
*/
|
|
__clear_bit(EV_REL, dev1->evbit);
|
|
__clear_bit(REL_X, dev1->relbit);
|
|
__clear_bit(REL_Y, dev1->relbit);
|
|
|
|
/*
|
|
* Now set up our capabilities.
|
|
*/
|
|
dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
|
|
dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
|
|
dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
|
|
dev1->keybit[BIT_WORD(BTN_LEFT)] |=
|
|
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
|
|
|
|
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
|
|
input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
|
|
input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
|
|
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
|
|
|
|
if (model->flags & ALPS_WHEEL) {
|
|
dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
|
|
dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
|
|
}
|
|
|
|
if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
|
|
dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
|
|
dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
|
|
}
|
|
|
|
if (model->flags & ALPS_FOUR_BUTTONS) {
|
|
dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
|
|
dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
|
|
dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
|
|
dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
|
|
} else {
|
|
dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
|
|
}
|
|
|
|
snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
|
|
dev2->phys = priv->phys;
|
|
dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
|
|
dev2->id.bustype = BUS_I8042;
|
|
dev2->id.vendor = 0x0002;
|
|
dev2->id.product = PSMOUSE_ALPS;
|
|
dev2->id.version = 0x0000;
|
|
dev2->dev.parent = &psmouse->ps2dev.serio->dev;
|
|
|
|
dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
|
|
dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
|
|
dev2->keybit[BIT_WORD(BTN_LEFT)] =
|
|
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
|
|
|
|
if (input_register_device(priv->dev2))
|
|
goto init_fail;
|
|
|
|
psmouse->protocol_handler = alps_process_byte;
|
|
psmouse->poll = alps_poll;
|
|
psmouse->disconnect = alps_disconnect;
|
|
psmouse->reconnect = alps_reconnect;
|
|
psmouse->pktsize = 6;
|
|
|
|
/* We are having trouble resyncing ALPS touchpads so disable it for now */
|
|
psmouse->resync_time = 0;
|
|
|
|
return 0;
|
|
|
|
init_fail:
|
|
psmouse_reset(psmouse);
|
|
input_free_device(dev2);
|
|
kfree(priv);
|
|
psmouse->private = NULL;
|
|
return -1;
|
|
}
|
|
|
|
int alps_detect(struct psmouse *psmouse, bool set_properties)
|
|
{
|
|
int version;
|
|
const struct alps_model_info *model;
|
|
|
|
model = alps_get_model(psmouse, &version);
|
|
if (!model)
|
|
return -1;
|
|
|
|
if (set_properties) {
|
|
psmouse->vendor = "ALPS";
|
|
psmouse->name = model->flags & ALPS_DUALPOINT ?
|
|
"DualPoint TouchPad" : "GlidePoint";
|
|
psmouse->model = version;
|
|
}
|
|
return 0;
|
|
}
|
|
|