.. |
gl860
|
V4L/DVB(12993b): gl860: Prevent a potential risk of zeroing a floating pointer
|
2009-09-19 00:49:11 -03:00 |
m5602
|
V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528
|
2009-11-07 12:55:12 -02:00 |
stv06xx
|
V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame
|
2009-11-07 12:55:05 -02:00 |
conex.c
|
V4L/DVB (12478): ARRAY_SIZE changes
|
2009-09-12 12:19:05 -03:00 |
etoms.c
|
V4L/DVB (12478): ARRAY_SIZE changes
|
2009-09-12 12:19:05 -03:00 |
finepix.c
|
V4L/DVB (11710): gspca - main: Webcams cannot do both isoc and bulk image transfers.
|
2009-06-16 18:20:54 -03:00 |
gspca.c
|
const: mark struct vm_struct_operations
|
2009-09-27 11:39:25 -07:00 |
gspca.h
|
V4L/DVB (12229): gspca - main: Change the ISOC initialization mechanism.
|
2009-09-12 12:17:37 -03:00 |
jeilinj.c
|
V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start()
|
2009-09-19 00:53:30 -03:00 |
jpeg.h
|
V4L/DVB (11039): gspca - most jpeg subdrivers: Change the JPEG header creation.
|
2009-03-30 12:43:22 -03:00 |
Kconfig
|
V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams
|
2009-09-19 00:15:36 -03:00 |
Makefile
|
V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams
|
2009-09-19 00:15:36 -03:00 |
mars.c
|
V4L/DVB (12284): gspca - jpeg subdrivers: Check the result of kmalloc(jpeg header).
|
2009-07-24 14:03:30 -03:00 |
mr97310a.c
|
V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams
|
2009-11-07 12:55:12 -02:00 |
ov519.c
|
V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame
|
2009-11-07 12:55:05 -02:00 |
ov534.c
|
V4L/DVB (11973): gspca - ov534: Do the ov772x work again.
|
2009-06-16 19:07:44 -03:00 |
pac207.c
|
V4L/DVB (12617): gspca_pac207: enable higher framerates / lower exposure settings
|
2009-09-12 12:19:53 -03:00 |
pac7311.c
|
V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added.
|
2009-09-12 12:20:04 -03:00 |
pac_common.h
|
V4L/DVB (8825): gspca: More controls for pac73xx and new webcam 093a:2624.
|
2008-09-03 18:37:38 -03:00 |
sn9c20x.c
|
V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111
|
2009-09-12 12:20:14 -03:00 |
sonixb.c
|
V4L/DVB (11715): gspca - main: Set the number of packets per ISOC message.
|
2009-06-16 18:20:55 -03:00 |
sonixj.c
|
V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e.
|
2009-09-12 12:20:10 -03:00 |
spca500.c
|
V4L/DVB (12284): gspca - jpeg subdrivers: Check the result of kmalloc(jpeg header).
|
2009-07-24 14:03:30 -03:00 |
spca501.c
|
V4L/DVB (12478): ARRAY_SIZE changes
|
2009-09-12 12:19:05 -03:00 |
spca505.c
|
V4L/DVB (11969): gspca - spca505: Reinitialize the webcam at resume time.
|
2009-06-16 19:07:42 -03:00 |
spca506.c
|
V4L/DVB (12478): ARRAY_SIZE changes
|
2009-09-12 12:19:05 -03:00 |
spca508.c
|
V4L/DVB (12226): gspca - spca508: Extend the write_vector routine.
|
2009-09-12 12:17:33 -03:00 |
spca561.c
|
V4L/DVB (11872): gspca - spca561: Rename the 'White Balance' control to 'Hue'.
|
2009-06-16 18:21:15 -03:00 |
sq905.c
|
V4L/DVB (11710): gspca - main: Webcams cannot do both isoc and bulk image transfers.
|
2009-06-16 18:20:54 -03:00 |
sq905c.c
|
V4L/DVB (11710): gspca - main: Webcams cannot do both isoc and bulk image transfers.
|
2009-06-16 18:20:54 -03:00 |
stk014.c
|
V4L/DVB (12284): gspca - jpeg subdrivers: Check the result of kmalloc(jpeg header).
|
2009-07-24 14:03:30 -03:00 |
sunplus.c
|
V4L/DVB (12693): gspca - sunplus: The brightness is signed.
|
2009-09-12 12:20:08 -03:00 |
t613.c
|
V4L/DVB (12230): gspca - t613: Change tas5130a init sequences.
|
2009-09-12 12:17:37 -03:00 |
tv8532.c
|
V4L/DVB (12357): gspca - tv8532: Bad ISOC packet scan
|
2009-09-12 12:18:20 -03:00 |
vc032x.c
|
V4L/DVB (12953): gspca - vc032x: Bad GPIO of the Samsung Q1 on start/stop streaming.
|
2009-09-19 00:15:34 -03:00 |
zc3xx-reg.h
|
V4L/DVB (9868): gspca - zc3xx: Remove the duplicated register names
|
2008-12-30 09:38:58 -02:00 |
zc3xx.c
|
V4L/DVB (13114): gspca - zc3xx.c: Bad init sequences of sensor cs2102.
|
2009-12-05 18:40:24 -02:00 |