forked from Minki/linux
9e54eae23b
imx6q contains one Synopsys AHCI SATA controller, But it can't share ahci_platform driver with other controllers because there are some misalignments of the generic AHCI controller - the bits definitions of the HBA registers, the Vendor Specific registers, the AHCI PHY clock and the AHCI signals adjustment window(GPR13 register). - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', should be configured to be '1' - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL should be set to be '1'.(default 0) - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be configured regarding to the frequency of AHB bus clock. - Configurations of the AHCI PHY clock, and the signal parameters of the GPR13 Setup its own ahci sata driver, contained the imx6q specific initialized codes, re-use the generic ahci_platform driver, and keep the generic ahci_platform driver clean as much as possible. tj: patch description reformatted Signed-off-by: Richard Zhu <r65037@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
237 lines
6.3 KiB
C
237 lines
6.3 KiB
C
/*
|
|
* Freescale IMX AHCI SATA platform driver
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
#include "ahci.h"
|
|
|
|
enum {
|
|
HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
|
|
};
|
|
|
|
struct imx_ahci_priv {
|
|
struct platform_device *ahci_pdev;
|
|
struct clk *sata_ref_clk;
|
|
struct clk *ahb_clk;
|
|
struct regmap *gpr;
|
|
};
|
|
|
|
static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
|
|
{
|
|
int ret = 0;
|
|
unsigned int reg_val;
|
|
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
|
|
|
imxpriv->gpr =
|
|
syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
|
|
if (IS_ERR(imxpriv->gpr)) {
|
|
dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
|
|
return PTR_ERR(imxpriv->gpr);
|
|
}
|
|
|
|
ret = clk_prepare_enable(imxpriv->sata_ref_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* set PHY Paremeters, two steps to configure the GPR13,
|
|
* one write for rest of parameters, mask of first write
|
|
* is 0x07fffffd, and the other one write for setting
|
|
* the mpll_clk_en.
|
|
*/
|
|
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
|
|
| IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
|
|
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
|
|
| IMX6Q_GPR13_SATA_SPD_MODE_MASK
|
|
| IMX6Q_GPR13_SATA_MPLL_SS_EN
|
|
| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
|
|
| IMX6Q_GPR13_SATA_TX_BOOST_MASK
|
|
| IMX6Q_GPR13_SATA_TX_LVL_MASK
|
|
| IMX6Q_GPR13_SATA_TX_EDGE_RATE
|
|
, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
|
|
| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
|
|
| IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
|
|
| IMX6Q_GPR13_SATA_SPD_MODE_3P0G
|
|
| IMX6Q_GPR13_SATA_MPLL_SS_EN
|
|
| IMX6Q_GPR13_SATA_TX_ATTEN_9_16
|
|
| IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
|
|
| IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
|
|
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
|
IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
|
usleep_range(100, 200);
|
|
|
|
/*
|
|
* Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
|
|
* and IP vendor specific register HOST_TIMER1MS.
|
|
* Configure CAP_SSS (support stagered spin up).
|
|
* Implement the port0.
|
|
* Get the ahb clock rate, and configure the TIMER1MS register.
|
|
*/
|
|
reg_val = readl(mmio + HOST_CAP);
|
|
if (!(reg_val & HOST_CAP_SSS)) {
|
|
reg_val |= HOST_CAP_SSS;
|
|
writel(reg_val, mmio + HOST_CAP);
|
|
}
|
|
reg_val = readl(mmio + HOST_PORTS_IMPL);
|
|
if (!(reg_val & 0x1)) {
|
|
reg_val |= 0x1;
|
|
writel(reg_val, mmio + HOST_PORTS_IMPL);
|
|
}
|
|
|
|
reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
|
|
writel(reg_val, mmio + HOST_TIMER1MS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void imx6q_sata_exit(struct device *dev)
|
|
{
|
|
struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
|
|
|
|
regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
|
|
!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
|
|
clk_disable_unprepare(imxpriv->sata_ref_clk);
|
|
}
|
|
|
|
static struct ahci_platform_data imx6q_sata_pdata = {
|
|
.init = imx6q_sata_init,
|
|
.exit = imx6q_sata_exit,
|
|
};
|
|
|
|
static const struct of_device_id imx_ahci_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
|
|
|
|
static int imx_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *mem, *irq, res[2];
|
|
const struct of_device_id *of_id;
|
|
const struct ahci_platform_data *pdata = NULL;
|
|
struct imx_ahci_priv *imxpriv;
|
|
struct device *ahci_dev;
|
|
struct platform_device *ahci_pdev;
|
|
int ret;
|
|
|
|
imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
|
|
if (!imxpriv) {
|
|
dev_err(dev, "can't alloc ahci_host_priv\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ahci_pdev = platform_device_alloc("ahci", -1);
|
|
if (!ahci_pdev)
|
|
return -ENODEV;
|
|
|
|
ahci_dev = &ahci_pdev->dev;
|
|
ahci_dev->parent = dev;
|
|
|
|
imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
|
|
if (IS_ERR(imxpriv->ahb_clk)) {
|
|
dev_err(dev, "can't get ahb clock.\n");
|
|
ret = PTR_ERR(imxpriv->ahb_clk);
|
|
goto err_out;
|
|
}
|
|
|
|
imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
|
|
if (IS_ERR(imxpriv->sata_ref_clk)) {
|
|
dev_err(dev, "can't get sata_ref clock.\n");
|
|
ret = PTR_ERR(imxpriv->sata_ref_clk);
|
|
goto err_out;
|
|
}
|
|
|
|
imxpriv->ahci_pdev = ahci_pdev;
|
|
platform_set_drvdata(pdev, imxpriv);
|
|
|
|
of_id = of_match_device(imx_ahci_of_match, dev);
|
|
if (of_id) {
|
|
pdata = of_id->data;
|
|
} else {
|
|
ret = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!mem || !irq) {
|
|
dev_err(dev, "no mmio/irq resource\n");
|
|
ret = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
res[0] = *mem;
|
|
res[1] = *irq;
|
|
|
|
ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
|
|
ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
|
|
ahci_dev->of_node = dev->of_node;
|
|
|
|
ret = platform_device_add_resources(ahci_pdev, res, 2);
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
ret = platform_device_add(ahci_pdev);
|
|
if (ret) {
|
|
err_out:
|
|
platform_device_put(ahci_pdev);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_ahci_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
|
|
struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
|
|
|
|
platform_device_unregister(ahci_pdev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver imx_ahci_driver = {
|
|
.probe = imx_ahci_probe,
|
|
.remove = imx_ahci_remove,
|
|
.driver = {
|
|
.name = "ahci-imx",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx_ahci_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(imx_ahci_driver);
|
|
|
|
MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
|
|
MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("ahci:imx");
|