forked from Minki/linux
2ae4dad352
The Power Sleep Controller (PSC) module contains specific memory-mapped registers that can be used to perform reset management using specific bits for the DSPs available on the SoC. The PSC is defined using a syscon node, and the reset functionality is defined using a child syscon reset controller node. Add this syscon reset controller node as well as the reset control data for the resets it supports for the 66AK2L SoCs. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
290 lines
7.5 KiB
Plaintext
290 lines
7.5 KiB
Plaintext
/*
|
|
* Copyright 2014 Texas Instruments, Inc.
|
|
*
|
|
* Keystone 2 Lamarr SoC specific device tree
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <dt-bindings/reset/ti-syscon.h>
|
|
|
|
/ {
|
|
compatible = "ti,k2l", "ti,keystone";
|
|
model = "Texas Instruments Keystone 2 Lamarr SoC";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a15";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "arm,cortex-a15";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
/include/ "keystone-k2l-clocks.dtsi"
|
|
|
|
uart2: serial@02348400 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
current-speed = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
reg = <0x02348400 0x100>;
|
|
clocks = <&clkuart2>;
|
|
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
uart3: serial@02348800 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
current-speed = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
reg = <0x02348800 0x100>;
|
|
clocks = <&clkuart3>;
|
|
interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
k2l_pmx: pinmux@02620690 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x02620690 0xc>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#pinctrl-cells = <2>;
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
status = "disabled";
|
|
|
|
uart3_emifa_pins: pinmux_uart3_emifa_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART3_EMIFA_SEL */
|
|
0x0 0x0 0xc0
|
|
>;
|
|
};
|
|
|
|
uart2_emifa_pins: pinmux_uart2_emifa_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART2_EMIFA_SEL */
|
|
0x0 0x0 0x30
|
|
>;
|
|
};
|
|
|
|
uart01_spi2_pins: pinmux_uart01_spi2_pins {
|
|
pinctrl-single,bits = <
|
|
/* UART01_SPI2_SEL */
|
|
0x0 0x0 0x4
|
|
>;
|
|
};
|
|
|
|
dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
|
|
pinctrl-single,bits = <
|
|
/* DFESYNC_RP1_SEL */
|
|
0x0 0x0 0x2
|
|
>;
|
|
};
|
|
|
|
avsif_pins: pinmux_avsif_pins {
|
|
pinctrl-single,bits = <
|
|
/* AVSIF_SEL */
|
|
0x0 0x0 0x1
|
|
>;
|
|
};
|
|
|
|
gpio_emu_pins: pinmux_gpio_emu_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
|
|
* GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
|
|
* GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
|
|
* GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
|
|
* GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
|
|
* GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
|
|
* GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
|
|
* GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
|
|
* GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
|
|
* GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
|
|
* GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
|
|
* GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
|
|
* GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
|
|
* GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
|
|
* GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
|
|
*/
|
|
0x4 0x0000 0xFFFE0000
|
|
>;
|
|
};
|
|
|
|
gpio_timio_pins: pinmux_gpio_timio_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
|
|
* GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
|
|
* GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
|
|
* GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
|
|
* GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
|
|
* GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
|
|
* GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
|
|
* GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
|
|
* GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
|
|
* GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
|
|
* GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
|
|
* GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
|
|
*/
|
|
0x4 0x0 0xFFF0
|
|
>;
|
|
};
|
|
|
|
gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
|
|
* GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
|
|
* GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
|
|
* GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
|
|
*/
|
|
0x4 0x0 0xF
|
|
>;
|
|
};
|
|
|
|
gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
|
|
* GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
|
|
* GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
|
|
* GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
|
|
* GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
|
|
* GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
|
|
* GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
|
|
* GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
|
|
* GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
|
|
* GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
|
|
* GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
|
|
* GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
|
|
* GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
|
|
* GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
|
|
* GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
|
|
* GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
|
|
*/
|
|
0x8 0x0 0xFFFF0000
|
|
>;
|
|
};
|
|
|
|
gpio_emifa_pins: pinmux_gpio_emifa_pins {
|
|
pinctrl-single,bits = <
|
|
/*
|
|
* GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
|
|
* GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
|
|
* GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
|
|
* GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
|
|
* GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
|
|
* GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
|
|
* GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
|
|
* GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
|
|
* GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
|
|
* GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
|
|
* GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
|
|
* GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
|
|
* GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
|
|
* GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
|
|
* GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
|
|
* GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
|
|
*/
|
|
0x8 0x0 0xFFFF
|
|
>;
|
|
};
|
|
};
|
|
|
|
msm_ram: msmram@0c000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0c000000 0x200000>;
|
|
ranges = <0x0 0x0c000000 0x200000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sram-bm@1f8000 {
|
|
reg = <0x001f8000 0x8000>;
|
|
};
|
|
};
|
|
|
|
psc: power-sleep-controller@02350000 {
|
|
pscrst: reset-controller {
|
|
compatible = "ti,k2l-pscrst", "ti,syscon-reset";
|
|
#reset-cells = <1>;
|
|
|
|
ti,reset-bits = <
|
|
0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */
|
|
0xa40 8 0xa40 8 0x840 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 1: dsp1 */
|
|
0xa44 8 0xa44 8 0x844 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 2: dsp2 */
|
|
0xa48 8 0xa48 8 0x848 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 3: dsp3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
dspgpio0: keystone_dsp_gpio@02620240 {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio,syscon-dev = <&devctrl 0x240>;
|
|
};
|
|
|
|
dspgpio1: keystone_dsp_gpio@2620244 {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio,syscon-dev = <&devctrl 0x244>;
|
|
};
|
|
|
|
dspgpio2: keystone_dsp_gpio@2620248 {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio,syscon-dev = <&devctrl 0x248>;
|
|
};
|
|
|
|
dspgpio3: keystone_dsp_gpio@262024c {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio,syscon-dev = <&devctrl 0x24c>;
|
|
};
|
|
|
|
mdio: mdio@26200f00 {
|
|
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x26200f00 0x100>;
|
|
status = "disabled";
|
|
clocks = <&clkcpgmac>;
|
|
clock-names = "fck";
|
|
bus_freq = <2500000>;
|
|
};
|
|
/include/ "keystone-k2l-netcp.dtsi"
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
ti,davinci-spi-num-cs = <5>;
|
|
};
|
|
|
|
&spi1 {
|
|
ti,davinci-spi-num-cs = <3>;
|
|
};
|
|
|
|
&spi2 {
|
|
ti,davinci-spi-num-cs = <5>;
|
|
/* Pin muxed. Enabled and configured by Bootloader */
|
|
status = "disabled";
|
|
};
|