forked from Minki/linux
278cb79cc1
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
570 lines
14 KiB
Plaintext
570 lines
14 KiB
Plaintext
/*
|
|
* am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
|
|
*
|
|
* Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "am33xx.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
model = "CompuLab CM-T335";
|
|
compatible = "compulab,cm-t335", "ti,am33xx";
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x8000000>; /* 128 MB */
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_led_pins>;
|
|
led0 {
|
|
label = "cm_t335:green";
|
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
/* regulator for mmc */
|
|
vmmc_fixed: fixedregulator0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmc_fixed";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
/* Regulator for WiFi */
|
|
vwlan_fixed: fixedregulator2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vwlan_fixed";
|
|
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
|
|
enable-active-high;
|
|
regulator-boot-off;
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&ecap0 0 50000 0>;
|
|
brightness-levels = <0 51 53 56 62 75 101 152 255>;
|
|
default-brightness-level = <8>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "cm-t335";
|
|
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Mic Jack",
|
|
"Line", "Line In",
|
|
"Headphone", "Headphone Jack";
|
|
|
|
simple-audio-card,routing =
|
|
"Headphone Jack", "LHPOUT",
|
|
"Headphone Jack", "RHPOUT",
|
|
"LLINEIN", "Line In",
|
|
"RLINEIN", "Line In",
|
|
"MICIN", "Mic Jack";
|
|
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,bitclock-master = <&sound_master>;
|
|
simple-audio-card,frame-master = <&sound_master>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&mcasp1>;
|
|
};
|
|
|
|
sound_master: simple-audio-card,codec {
|
|
sound-dai = <&tlv320aic23>;
|
|
system-clock-frequency = <12000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&am33xx_pinmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bluetooth_pins>;
|
|
|
|
i2c0_pins: pinmux_i2c0_pins {
|
|
pinctrl-single,pins = <
|
|
/* i2c0_sda.i2c0_sda */
|
|
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* i2c0_scl.i2c0_scl */
|
|
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
pinctrl-single,pins = <
|
|
/* uart0_ctsn.i2c1_sda */
|
|
AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
|
|
/* uart0_rtsn.i2c1_scl */
|
|
AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
|
|
>;
|
|
};
|
|
|
|
gpio_led_pins: pinmux_gpio_led_pins {
|
|
pinctrl-single,pins = <
|
|
/* gpmc_csn3.gpio2_0 */
|
|
AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
nandflash_pins: pinmux_nandflash_pins {
|
|
pinctrl-single,pins = <
|
|
/* gpmc_ad0.gpmc_ad0 */
|
|
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad1.gpmc_ad1 */
|
|
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad2.gpmc_ad2 */
|
|
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad3.gpmc_ad3 */
|
|
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad4.gpmc_ad4 */
|
|
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad5.gpmc_ad5 */
|
|
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad6.gpmc_ad6 */
|
|
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_ad7.gpmc_ad7 */
|
|
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_wait0.gpmc_wait0 */
|
|
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* gpmc_wpn.gpio0_30 */
|
|
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
/* gpmc_csn0.gpmc_csn0 */
|
|
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
|
|
/* gpmc_advn_ale.gpmc_advn_ale */
|
|
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
|
|
/* gpmc_oen_ren.gpmc_oen_ren */
|
|
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
|
|
/* gpmc_wen.gpmc_wen */
|
|
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
|
|
/* gpmc_ben0_cle.gpmc_ben0_cle */
|
|
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart0_pins: pinmux_uart0_pins {
|
|
pinctrl-single,pins = <
|
|
/* uart0_rxd.uart0_rxd */
|
|
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* uart0_txd.uart0_txd */
|
|
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart1_pins: pinmux_uart1_pins {
|
|
pinctrl-single,pins = <
|
|
/* uart1_ctsn.uart1_ctsn */
|
|
AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
|
|
/* uart1_rtsn.uart1_rtsn */
|
|
AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
/* uart1_rxd.uart1_rxd */
|
|
AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* uart1_txd.uart1_txd */
|
|
AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
dcan0_pins: pinmux_dcan0_pins {
|
|
pinctrl-single,pins = <
|
|
/* uart1_ctsn.dcan0_tx */
|
|
AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
|
|
/* uart1_rtsn.dcan0_rx */
|
|
AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
|
|
>;
|
|
};
|
|
|
|
dcan1_pins: pinmux_dcan1_pins {
|
|
pinctrl-single,pins = <
|
|
/* uart1_rxd.dcan1_tx */
|
|
AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
|
|
/* uart1_txd.dcan1_rx */
|
|
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
|
|
>;
|
|
};
|
|
|
|
ecap0_pins: pinmux_ecap0_pins {
|
|
pinctrl-single,pins = <
|
|
/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
|
|
AM33XX_IOPAD(0x964, 0x0)
|
|
>;
|
|
};
|
|
|
|
cpsw_default: cpsw_default {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 */
|
|
/* mii1_tx_en.rgmii1_tctl */
|
|
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxdv.rgmii1_rctl */
|
|
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_txd3.rgmii1_td3 */
|
|
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_txd2.rgmii1_td2 */
|
|
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_txd1.rgmii1_td1 */
|
|
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_txd0.rgmii1_td0 */
|
|
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_txclk.rgmii1_tclk */
|
|
AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxclk.rgmii1_rclk */
|
|
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxd3.rgmii1_rd3 */
|
|
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxd2.rgmii1_rd2 */
|
|
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxd1.rgmii1_rd1 */
|
|
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
/* mii1_rxd0.rgmii1_rd0 */
|
|
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
|
|
>;
|
|
};
|
|
|
|
cpsw_sleep: cpsw_sleep {
|
|
pinctrl-single,pins = <
|
|
/* Slave 1 reset value */
|
|
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_default: davinci_mdio_default {
|
|
pinctrl-single,pins = <
|
|
/* mdio_data.mdio_data */
|
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
|
|
/* mdio_clk.mdio_clk */
|
|
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
davinci_mdio_sleep: davinci_mdio_sleep {
|
|
pinctrl-single,pins = <
|
|
/* MDIO reset value */
|
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
/* mmc0_dat3.mmc0_dat3 */
|
|
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* mmc0_dat2.mmc0_dat2 */
|
|
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* mmc0_dat1.mmc0_dat1 */
|
|
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* mmc0_dat0.mmc0_dat0 */
|
|
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* mmc0_clk.mmc0_clk */
|
|
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
/* mmc0_cmd.mmc0_cmd */
|
|
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
spi0_pins: pinmux_spi0_pins {
|
|
pinctrl-single,pins = <
|
|
/* spi0_sclk.spi0_sclk */
|
|
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
|
|
/* spi0_d0.spi0_d0 */
|
|
AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
|
|
/* spi0_d1.spi0_d1 */
|
|
AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
|
|
/* spi0_cs0.spi0_cs0 */
|
|
AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
|
|
/* spi0_cs1.spi0_cs1 */
|
|
AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
/* wl1271 bluetooth */
|
|
bluetooth_pins: pinmux_bluetooth_pins {
|
|
pinctrl-single,pins = <
|
|
/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
|
|
AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
|
|
>;
|
|
};
|
|
|
|
/* TLV320AIC23B codec */
|
|
mcasp1_pins: pinmux_mcasp1_pins {
|
|
pinctrl-single,pins = <
|
|
/* MII1_CRS.mcasp1_aclkx */
|
|
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
|
|
/* MII1_RX_ER.mcasp1_fsx */
|
|
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
|
|
/* MII1_COL.mcasp1_axr2 */
|
|
AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
|
|
/* RMII1_REF_CLK.mcasp1_axr3 */
|
|
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
|
|
>;
|
|
};
|
|
|
|
/* wl1271 WiFi */
|
|
wifi_pins: pinmux_wifi_pins {
|
|
pinctrl-single,pins = <
|
|
/* EMU1.gpio3_8 - WiFi IRQ */
|
|
AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
|
|
/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
|
|
AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
/* WLS1271 bluetooth */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
/* CM-T335 board EEPROM */
|
|
eeprom: 24c02@50 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x50>;
|
|
pagesize = <16>;
|
|
};
|
|
/* Real Time Clock */
|
|
ext_rtc: em3027@56 {
|
|
compatible = "emmicro,em3027";
|
|
reg = <0x56>;
|
|
};
|
|
/* Audio codec */
|
|
tlv320aic23: codec@1a {
|
|
compatible = "ti,tlv320aic23";
|
|
reg = <0x1a>;
|
|
#sound-dai-cells= <0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_ctrl_mod {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&cppi41dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&epwmss0 {
|
|
status = "okay";
|
|
|
|
ecap0: ecap@48300100 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ecap0_pins>;
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nandflash_pins>;
|
|
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
|
ti,nand-ecc-opt = "bch8";
|
|
ti,elm-id = <&elm>;
|
|
nand-bus-width = <8>;
|
|
gpmc,device-width = <1>;
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-on-ns = <0>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-on-ns = <0>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
gpmc,clk-activation-ns = <0>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
/* MTD partition table */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "spl";
|
|
reg = <0x00000000 0x00200000>;
|
|
};
|
|
partition@1 {
|
|
label = "uboot";
|
|
reg = <0x00200000 0x00100000>;
|
|
};
|
|
partition@2 {
|
|
label = "uboot environment";
|
|
reg = <0x00300000 0x00100000>;
|
|
};
|
|
partition@3 {
|
|
label = "dtb";
|
|
reg = <0x00400000 0x00100000>;
|
|
};
|
|
partition@4 {
|
|
label = "splash";
|
|
reg = <0x00500000 0x00400000>;
|
|
};
|
|
partition@5 {
|
|
label = "linux";
|
|
reg = <0x00900000 0x00600000>;
|
|
};
|
|
partition@6 {
|
|
label = "rootfs";
|
|
reg = <0x00F00000 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&elm {
|
|
status = "okay";
|
|
};
|
|
|
|
&mac {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&cpsw_default>;
|
|
pinctrl-1 = <&cpsw_sleep>;
|
|
slaves = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&davinci_mdio {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
|
pinctrl-1 = <&davinci_mdio_sleep>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
phy-mode = "rgmii-txid";
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&vmmc_fixed>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
};
|
|
|
|
&dcan0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dcan0_pins>;
|
|
};
|
|
|
|
&dcan1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dcan1_pins>;
|
|
};
|
|
|
|
/* Touschscreen and analog digital converter */
|
|
&tscadc {
|
|
status = "okay";
|
|
tsc {
|
|
ti,wires = <4>;
|
|
ti,x-plate-resistance = <200>;
|
|
ti,coordinate-readouts = <5>;
|
|
ti,wire-config = <0x01 0x10 0x23 0x32>;
|
|
ti,charge-delay = <0x400>;
|
|
};
|
|
|
|
adc {
|
|
ti,adc-channels = <4 5 6 7>;
|
|
};
|
|
};
|
|
|
|
/* CPU audio */
|
|
&mcasp1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcasp1_pins>;
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
/* 16 serializers */
|
|
num-serializer = <16>;
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
|
|
>;
|
|
tx-num-evt = <1>;
|
|
rx-num-evt = <1>;
|
|
|
|
#sound-dai-cells= <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
ti,pindir-d0-out-d1-in = <1>;
|
|
/* WLS1271 WiFi */
|
|
wlcore: wlcore@1 {
|
|
compatible = "ti,wl1271";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_pins>;
|
|
reg = <1>;
|
|
spi-max-frequency = <48000000>;
|
|
clock-xtal;
|
|
ref-clock-frequency = <38400000>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
|
vwlan-supply = <&vwlan_fixed>;
|
|
};
|
|
};
|