forked from Minki/linux
1bd5b715a3
ata_pci_init_one() is the only function which uses ops->irq_handler and pi->sht. Other initialization functions take the same information as arguments. This causes confusion and duplicate unused entries in structures. Make ata_pci_init_one() take sht as an argument and use ata_interrupt implicitly. All current users use ata_interrupt and if different irq handler is necessary open coding ata_pci_init_one() using ata_prepare_sff_host() and ata_activate_sff_host can be done under ten lines including error handling and driver which requires custom interrupt handler is likely to require custom initialization anyway. As ata_pci_init_one() was the last user of ops->irq_handler, this patch also kills the field. Signed-off-by: Tejun Heo <htejun@gmail.com>
157 lines
3.9 KiB
C
157 lines
3.9 KiB
C
/*
|
|
* RZ1000/1001 driver based upon
|
|
*
|
|
* linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
|
|
* Copyright (C) 1995-1998 Linus Torvalds & author (see below)
|
|
* Principal Author: mlord@pobox.com (Mark Lord)
|
|
*
|
|
* See linux/MAINTAINERS for address of current maintainer.
|
|
*
|
|
* This file provides support for disabling the buggy read-ahead
|
|
* mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_rz1000"
|
|
#define DRV_VERSION "0.2.4"
|
|
|
|
|
|
/**
|
|
* rz1000_set_mode - mode setting function
|
|
* @link: ATA link
|
|
* @unused: returned device on set_mode failure
|
|
*
|
|
* Use a non standard set_mode function. We don't want to be tuned. We
|
|
* would prefer to be BIOS generic but for the fact our hardware is
|
|
* whacked out.
|
|
*/
|
|
|
|
static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
|
|
{
|
|
struct ata_device *dev;
|
|
|
|
ata_link_for_each_dev(dev, link) {
|
|
if (ata_dev_enabled(dev)) {
|
|
/* We don't really care */
|
|
dev->pio_mode = XFER_PIO_0;
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct scsi_host_template rz1000_sht = {
|
|
ATA_PIO_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations rz1000_port_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_mode = rz1000_set_mode,
|
|
};
|
|
|
|
static int rz1000_fifo_disable(struct pci_dev *pdev)
|
|
{
|
|
u16 reg;
|
|
/* Be exceptionally paranoid as we must be sure to apply the fix */
|
|
if (pci_read_config_word(pdev, 0x40, ®) != 0)
|
|
return -1;
|
|
reg &= 0xDFFF;
|
|
if (pci_write_config_word(pdev, 0x40, reg) != 0)
|
|
return -1;
|
|
printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in rz1000_pci_tbl matching with @pdev
|
|
*
|
|
* Configure an RZ1000 interface. This doesn't require much special
|
|
* handling except that we *MUST* kill the chipset readahead or the
|
|
* user may experience data corruption.
|
|
*/
|
|
|
|
static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f,
|
|
.port_ops = &rz1000_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
if (rz1000_fifo_disable(pdev) == 0)
|
|
return ata_pci_init_one(pdev, ppi, &rz1000_sht);
|
|
|
|
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
|
|
/* Not safe to use so skip */
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int rz1000_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
/* If this fails on resume (which is a "cant happen" case), we
|
|
must stop as any progress risks data loss */
|
|
if (rz1000_fifo_disable(pdev))
|
|
panic("rz1000 fifo");
|
|
return ata_pci_device_resume(pdev);
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id pata_rz1000[] = {
|
|
{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
|
|
{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver rz1000_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pata_rz1000,
|
|
.probe = rz1000_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = rz1000_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
static int __init rz1000_init(void)
|
|
{
|
|
return pci_register_driver(&rz1000_pci_driver);
|
|
}
|
|
|
|
static void __exit rz1000_exit(void)
|
|
{
|
|
pci_unregister_driver(&rz1000_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pata_rz1000);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(rz1000_init);
|
|
module_exit(rz1000_exit);
|
|
|