forked from Minki/linux
1abb0dc92d
This is an "RTC-framework" driver for DS1307 and similar RTC chips, It should be a full replacement for the existing ds1337.c driver (using the older RTC glue), giving a net increase in the number of RTC chips that work out-of-the-box. There's a whole cluster of RTCs that are very similar, but the 1337 driver was a bit too picky to work with most of them. Still no support for RTC alarm IRQs (on chips that support them). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
389 lines
9.9 KiB
C
389 lines
9.9 KiB
C
/*
|
|
* rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips.
|
|
*
|
|
* Copyright (C) 2005 James Chapman (ds1337 core)
|
|
* Copyright (C) 2006 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/string.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
|
|
|
|
|
|
/* We can't determine type by probing, but if we expect pre-Linux code
|
|
* to have set the chip up as a clock (turning on the oscillator and
|
|
* setting the date and time), Linux can ignore the non-clock features.
|
|
* That's a natural job for a factory or repair bench.
|
|
*
|
|
* If the I2C "force" mechanism is used, we assume the chip is a ds1337.
|
|
* (Much better would be board-specific tables of I2C devices, along with
|
|
* the platform_data drivers would use to sort such issues out.)
|
|
*/
|
|
enum ds_type {
|
|
unknown = 0,
|
|
ds_1307, /* or ds1338, ... */
|
|
ds_1337, /* or ds1339, ... */
|
|
ds_1340, /* or st m41t00, ... */
|
|
// rs5c372 too? different address...
|
|
};
|
|
|
|
static unsigned short normal_i2c[] = { 0x68, I2C_CLIENT_END };
|
|
|
|
I2C_CLIENT_INSMOD;
|
|
|
|
|
|
|
|
/* RTC registers don't differ much, except for the century flag */
|
|
#define DS1307_REG_SECS 0x00 /* 00-59 */
|
|
# define DS1307_BIT_CH 0x80
|
|
#define DS1307_REG_MIN 0x01 /* 00-59 */
|
|
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
|
|
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
|
|
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
|
|
#define DS1307_REG_WDAY 0x03 /* 01-07 */
|
|
#define DS1307_REG_MDAY 0x04 /* 01-31 */
|
|
#define DS1307_REG_MONTH 0x05 /* 01-12 */
|
|
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
|
|
#define DS1307_REG_YEAR 0x06 /* 00-99 */
|
|
|
|
/* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
|
|
* start at 7, and they differ a lot. Only control and status matter for RTC;
|
|
* be careful using them.
|
|
*/
|
|
#define DS1307_REG_CONTROL 0x07
|
|
# define DS1307_BIT_OUT 0x80
|
|
# define DS1307_BIT_SQWE 0x10
|
|
# define DS1307_BIT_RS1 0x02
|
|
# define DS1307_BIT_RS0 0x01
|
|
#define DS1337_REG_CONTROL 0x0e
|
|
# define DS1337_BIT_nEOSC 0x80
|
|
# define DS1337_BIT_RS2 0x10
|
|
# define DS1337_BIT_RS1 0x08
|
|
# define DS1337_BIT_INTCN 0x04
|
|
# define DS1337_BIT_A2IE 0x02
|
|
# define DS1337_BIT_A1IE 0x01
|
|
#define DS1337_REG_STATUS 0x0f
|
|
# define DS1337_BIT_OSF 0x80
|
|
# define DS1337_BIT_A2I 0x02
|
|
# define DS1337_BIT_A1I 0x01
|
|
#define DS1339_REG_TRICKLE 0x10
|
|
|
|
|
|
|
|
struct ds1307 {
|
|
u8 reg_addr;
|
|
u8 regs[8];
|
|
enum ds_type type;
|
|
struct i2c_msg msg[2];
|
|
struct i2c_client client;
|
|
struct rtc_device *rtc;
|
|
};
|
|
|
|
|
|
static int ds1307_get_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct ds1307 *ds1307 = dev_get_drvdata(dev);
|
|
int tmp;
|
|
|
|
/* read the RTC registers all at once */
|
|
ds1307->msg[1].flags = I2C_M_RD;
|
|
ds1307->msg[1].len = 7;
|
|
|
|
tmp = i2c_transfer(ds1307->client.adapter, ds1307->msg, 2);
|
|
if (tmp != 2) {
|
|
dev_err(dev, "%s error %d\n", "read", tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
|
|
"read",
|
|
ds1307->regs[0], ds1307->regs[1],
|
|
ds1307->regs[2], ds1307->regs[3],
|
|
ds1307->regs[4], ds1307->regs[5],
|
|
ds1307->regs[6]);
|
|
|
|
t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f);
|
|
t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f);
|
|
tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f;
|
|
t->tm_hour = BCD2BIN(tmp);
|
|
t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1;
|
|
t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
|
|
tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f;
|
|
t->tm_mon = BCD2BIN(tmp) - 1;
|
|
|
|
/* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */
|
|
t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"read", t->tm_sec, t->tm_min,
|
|
t->tm_hour, t->tm_mday,
|
|
t->tm_mon, t->tm_year, t->tm_wday);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1307_set_time(struct device *dev, struct rtc_time *t)
|
|
{
|
|
struct ds1307 *ds1307 = dev_get_drvdata(dev);
|
|
int result;
|
|
int tmp;
|
|
u8 *buf = ds1307->regs;
|
|
|
|
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
|
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
|
"write", dt->tm_sec, dt->tm_min,
|
|
dt->tm_hour, dt->tm_mday,
|
|
dt->tm_mon, dt->tm_year, dt->tm_wday);
|
|
|
|
*buf++ = 0; /* first register addr */
|
|
buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec);
|
|
buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min);
|
|
buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour);
|
|
buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1);
|
|
buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday);
|
|
buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1);
|
|
|
|
/* assume 20YY not 19YY */
|
|
tmp = t->tm_year - 100;
|
|
buf[DS1307_REG_YEAR] = BIN2BCD(tmp);
|
|
|
|
if (ds1307->type == ds_1337)
|
|
buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
|
|
else if (ds1307->type == ds_1340)
|
|
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
|
|
| DS1340_BIT_CENTURY;
|
|
|
|
ds1307->msg[1].flags = 0;
|
|
ds1307->msg[1].len = 8;
|
|
|
|
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n",
|
|
"write", buf[0], buf[1], buf[2], buf[3],
|
|
buf[4], buf[5], buf[6]);
|
|
|
|
result = i2c_transfer(ds1307->client.adapter, &ds1307->msg[1], 1);
|
|
if (result != 1) {
|
|
dev_err(dev, "%s error %d\n", "write", tmp);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct rtc_class_ops ds13xx_rtc_ops = {
|
|
.read_time = ds1307_get_time,
|
|
.set_time = ds1307_set_time,
|
|
};
|
|
|
|
static struct i2c_driver ds1307_driver;
|
|
|
|
static int __devinit
|
|
ds1307_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
{
|
|
struct ds1307 *ds1307;
|
|
int err = -ENODEV;
|
|
struct i2c_client *client;
|
|
int tmp;
|
|
|
|
if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
client = &ds1307->client;
|
|
client->addr = address;
|
|
client->adapter = adapter;
|
|
client->driver = &ds1307_driver;
|
|
client->flags = 0;
|
|
|
|
i2c_set_clientdata(client, ds1307);
|
|
|
|
ds1307->msg[0].addr = client->addr;
|
|
ds1307->msg[0].flags = 0;
|
|
ds1307->msg[0].len = 1;
|
|
ds1307->msg[0].buf = &ds1307->reg_addr;
|
|
|
|
ds1307->msg[1].addr = client->addr;
|
|
ds1307->msg[1].flags = I2C_M_RD;
|
|
ds1307->msg[1].len = sizeof(ds1307->regs);
|
|
ds1307->msg[1].buf = ds1307->regs;
|
|
|
|
/* HACK: "force" implies "needs ds1337-style-oscillator setup" */
|
|
if (kind >= 0) {
|
|
ds1307->type = ds_1337;
|
|
|
|
ds1307->reg_addr = DS1337_REG_CONTROL;
|
|
ds1307->msg[1].len = 2;
|
|
|
|
tmp = i2c_transfer(client->adapter, ds1307->msg, 2);
|
|
if (tmp != 2) {
|
|
pr_debug("read error %d\n", tmp);
|
|
err = -EIO;
|
|
goto exit_free;
|
|
}
|
|
|
|
ds1307->reg_addr = 0;
|
|
ds1307->msg[1].len = sizeof(ds1307->regs);
|
|
|
|
/* oscillator is off; need to turn it on */
|
|
if ((ds1307->regs[0] & DS1337_BIT_nEOSC)
|
|
|| (ds1307->regs[1] & DS1337_BIT_OSF)) {
|
|
printk(KERN_ERR "no ds1337 oscillator code\n");
|
|
goto exit_free;
|
|
}
|
|
} else
|
|
ds1307->type = ds_1307;
|
|
|
|
read_rtc:
|
|
/* read RTC registers */
|
|
|
|
tmp = i2c_transfer(client->adapter, ds1307->msg, 2);
|
|
if (tmp != 2) {
|
|
pr_debug("read error %d\n", tmp);
|
|
err = -EIO;
|
|
goto exit_free;
|
|
}
|
|
|
|
/* minimal sanity checking; some chips (like DS1340) don't
|
|
* specify the extra bits as must-be-zero, but there are
|
|
* still a few values that are clearly out-of-range.
|
|
*/
|
|
tmp = ds1307->regs[DS1307_REG_SECS];
|
|
if (tmp & DS1307_BIT_CH) {
|
|
if (ds1307->type && ds1307->type != ds_1307) {
|
|
pr_debug("not a ds1307?\n");
|
|
goto exit_free;
|
|
}
|
|
ds1307->type = ds_1307;
|
|
|
|
/* this partial initialization should work for ds1307,
|
|
* ds1338, ds1340, st m41t00, and more.
|
|
*/
|
|
dev_warn(&client->dev, "oscillator started; SET TIME!\n");
|
|
i2c_smbus_write_byte_data(client, 0, 0);
|
|
goto read_rtc;
|
|
}
|
|
tmp = BCD2BIN(tmp & 0x7f);
|
|
if (tmp > 60)
|
|
goto exit_free;
|
|
tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f);
|
|
if (tmp > 60)
|
|
goto exit_free;
|
|
|
|
tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f);
|
|
if (tmp == 0 || tmp > 31)
|
|
goto exit_free;
|
|
|
|
tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f);
|
|
if (tmp == 0 || tmp > 12)
|
|
goto exit_free;
|
|
|
|
/* force into in 24 hour mode (most chips) or
|
|
* disable century bit (ds1340)
|
|
*/
|
|
tmp = ds1307->regs[DS1307_REG_HOUR];
|
|
if (tmp & (1 << 6)) {
|
|
if (tmp & (1 << 5))
|
|
tmp = BCD2BIN(tmp & 0x1f) + 12;
|
|
else
|
|
tmp = BCD2BIN(tmp);
|
|
i2c_smbus_write_byte_data(client,
|
|
DS1307_REG_HOUR,
|
|
BIN2BCD(tmp));
|
|
}
|
|
|
|
/* FIXME chips like 1337 can generate alarm irqs too; those are
|
|
* worth exposing through the API (especially when the irq is
|
|
* wakeup-capable).
|
|
*/
|
|
|
|
switch (ds1307->type) {
|
|
case unknown:
|
|
strlcpy(client->name, "unknown", I2C_NAME_SIZE);
|
|
break;
|
|
case ds_1307:
|
|
strlcpy(client->name, "ds1307", I2C_NAME_SIZE);
|
|
break;
|
|
case ds_1337:
|
|
strlcpy(client->name, "ds1337", I2C_NAME_SIZE);
|
|
break;
|
|
case ds_1340:
|
|
strlcpy(client->name, "ds1340", I2C_NAME_SIZE);
|
|
break;
|
|
}
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(client)))
|
|
goto exit_free;
|
|
|
|
ds1307->rtc = rtc_device_register(client->name, &client->dev,
|
|
&ds13xx_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(ds1307->rtc)) {
|
|
err = PTR_ERR(ds1307->rtc);
|
|
dev_err(&client->dev,
|
|
"unable to register the class device\n");
|
|
goto exit_detach;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_detach:
|
|
i2c_detach_client(client);
|
|
exit_free:
|
|
kfree(ds1307);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __devinit
|
|
ds1307_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
|
|
return 0;
|
|
return i2c_probe(adapter, &addr_data, ds1307_detect);
|
|
}
|
|
|
|
static int __devexit ds1307_detach_client(struct i2c_client *client)
|
|
{
|
|
int err;
|
|
struct ds1307 *ds1307 = i2c_get_clientdata(client);
|
|
|
|
rtc_device_unregister(ds1307->rtc);
|
|
if ((err = i2c_detach_client(client)))
|
|
return err;
|
|
kfree(ds1307);
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver ds1307_driver = {
|
|
.driver = {
|
|
.name = "ds1307",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.attach_adapter = ds1307_attach_adapter,
|
|
.detach_client = __devexit_p(ds1307_detach_client),
|
|
};
|
|
|
|
static int __init ds1307_init(void)
|
|
{
|
|
return i2c_add_driver(&ds1307_driver);
|
|
}
|
|
module_init(ds1307_init);
|
|
|
|
static void __exit ds1307_exit(void)
|
|
{
|
|
i2c_del_driver(&ds1307_driver);
|
|
}
|
|
module_exit(ds1307_exit);
|
|
|
|
MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips");
|
|
MODULE_LICENSE("GPL");
|