linux/arch/mips
Linus Torvalds 9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00
..
alchemy MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
ar7 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
ath25 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
ath79 MIPS: ath79: Remove unused include <asm/mips_machine.h> 2020-07-28 10:20:44 +02:00
bcm47xx MIPS: BCM47XX: Remove the needless check with the 1074K 2020-09-23 14:48:53 +02:00
bcm63xx MIPS: BCM63xx: improve CFE version detection 2020-07-24 12:02:46 +02:00
bmips dma-direct: rename and cleanup __phys_to_dma 2020-09-11 09:14:43 +02:00
boot net: mscc: ocelot: add definitions for VCAP ES0 keys, actions and target 2020-09-29 18:26:12 -07:00
cavium-octeon dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
cobalt MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
configs all arch: remove system call sys_sysctl 2020-08-14 19:56:56 -07:00
crypto crypto: {arm,arm64,mips}/poly1305 - remove redundant non-reduction from emit 2020-01-16 15:18:12 +08:00
dec MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
fw mips: Return proper error code from console ->setup() hook 2020-06-25 14:20:13 +02:00
generic MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
include dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
jazz dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> 2020-10-06 07:07:06 +02:00
jz4740 MIPS: ingenic: Hardcode mem size for qi,lb60 board 2020-07-31 17:48:57 +02:00
kernel dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
kvm KVM: MIPS: Change the definition of kvm type 2020-09-11 13:22:52 -04:00
lantiq MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names 2020-06-15 13:14:51 +02:00
lib mips: propagate the calling convention change down into __csum_partial_copy_..._user() 2020-08-20 15:45:20 -04:00
loongson2ef dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
loongson32 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
loongson64 dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
math-emu MIPS: Use fallthrough for arch/mips 2020-05-07 11:55:47 +02:00
mm dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> 2020-10-06 07:07:06 +02:00
mti-malta MIPS: Fix exception handler memcpy() 2020-05-24 09:15:54 +02:00
net MIPS: BPF: Use sizeof_field() instead of FIELD_SIZEOF() 2020-01-10 11:33:35 -08:00
netlogic memblock: use separate iterators for memory and reserved regions 2020-10-13 18:38:35 -07:00
oprofile mips/oprofile: Fix fallthrough placement 2020-08-22 09:23:15 +02:00
pci dma-direct: rename and cleanup __phys_to_dma 2020-09-11 09:14:43 +02:00
pic32 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
pistachio MIPS: Fix exception handler memcpy() 2020-05-24 09:15:54 +02:00
pnx833x MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
power
ralink This time around we have 4 lines of diff in the core framework, removing a 2020-06-10 11:42:19 -07:00
rb532 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
sgi-ip22 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
sgi-ip27 mm/sparse: cleanup the code surrounding memory_present() 2020-08-07 11:33:27 -07:00
sgi-ip30 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
sgi-ip32 dma-direct: rename and cleanup __phys_to_dma 2020-09-11 09:14:43 +02:00
sibyte MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
sni MIPS: SNI: Fix spurious interrupts 2020-09-16 22:40:58 +02:00
tools MIPS: tools: Fix resource leak in elf-entry.c 2020-05-24 09:29:48 +02:00
txx9 MIPS: Only include the platform file needed 2020-05-13 00:17:18 +02:00
vdso Kbuild updates for v5.9 2020-08-09 14:10:26 -07:00
vr41xx MIPS: Fix builds for VR41xx platforms 2020-05-15 09:09:58 +02:00
Kbuild MIPS: Fix "make clean" error due to recent changes 2020-05-13 13:20:22 +02:00
Kbuild.platforms MIPS: Retire kvm paravirt 2020-07-24 10:53:23 +02:00
Kconfig dma-mapping updates for 5.10 2020-10-15 14:43:29 -07:00
Kconfig.debug mips: Add CPS_NS16550_WIDTH config 2020-05-22 09:12:52 +02:00
Makefile mips: Add MIPS Warrior P5600 support 2020-05-22 09:10:53 +02:00
Makefile.postlink MIPS: fix indentation of the 'RELOCS' message 2020-01-20 15:37:30 -08:00