linux/drivers/of/platform.c
Linus Torvalds 2518f226c6 drm for 5.19-rc1
dma-buf:
 - add dma_resv_replace_fences
 - add dma_resv_get_singleton
 - make dma_excl_fence private
 
 core:
 - EDID parser refactorings
 - switch drivers to drm_mode_copy/duplicate
 - DRM managed mutex initialization
 
 display-helper:
 - put HDMI, SCDC, HDCP, DSC and DP into new module
 
 gem:
 - rework fence handling
 
 ttm:
 - rework bulk move handling
 - add common debugfs for resource managers
 - convert to kvcalloc
 
 format helpers:
 - support monochrome formats
 - RGB888, RGB565 to XRGB8888 conversions
 
 fbdev:
 - cfb/sys_imageblit fixes
 - pagelist corruption fix
 - create offb platform device
 - deferred io improvements
 
 sysfb:
 - Kconfig rework
 - support for VESA mode selection
 
 bridge:
 - conversions to devm_drm_of_get_bridge
 - conversions to panel_bridge
 - analogix_dp - autosuspend support
 - it66121 - audio support
 - tc358767 - DSI to DPI support
 - icn6211 - PLL/I2C fixes, DT property
 - adv7611 - enable DRM_BRIDGE_OP_HPD
 - anx7625 - fill ELD if no monitor
 - dw_hdmi - add audio support
 - lontium LT9211 support, i.MXMP LDB
 - it6505: Kconfig fix, DPCD set power fix
 - adv7511 - CEC support for ADV7535
 
 panel:
 - ltk035c5444t, B133UAN01, NV3052C panel support
 - DataImage FG040346DSSWBG04 support
 - st7735r - DT bindings fix
 - ssd130x - fixes
 
 i915:
 - DG2 laptop PCI-IDs ("motherboard down")
 - Initial RPL-P PCI IDs
 - compute engine ABI
 - DG2 Tile4 support
 - DG2 CCS clear color compression support
 - DG2 render/media compression formats support
 - ATS-M platform info
 - RPL-S PCI IDs added
 - Bump ADL-P DMC version to v2.16
 - Support static DRRS
 - Support multiple eDP/LVDS native mode refresh rates
 - DP HDR support for HSW+
 - Lots of display refactoring + fixes
 - GuC hwconfig support and query
 - sysfs support for multi-tile
 - fdinfo per-client gpu utilisation
 - add geometry subslices query
 - fix prime mmap with LMEM
 - fix vm open count and remove vma refcounts
 - contiguous allocation fixes
 - steered register write support
 - small PCI BAR enablement
 - GuC error capture support
 - sunset igpu legacy mmap support for newer devices
 - GuC version 70.1.1 support
 
 amdgpu:
 - Initial SoC21 support
 - SMU 13.x enablement
 - SMU 13.0.4 support
 - ttm_eu cleanups
 - USB-C, GPUVM updates
 - TMZ fixes for RV
 - RAS support for VCN
 - PM sysfs code cleanup
 - DC FP rework
 - extend CG/PG flags to 64-bit
 - SI dpm lockdep fix
 - runtime PM fixes
 
 amdkfd:
 - RAS/SVM fixes
 - TLB flush fixes
 - CRIU GWS support
 - ignore bogus MEC signals more efficiently
 
 msm:
 - Fourcc modifier for tiled but not compressed layouts
 - Support for userspace allocated IOVA (GPU virtual address)
 - DPU: DSC (Display Stream Compression) support
 - DP: eDP support
 - DP: conversion to use drm_bridge and drm_bridge_connector
 - Merge DPU1 and MDP5 MDSS driver
 - DPU: writeback support
 
 nouveau:
 - make some structures static
 - make some variables static
 - switch to drm_gem_plane_helper_prepare_fb
 
 radeon:
 - misc fixes/cleanups
 
 mxsfb:
 - rework crtc mode setting
 - LCDIF CRC support
 
 etnaviv:
 - fencing improvements
 - fix address space collisions
 - cleanup MMU reference handling
 
 gma500:
 - GEM/GTT improvements
 - connector handling fixes
 
 komeda:
 - switch to plane reset helper
 
 mediatek:
 - MIPI DSI improvements
 
 omapdrm:
 - GEM improvements
 
 qxl:
 - aarch64 support
 
 vc4:
 - add a CL submission tracepoint
 - HDMI YUV support
 - HDMI/clock improvements
 - drop is_hdmi caching
 
 virtio:
 - remove restriction of non-zero blob types
 
 vmwgfx:
 - support for cursormob and cursorbypass 4
 - fence improvements
 
 tidss:
 - reset DISPC on startup
 
 solomon:
 - SPI support
 - DT improvements
 
 sun4i:
 - allwinner D1 support
 - drop is_hdmi caching
 
 imx:
 - use swap() instead of open-coding
 - use devm_platform_ioremap_resource
 - remove redunant initializations
 
 ast:
 - Displayport support
 
 rockchip:
 - Refactor IOMMU initialisation
 - make some structures static
 - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
 - support swapped YUV formats,
 - clock improvements
 - rk3568 support
 - VOP2 support
 
 mediatek:
 - MT8186 support
 
 tegra:
 - debugabillity improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmKNxkAACgkQDHTzWXnE
 hr4hghAAqSXeMEw1w34miyM28hcOpXqkDfT1VVooqFxBT8MBqamzpZvCH94qsZwm
 3DRXlhQ4pk8wzUcWJpGprdNakxNQPpFVs2UuxYxOyrxYpdkbOwqsEcM3d8VXD9Cy
 E36z+dr85A8Te/J0Yg/FLoZMHulTlidqEZeOz6SMaNUohtrmH/oPWR+cPIy4/Zpp
 yysfbBSKTwblJFDf4+nIpks/VvJYAUO3i6KClT/Rh79Yg6de582AU0YaNcEArTi6
 JqdiYIoYLx609Ecy5NVme6wR/ai46afFLMYt3ZIP4OfHRINk+YL01BYMo2JE2M8l
 xjOH0Iwb7evzWqLK/ESwqp3P7nyppmLlfbZOFHWUfNJsjq2H3ePaAGhzOlYx1c70
 XENzY4IvpYYdR0pJuh1gw1cNZfM9JDAynGJ5jvsATLGBGQbpFsy3w/PMZT17q8an
 DpBwqQmShUdCJ2m+6zznC3VsxJpbvWKNE1I93NxAWZXmFYxoHCzRihahUxKcNDrQ
 ZLH7RSlk9SE/ZtNSLkU15YnKtoW+ThFIssUpVio6U/fZot1+efZkmkXplSuFvj6R
 i7s14hMWQjSJzpJg1DXfhDMycEOujNiQppCG2EaDlVxvUtCqYBd3EHOI7KQON//+
 iVtmEEnWh5rcCM+WsxLGf3Y7sVP3vfo1LOCxshb1XVfDmeMksoI=
 =BYQA
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Intel have enabled DG2 on certain SKUs for laptops, AMD has started
  some new GPU support, msm has user allocated VA controls

  dma-buf:
   - add dma_resv_replace_fences
   - add dma_resv_get_singleton
   - make dma_excl_fence private

  core:
   - EDID parser refactorings
   - switch drivers to drm_mode_copy/duplicate
   - DRM managed mutex initialization

  display-helper:
   - put HDMI, SCDC, HDCP, DSC and DP into new module

  gem:
   - rework fence handling

  ttm:
   - rework bulk move handling
   - add common debugfs for resource managers
   - convert to kvcalloc

  format helpers:
   - support monochrome formats
   - RGB888, RGB565 to XRGB8888 conversions

  fbdev:
   - cfb/sys_imageblit fixes
   - pagelist corruption fix
   - create offb platform device
   - deferred io improvements

  sysfb:
   - Kconfig rework
   - support for VESA mode selection

  bridge:
   - conversions to devm_drm_of_get_bridge
   - conversions to panel_bridge
   - analogix_dp - autosuspend support
   - it66121 - audio support
   - tc358767 - DSI to DPI support
   - icn6211 - PLL/I2C fixes, DT property
   - adv7611 - enable DRM_BRIDGE_OP_HPD
   - anx7625 - fill ELD if no monitor
   - dw_hdmi - add audio support
   - lontium LT9211 support, i.MXMP LDB
   - it6505: Kconfig fix, DPCD set power fix
   - adv7511 - CEC support for ADV7535

  panel:
   - ltk035c5444t, B133UAN01, NV3052C panel support
   - DataImage FG040346DSSWBG04 support
   - st7735r - DT bindings fix
   - ssd130x - fixes

  i915:
   - DG2 laptop PCI-IDs ("motherboard down")
   - Initial RPL-P PCI IDs
   - compute engine ABI
   - DG2 Tile4 support
   - DG2 CCS clear color compression support
   - DG2 render/media compression formats support
   - ATS-M platform info
   - RPL-S PCI IDs added
   - Bump ADL-P DMC version to v2.16
   - Support static DRRS
   - Support multiple eDP/LVDS native mode refresh rates
   - DP HDR support for HSW+
   - Lots of display refactoring + fixes
   - GuC hwconfig support and query
   - sysfs support for multi-tile
   - fdinfo per-client gpu utilisation
   - add geometry subslices query
   - fix prime mmap with LMEM
   - fix vm open count and remove vma refcounts
   - contiguous allocation fixes
   - steered register write support
   - small PCI BAR enablement
   - GuC error capture support
   - sunset igpu legacy mmap support for newer devices
   - GuC version 70.1.1 support

  amdgpu:
   - Initial SoC21 support
   - SMU 13.x enablement
   - SMU 13.0.4 support
   - ttm_eu cleanups
   - USB-C, GPUVM updates
   - TMZ fixes for RV
   - RAS support for VCN
   - PM sysfs code cleanup
   - DC FP rework
   - extend CG/PG flags to 64-bit
   - SI dpm lockdep fix
   - runtime PM fixes

  amdkfd:
   - RAS/SVM fixes
   - TLB flush fixes
   - CRIU GWS support
   - ignore bogus MEC signals more efficiently

  msm:
   - Fourcc modifier for tiled but not compressed layouts
   - Support for userspace allocated IOVA (GPU virtual address)
   - DPU: DSC (Display Stream Compression) support
   - DP: eDP support
   - DP: conversion to use drm_bridge and drm_bridge_connector
   - Merge DPU1 and MDP5 MDSS driver
   - DPU: writeback support

  nouveau:
   - make some structures static
   - make some variables static
   - switch to drm_gem_plane_helper_prepare_fb

  radeon:
   - misc fixes/cleanups

  mxsfb:
   - rework crtc mode setting
   - LCDIF CRC support

  etnaviv:
   - fencing improvements
   - fix address space collisions
   - cleanup MMU reference handling

  gma500:
   - GEM/GTT improvements
   - connector handling fixes

  komeda:
   - switch to plane reset helper

  mediatek:
   - MIPI DSI improvements

  omapdrm:
   - GEM improvements

  qxl:
   - aarch64 support

  vc4:
   - add a CL submission tracepoint
   - HDMI YUV support
   - HDMI/clock improvements
   - drop is_hdmi caching

  virtio:
   - remove restriction of non-zero blob types

  vmwgfx:
   - support for cursormob and cursorbypass 4
   - fence improvements

  tidss:
   - reset DISPC on startup

  solomon:
   - SPI support
   - DT improvements

  sun4i:
   - allwinner D1 support
   - drop is_hdmi caching

  imx:
   - use swap() instead of open-coding
   - use devm_platform_ioremap_resource
   - remove redunant initializations

  ast:
   - Displayport support

  rockchip:
   - Refactor IOMMU initialisation
   - make some structures static
   - replace drm_detect_hdmi_monitor with drm_display_info.is_hdmi
   - support swapped YUV formats,
   - clock improvements
   - rk3568 support
   - VOP2 support

  mediatek:
   - MT8186 support

  tegra:
   - debugabillity improvements"

* tag 'drm-next-2022-05-25' of git://anongit.freedesktop.org/drm/drm: (1740 commits)
  drm/i915/dsi: fix VBT send packet port selection for ICL+
  drm/i915/uc: Fix undefined behavior due to shift overflowing the constant
  drm/i915/reg: fix undefined behavior due to shift overflowing the constant
  drm/i915/gt: Fix use of static in macro mismatch
  drm/i915/audio: fix audio code enable/disable pipe logging
  drm/i915: Fix CFI violation with show_dynamic_id()
  drm/i915: Fix 'mixing different enum types' warnings in intel_display_power.c
  drm/i915/gt: Fix build error without CONFIG_PM
  drm/msm/dpu: handle pm_runtime_get_sync() errors in bind path
  drm/msm/dpu: add DRM_MODE_ROTATE_180 back to supported rotations
  drm/msm: don't free the IRQ if it was not requested
  drm/msm/dpu: limit writeback modes according to max_linewidth
  drm/amd: Don't reset dGPUs if the system is going to s2idle
  drm/amdgpu: Unmap legacy queue when MES is enabled
  drm: msm: fix possible memory leak in mdp5_crtc_cursor_set()
  drm/msm: Fix fb plane offset calculation
  drm/msm/a6xx: Fix refcount leak in a6xx_gpu_init
  drm/msm/dsi: don't powerup at modeset time for parade-ps8640
  drm/rockchip: Change register space names in vop2
  dt-bindings: display: rockchip: make reg-names mandatory for VOP2
  ...
2022-05-25 16:18:27 -07:00

783 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
* and Arnd Bergmann, IBM Corp.
* Merged from powerpc/kernel/of_platform.c and
* sparc{,64}/kernel/of_device.c by Stephen Rothwell
*/
#define pr_fmt(fmt) "OF: " fmt
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
const struct of_device_id of_default_bus_match_table[] = {
{ .compatible = "simple-bus", },
{ .compatible = "simple-mfd", },
{ .compatible = "isa", },
#ifdef CONFIG_ARM_AMBA
{ .compatible = "arm,amba-bus", },
#endif /* CONFIG_ARM_AMBA */
{} /* Empty terminated list */
};
static const struct of_device_id of_skipped_node_table[] = {
{ .compatible = "operating-points-v2", },
{} /* Empty terminated list */
};
/**
* of_find_device_by_node - Find the platform_device associated with a node
* @np: Pointer to device tree node
*
* Takes a reference to the embedded struct device which needs to be dropped
* after use.
*
* Return: platform_device pointer, or NULL if not found
*/
struct platform_device *of_find_device_by_node(struct device_node *np)
{
struct device *dev;
dev = bus_find_device_by_of_node(&platform_bus_type, np);
return dev ? to_platform_device(dev) : NULL;
}
EXPORT_SYMBOL(of_find_device_by_node);
#ifdef CONFIG_OF_ADDRESS
/*
* The following routines scan a subtree and registers a device for
* each applicable node.
*
* Note: sparc doesn't use these routines because it has a different
* mechanism for creating devices from device tree nodes.
*/
/**
* of_device_make_bus_id - Use the device node data to assign a unique name
* @dev: pointer to device structure that is linked to a device tree node
*
* This routine will first try using the translated bus address to
* derive a unique name. If it cannot, then it will prepend names from
* parent nodes until a unique name can be derived.
*/
static void of_device_make_bus_id(struct device *dev)
{
struct device_node *node = dev->of_node;
const __be32 *reg;
u64 addr;
u32 mask;
/* Construct the name, using parent nodes if necessary to ensure uniqueness */
while (node->parent) {
/*
* If the address can be translated, then that is as much
* uniqueness as we need. Make it the first component and return
*/
reg = of_get_property(node, "reg", NULL);
if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
if (!of_property_read_u32(node, "mask", &mask))
dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
addr, ffs(mask) - 1, node, dev_name(dev));
else
dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
addr, node, dev_name(dev));
return;
}
/* format arguments only used if dev_name() resolves to NULL */
dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
kbasename(node->full_name), dev_name(dev));
node = node->parent;
}
}
/**
* of_device_alloc - Allocate and initialize an of_device
* @np: device node to assign to device
* @bus_id: Name to assign to the device. May be null to use default name.
* @parent: Parent device.
*/
struct platform_device *of_device_alloc(struct device_node *np,
const char *bus_id,
struct device *parent)
{
struct platform_device *dev;
int rc, i, num_reg = 0;
struct resource *res, temp_res;
dev = platform_device_alloc("", PLATFORM_DEVID_NONE);
if (!dev)
return NULL;
/* count the io resources */
while (of_address_to_resource(np, num_reg, &temp_res) == 0)
num_reg++;
/* Populate the resource table */
if (num_reg) {
res = kcalloc(num_reg, sizeof(*res), GFP_KERNEL);
if (!res) {
platform_device_put(dev);
return NULL;
}
dev->num_resources = num_reg;
dev->resource = res;
for (i = 0; i < num_reg; i++, res++) {
rc = of_address_to_resource(np, i, res);
WARN_ON(rc);
}
}
dev->dev.of_node = of_node_get(np);
dev->dev.fwnode = &np->fwnode;
dev->dev.parent = parent ? : &platform_bus;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
return dev;
}
EXPORT_SYMBOL(of_device_alloc);
/**
* of_platform_device_create_pdata - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @platform_data: pointer to populate platform_data pointer with
* @parent: Linux device model parent device.
*
* Return: Pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
static struct platform_device *of_platform_device_create_pdata(
struct device_node *np,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct platform_device *dev;
if (!of_device_is_available(np) ||
of_node_test_and_set_flag(np, OF_POPULATED))
return NULL;
dev = of_device_alloc(np, bus_id, parent);
if (!dev)
goto err_clear_flag;
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
of_msi_configure(&dev->dev, dev->dev.of_node);
if (of_device_add(dev) != 0) {
platform_device_put(dev);
goto err_clear_flag;
}
return dev;
err_clear_flag:
of_node_clear_flag(np, OF_POPULATED);
return NULL;
}
/**
* of_platform_device_create - Alloc, initialize and register an of_device
* @np: pointer to node to create device for
* @bus_id: name to assign device
* @parent: Linux device model parent device.
*
* Return: Pointer to created platform device, or NULL if a device was not
* registered. Unavailable devices will not get registered.
*/
struct platform_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
struct device *parent)
{
return of_platform_device_create_pdata(np, bus_id, NULL, parent);
}
EXPORT_SYMBOL(of_platform_device_create);
#ifdef CONFIG_ARM_AMBA
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
struct amba_device *dev;
const void *prop;
int ret;
pr_debug("Creating amba device %pOF\n", node);
if (!of_device_is_available(node) ||
of_node_test_and_set_flag(node, OF_POPULATED))
return NULL;
dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
goto err_clear_flag;
/* AMBA devices only support a single DMA mask */
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
/* setup generic device info */
dev->dev.of_node = of_node_get(node);
dev->dev.fwnode = &node->fwnode;
dev->dev.parent = parent ? : &platform_bus;
dev->dev.platform_data = platform_data;
if (bus_id)
dev_set_name(&dev->dev, "%s", bus_id);
else
of_device_make_bus_id(&dev->dev);
/* Allow the HW Peripheral ID to be overridden */
prop = of_get_property(node, "arm,primecell-periphid", NULL);
if (prop)
dev->periphid = of_read_ulong(prop, 1);
ret = of_address_to_resource(node, 0, &dev->res);
if (ret) {
pr_err("amba: of_address_to_resource() failed (%d) for %pOF\n",
ret, node);
goto err_free;
}
ret = amba_device_add(dev, &iomem_resource);
if (ret) {
pr_err("amba_device_add() failed (%d) for %pOF\n",
ret, node);
goto err_free;
}
return dev;
err_free:
amba_device_put(dev);
err_clear_flag:
of_node_clear_flag(node, OF_POPULATED);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
static struct amba_device *of_amba_device_create(struct device_node *node,
const char *bus_id,
void *platform_data,
struct device *parent)
{
return NULL;
}
#endif /* CONFIG_ARM_AMBA */
/*
* of_dev_lookup() - Given a device node, lookup the preferred Linux name
*/
static const struct of_dev_auxdata *of_dev_lookup(const struct of_dev_auxdata *lookup,
struct device_node *np)
{
const struct of_dev_auxdata *auxdata;
struct resource res;
int compatible = 0;
if (!lookup)
return NULL;
auxdata = lookup;
for (; auxdata->compatible; auxdata++) {
if (!of_device_is_compatible(np, auxdata->compatible))
continue;
compatible++;
if (!of_address_to_resource(np, 0, &res))
if (res.start != auxdata->phys_addr)
continue;
pr_debug("%pOF: devname=%s\n", np, auxdata->name);
return auxdata;
}
if (!compatible)
return NULL;
/* Try compatible match if no phys_addr and name are specified */
auxdata = lookup;
for (; auxdata->compatible; auxdata++) {
if (!of_device_is_compatible(np, auxdata->compatible))
continue;
if (!auxdata->phys_addr && !auxdata->name) {
pr_debug("%pOF: compatible match\n", np);
return auxdata;
}
}
return NULL;
}
/**
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
* @matches: match table for bus nodes
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent for new device, or NULL for top level.
* @strict: require compatible property
*
* Creates a platform_device for the provided device_node, and optionally
* recursively create devices for all the child nodes.
*/
static int of_platform_bus_create(struct device_node *bus,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent, bool strict)
{
const struct of_dev_auxdata *auxdata;
struct device_node *child;
struct platform_device *dev;
const char *bus_id = NULL;
void *platform_data = NULL;
int rc = 0;
/* Make sure it has a compatible property */
if (strict && (!of_get_property(bus, "compatible", NULL))) {
pr_debug("%s() - skipping %pOF, no compatible prop\n",
__func__, bus);
return 0;
}
/* Skip nodes for which we don't want to create devices */
if (unlikely(of_match_node(of_skipped_node_table, bus))) {
pr_debug("%s() - skipping %pOF node\n", __func__, bus);
return 0;
}
if (of_node_check_flag(bus, OF_POPULATED_BUS)) {
pr_debug("%s() - skipping %pOF, already populated\n",
__func__, bus);
return 0;
}
auxdata = of_dev_lookup(lookup, bus);
if (auxdata) {
bus_id = auxdata->name;
platform_data = auxdata->platform_data;
}
if (of_device_is_compatible(bus, "arm,primecell")) {
/*
* Don't return an error here to keep compatibility with older
* device tree files.
*/
of_amba_device_create(bus, bus_id, platform_data, parent);
return 0;
}
dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent);
if (!dev || !of_match_node(matches, bus))
return 0;
for_each_child_of_node(bus, child) {
pr_debug(" create child: %pOF\n", child);
rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict);
if (rc) {
of_node_put(child);
break;
}
}
of_node_set_flag(bus, OF_POPULATED_BUS);
return rc;
}
/**
* of_platform_bus_probe() - Probe the device-tree for platform buses
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table for bus nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Note that children of the provided root are not instantiated as devices
* unless the specified root itself matches the bus list and is not NULL.
*/
int of_platform_bus_probe(struct device_node *root,
const struct of_device_id *matches,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
pr_debug("%s()\n", __func__);
pr_debug(" starting at: %pOF\n", root);
/* Do a self check of bus type, if there's a match, create children */
if (of_match_node(matches, root)) {
rc = of_platform_bus_create(root, matches, NULL, parent, false);
} else for_each_child_of_node(root, child) {
if (!of_match_node(matches, child))
continue;
rc = of_platform_bus_create(child, matches, NULL, parent, false);
if (rc) {
of_node_put(child);
break;
}
}
of_node_put(root);
return rc;
}
EXPORT_SYMBOL(of_platform_bus_probe);
/**
* of_platform_populate() - Populate platform_devices from device tree data
* @root: parent of the first level to probe or NULL for the root of the tree
* @matches: match table, NULL to use the default
* @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent to hook devices from, NULL for toplevel
*
* Similar to of_platform_bus_probe(), this function walks the device tree
* and creates devices from nodes. It differs in that it follows the modern
* convention of requiring all device nodes to have a 'compatible' property,
* and it is suitable for creating devices which are children of the root
* node (of_platform_bus_probe will only create children of the root which
* are selected by the @matches argument).
*
* New board support should be using this function instead of
* of_platform_bus_probe().
*
* Return: 0 on success, < 0 on failure.
*/
int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
struct device *parent)
{
struct device_node *child;
int rc = 0;
root = root ? of_node_get(root) : of_find_node_by_path("/");
if (!root)
return -EINVAL;
pr_debug("%s()\n", __func__);
pr_debug(" starting at: %pOF\n", root);
device_links_supplier_sync_state_pause();
for_each_child_of_node(root, child) {
rc = of_platform_bus_create(child, matches, lookup, parent, true);
if (rc) {
of_node_put(child);
break;
}
}
device_links_supplier_sync_state_resume();
of_node_set_flag(root, OF_POPULATED_BUS);
of_node_put(root);
return rc;
}
EXPORT_SYMBOL_GPL(of_platform_populate);
int of_platform_default_populate(struct device_node *root,
const struct of_dev_auxdata *lookup,
struct device *parent)
{
return of_platform_populate(root, of_default_bus_match_table, lookup,
parent);
}
EXPORT_SYMBOL_GPL(of_platform_default_populate);
static const struct of_device_id reserved_mem_matches[] = {
{ .compatible = "phram" },
{ .compatible = "qcom,rmtfs-mem" },
{ .compatible = "qcom,cmd-db" },
{ .compatible = "qcom,smem" },
{ .compatible = "ramoops" },
{ .compatible = "nvmem-rmem" },
{ .compatible = "google,open-dice" },
{}
};
static int __init of_platform_default_populate_init(void)
{
struct device_node *node;
device_links_supplier_sync_state_pause();
if (!of_have_populated_dt())
return -ENODEV;
if (IS_ENABLED(CONFIG_PPC)) {
struct device_node *boot_display = NULL;
struct platform_device *dev;
int ret;
/* Check if we have a MacOS display without a node spec */
if (of_get_property(of_chosen, "linux,bootx-noscreen", NULL)) {
/*
* The old code tried to work out which node was the MacOS
* display based on the address. I'm dropping that since the
* lack of a node spec only happens with old BootX versions
* (users can update) and with this code, they'll still get
* a display (just not the palette hacks).
*/
dev = platform_device_alloc("bootx-noscreen", 0);
if (WARN_ON(!dev))
return -ENOMEM;
ret = platform_device_add(dev);
if (WARN_ON(ret)) {
platform_device_put(dev);
return ret;
}
}
/*
* For OF framebuffers, first create the device for the boot display,
* then for the other framebuffers. Only fail for the boot display;
* ignore errors for the rest.
*/
for_each_node_by_type(node, "display") {
if (!of_get_property(node, "linux,opened", NULL) ||
!of_get_property(node, "linux,boot-display", NULL))
continue;
dev = of_platform_device_create(node, "of-display", NULL);
if (WARN_ON(!dev))
return -ENOMEM;
boot_display = node;
break;
}
for_each_node_by_type(node, "display") {
if (!of_get_property(node, "linux,opened", NULL) || node == boot_display)
continue;
of_platform_device_create(node, "of-display", NULL);
}
} else {
/*
* Handle certain compatibles explicitly, since we don't want to create
* platform_devices for every node in /reserved-memory with a
* "compatible",
*/
for_each_matching_node(node, reserved_mem_matches)
of_platform_device_create(node, NULL, NULL);
node = of_find_node_by_path("/firmware");
if (node) {
of_platform_populate(node, NULL, NULL, NULL);
of_node_put(node);
}
node = of_get_compatible_child(of_chosen, "simple-framebuffer");
of_platform_device_create(node, NULL, NULL);
of_node_put(node);
/* Populate everything else. */
of_platform_default_populate(NULL, NULL, NULL);
}
return 0;
}
arch_initcall_sync(of_platform_default_populate_init);
static int __init of_platform_sync_state_init(void)
{
device_links_supplier_sync_state_resume();
return 0;
}
late_initcall_sync(of_platform_sync_state_init);
int of_platform_device_destroy(struct device *dev, void *data)
{
/* Do not touch devices not populated from the device tree */
if (!dev->of_node || !of_node_check_flag(dev->of_node, OF_POPULATED))
return 0;
/* Recurse for any nodes that were treated as busses */
if (of_node_check_flag(dev->of_node, OF_POPULATED_BUS))
device_for_each_child(dev, NULL, of_platform_device_destroy);
of_node_clear_flag(dev->of_node, OF_POPULATED);
of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
if (dev->bus == &platform_bus_type)
platform_device_unregister(to_platform_device(dev));
#ifdef CONFIG_ARM_AMBA
else if (dev->bus == &amba_bustype)
amba_device_unregister(to_amba_device(dev));
#endif
return 0;
}
EXPORT_SYMBOL_GPL(of_platform_device_destroy);
/**
* of_platform_depopulate() - Remove devices populated from device tree
* @parent: device which children will be removed
*
* Complementary to of_platform_populate(), this function removes children
* of the given device (and, recurrently, their children) that have been
* created from their respective device tree nodes (and only those,
* leaving others - eg. manually created - unharmed).
*/
void of_platform_depopulate(struct device *parent)
{
if (parent->of_node && of_node_check_flag(parent->of_node, OF_POPULATED_BUS)) {
device_for_each_child_reverse(parent, NULL, of_platform_device_destroy);
of_node_clear_flag(parent->of_node, OF_POPULATED_BUS);
}
}
EXPORT_SYMBOL_GPL(of_platform_depopulate);
static void devm_of_platform_populate_release(struct device *dev, void *res)
{
of_platform_depopulate(*(struct device **)res);
}
/**
* devm_of_platform_populate() - Populate platform_devices from device tree data
* @dev: device that requested to populate from device tree data
*
* Similar to of_platform_populate(), but will automatically call
* of_platform_depopulate() when the device is unbound from the bus.
*
* Return: 0 on success, < 0 on failure.
*/
int devm_of_platform_populate(struct device *dev)
{
struct device **ptr;
int ret;
if (!dev)
return -EINVAL;
ptr = devres_alloc(devm_of_platform_populate_release,
sizeof(*ptr), GFP_KERNEL);
if (!ptr)
return -ENOMEM;
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
devres_free(ptr);
} else {
*ptr = dev;
devres_add(dev, ptr);
}
return ret;
}
EXPORT_SYMBOL_GPL(devm_of_platform_populate);
static int devm_of_platform_match(struct device *dev, void *res, void *data)
{
struct device **ptr = res;
if (!ptr) {
WARN_ON(!ptr);
return 0;
}
return *ptr == data;
}
/**
* devm_of_platform_depopulate() - Remove devices populated from device tree
* @dev: device that requested to depopulate from device tree data
*
* Complementary to devm_of_platform_populate(), this function removes children
* of the given device (and, recurrently, their children) that have been
* created from their respective device tree nodes (and only those,
* leaving others - eg. manually created - unharmed).
*/
void devm_of_platform_depopulate(struct device *dev)
{
int ret;
ret = devres_release(dev, devm_of_platform_populate_release,
devm_of_platform_match, dev);
WARN_ON(ret);
}
EXPORT_SYMBOL_GPL(devm_of_platform_depopulate);
#ifdef CONFIG_OF_DYNAMIC
static int of_platform_notify(struct notifier_block *nb,
unsigned long action, void *arg)
{
struct of_reconfig_data *rd = arg;
struct platform_device *pdev_parent, *pdev;
bool children_left;
switch (of_reconfig_get_state_change(action, rd)) {
case OF_RECONFIG_CHANGE_ADD:
/* verify that the parent is a bus */
if (!of_node_check_flag(rd->dn->parent, OF_POPULATED_BUS))
return NOTIFY_OK; /* not for us */
/* already populated? (driver using of_populate manually) */
if (of_node_check_flag(rd->dn, OF_POPULATED))
return NOTIFY_OK;
/* pdev_parent may be NULL when no bus platform device */
pdev_parent = of_find_device_by_node(rd->dn->parent);
pdev = of_platform_device_create(rd->dn, NULL,
pdev_parent ? &pdev_parent->dev : NULL);
platform_device_put(pdev_parent);
if (pdev == NULL) {
pr_err("%s: failed to create for '%pOF'\n",
__func__, rd->dn);
/* of_platform_device_create tosses the error code */
return notifier_from_errno(-EINVAL);
}
break;
case OF_RECONFIG_CHANGE_REMOVE:
/* already depopulated? */
if (!of_node_check_flag(rd->dn, OF_POPULATED))
return NOTIFY_OK;
/* find our device by node */
pdev = of_find_device_by_node(rd->dn);
if (pdev == NULL)
return NOTIFY_OK; /* no? not meant for us */
/* unregister takes one ref away */
of_platform_device_destroy(&pdev->dev, &children_left);
/* and put the reference of the find */
platform_device_put(pdev);
break;
}
return NOTIFY_OK;
}
static struct notifier_block platform_of_notifier = {
.notifier_call = of_platform_notify,
};
void of_platform_register_reconfig_notifier(void)
{
WARN_ON(of_reconfig_notifier_register(&platform_of_notifier));
}
#endif /* CONFIG_OF_DYNAMIC */
#endif /* CONFIG_OF_ADDRESS */