forked from Minki/linux
7f3704e992
This implements proper short slot handling and adds code to program the hardware for the correct response rates derived from the basic rate set for the current BSS. (port from b43) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
834 lines
26 KiB
C
834 lines
26 KiB
C
#ifndef B43legacy_H_
|
|
#define B43legacy_H_
|
|
|
|
#include <linux/hw_random.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/stringify.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/atomic.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/ssb/ssb_driver_chipcommon.h>
|
|
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "debugfs.h"
|
|
#include "leds.h"
|
|
#include "rfkill.h"
|
|
#include "phy.h"
|
|
|
|
|
|
/* The unique identifier of the firmware that's officially supported by this
|
|
* driver version. */
|
|
#define B43legacy_SUPPORTED_FIRMWARE_ID "FW10"
|
|
|
|
#define B43legacy_IRQWAIT_MAX_RETRIES 20
|
|
|
|
#define B43legacy_RX_MAX_SSI 60 /* best guess at max ssi */
|
|
|
|
/* MMIO offsets */
|
|
#define B43legacy_MMIO_DMA0_REASON 0x20
|
|
#define B43legacy_MMIO_DMA0_IRQ_MASK 0x24
|
|
#define B43legacy_MMIO_DMA1_REASON 0x28
|
|
#define B43legacy_MMIO_DMA1_IRQ_MASK 0x2C
|
|
#define B43legacy_MMIO_DMA2_REASON 0x30
|
|
#define B43legacy_MMIO_DMA2_IRQ_MASK 0x34
|
|
#define B43legacy_MMIO_DMA3_REASON 0x38
|
|
#define B43legacy_MMIO_DMA3_IRQ_MASK 0x3C
|
|
#define B43legacy_MMIO_DMA4_REASON 0x40
|
|
#define B43legacy_MMIO_DMA4_IRQ_MASK 0x44
|
|
#define B43legacy_MMIO_DMA5_REASON 0x48
|
|
#define B43legacy_MMIO_DMA5_IRQ_MASK 0x4C
|
|
#define B43legacy_MMIO_MACCTL 0x120 /* MAC control */
|
|
#define B43legacy_MMIO_MACCMD 0x124 /* MAC command */
|
|
#define B43legacy_MMIO_GEN_IRQ_REASON 0x128
|
|
#define B43legacy_MMIO_GEN_IRQ_MASK 0x12C
|
|
#define B43legacy_MMIO_RAM_CONTROL 0x130
|
|
#define B43legacy_MMIO_RAM_DATA 0x134
|
|
#define B43legacy_MMIO_PS_STATUS 0x140
|
|
#define B43legacy_MMIO_RADIO_HWENABLED_HI 0x158
|
|
#define B43legacy_MMIO_SHM_CONTROL 0x160
|
|
#define B43legacy_MMIO_SHM_DATA 0x164
|
|
#define B43legacy_MMIO_SHM_DATA_UNALIGNED 0x166
|
|
#define B43legacy_MMIO_XMITSTAT_0 0x170
|
|
#define B43legacy_MMIO_XMITSTAT_1 0x174
|
|
#define B43legacy_MMIO_REV3PLUS_TSF_LOW 0x180 /* core rev >= 3 only */
|
|
#define B43legacy_MMIO_REV3PLUS_TSF_HIGH 0x184 /* core rev >= 3 only */
|
|
|
|
/* 32-bit DMA */
|
|
#define B43legacy_MMIO_DMA32_BASE0 0x200
|
|
#define B43legacy_MMIO_DMA32_BASE1 0x220
|
|
#define B43legacy_MMIO_DMA32_BASE2 0x240
|
|
#define B43legacy_MMIO_DMA32_BASE3 0x260
|
|
#define B43legacy_MMIO_DMA32_BASE4 0x280
|
|
#define B43legacy_MMIO_DMA32_BASE5 0x2A0
|
|
/* 64-bit DMA */
|
|
#define B43legacy_MMIO_DMA64_BASE0 0x200
|
|
#define B43legacy_MMIO_DMA64_BASE1 0x240
|
|
#define B43legacy_MMIO_DMA64_BASE2 0x280
|
|
#define B43legacy_MMIO_DMA64_BASE3 0x2C0
|
|
#define B43legacy_MMIO_DMA64_BASE4 0x300
|
|
#define B43legacy_MMIO_DMA64_BASE5 0x340
|
|
/* PIO */
|
|
#define B43legacy_MMIO_PIO1_BASE 0x300
|
|
#define B43legacy_MMIO_PIO2_BASE 0x310
|
|
#define B43legacy_MMIO_PIO3_BASE 0x320
|
|
#define B43legacy_MMIO_PIO4_BASE 0x330
|
|
|
|
#define B43legacy_MMIO_PHY_VER 0x3E0
|
|
#define B43legacy_MMIO_PHY_RADIO 0x3E2
|
|
#define B43legacy_MMIO_PHY0 0x3E6
|
|
#define B43legacy_MMIO_ANTENNA 0x3E8
|
|
#define B43legacy_MMIO_CHANNEL 0x3F0
|
|
#define B43legacy_MMIO_CHANNEL_EXT 0x3F4
|
|
#define B43legacy_MMIO_RADIO_CONTROL 0x3F6
|
|
#define B43legacy_MMIO_RADIO_DATA_HIGH 0x3F8
|
|
#define B43legacy_MMIO_RADIO_DATA_LOW 0x3FA
|
|
#define B43legacy_MMIO_PHY_CONTROL 0x3FC
|
|
#define B43legacy_MMIO_PHY_DATA 0x3FE
|
|
#define B43legacy_MMIO_MACFILTER_CONTROL 0x420
|
|
#define B43legacy_MMIO_MACFILTER_DATA 0x422
|
|
#define B43legacy_MMIO_RCMTA_COUNT 0x43C /* Receive Match Transmitter Addr */
|
|
#define B43legacy_MMIO_RADIO_HWENABLED_LO 0x49A
|
|
#define B43legacy_MMIO_GPIO_CONTROL 0x49C
|
|
#define B43legacy_MMIO_GPIO_MASK 0x49E
|
|
#define B43legacy_MMIO_TSF_CFP_PRETBTT 0x612
|
|
#define B43legacy_MMIO_TSF_0 0x632 /* core rev < 3 only */
|
|
#define B43legacy_MMIO_TSF_1 0x634 /* core rev < 3 only */
|
|
#define B43legacy_MMIO_TSF_2 0x636 /* core rev < 3 only */
|
|
#define B43legacy_MMIO_TSF_3 0x638 /* core rev < 3 only */
|
|
#define B43legacy_MMIO_RNG 0x65A
|
|
#define B43legacy_MMIO_POWERUP_DELAY 0x6A8
|
|
|
|
/* SPROM boardflags_lo values */
|
|
#define B43legacy_BFL_PACTRL 0x0002
|
|
#define B43legacy_BFL_RSSI 0x0008
|
|
#define B43legacy_BFL_EXTLNA 0x1000
|
|
|
|
/* GPIO register offset, in both ChipCommon and PCI core. */
|
|
#define B43legacy_GPIO_CONTROL 0x6c
|
|
|
|
/* SHM Routing */
|
|
#define B43legacy_SHM_SHARED 0x0001
|
|
#define B43legacy_SHM_WIRELESS 0x0002
|
|
#define B43legacy_SHM_HW 0x0004
|
|
#define B43legacy_SHM_UCODE 0x0300
|
|
|
|
/* SHM Routing modifiers */
|
|
#define B43legacy_SHM_AUTOINC_R 0x0200 /* Read Auto-increment */
|
|
#define B43legacy_SHM_AUTOINC_W 0x0100 /* Write Auto-increment */
|
|
#define B43legacy_SHM_AUTOINC_RW (B43legacy_SHM_AUTOINC_R | \
|
|
B43legacy_SHM_AUTOINC_W)
|
|
|
|
/* Misc SHM_SHARED offsets */
|
|
#define B43legacy_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */
|
|
#define B43legacy_SHM_SH_HOSTFLO 0x005E /* Hostflags ucode opts (low) */
|
|
#define B43legacy_SHM_SH_HOSTFHI 0x0060 /* Hostflags ucode opts (high) */
|
|
/* SHM_SHARED crypto engine */
|
|
#define B43legacy_SHM_SH_KEYIDXBLOCK 0x05D4 /* Key index/algorithm block */
|
|
/* SHM_SHARED beacon/AP variables */
|
|
#define B43legacy_SHM_SH_DTIMP 0x0012 /* DTIM period */
|
|
#define B43legacy_SHM_SH_BTL0 0x0018 /* Beacon template length 0 */
|
|
#define B43legacy_SHM_SH_BTL1 0x001A /* Beacon template length 1 */
|
|
#define B43legacy_SHM_SH_BTSFOFF 0x001C /* Beacon TSF offset */
|
|
#define B43legacy_SHM_SH_TIMPOS 0x001E /* TIM position in beacon */
|
|
#define B43legacy_SHM_SH_BEACPHYCTL 0x0054 /* Beacon PHY TX control word */
|
|
/* SHM_SHARED ACK/CTS control */
|
|
#define B43legacy_SHM_SH_ACKCTSPHYCTL 0x0022 /* ACK/CTS PHY control word */
|
|
/* SHM_SHARED probe response variables */
|
|
#define B43legacy_SHM_SH_PRTLEN 0x004A /* Probe Response template length */
|
|
#define B43legacy_SHM_SH_PRMAXTIME 0x0074 /* Probe Response max time */
|
|
#define B43legacy_SHM_SH_PRPHYCTL 0x0188 /* Probe Resp PHY TX control */
|
|
/* SHM_SHARED rate tables */
|
|
#define B43legacy_SHM_SH_OFDMDIRECT 0x0480 /* Pointer to OFDM direct map */
|
|
#define B43legacy_SHM_SH_OFDMBASIC 0x04A0 /* Pointer to OFDM basic rate map */
|
|
#define B43legacy_SHM_SH_CCKDIRECT 0x04C0 /* Pointer to CCK direct map */
|
|
#define B43legacy_SHM_SH_CCKBASIC 0x04E0 /* Pointer to CCK basic rate map */
|
|
/* SHM_SHARED microcode soft registers */
|
|
#define B43legacy_SHM_SH_UCODEREV 0x0000 /* Microcode revision */
|
|
#define B43legacy_SHM_SH_UCODEPATCH 0x0002 /* Microcode patchlevel */
|
|
#define B43legacy_SHM_SH_UCODEDATE 0x0004 /* Microcode date */
|
|
#define B43legacy_SHM_SH_UCODETIME 0x0006 /* Microcode time */
|
|
#define B43legacy_SHM_SH_SPUWKUP 0x0094 /* pre-wakeup for synth PU in us */
|
|
#define B43legacy_SHM_SH_PRETBTT 0x0096 /* pre-TBTT in us */
|
|
|
|
#define B43legacy_UCODEFLAGS_OFFSET 0x005E
|
|
|
|
/* Hardware Radio Enable masks */
|
|
#define B43legacy_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
|
|
#define B43legacy_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
|
|
|
|
/* HostFlags. See b43legacy_hf_read/write() */
|
|
#define B43legacy_HF_SYMW 0x00000002 /* G-PHY SYM workaround */
|
|
#define B43legacy_HF_GDCW 0x00000020 /* G-PHY DV cancel filter */
|
|
#define B43legacy_HF_OFDMPABOOST 0x00000040 /* Enable PA boost OFDM */
|
|
#define B43legacy_HF_EDCF 0x00000100 /* on if WME/MAC suspended */
|
|
|
|
/* MacFilter offsets. */
|
|
#define B43legacy_MACFILTER_SELF 0x0000
|
|
#define B43legacy_MACFILTER_BSSID 0x0003
|
|
#define B43legacy_MACFILTER_MAC 0x0010
|
|
|
|
/* PHYVersioning */
|
|
#define B43legacy_PHYTYPE_B 0x01
|
|
#define B43legacy_PHYTYPE_G 0x02
|
|
|
|
/* PHYRegisters */
|
|
#define B43legacy_PHY_G_LO_CONTROL 0x0810
|
|
#define B43legacy_PHY_ILT_G_CTRL 0x0472
|
|
#define B43legacy_PHY_ILT_G_DATA1 0x0473
|
|
#define B43legacy_PHY_ILT_G_DATA2 0x0474
|
|
#define B43legacy_PHY_G_PCTL 0x0029
|
|
#define B43legacy_PHY_RADIO_BITFIELD 0x0401
|
|
#define B43legacy_PHY_G_CRS 0x0429
|
|
#define B43legacy_PHY_NRSSILT_CTRL 0x0803
|
|
#define B43legacy_PHY_NRSSILT_DATA 0x0804
|
|
|
|
/* RadioRegisters */
|
|
#define B43legacy_RADIOCTL_ID 0x01
|
|
|
|
/* MAC Control bitfield */
|
|
#define B43legacy_MACCTL_ENABLED 0x00000001 /* MAC Enabled */
|
|
#define B43legacy_MACCTL_PSM_RUN 0x00000002 /* Run Microcode */
|
|
#define B43legacy_MACCTL_PSM_JMP0 0x00000004 /* Microcode jump to 0 */
|
|
#define B43legacy_MACCTL_SHM_ENABLED 0x00000100 /* SHM Enabled */
|
|
#define B43legacy_MACCTL_IHR_ENABLED 0x00000400 /* IHR Region Enabled */
|
|
#define B43legacy_MACCTL_BE 0x00010000 /* Big Endian mode */
|
|
#define B43legacy_MACCTL_INFRA 0x00020000 /* Infrastructure mode */
|
|
#define B43legacy_MACCTL_AP 0x00040000 /* AccessPoint mode */
|
|
#define B43legacy_MACCTL_RADIOLOCK 0x00080000 /* Radio lock */
|
|
#define B43legacy_MACCTL_BEACPROMISC 0x00100000 /* Beacon Promiscuous */
|
|
#define B43legacy_MACCTL_KEEP_BADPLCP 0x00200000 /* Keep bad PLCP frames */
|
|
#define B43legacy_MACCTL_KEEP_CTL 0x00400000 /* Keep control frames */
|
|
#define B43legacy_MACCTL_KEEP_BAD 0x00800000 /* Keep bad frames (FCS) */
|
|
#define B43legacy_MACCTL_PROMISC 0x01000000 /* Promiscuous mode */
|
|
#define B43legacy_MACCTL_HWPS 0x02000000 /* Hardware Power Saving */
|
|
#define B43legacy_MACCTL_AWAKE 0x04000000 /* Device is awake */
|
|
#define B43legacy_MACCTL_TBTTHOLD 0x10000000 /* TBTT Hold */
|
|
#define B43legacy_MACCTL_GMODE 0x80000000 /* G Mode */
|
|
|
|
/* MAC Command bitfield */
|
|
#define B43legacy_MACCMD_BEACON0_VALID 0x00000001 /* Beacon 0 in template RAM is busy/valid */
|
|
#define B43legacy_MACCMD_BEACON1_VALID 0x00000002 /* Beacon 1 in template RAM is busy/valid */
|
|
#define B43legacy_MACCMD_DFQ_VALID 0x00000004 /* Directed frame queue valid (IBSS PS mode, ATIM) */
|
|
#define B43legacy_MACCMD_CCA 0x00000008 /* Clear channel assessment */
|
|
#define B43legacy_MACCMD_BGNOISE 0x00000010 /* Background noise */
|
|
|
|
/* 802.11 core specific TM State Low flags */
|
|
#define B43legacy_TMSLOW_GMODE 0x20000000 /* G Mode Enable */
|
|
#define B43legacy_TMSLOW_PLLREFSEL 0x00200000 /* PLL Freq Ref Select */
|
|
#define B43legacy_TMSLOW_MACPHYCLKEN 0x00100000 /* MAC PHY Clock Ctrl Enbl */
|
|
#define B43legacy_TMSLOW_PHYRESET 0x00080000 /* PHY Reset */
|
|
#define B43legacy_TMSLOW_PHYCLKEN 0x00040000 /* PHY Clock Enable */
|
|
|
|
/* 802.11 core specific TM State High flags */
|
|
#define B43legacy_TMSHIGH_FCLOCK 0x00040000 /* Fast Clock Available */
|
|
#define B43legacy_TMSHIGH_GPHY 0x00010000 /* G-PHY avail (rev >= 5) */
|
|
|
|
#define B43legacy_UCODEFLAG_AUTODIV 0x0001
|
|
|
|
/* Generic-Interrupt reasons. */
|
|
#define B43legacy_IRQ_MAC_SUSPENDED 0x00000001
|
|
#define B43legacy_IRQ_BEACON 0x00000002
|
|
#define B43legacy_IRQ_TBTT_INDI 0x00000004 /* Target Beacon Transmit Time */
|
|
#define B43legacy_IRQ_BEACON_TX_OK 0x00000008
|
|
#define B43legacy_IRQ_BEACON_CANCEL 0x00000010
|
|
#define B43legacy_IRQ_ATIM_END 0x00000020
|
|
#define B43legacy_IRQ_PMQ 0x00000040
|
|
#define B43legacy_IRQ_PIO_WORKAROUND 0x00000100
|
|
#define B43legacy_IRQ_MAC_TXERR 0x00000200
|
|
#define B43legacy_IRQ_PHY_TXERR 0x00000800
|
|
#define B43legacy_IRQ_PMEVENT 0x00001000
|
|
#define B43legacy_IRQ_TIMER0 0x00002000
|
|
#define B43legacy_IRQ_TIMER1 0x00004000
|
|
#define B43legacy_IRQ_DMA 0x00008000
|
|
#define B43legacy_IRQ_TXFIFO_FLUSH_OK 0x00010000
|
|
#define B43legacy_IRQ_CCA_MEASURE_OK 0x00020000
|
|
#define B43legacy_IRQ_NOISESAMPLE_OK 0x00040000
|
|
#define B43legacy_IRQ_UCODE_DEBUG 0x08000000
|
|
#define B43legacy_IRQ_RFKILL 0x10000000
|
|
#define B43legacy_IRQ_TX_OK 0x20000000
|
|
#define B43legacy_IRQ_PHY_G_CHANGED 0x40000000
|
|
#define B43legacy_IRQ_TIMEOUT 0x80000000
|
|
|
|
#define B43legacy_IRQ_ALL 0xFFFFFFFF
|
|
#define B43legacy_IRQ_MASKTEMPLATE (B43legacy_IRQ_MAC_SUSPENDED | \
|
|
B43legacy_IRQ_BEACON | \
|
|
B43legacy_IRQ_TBTT_INDI | \
|
|
B43legacy_IRQ_ATIM_END | \
|
|
B43legacy_IRQ_PMQ | \
|
|
B43legacy_IRQ_MAC_TXERR | \
|
|
B43legacy_IRQ_PHY_TXERR | \
|
|
B43legacy_IRQ_DMA | \
|
|
B43legacy_IRQ_TXFIFO_FLUSH_OK | \
|
|
B43legacy_IRQ_NOISESAMPLE_OK | \
|
|
B43legacy_IRQ_UCODE_DEBUG | \
|
|
B43legacy_IRQ_RFKILL | \
|
|
B43legacy_IRQ_TX_OK)
|
|
|
|
/* Device specific rate values.
|
|
* The actual values defined here are (rate_in_mbps * 2).
|
|
* Some code depends on this. Don't change it. */
|
|
#define B43legacy_CCK_RATE_1MB 2
|
|
#define B43legacy_CCK_RATE_2MB 4
|
|
#define B43legacy_CCK_RATE_5MB 11
|
|
#define B43legacy_CCK_RATE_11MB 22
|
|
#define B43legacy_OFDM_RATE_6MB 12
|
|
#define B43legacy_OFDM_RATE_9MB 18
|
|
#define B43legacy_OFDM_RATE_12MB 24
|
|
#define B43legacy_OFDM_RATE_18MB 36
|
|
#define B43legacy_OFDM_RATE_24MB 48
|
|
#define B43legacy_OFDM_RATE_36MB 72
|
|
#define B43legacy_OFDM_RATE_48MB 96
|
|
#define B43legacy_OFDM_RATE_54MB 108
|
|
/* Convert a b43legacy rate value to a rate in 100kbps */
|
|
#define B43legacy_RATE_TO_100KBPS(rate) (((rate) * 10) / 2)
|
|
|
|
|
|
#define B43legacy_DEFAULT_SHORT_RETRY_LIMIT 7
|
|
#define B43legacy_DEFAULT_LONG_RETRY_LIMIT 4
|
|
|
|
#define B43legacy_PHY_TX_BADNESS_LIMIT 1000
|
|
|
|
/* Max size of a security key */
|
|
#define B43legacy_SEC_KEYSIZE 16
|
|
/* Security algorithms. */
|
|
enum {
|
|
B43legacy_SEC_ALGO_NONE = 0, /* unencrypted, as of TX header. */
|
|
B43legacy_SEC_ALGO_WEP40,
|
|
B43legacy_SEC_ALGO_TKIP,
|
|
B43legacy_SEC_ALGO_AES,
|
|
B43legacy_SEC_ALGO_WEP104,
|
|
B43legacy_SEC_ALGO_AES_LEGACY,
|
|
};
|
|
|
|
/* Core Information Registers */
|
|
#define B43legacy_CIR_BASE 0xf00
|
|
#define B43legacy_CIR_SBTPSFLAG (B43legacy_CIR_BASE + 0x18)
|
|
#define B43legacy_CIR_SBIMSTATE (B43legacy_CIR_BASE + 0x90)
|
|
#define B43legacy_CIR_SBINTVEC (B43legacy_CIR_BASE + 0x94)
|
|
#define B43legacy_CIR_SBTMSTATELOW (B43legacy_CIR_BASE + 0x98)
|
|
#define B43legacy_CIR_SBTMSTATEHIGH (B43legacy_CIR_BASE + 0x9c)
|
|
#define B43legacy_CIR_SBIMCONFIGLOW (B43legacy_CIR_BASE + 0xa8)
|
|
#define B43legacy_CIR_SB_ID_HI (B43legacy_CIR_BASE + 0xfc)
|
|
|
|
/* sbtmstatehigh state flags */
|
|
#define B43legacy_SBTMSTATEHIGH_SERROR 0x00000001
|
|
#define B43legacy_SBTMSTATEHIGH_BUSY 0x00000004
|
|
#define B43legacy_SBTMSTATEHIGH_TIMEOUT 0x00000020
|
|
#define B43legacy_SBTMSTATEHIGH_G_PHY_AVAIL 0x00010000
|
|
#define B43legacy_SBTMSTATEHIGH_COREFLAGS 0x1FFF0000
|
|
#define B43legacy_SBTMSTATEHIGH_DMA64BIT 0x10000000
|
|
#define B43legacy_SBTMSTATEHIGH_GATEDCLK 0x20000000
|
|
#define B43legacy_SBTMSTATEHIGH_BISTFAILED 0x40000000
|
|
#define B43legacy_SBTMSTATEHIGH_BISTCOMPLETE 0x80000000
|
|
|
|
/* sbimstate flags */
|
|
#define B43legacy_SBIMSTATE_IB_ERROR 0x20000
|
|
#define B43legacy_SBIMSTATE_TIMEOUT 0x40000
|
|
|
|
#define PFX KBUILD_MODNAME ": "
|
|
#ifdef assert
|
|
# undef assert
|
|
#endif
|
|
#ifdef CONFIG_B43LEGACY_DEBUG
|
|
# define B43legacy_WARN_ON(x) WARN_ON(x)
|
|
# define B43legacy_BUG_ON(expr) \
|
|
do { \
|
|
if (unlikely((expr))) { \
|
|
printk(KERN_INFO PFX "Test (%s) failed\n", \
|
|
#expr); \
|
|
BUG_ON(expr); \
|
|
} \
|
|
} while (0)
|
|
# define B43legacy_DEBUG 1
|
|
#else
|
|
/* This will evaluate the argument even if debugging is disabled. */
|
|
static inline bool __b43legacy_warn_on_dummy(bool x) { return x; }
|
|
# define B43legacy_WARN_ON(x) __b43legacy_warn_on_dummy(unlikely(!!(x)))
|
|
# define B43legacy_BUG_ON(x) do { /* nothing */ } while (0)
|
|
# define B43legacy_DEBUG 0
|
|
#endif
|
|
|
|
|
|
struct net_device;
|
|
struct pci_dev;
|
|
struct b43legacy_dmaring;
|
|
struct b43legacy_pioqueue;
|
|
|
|
/* The firmware file header */
|
|
#define B43legacy_FW_TYPE_UCODE 'u'
|
|
#define B43legacy_FW_TYPE_PCM 'p'
|
|
#define B43legacy_FW_TYPE_IV 'i'
|
|
struct b43legacy_fw_header {
|
|
/* File type */
|
|
u8 type;
|
|
/* File format version */
|
|
u8 ver;
|
|
u8 __padding[2];
|
|
/* Size of the data. For ucode and PCM this is in bytes.
|
|
* For IV this is number-of-ivs. */
|
|
__be32 size;
|
|
} __attribute__((__packed__));
|
|
|
|
/* Initial Value file format */
|
|
#define B43legacy_IV_OFFSET_MASK 0x7FFF
|
|
#define B43legacy_IV_32BIT 0x8000
|
|
struct b43legacy_iv {
|
|
__be16 offset_size;
|
|
union {
|
|
__be16 d16;
|
|
__be32 d32;
|
|
} data __attribute__((__packed__));
|
|
} __attribute__((__packed__));
|
|
|
|
#define B43legacy_PHYMODE(phytype) (1 << (phytype))
|
|
#define B43legacy_PHYMODE_B B43legacy_PHYMODE \
|
|
((B43legacy_PHYTYPE_B))
|
|
#define B43legacy_PHYMODE_G B43legacy_PHYMODE \
|
|
((B43legacy_PHYTYPE_G))
|
|
|
|
/* Value pair to measure the LocalOscillator. */
|
|
struct b43legacy_lopair {
|
|
s8 low;
|
|
s8 high;
|
|
u8 used:1;
|
|
};
|
|
#define B43legacy_LO_COUNT (14*4)
|
|
|
|
struct b43legacy_phy {
|
|
/* Possible PHYMODEs on this PHY */
|
|
u8 possible_phymodes;
|
|
/* GMODE bit enabled in MACCTL? */
|
|
bool gmode;
|
|
|
|
/* Analog Type */
|
|
u8 analog;
|
|
/* B43legacy_PHYTYPE_ */
|
|
u8 type;
|
|
/* PHY revision number. */
|
|
u8 rev;
|
|
|
|
u16 antenna_diversity;
|
|
u16 savedpctlreg;
|
|
/* Radio versioning */
|
|
u16 radio_manuf; /* Radio manufacturer */
|
|
u16 radio_ver; /* Radio version */
|
|
u8 calibrated:1;
|
|
u8 radio_rev; /* Radio revision */
|
|
|
|
bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */
|
|
|
|
/* ACI (adjacent channel interference) flags. */
|
|
bool aci_enable;
|
|
bool aci_wlan_automatic;
|
|
bool aci_hw_rssi;
|
|
|
|
/* Radio switched on/off */
|
|
bool radio_on;
|
|
struct {
|
|
/* Values saved when turning the radio off.
|
|
* They are needed when turning it on again. */
|
|
bool valid;
|
|
u16 rfover;
|
|
u16 rfoverval;
|
|
} radio_off_context;
|
|
|
|
u16 minlowsig[2];
|
|
u16 minlowsigpos[2];
|
|
|
|
/* LO Measurement Data.
|
|
* Use b43legacy_get_lopair() to get a value.
|
|
*/
|
|
struct b43legacy_lopair *_lo_pairs;
|
|
/* TSSI to dBm table in use */
|
|
const s8 *tssi2dbm;
|
|
/* idle TSSI value */
|
|
s8 idle_tssi;
|
|
/* Target idle TSSI */
|
|
int tgt_idle_tssi;
|
|
/* Current idle TSSI */
|
|
int cur_idle_tssi;
|
|
|
|
/* LocalOscillator control values. */
|
|
struct b43legacy_txpower_lo_control *lo_control;
|
|
/* Values from b43legacy_calc_loopback_gain() */
|
|
s16 max_lb_gain; /* Maximum Loopback gain in hdB */
|
|
s16 trsw_rx_gain; /* TRSW RX gain in hdB */
|
|
s16 lna_lod_gain; /* LNA lod */
|
|
s16 lna_gain; /* LNA */
|
|
s16 pga_gain; /* PGA */
|
|
|
|
/* Desired TX power level (in dBm). This is set by the user and
|
|
* adjusted in b43legacy_phy_xmitpower(). */
|
|
u8 power_level;
|
|
|
|
/* Values from b43legacy_calc_loopback_gain() */
|
|
u16 loopback_gain[2];
|
|
|
|
/* TX Power control values. */
|
|
/* B/G PHY */
|
|
struct {
|
|
/* Current Radio Attenuation for TXpower recalculation. */
|
|
u16 rfatt;
|
|
/* Current Baseband Attenuation for TXpower recalculation. */
|
|
u16 bbatt;
|
|
/* Current TXpower control value for TXpower recalculation. */
|
|
u16 txctl1;
|
|
u16 txctl2;
|
|
};
|
|
/* A PHY */
|
|
struct {
|
|
u16 txpwr_offset;
|
|
};
|
|
|
|
/* Current Interference Mitigation mode */
|
|
int interfmode;
|
|
/* Stack of saved values from the Interference Mitigation code.
|
|
* Each value in the stack is layed out as follows:
|
|
* bit 0-11: offset
|
|
* bit 12-15: register ID
|
|
* bit 16-32: value
|
|
* register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT
|
|
*/
|
|
#define B43legacy_INTERFSTACK_SIZE 26
|
|
u32 interfstack[B43legacy_INTERFSTACK_SIZE];
|
|
|
|
/* Saved values from the NRSSI Slope calculation */
|
|
s16 nrssi[2];
|
|
s32 nrssislope;
|
|
/* In memory nrssi lookup table. */
|
|
s8 nrssi_lt[64];
|
|
|
|
/* current channel */
|
|
u8 channel;
|
|
|
|
u16 lofcal;
|
|
|
|
u16 initval;
|
|
|
|
/* PHY TX errors counter. */
|
|
atomic_t txerr_cnt;
|
|
|
|
#if B43legacy_DEBUG
|
|
/* Manual TX-power control enabled? */
|
|
bool manual_txpower_control;
|
|
/* PHY registers locked by b43legacy_phy_lock()? */
|
|
bool phy_locked;
|
|
#endif /* B43legacy_DEBUG */
|
|
};
|
|
|
|
/* Data structures for DMA transmission, per 80211 core. */
|
|
struct b43legacy_dma {
|
|
struct b43legacy_dmaring *tx_ring0;
|
|
struct b43legacy_dmaring *tx_ring1;
|
|
struct b43legacy_dmaring *tx_ring2;
|
|
struct b43legacy_dmaring *tx_ring3;
|
|
struct b43legacy_dmaring *tx_ring4;
|
|
struct b43legacy_dmaring *tx_ring5;
|
|
|
|
struct b43legacy_dmaring *rx_ring0;
|
|
struct b43legacy_dmaring *rx_ring3; /* only on core.rev < 5 */
|
|
};
|
|
|
|
/* Data structures for PIO transmission, per 80211 core. */
|
|
struct b43legacy_pio {
|
|
struct b43legacy_pioqueue *queue0;
|
|
struct b43legacy_pioqueue *queue1;
|
|
struct b43legacy_pioqueue *queue2;
|
|
struct b43legacy_pioqueue *queue3;
|
|
};
|
|
|
|
/* Context information for a noise calculation (Link Quality). */
|
|
struct b43legacy_noise_calculation {
|
|
u8 channel_at_start;
|
|
bool calculation_running;
|
|
u8 nr_samples;
|
|
s8 samples[8][4];
|
|
};
|
|
|
|
struct b43legacy_stats {
|
|
u8 link_noise;
|
|
/* Store the last TX/RX times here for updating the leds. */
|
|
unsigned long last_tx;
|
|
unsigned long last_rx;
|
|
};
|
|
|
|
struct b43legacy_key {
|
|
void *keyconf;
|
|
bool enabled;
|
|
u8 algorithm;
|
|
};
|
|
|
|
struct b43legacy_wldev;
|
|
|
|
/* Data structure for the WLAN parts (802.11 cores) of the b43legacy chip. */
|
|
struct b43legacy_wl {
|
|
/* Pointer to the active wireless device on this chip */
|
|
struct b43legacy_wldev *current_dev;
|
|
/* Pointer to the ieee80211 hardware data structure */
|
|
struct ieee80211_hw *hw;
|
|
|
|
spinlock_t irq_lock; /* locks IRQ */
|
|
struct mutex mutex; /* locks wireless core state */
|
|
spinlock_t leds_lock; /* lock for leds */
|
|
|
|
/* We can only have one operating interface (802.11 core)
|
|
* at a time. General information about this interface follows.
|
|
*/
|
|
|
|
struct ieee80211_vif *vif;
|
|
/* MAC address (can be NULL). */
|
|
u8 mac_addr[ETH_ALEN];
|
|
/* Current BSSID (can be NULL). */
|
|
u8 bssid[ETH_ALEN];
|
|
/* Interface type. (IEEE80211_IF_TYPE_XXX) */
|
|
int if_type;
|
|
/* Is the card operating in AP, STA or IBSS mode? */
|
|
bool operating;
|
|
/* filter flags */
|
|
unsigned int filter_flags;
|
|
/* Stats about the wireless interface */
|
|
struct ieee80211_low_level_stats ieee_stats;
|
|
|
|
struct hwrng rng;
|
|
u8 rng_initialized;
|
|
char rng_name[30 + 1];
|
|
|
|
/* The RF-kill button */
|
|
struct b43legacy_rfkill rfkill;
|
|
|
|
/* List of all wireless devices on this chip */
|
|
struct list_head devlist;
|
|
u8 nr_devs;
|
|
|
|
bool radiotap_enabled;
|
|
|
|
/* The beacon we are currently using (AP or IBSS mode).
|
|
* This beacon stuff is protected by the irq_lock. */
|
|
struct sk_buff *current_beacon;
|
|
bool beacon0_uploaded;
|
|
bool beacon1_uploaded;
|
|
};
|
|
|
|
/* Pointers to the firmware data and meta information about it. */
|
|
struct b43legacy_firmware {
|
|
/* Microcode */
|
|
const struct firmware *ucode;
|
|
/* PCM code */
|
|
const struct firmware *pcm;
|
|
/* Initial MMIO values for the firmware */
|
|
const struct firmware *initvals;
|
|
/* Initial MMIO values for the firmware, band-specific */
|
|
const struct firmware *initvals_band;
|
|
/* Firmware revision */
|
|
u16 rev;
|
|
/* Firmware patchlevel */
|
|
u16 patch;
|
|
};
|
|
|
|
/* Device (802.11 core) initialization status. */
|
|
enum {
|
|
B43legacy_STAT_UNINIT = 0, /* Uninitialized. */
|
|
B43legacy_STAT_INITIALIZED = 1, /* Initialized, not yet started. */
|
|
B43legacy_STAT_STARTED = 2, /* Up and running. */
|
|
};
|
|
#define b43legacy_status(wldev) atomic_read(&(wldev)->__init_status)
|
|
#define b43legacy_set_status(wldev, stat) do { \
|
|
atomic_set(&(wldev)->__init_status, (stat)); \
|
|
smp_wmb(); \
|
|
} while (0)
|
|
|
|
/* *** --- HOW LOCKING WORKS IN B43legacy --- ***
|
|
*
|
|
* You should always acquire both, wl->mutex and wl->irq_lock unless:
|
|
* - You don't need to acquire wl->irq_lock, if the interface is stopped.
|
|
* - You don't need to acquire wl->mutex in the IRQ handler, IRQ tasklet
|
|
* and packet TX path (and _ONLY_ there.)
|
|
*/
|
|
|
|
/* Data structure for one wireless device (802.11 core) */
|
|
struct b43legacy_wldev {
|
|
struct ssb_device *dev;
|
|
struct b43legacy_wl *wl;
|
|
|
|
/* The device initialization status.
|
|
* Use b43legacy_status() to query. */
|
|
atomic_t __init_status;
|
|
/* Saved init status for handling suspend. */
|
|
int suspend_init_status;
|
|
|
|
bool __using_pio; /* Using pio rather than dma. */
|
|
bool bad_frames_preempt;/* Use "Bad Frames Preemption". */
|
|
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM). */
|
|
bool short_preamble; /* TRUE if using short preamble. */
|
|
bool radio_hw_enable; /* State of radio hardware enable bit. */
|
|
|
|
/* PHY/Radio device. */
|
|
struct b43legacy_phy phy;
|
|
union {
|
|
/* DMA engines. */
|
|
struct b43legacy_dma dma;
|
|
/* PIO engines. */
|
|
struct b43legacy_pio pio;
|
|
};
|
|
|
|
/* Various statistics about the physical device. */
|
|
struct b43legacy_stats stats;
|
|
|
|
/* The device LEDs. */
|
|
struct b43legacy_led led_tx;
|
|
struct b43legacy_led led_rx;
|
|
struct b43legacy_led led_assoc;
|
|
struct b43legacy_led led_radio;
|
|
|
|
/* Reason code of the last interrupt. */
|
|
u32 irq_reason;
|
|
u32 dma_reason[6];
|
|
/* saved irq enable/disable state bitfield. */
|
|
u32 irq_savedstate;
|
|
/* Link Quality calculation context. */
|
|
struct b43legacy_noise_calculation noisecalc;
|
|
/* if > 0 MAC is suspended. if == 0 MAC is enabled. */
|
|
int mac_suspended;
|
|
|
|
/* Interrupt Service Routine tasklet (bottom-half) */
|
|
struct tasklet_struct isr_tasklet;
|
|
|
|
/* Periodic tasks */
|
|
struct delayed_work periodic_work;
|
|
unsigned int periodic_state;
|
|
|
|
struct work_struct restart_work;
|
|
|
|
/* encryption/decryption */
|
|
u16 ktp; /* Key table pointer */
|
|
u8 max_nr_keys;
|
|
struct b43legacy_key key[58];
|
|
|
|
/* Firmware data */
|
|
struct b43legacy_firmware fw;
|
|
|
|
/* Devicelist in struct b43legacy_wl (all 802.11 cores) */
|
|
struct list_head list;
|
|
|
|
/* Debugging stuff follows. */
|
|
#ifdef CONFIG_B43LEGACY_DEBUG
|
|
struct b43legacy_dfsentry *dfsentry;
|
|
#endif
|
|
};
|
|
|
|
|
|
static inline
|
|
struct b43legacy_wl *hw_to_b43legacy_wl(struct ieee80211_hw *hw)
|
|
{
|
|
return hw->priv;
|
|
}
|
|
|
|
/* Helper function, which returns a boolean.
|
|
* TRUE, if PIO is used; FALSE, if DMA is used.
|
|
*/
|
|
#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
|
|
static inline
|
|
int b43legacy_using_pio(struct b43legacy_wldev *dev)
|
|
{
|
|
return dev->__using_pio;
|
|
}
|
|
#elif defined(CONFIG_B43LEGACY_DMA)
|
|
static inline
|
|
int b43legacy_using_pio(struct b43legacy_wldev *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#elif defined(CONFIG_B43LEGACY_PIO)
|
|
static inline
|
|
int b43legacy_using_pio(struct b43legacy_wldev *dev)
|
|
{
|
|
return 1;
|
|
}
|
|
#else
|
|
# error "Using neither DMA nor PIO? Confused..."
|
|
#endif
|
|
|
|
|
|
static inline
|
|
struct b43legacy_wldev *dev_to_b43legacy_wldev(struct device *dev)
|
|
{
|
|
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
|
|
return ssb_get_drvdata(ssb_dev);
|
|
}
|
|
|
|
/* Is the device operating in a specified mode (IEEE80211_IF_TYPE_XXX). */
|
|
static inline
|
|
int b43legacy_is_mode(struct b43legacy_wl *wl, int type)
|
|
{
|
|
return (wl->operating &&
|
|
wl->if_type == type);
|
|
}
|
|
|
|
static inline
|
|
bool is_bcm_board_vendor(struct b43legacy_wldev *dev)
|
|
{
|
|
return (dev->dev->bus->boardinfo.vendor == PCI_VENDOR_ID_BROADCOM);
|
|
}
|
|
|
|
static inline
|
|
u16 b43legacy_read16(struct b43legacy_wldev *dev, u16 offset)
|
|
{
|
|
return ssb_read16(dev->dev, offset);
|
|
}
|
|
|
|
static inline
|
|
void b43legacy_write16(struct b43legacy_wldev *dev, u16 offset, u16 value)
|
|
{
|
|
ssb_write16(dev->dev, offset, value);
|
|
}
|
|
|
|
static inline
|
|
u32 b43legacy_read32(struct b43legacy_wldev *dev, u16 offset)
|
|
{
|
|
return ssb_read32(dev->dev, offset);
|
|
}
|
|
|
|
static inline
|
|
void b43legacy_write32(struct b43legacy_wldev *dev, u16 offset, u32 value)
|
|
{
|
|
ssb_write32(dev->dev, offset, value);
|
|
}
|
|
|
|
static inline
|
|
struct b43legacy_lopair *b43legacy_get_lopair(struct b43legacy_phy *phy,
|
|
u16 radio_attenuation,
|
|
u16 baseband_attenuation)
|
|
{
|
|
return phy->_lo_pairs + (radio_attenuation
|
|
+ 14 * (baseband_attenuation / 2));
|
|
}
|
|
|
|
|
|
|
|
/* Message printing */
|
|
void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
|
|
__attribute__((format(printf, 2, 3)));
|
|
void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
|
|
__attribute__((format(printf, 2, 3)));
|
|
void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
|
|
__attribute__((format(printf, 2, 3)));
|
|
#if B43legacy_DEBUG
|
|
void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
|
|
__attribute__((format(printf, 2, 3)));
|
|
#else /* DEBUG */
|
|
# define b43legacydbg(wl, fmt...) do { /* nothing */ } while (0)
|
|
#endif /* DEBUG */
|
|
|
|
/* Macros for printing a value in Q5.2 format */
|
|
#define Q52_FMT "%u.%u"
|
|
#define Q52_ARG(q52) ((q52) / 4), (((q52) & 3) * 100 / 4)
|
|
|
|
#endif /* B43legacy_H_ */
|