forked from Minki/linux
8318d78a44
This patch creates new cfg80211 wiphy API for channel and bitrate registration and converts mac80211 and drivers to the new API. The old mac80211 API is completely ripped out. All drivers (except ath5k) are updated to the new API, in many cases I expect that optimisations can be done. Along with the regulatory code I've also ripped out the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be unnecessary if the hardware simply gives us whatever channels it wants to support and we then enable/disable them as required, which is pretty much required for travelling. Additionally, the patch adds proper "basic" rate handling for STA mode interface, AP mode interface will have to have new API added to allow userspace to set the basic rate set, currently it'll be empty... However, the basic rate handling will need to be moved to the BSS conf stuff. I do expect there to be bugs in this, especially wrt. transmit power handling where I'm basically clueless about how it should work. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
781 lines
27 KiB
C
781 lines
27 KiB
C
|
|
/*
|
|
* Radio tuning for RTL8225 on RTL8180
|
|
*
|
|
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
|
|
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
|
|
*
|
|
* Based on the r8180 driver, which is:
|
|
* Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
|
|
*
|
|
* Thanks to Realtek for their support!
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "rtl8180.h"
|
|
#include "rtl8180_rtl8225.h"
|
|
|
|
static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u16 reg80, reg84, reg82;
|
|
u32 bangdata;
|
|
int i;
|
|
|
|
bangdata = (data << 4) | (addr & 0xf);
|
|
|
|
reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
|
|
reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
|
|
|
|
reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7 | 0x400);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(10);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(10);
|
|
|
|
for (i = 15; i >= 0; i--) {
|
|
u16 reg = reg80 | !!(bangdata & (1 << i));
|
|
|
|
if (i & 1)
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
|
|
|
|
if (!(i & 1))
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(10);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x400);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
}
|
|
|
|
static u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u16 reg80, reg82, reg84, out;
|
|
int i;
|
|
|
|
reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
|
|
reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
|
|
reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect) | 0x400;
|
|
|
|
reg80 &= ~0xF;
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(4);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(5);
|
|
|
|
for (i = 4; i >= 0; i--) {
|
|
u16 reg = reg80 | ((addr >> i) & 1);
|
|
|
|
if (!(i & 1)) {
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(1);
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
|
|
if (i & 1) {
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x000E);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x040E);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3) | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
|
|
out = 0;
|
|
for (i = 11; i >= 0; i--) {
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(1);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3) | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3) | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3) | (1 << 1));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
|
|
if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
|
|
out |= 1 << i;
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
}
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
|
|
reg80 | (1 << 3) | (1 << 2));
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
udelay(2);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
|
|
|
|
return out;
|
|
}
|
|
|
|
static const u16 rtl8225bcd_rxgain[] = {
|
|
0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
|
|
0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
|
|
0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
|
|
0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
|
|
0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
|
|
0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
|
|
0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
|
|
0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
|
|
0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
|
|
0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
|
|
0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
|
|
0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
|
|
};
|
|
|
|
static const u8 rtl8225_agc[] = {
|
|
0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
|
|
0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
|
|
0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
|
|
0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
|
|
0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
|
|
0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
|
|
0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
|
|
0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
|
|
0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
|
|
0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
|
|
0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
|
|
0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
|
|
0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
|
|
};
|
|
|
|
static const u8 rtl8225_gain[] = {
|
|
0x23, 0x88, 0x7c, 0xa5, /* -82dbm */
|
|
0x23, 0x88, 0x7c, 0xb5, /* -82dbm */
|
|
0x23, 0x88, 0x7c, 0xc5, /* -82dbm */
|
|
0x33, 0x80, 0x79, 0xc5, /* -78dbm */
|
|
0x43, 0x78, 0x76, 0xc5, /* -74dbm */
|
|
0x53, 0x60, 0x73, 0xc5, /* -70dbm */
|
|
0x63, 0x58, 0x70, 0xc5, /* -66dbm */
|
|
};
|
|
|
|
static const u8 rtl8225_threshold[] = {
|
|
0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
|
|
};
|
|
|
|
static const u8 rtl8225_tx_gain_cck_ofdm[] = {
|
|
0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
|
|
};
|
|
|
|
static const u8 rtl8225_tx_power_cck[] = {
|
|
0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
|
|
0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
|
|
0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
|
|
0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
|
|
0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
|
|
0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
|
|
};
|
|
|
|
static const u8 rtl8225_tx_power_cck_ch14[] = {
|
|
0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
|
|
0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
|
|
0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
|
|
0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
|
|
0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
|
|
0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
static const u8 rtl8225_tx_power_ofdm[] = {
|
|
0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
|
|
};
|
|
|
|
static const u32 rtl8225_chan[] = {
|
|
0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
|
|
0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
|
|
};
|
|
|
|
static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u8 cck_power, ofdm_power;
|
|
const u8 *tmp;
|
|
u32 reg;
|
|
int i;
|
|
|
|
cck_power = priv->channels[channel - 1].hw_value & 0xFF;
|
|
ofdm_power = priv->channels[channel - 1].hw_value >> 8;
|
|
|
|
cck_power = min(cck_power, (u8)35);
|
|
ofdm_power = min(ofdm_power, (u8)35);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
|
|
rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
|
|
|
|
if (channel == 14)
|
|
tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
|
|
else
|
|
tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
|
|
|
|
for (i = 0; i < 8; i++)
|
|
rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
|
|
|
|
msleep(1); /* FIXME: optional? */
|
|
|
|
/* anaparam2 on */
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
|
|
rtl8225_tx_gain_cck_ofdm[ofdm_power/6] >> 1);
|
|
|
|
tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
|
|
|
|
rtl8225_write_phy_ofdm(dev, 5, *tmp);
|
|
rtl8225_write_phy_ofdm(dev, 7, *tmp);
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
static void rtl8225_rf_init(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
int i;
|
|
|
|
rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
|
|
|
|
/* host_pci_init */
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
msleep(200); /* FIXME: ehh?? */
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
|
|
|
|
/* TODO: check if we need really to change BRSR to do RF config */
|
|
rtl818x_ioread16(priv, &priv->map->BRSR);
|
|
rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
|
|
rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl8225_write(dev, 0x0, 0x067);
|
|
rtl8225_write(dev, 0x1, 0xFE0);
|
|
rtl8225_write(dev, 0x2, 0x44D);
|
|
rtl8225_write(dev, 0x3, 0x441);
|
|
rtl8225_write(dev, 0x4, 0x8BE);
|
|
rtl8225_write(dev, 0x5, 0xBF0); /* TODO: minipci */
|
|
rtl8225_write(dev, 0x6, 0xAE6);
|
|
rtl8225_write(dev, 0x7, rtl8225_chan[0]);
|
|
rtl8225_write(dev, 0x8, 0x01F);
|
|
rtl8225_write(dev, 0x9, 0x334);
|
|
rtl8225_write(dev, 0xA, 0xFD4);
|
|
rtl8225_write(dev, 0xB, 0x391);
|
|
rtl8225_write(dev, 0xC, 0x050);
|
|
rtl8225_write(dev, 0xD, 0x6DB);
|
|
rtl8225_write(dev, 0xE, 0x029);
|
|
rtl8225_write(dev, 0xF, 0x914); msleep(1);
|
|
|
|
rtl8225_write(dev, 0x2, 0xC4D); msleep(100);
|
|
|
|
rtl8225_write(dev, 0x0, 0x127);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
|
|
rtl8225_write(dev, 0x1, i + 1);
|
|
rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
|
|
}
|
|
|
|
rtl8225_write(dev, 0x0, 0x027);
|
|
rtl8225_write(dev, 0x0, 0x22F);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
|
|
rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
|
|
msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
|
|
msleep(1);
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x06, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x08, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x11, 0x03); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
|
|
|
|
rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x13, 0xd0);
|
|
rtl8225_write_phy_cck(dev, 0x19, 0x00);
|
|
rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
|
|
rtl8225_write_phy_cck(dev, 0x1b, 0x08);
|
|
rtl8225_write_phy_cck(dev, 0x40, 0x86);
|
|
rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D); msleep(1);
|
|
|
|
rtl8225_rf_set_tx_power(dev, 1);
|
|
|
|
/* RX antenna default to A */
|
|
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
|
|
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
|
|
msleep(1);
|
|
rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
|
|
rtl8225_write(dev, 0x0c, 0x50);
|
|
/* set OFDM initial gain */
|
|
rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[4 * 4]);
|
|
rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[4 * 4 + 1]);
|
|
rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[4 * 4 + 2]);
|
|
rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[4 * 4 + 3]);
|
|
/* set CCK threshold */
|
|
rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[0]);
|
|
}
|
|
|
|
static const u8 rtl8225z2_tx_power_cck_ch14[] = {
|
|
0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
static const u8 rtl8225z2_tx_power_cck_B[] = {
|
|
0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x04
|
|
};
|
|
|
|
static const u8 rtl8225z2_tx_power_cck_A[] = {
|
|
0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04
|
|
};
|
|
|
|
static const u8 rtl8225z2_tx_power_cck[] = {
|
|
0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
|
|
};
|
|
|
|
static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u8 cck_power, ofdm_power;
|
|
const u8 *tmp;
|
|
int i;
|
|
|
|
cck_power = priv->channels[channel - 1].hw_value & 0xFF;
|
|
ofdm_power = priv->channels[channel - 1].hw_value >> 8;
|
|
|
|
if (channel == 14)
|
|
tmp = rtl8225z2_tx_power_cck_ch14;
|
|
else if (cck_power == 12)
|
|
tmp = rtl8225z2_tx_power_cck_B;
|
|
else if (cck_power == 13)
|
|
tmp = rtl8225z2_tx_power_cck_A;
|
|
else
|
|
tmp = rtl8225z2_tx_power_cck;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
|
|
|
|
cck_power = min(cck_power, (u8)35);
|
|
if (cck_power == 13 || cck_power == 14)
|
|
cck_power = 12;
|
|
if (cck_power >= 15)
|
|
cck_power -= 2;
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, cck_power);
|
|
rtl818x_ioread8(priv, &priv->map->TX_GAIN_CCK);
|
|
msleep(1);
|
|
|
|
ofdm_power = min(ofdm_power, (u8)35);
|
|
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, ofdm_power);
|
|
|
|
rtl8225_write_phy_ofdm(dev, 2, 0x62);
|
|
rtl8225_write_phy_ofdm(dev, 5, 0x00);
|
|
rtl8225_write_phy_ofdm(dev, 6, 0x40);
|
|
rtl8225_write_phy_ofdm(dev, 7, 0x00);
|
|
rtl8225_write_phy_ofdm(dev, 8, 0x40);
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
static const u16 rtl8225z2_rxgain[] = {
|
|
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0008, 0x0009,
|
|
0x000a, 0x000b, 0x0102, 0x0103, 0x0104, 0x0105, 0x0140, 0x0141,
|
|
0x0142, 0x0143, 0x0144, 0x0145, 0x0180, 0x0181, 0x0182, 0x0183,
|
|
0x0184, 0x0185, 0x0188, 0x0189, 0x018a, 0x018b, 0x0243, 0x0244,
|
|
0x0245, 0x0280, 0x0281, 0x0282, 0x0283, 0x0284, 0x0285, 0x0288,
|
|
0x0289, 0x028a, 0x028b, 0x028c, 0x0342, 0x0343, 0x0344, 0x0345,
|
|
0x0380, 0x0381, 0x0382, 0x0383, 0x0384, 0x0385, 0x0388, 0x0389,
|
|
0x038a, 0x038b, 0x038c, 0x038d, 0x0390, 0x0391, 0x0392, 0x0393,
|
|
0x0394, 0x0395, 0x0398, 0x0399, 0x039a, 0x039b, 0x039c, 0x039d,
|
|
0x03a0, 0x03a1, 0x03a2, 0x03a3, 0x03a4, 0x03a5, 0x03a8, 0x03a9,
|
|
0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
|
|
0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
|
|
};
|
|
|
|
static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
int i;
|
|
|
|
rtl8180_set_anaparam(priv, RTL8225_ANAPARAM_ON);
|
|
|
|
/* host_pci_init */
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
msleep(200); /* FIXME: ehh?? */
|
|
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0xFF & ~(1 << 6));
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00088008);
|
|
|
|
/* TODO: check if we need really to change BRSR to do RF config */
|
|
rtl818x_ioread16(priv, &priv->map->BRSR);
|
|
rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
|
|
rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
|
|
rtl8225_write(dev, 0x0, 0x0B7); msleep(1);
|
|
rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
|
|
rtl8225_write(dev, 0x2, 0x44D); msleep(1);
|
|
rtl8225_write(dev, 0x3, 0x441); msleep(1);
|
|
rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
|
|
rtl8225_write(dev, 0x5, 0xC72); msleep(1);
|
|
rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
|
|
rtl8225_write(dev, 0x7, 0x82A); msleep(1);
|
|
rtl8225_write(dev, 0x8, 0x03F); msleep(1);
|
|
rtl8225_write(dev, 0x9, 0x335); msleep(1);
|
|
rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
|
|
rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
|
|
rtl8225_write(dev, 0xc, 0x850); msleep(1);
|
|
rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
|
|
rtl8225_write(dev, 0xe, 0x02B); msleep(1);
|
|
rtl8225_write(dev, 0xf, 0x114); msleep(100);
|
|
|
|
if (!(rtl8225_read(dev, 6) & (1 << 7))) {
|
|
rtl8225_write(dev, 0x02, 0x0C4D);
|
|
msleep(200);
|
|
rtl8225_write(dev, 0x02, 0x044D);
|
|
msleep(100);
|
|
/* TODO: readd calibration failure message when the calibration
|
|
check works */
|
|
}
|
|
|
|
rtl8225_write(dev, 0x0, 0x1B7);
|
|
rtl8225_write(dev, 0x3, 0x002);
|
|
rtl8225_write(dev, 0x5, 0x004);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
|
|
rtl8225_write(dev, 0x1, i + 1);
|
|
rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
|
|
}
|
|
|
|
rtl8225_write(dev, 0x0, 0x0B7); msleep(100);
|
|
rtl8225_write(dev, 0x2, 0xC4D);
|
|
|
|
msleep(200);
|
|
rtl8225_write(dev, 0x2, 0x44D);
|
|
msleep(100);
|
|
|
|
rtl8225_write(dev, 0x00, 0x2BF);
|
|
rtl8225_write(dev, 0xFF, 0xFFFF);
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
|
|
rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
|
|
msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
|
|
msleep(1);
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x02, 0x62); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
|
|
rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1b, 0x11); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1e, 0xb3); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); /* FIXME: not needed? */
|
|
rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
|
|
rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
|
|
|
|
rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x10, 0x93); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x13, 0xd0);
|
|
rtl8225_write_phy_cck(dev, 0x19, 0x00);
|
|
rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
|
|
rtl8225_write_phy_cck(dev, 0x1b, 0x08);
|
|
rtl8225_write_phy_cck(dev, 0x40, 0x86);
|
|
rtl8225_write_phy_cck(dev, 0x41, 0x8a); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
|
|
rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
|
|
|
|
rtl818x_iowrite8(priv, (u8 __iomem *)((void __iomem *)priv->map + 0x5B), 0x0D); msleep(1);
|
|
|
|
rtl8225z2_rf_set_tx_power(dev, 1);
|
|
|
|
/* RX antenna default to A */
|
|
rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
|
|
rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
|
|
msleep(1);
|
|
rtl818x_iowrite32(priv, (__le32 __iomem *)((void __iomem *)priv->map + 0x94), 0x15c00002);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
}
|
|
|
|
static void rtl8225_rf_stop(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u8 reg;
|
|
|
|
rtl8225_write(dev, 0x4, 0x1f); msleep(1);
|
|
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
|
|
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
|
|
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
|
|
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
|
|
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
|
|
}
|
|
|
|
static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
int chan = ieee80211_frequency_to_channel(conf->channel->center_freq);
|
|
|
|
if (priv->rf->init == rtl8225_rf_init)
|
|
rtl8225_rf_set_tx_power(dev, chan);
|
|
else
|
|
rtl8225z2_rf_set_tx_power(dev, chan);
|
|
|
|
rtl8225_write(dev, 0x7, rtl8225_chan[chan - 1]);
|
|
msleep(10);
|
|
|
|
if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
|
|
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
|
|
rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
|
|
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
|
|
rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
|
|
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
|
|
} else {
|
|
rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
|
|
rtl818x_iowrite8(priv, &priv->map->SIFS, 0x44);
|
|
rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
|
|
rtl818x_iowrite8(priv, &priv->map->EIFS, 81);
|
|
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
|
|
}
|
|
}
|
|
|
|
static const struct rtl818x_rf_ops rtl8225_ops = {
|
|
.name = "rtl8225",
|
|
.init = rtl8225_rf_init,
|
|
.stop = rtl8225_rf_stop,
|
|
.set_chan = rtl8225_rf_set_channel
|
|
};
|
|
|
|
static const struct rtl818x_rf_ops rtl8225z2_ops = {
|
|
.name = "rtl8225z2",
|
|
.init = rtl8225z2_rf_init,
|
|
.stop = rtl8225_rf_stop,
|
|
.set_chan = rtl8225_rf_set_channel
|
|
};
|
|
|
|
const struct rtl818x_rf_ops * rtl8180_detect_rf(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u16 reg8, reg9;
|
|
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x0488);
|
|
rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
|
|
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
|
|
msleep(100);
|
|
|
|
rtl8225_write(dev, 0, 0x1B7);
|
|
|
|
reg8 = rtl8225_read(dev, 8);
|
|
reg9 = rtl8225_read(dev, 9);
|
|
|
|
rtl8225_write(dev, 0, 0x0B7);
|
|
|
|
if (reg8 != 0x588 || reg9 != 0x700)
|
|
return &rtl8225_ops;
|
|
|
|
return &rtl8225z2_ops;
|
|
}
|