forked from Minki/linux
2670 lines
87 KiB
C
2670 lines
87 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Nuvoton NAU8825 audio codec driver
|
|
*
|
|
* Copyright 2015 Google Chromium project.
|
|
* Author: Anatol Pomozov <anatol@chromium.org>
|
|
* Copyright 2015 Nuvoton Technology Corp.
|
|
* Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/semaphore.h>
|
|
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/jack.h>
|
|
|
|
|
|
#include "nau8825.h"
|
|
|
|
|
|
#define NUVOTON_CODEC_DAI "nau8825-hifi"
|
|
|
|
#define NAU_FREF_MAX 13500000
|
|
#define NAU_FVCO_MAX 124000000
|
|
#define NAU_FVCO_MIN 90000000
|
|
|
|
/* cross talk suppression detection */
|
|
#define LOG10_MAGIC 646456993
|
|
#define GAIN_AUGMENT 22500
|
|
#define SIDETONE_BASE 207000
|
|
|
|
/* the maximum frequency of CLK_ADC and CLK_DAC */
|
|
#define CLK_DA_AD_MAX 6144000
|
|
|
|
static int nau8825_configure_sysclk(struct nau8825 *nau8825,
|
|
int clk_id, unsigned int freq);
|
|
|
|
struct nau8825_fll {
|
|
int mclk_src;
|
|
int ratio;
|
|
int fll_frac;
|
|
int fll_int;
|
|
int clk_ref_div;
|
|
};
|
|
|
|
struct nau8825_fll_attr {
|
|
unsigned int param;
|
|
unsigned int val;
|
|
};
|
|
|
|
/* scaling for mclk from sysclk_src output */
|
|
static const struct nau8825_fll_attr mclk_src_scaling[] = {
|
|
{ 1, 0x0 },
|
|
{ 2, 0x2 },
|
|
{ 4, 0x3 },
|
|
{ 8, 0x4 },
|
|
{ 16, 0x5 },
|
|
{ 32, 0x6 },
|
|
{ 3, 0x7 },
|
|
{ 6, 0xa },
|
|
{ 12, 0xb },
|
|
{ 24, 0xc },
|
|
{ 48, 0xd },
|
|
{ 96, 0xe },
|
|
{ 5, 0xf },
|
|
};
|
|
|
|
/* ratio for input clk freq */
|
|
static const struct nau8825_fll_attr fll_ratio[] = {
|
|
{ 512000, 0x01 },
|
|
{ 256000, 0x02 },
|
|
{ 128000, 0x04 },
|
|
{ 64000, 0x08 },
|
|
{ 32000, 0x10 },
|
|
{ 8000, 0x20 },
|
|
{ 4000, 0x40 },
|
|
};
|
|
|
|
static const struct nau8825_fll_attr fll_pre_scalar[] = {
|
|
{ 1, 0x0 },
|
|
{ 2, 0x1 },
|
|
{ 4, 0x2 },
|
|
{ 8, 0x3 },
|
|
};
|
|
|
|
/* over sampling rate */
|
|
struct nau8825_osr_attr {
|
|
unsigned int osr;
|
|
unsigned int clk_src;
|
|
};
|
|
|
|
static const struct nau8825_osr_attr osr_dac_sel[] = {
|
|
{ 64, 2 }, /* OSR 64, SRC 1/4 */
|
|
{ 256, 0 }, /* OSR 256, SRC 1 */
|
|
{ 128, 1 }, /* OSR 128, SRC 1/2 */
|
|
{ 0, 0 },
|
|
{ 32, 3 }, /* OSR 32, SRC 1/8 */
|
|
};
|
|
|
|
static const struct nau8825_osr_attr osr_adc_sel[] = {
|
|
{ 32, 3 }, /* OSR 32, SRC 1/8 */
|
|
{ 64, 2 }, /* OSR 64, SRC 1/4 */
|
|
{ 128, 1 }, /* OSR 128, SRC 1/2 */
|
|
{ 256, 0 }, /* OSR 256, SRC 1 */
|
|
};
|
|
|
|
static const struct reg_default nau8825_reg_defaults[] = {
|
|
{ NAU8825_REG_ENA_CTRL, 0x00ff },
|
|
{ NAU8825_REG_IIC_ADDR_SET, 0x0 },
|
|
{ NAU8825_REG_CLK_DIVIDER, 0x0050 },
|
|
{ NAU8825_REG_FLL1, 0x0 },
|
|
{ NAU8825_REG_FLL2, 0x3126 },
|
|
{ NAU8825_REG_FLL3, 0x0008 },
|
|
{ NAU8825_REG_FLL4, 0x0010 },
|
|
{ NAU8825_REG_FLL5, 0x0 },
|
|
{ NAU8825_REG_FLL6, 0x6000 },
|
|
{ NAU8825_REG_FLL_VCO_RSV, 0xf13c },
|
|
{ NAU8825_REG_HSD_CTRL, 0x000c },
|
|
{ NAU8825_REG_JACK_DET_CTRL, 0x0 },
|
|
{ NAU8825_REG_INTERRUPT_MASK, 0x0 },
|
|
{ NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff },
|
|
{ NAU8825_REG_SAR_CTRL, 0x0015 },
|
|
{ NAU8825_REG_KEYDET_CTRL, 0x0110 },
|
|
{ NAU8825_REG_VDET_THRESHOLD_1, 0x0 },
|
|
{ NAU8825_REG_VDET_THRESHOLD_2, 0x0 },
|
|
{ NAU8825_REG_VDET_THRESHOLD_3, 0x0 },
|
|
{ NAU8825_REG_VDET_THRESHOLD_4, 0x0 },
|
|
{ NAU8825_REG_GPIO34_CTRL, 0x0 },
|
|
{ NAU8825_REG_GPIO12_CTRL, 0x0 },
|
|
{ NAU8825_REG_TDM_CTRL, 0x0 },
|
|
{ NAU8825_REG_I2S_PCM_CTRL1, 0x000b },
|
|
{ NAU8825_REG_I2S_PCM_CTRL2, 0x8010 },
|
|
{ NAU8825_REG_LEFT_TIME_SLOT, 0x0 },
|
|
{ NAU8825_REG_RIGHT_TIME_SLOT, 0x0 },
|
|
{ NAU8825_REG_BIQ_CTRL, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF1, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF2, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF3, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF4, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF5, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF6, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF7, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF8, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF9, 0x0 },
|
|
{ NAU8825_REG_BIQ_COF10, 0x0 },
|
|
{ NAU8825_REG_ADC_RATE, 0x0010 },
|
|
{ NAU8825_REG_DAC_CTRL1, 0x0001 },
|
|
{ NAU8825_REG_DAC_CTRL2, 0x0 },
|
|
{ NAU8825_REG_DAC_DGAIN_CTRL, 0x0 },
|
|
{ NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
|
|
{ NAU8825_REG_MUTE_CTRL, 0x0 },
|
|
{ NAU8825_REG_HSVOL_CTRL, 0x0 },
|
|
{ NAU8825_REG_DACL_CTRL, 0x02cf },
|
|
{ NAU8825_REG_DACR_CTRL, 0x00cf },
|
|
{ NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 },
|
|
{ NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 },
|
|
{ NAU8825_REG_ADC_DRC_SLOPES, 0x25ff },
|
|
{ NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 },
|
|
{ NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 },
|
|
{ NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 },
|
|
{ NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 },
|
|
{ NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 },
|
|
{ NAU8825_REG_IMM_MODE_CTRL, 0x0 },
|
|
{ NAU8825_REG_CLASSG_CTRL, 0x0 },
|
|
{ NAU8825_REG_OPT_EFUSE_CTRL, 0x0 },
|
|
{ NAU8825_REG_MISC_CTRL, 0x0 },
|
|
{ NAU8825_REG_BIAS_ADJ, 0x0 },
|
|
{ NAU8825_REG_TRIM_SETTINGS, 0x0 },
|
|
{ NAU8825_REG_ANALOG_CONTROL_1, 0x0 },
|
|
{ NAU8825_REG_ANALOG_CONTROL_2, 0x0 },
|
|
{ NAU8825_REG_ANALOG_ADC_1, 0x0011 },
|
|
{ NAU8825_REG_ANALOG_ADC_2, 0x0020 },
|
|
{ NAU8825_REG_RDAC, 0x0008 },
|
|
{ NAU8825_REG_MIC_BIAS, 0x0006 },
|
|
{ NAU8825_REG_BOOST, 0x0 },
|
|
{ NAU8825_REG_FEPGA, 0x0 },
|
|
{ NAU8825_REG_POWER_UP_CONTROL, 0x0 },
|
|
{ NAU8825_REG_CHARGE_PUMP, 0x0 },
|
|
};
|
|
|
|
/* register backup table when cross talk detection */
|
|
static struct reg_default nau8825_xtalk_baktab[] = {
|
|
{ NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
|
|
{ NAU8825_REG_HSVOL_CTRL, 0 },
|
|
{ NAU8825_REG_DACL_CTRL, 0x00cf },
|
|
{ NAU8825_REG_DACR_CTRL, 0x02cf },
|
|
};
|
|
|
|
static const unsigned short logtable[256] = {
|
|
0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7,
|
|
0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508,
|
|
0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6,
|
|
0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37,
|
|
0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f,
|
|
0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41,
|
|
0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1,
|
|
0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142,
|
|
0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68,
|
|
0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355,
|
|
0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c,
|
|
0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490,
|
|
0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3,
|
|
0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507,
|
|
0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe,
|
|
0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca,
|
|
0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c,
|
|
0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7,
|
|
0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c,
|
|
0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c,
|
|
0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a,
|
|
0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065,
|
|
0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730,
|
|
0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc,
|
|
0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469,
|
|
0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9,
|
|
0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c,
|
|
0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765,
|
|
0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83,
|
|
0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387,
|
|
0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973,
|
|
0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47
|
|
};
|
|
|
|
/**
|
|
* nau8825_sema_acquire - acquire the semaphore of nau88l25
|
|
* @nau8825: component to register the codec private data with
|
|
* @timeout: how long in jiffies to wait before failure or zero to wait
|
|
* until release
|
|
*
|
|
* Attempts to acquire the semaphore with number of jiffies. If no more
|
|
* tasks are allowed to acquire the semaphore, calling this function will
|
|
* put the task to sleep. If the semaphore is not released within the
|
|
* specified number of jiffies, this function returns.
|
|
* If the semaphore is not released within the specified number of jiffies,
|
|
* this function returns -ETIME. If the sleep is interrupted by a signal,
|
|
* this function will return -EINTR. It returns 0 if the semaphore was
|
|
* acquired successfully.
|
|
*
|
|
* Acquires the semaphore without jiffies. Try to acquire the semaphore
|
|
* atomically. Returns 0 if the semaphore has been acquired successfully
|
|
* or 1 if it it cannot be acquired.
|
|
*/
|
|
static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
|
|
{
|
|
int ret;
|
|
|
|
if (timeout) {
|
|
ret = down_timeout(&nau8825->xtalk_sem, timeout);
|
|
if (ret < 0)
|
|
dev_warn(nau8825->dev, "Acquire semaphore timeout\n");
|
|
} else {
|
|
ret = down_trylock(&nau8825->xtalk_sem);
|
|
if (ret)
|
|
dev_warn(nau8825->dev, "Acquire semaphore fail\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* nau8825_sema_release - release the semaphore of nau88l25
|
|
* @nau8825: component to register the codec private data with
|
|
*
|
|
* Release the semaphore which may be called from any context and
|
|
* even by tasks which have never called down().
|
|
*/
|
|
static inline void nau8825_sema_release(struct nau8825 *nau8825)
|
|
{
|
|
up(&nau8825->xtalk_sem);
|
|
}
|
|
|
|
/**
|
|
* nau8825_sema_reset - reset the semaphore for nau88l25
|
|
* @nau8825: component to register the codec private data with
|
|
*
|
|
* Reset the counter of the semaphore. Call this function to restart
|
|
* a new round task management.
|
|
*/
|
|
static inline void nau8825_sema_reset(struct nau8825 *nau8825)
|
|
{
|
|
nau8825->xtalk_sem.count = 1;
|
|
}
|
|
|
|
/**
|
|
* Ramp up the headphone volume change gradually to target level.
|
|
*
|
|
* @nau8825: component to register the codec private data with
|
|
* @vol_from: the volume to start up
|
|
* @vol_to: the target volume
|
|
* @step: the volume span to move on
|
|
*
|
|
* The headphone volume is from 0dB to minimum -54dB and -1dB per step.
|
|
* If the volume changes sharp, there is a pop noise heard in headphone. We
|
|
* provide the function to ramp up the volume up or down by delaying 10ms
|
|
* per step.
|
|
*/
|
|
static void nau8825_hpvol_ramp(struct nau8825 *nau8825,
|
|
unsigned int vol_from, unsigned int vol_to, unsigned int step)
|
|
{
|
|
unsigned int value, volume, ramp_up, from, to;
|
|
|
|
if (vol_from == vol_to || step == 0) {
|
|
return;
|
|
} else if (vol_from < vol_to) {
|
|
ramp_up = true;
|
|
from = vol_from;
|
|
to = vol_to;
|
|
} else {
|
|
ramp_up = false;
|
|
from = vol_to;
|
|
to = vol_from;
|
|
}
|
|
/* only handle volume from 0dB to minimum -54dB */
|
|
if (to > NAU8825_HP_VOL_MIN)
|
|
to = NAU8825_HP_VOL_MIN;
|
|
|
|
for (volume = from; volume < to; volume += step) {
|
|
if (ramp_up)
|
|
value = volume;
|
|
else
|
|
value = to - volume + from;
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
|
|
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
|
|
(value << NAU8825_HPL_VOL_SFT) | value);
|
|
usleep_range(10000, 10500);
|
|
}
|
|
if (ramp_up)
|
|
value = to;
|
|
else
|
|
value = from;
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
|
|
NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
|
|
(value << NAU8825_HPL_VOL_SFT) | value);
|
|
}
|
|
|
|
/**
|
|
* Computes log10 of a value; the result is round off to 3 decimal. This func-
|
|
* tion takes reference to dvb-math. The source code locates as the following.
|
|
* Linux/drivers/media/dvb-core/dvb_math.c
|
|
* @value: input for log10
|
|
*
|
|
* return log10(value) * 1000
|
|
*/
|
|
static u32 nau8825_intlog10_dec3(u32 value)
|
|
{
|
|
u32 msb, logentry, significand, interpolation, log10val;
|
|
u64 log2val;
|
|
|
|
/* first detect the msb (count begins at 0) */
|
|
msb = fls(value) - 1;
|
|
/**
|
|
* now we use a logtable after the following method:
|
|
*
|
|
* log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24
|
|
* where x = msb and therefore 1 <= y < 2
|
|
* first y is determined by shifting the value left
|
|
* so that msb is bit 31
|
|
* 0x00231f56 -> 0x8C7D5800
|
|
* the result is y * 2^31 -> "significand"
|
|
* then the highest 9 bits are used for a table lookup
|
|
* the highest bit is discarded because it's always set
|
|
* the highest nine bits in our example are 100011000
|
|
* so we would use the entry 0x18
|
|
*/
|
|
significand = value << (31 - msb);
|
|
logentry = (significand >> 23) & 0xff;
|
|
/**
|
|
* last step we do is interpolation because of the
|
|
* limitations of the log table the error is that part of
|
|
* the significand which isn't used for lookup then we
|
|
* compute the ratio between the error and the next table entry
|
|
* and interpolate it between the log table entry used and the
|
|
* next one the biggest error possible is 0x7fffff
|
|
* (in our example it's 0x7D5800)
|
|
* needed value for next table entry is 0x800000
|
|
* so the interpolation is
|
|
* (error / 0x800000) * (logtable_next - logtable_current)
|
|
* in the implementation the division is moved to the end for
|
|
* better accuracy there is also an overflow correction if
|
|
* logtable_next is 256
|
|
*/
|
|
interpolation = ((significand & 0x7fffff) *
|
|
((logtable[(logentry + 1) & 0xff] -
|
|
logtable[logentry]) & 0xffff)) >> 15;
|
|
|
|
log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation);
|
|
/**
|
|
* log10(x) = log2(x) * log10(2)
|
|
*/
|
|
log10val = (log2val * LOG10_MAGIC) >> 31;
|
|
/**
|
|
* the result is round off to 3 decimal
|
|
*/
|
|
return log10val / ((1 << 24) / 1000);
|
|
}
|
|
|
|
/**
|
|
* computes cross talk suppression sidetone gain.
|
|
*
|
|
* @sig_org: orignal signal level
|
|
* @sig_cros: cross talk signal level
|
|
*
|
|
* The orignal and cross talk signal vlues need to be characterized.
|
|
* Once these values have been characterized, this sidetone value
|
|
* can be converted to decibel with the equation below.
|
|
* sidetone = 20 * log (original signal level / crosstalk signal level)
|
|
*
|
|
* return cross talk sidetone gain
|
|
*/
|
|
static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros)
|
|
{
|
|
u32 gain, sidetone;
|
|
|
|
if (WARN_ON(sig_org == 0 || sig_cros == 0))
|
|
return 0;
|
|
|
|
sig_org = nau8825_intlog10_dec3(sig_org);
|
|
sig_cros = nau8825_intlog10_dec3(sig_cros);
|
|
if (sig_org >= sig_cros)
|
|
gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT;
|
|
else
|
|
gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT;
|
|
sidetone = SIDETONE_BASE - gain * 2;
|
|
sidetone /= 1000;
|
|
|
|
return sidetone;
|
|
}
|
|
|
|
static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg)
|
|
{
|
|
int index;
|
|
|
|
for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++)
|
|
if (nau8825_xtalk_baktab[index].reg == reg)
|
|
return index;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void nau8825_xtalk_backup(struct nau8825 *nau8825)
|
|
{
|
|
int i;
|
|
|
|
if (nau8825->xtalk_baktab_initialized)
|
|
return;
|
|
|
|
/* Backup some register values to backup table */
|
|
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++)
|
|
regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
|
|
&nau8825_xtalk_baktab[i].def);
|
|
|
|
nau8825->xtalk_baktab_initialized = true;
|
|
}
|
|
|
|
static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel)
|
|
{
|
|
int i, volume;
|
|
|
|
if (!nau8825->xtalk_baktab_initialized)
|
|
return;
|
|
|
|
/* Restore register values from backup table; When the driver restores
|
|
* the headphone volume in XTALK_DONE state, it needs recover to
|
|
* original level gradually with 3dB per step for less pop noise.
|
|
* Otherwise, the restore should do ASAP.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) {
|
|
if (!cause_cancel && nau8825_xtalk_baktab[i].reg ==
|
|
NAU8825_REG_HSVOL_CTRL) {
|
|
/* Ramping up the volume change to reduce pop noise */
|
|
volume = nau8825_xtalk_baktab[i].def &
|
|
NAU8825_HPR_VOL_MASK;
|
|
nau8825_hpvol_ramp(nau8825, 0, volume, 3);
|
|
continue;
|
|
}
|
|
regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
|
|
nau8825_xtalk_baktab[i].def);
|
|
}
|
|
|
|
nau8825->xtalk_baktab_initialized = false;
|
|
}
|
|
|
|
static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825)
|
|
{
|
|
/* Enable power of DAC path */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
|
|
NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK |
|
|
NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR |
|
|
NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC |
|
|
NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK);
|
|
/* Prevent startup click by letting charge pump to ramp up and
|
|
* change bump enable
|
|
*/
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN,
|
|
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN);
|
|
/* Enable clock sync of DAC and DAC clock */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
|
|
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN |
|
|
NAU8825_RDAC_FS_BCLK_ENB,
|
|
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN);
|
|
/* Power up output driver with 2 stage */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
|
|
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
|
|
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L,
|
|
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
|
|
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
|
|
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L,
|
|
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L);
|
|
/* HP outputs not shouted to ground */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
|
|
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0);
|
|
/* Enable HP boost driver */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
|
|
NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS);
|
|
/* Enable class G compare path to supply 1.8V or 0.9V. */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL,
|
|
NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN,
|
|
NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN);
|
|
}
|
|
|
|
static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825)
|
|
{
|
|
/* Power up left ADC and raise 5dB than Vmid for Vref */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
|
|
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK,
|
|
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB);
|
|
}
|
|
|
|
static void nau8825_xtalk_clock(struct nau8825 *nau8825)
|
|
{
|
|
/* Recover FLL default value */
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000);
|
|
/* Enable internal VCO clock for detection signal generated */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN,
|
|
NAU8825_DCO_EN);
|
|
/* Given specific clock frequency of internal clock to
|
|
* generate signal.
|
|
*/
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_MCLK_SRC_MASK, 0xf);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
|
|
NAU8825_FLL_RATIO_MASK, 0x10);
|
|
}
|
|
|
|
static void nau8825_xtalk_prepare(struct nau8825 *nau8825)
|
|
{
|
|
int volume, index;
|
|
|
|
/* Backup those registers changed by cross talk detection */
|
|
nau8825_xtalk_backup(nau8825);
|
|
/* Config IIS as master to output signal by codec */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
|
|
NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER |
|
|
(0x2 << NAU8825_I2S_LRC_DIV_SFT) | 0x1);
|
|
/* Ramp up headphone volume to 0dB to get better performance and
|
|
* avoid pop noise in headphone.
|
|
*/
|
|
index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL);
|
|
if (index != -EINVAL) {
|
|
volume = nau8825_xtalk_baktab[index].def &
|
|
NAU8825_HPR_VOL_MASK;
|
|
nau8825_hpvol_ramp(nau8825, volume, 0, 3);
|
|
}
|
|
nau8825_xtalk_clock(nau8825);
|
|
nau8825_xtalk_prepare_dac(nau8825);
|
|
nau8825_xtalk_prepare_adc(nau8825);
|
|
/* Config channel path and digital gain */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
|
|
NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK,
|
|
NAU8825_DACL_CH_SEL_L | 0xab);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
|
|
NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK,
|
|
NAU8825_DACR_CH_SEL_R | 0xab);
|
|
/* Config cross talk parameters and generate the 23Hz sine wave with
|
|
* 1/16 full scale of signal level for impedance measurement.
|
|
*/
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
|
|
NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK |
|
|
NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK,
|
|
(0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th |
|
|
NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN);
|
|
/* RMS intrruption enable */
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0);
|
|
/* Power up left and right DAC */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
|
|
}
|
|
|
|
static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825)
|
|
{
|
|
/* Disable HP boost driver */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
|
|
NAU8825_HP_BOOST_DIS, 0);
|
|
/* HP outputs shouted to ground */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
|
|
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
|
|
NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
|
|
/* Power down left and right DAC */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
|
|
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
|
|
/* Enable the TESTDAC and disable L/R HP impedance */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP |
|
|
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
|
|
/* Power down output driver with 2 stage */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
|
|
NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
|
|
NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
|
|
NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0);
|
|
/* Disable clock sync of DAC and DAC clock */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
|
|
NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0);
|
|
/* Disable charge pump ramp up function and change bump */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0);
|
|
/* Disable power of DAC path */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
|
|
NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0);
|
|
if (!nau8825->irq)
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
|
|
}
|
|
|
|
static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825)
|
|
{
|
|
/* Power down left ADC and restore voltage to Vmid */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
|
|
NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0);
|
|
}
|
|
|
|
static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel)
|
|
{
|
|
/* Enable internal VCO needed for interruptions */
|
|
nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
|
|
nau8825_xtalk_clean_dac(nau8825);
|
|
nau8825_xtalk_clean_adc(nau8825);
|
|
/* Clear cross talk parameters and disable */
|
|
regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0);
|
|
/* RMS intrruption disable */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN);
|
|
/* Recover default value for IIS */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
|
|
NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE);
|
|
/* Restore value of specific register for cross talk */
|
|
nau8825_xtalk_restore(nau8825, cause_cancel);
|
|
}
|
|
|
|
static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol)
|
|
{
|
|
/* Apply ADC volume for better cross talk performance */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL,
|
|
NAU8825_ADC_DIG_VOL_MASK, vol);
|
|
/* Disables JKTIP(HPL) DAC channel for right to left measurement.
|
|
* Do it before sending signal in order to erase pop noise.
|
|
*/
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN,
|
|
NAU8825_BIAS_TESTDACL_EN);
|
|
switch (nau8825->xtalk_state) {
|
|
case NAU8825_XTALK_HPR_R2L:
|
|
/* Enable right headphone impedance */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
|
|
NAU8825_BIAS_HPR_IMP);
|
|
break;
|
|
case NAU8825_XTALK_HPL_R2L:
|
|
/* Enable left headphone impedance */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
|
|
NAU8825_BIAS_HPL_IMP);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
msleep(100);
|
|
/* Impedance measurement mode enable */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
|
|
NAU8825_IMM_EN, NAU8825_IMM_EN);
|
|
}
|
|
|
|
static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825)
|
|
{
|
|
/* Impedance measurement mode disable */
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0);
|
|
}
|
|
|
|
/* The cross talk measurement function can reduce cross talk across the
|
|
* JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal
|
|
* level to determine what cross talk reduction gain is. This system works by
|
|
* sending a 23Hz -24dBV sine wave into the headset output DAC and through
|
|
* the PGA. The output of the PGA is then connected to an internal current
|
|
* sense which measures the attenuated 23Hz signal and passing the output to
|
|
* an ADC which converts the measurement to a binary code. With two separated
|
|
* measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data
|
|
* can be separated read in IMM_RMS_L for HSR and HSL after each measurement.
|
|
* Thus, the measurement function has four states to complete whole sequence.
|
|
* 1. Prepare state : Prepare the resource for detection and transfer to HPR
|
|
* IMM stat to make JKR1(HPR) impedance measure.
|
|
* 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer
|
|
* to HPL IMM state to make JKTIP(HPL) impedance measure.
|
|
* 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and
|
|
* transfer to IMM state to determine suppression sidetone gain.
|
|
* 4. IMM state : Computes cross talk suppression sidetone gain with orignal
|
|
* and cross talk signal level. Apply this gain and then restore codec
|
|
* configuration. Then transfer to Done state for ending.
|
|
*/
|
|
static void nau8825_xtalk_measure(struct nau8825 *nau8825)
|
|
{
|
|
u32 sidetone;
|
|
|
|
switch (nau8825->xtalk_state) {
|
|
case NAU8825_XTALK_PREPARE:
|
|
/* In prepare state, set up clock, intrruption, DAC path, ADC
|
|
* path and cross talk detection parameters for preparation.
|
|
*/
|
|
nau8825_xtalk_prepare(nau8825);
|
|
msleep(280);
|
|
/* Trigger right headphone impedance detection */
|
|
nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L;
|
|
nau8825_xtalk_imm_start(nau8825, 0x00d2);
|
|
break;
|
|
case NAU8825_XTALK_HPR_R2L:
|
|
/* In right headphone IMM state, read out right headphone
|
|
* impedance measure result, and then start up left side.
|
|
*/
|
|
regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
|
|
&nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
|
|
dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n",
|
|
nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
|
|
/* Disable then re-enable IMM mode to update */
|
|
nau8825_xtalk_imm_stop(nau8825);
|
|
/* Trigger left headphone impedance detection */
|
|
nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L;
|
|
nau8825_xtalk_imm_start(nau8825, 0x00ff);
|
|
break;
|
|
case NAU8825_XTALK_HPL_R2L:
|
|
/* In left headphone IMM state, read out left headphone
|
|
* impedance measure result, and delay some time to wait
|
|
* detection sine wave output finish. Then, we can calculate
|
|
* the cross talk suppresstion side tone according to the L/R
|
|
* headphone imedance.
|
|
*/
|
|
regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
|
|
&nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
|
|
dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n",
|
|
nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
|
|
nau8825_xtalk_imm_stop(nau8825);
|
|
msleep(150);
|
|
nau8825->xtalk_state = NAU8825_XTALK_IMM;
|
|
break;
|
|
case NAU8825_XTALK_IMM:
|
|
/* In impedance measure state, the orignal and cross talk
|
|
* signal level vlues are ready. The side tone gain is deter-
|
|
* mined with these signal level. After all, restore codec
|
|
* configuration.
|
|
*/
|
|
sidetone = nau8825_xtalk_sidetone(
|
|
nau8825->imp_rms[NAU8825_XTALK_HPR_R2L],
|
|
nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
|
|
dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone);
|
|
regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL,
|
|
(sidetone << 8) | sidetone);
|
|
nau8825_xtalk_clean(nau8825, false);
|
|
nau8825->xtalk_state = NAU8825_XTALK_DONE;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void nau8825_xtalk_work(struct work_struct *work)
|
|
{
|
|
struct nau8825 *nau8825 = container_of(
|
|
work, struct nau8825, xtalk_work);
|
|
|
|
nau8825_xtalk_measure(nau8825);
|
|
/* To determine the cross talk side tone gain when reach
|
|
* the impedance measure state.
|
|
*/
|
|
if (nau8825->xtalk_state == NAU8825_XTALK_IMM)
|
|
nau8825_xtalk_measure(nau8825);
|
|
|
|
/* Delay jack report until cross talk detection process
|
|
* completed. It can avoid application to do playback
|
|
* preparation before cross talk detection is still working.
|
|
* Meanwhile, the protection of the cross talk detection
|
|
* is released.
|
|
*/
|
|
if (nau8825->xtalk_state == NAU8825_XTALK_DONE) {
|
|
snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event,
|
|
nau8825->xtalk_event_mask);
|
|
nau8825_sema_release(nau8825);
|
|
nau8825->xtalk_protect = false;
|
|
}
|
|
}
|
|
|
|
static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
|
|
{
|
|
/* If the crosstalk is eanbled and the process is on going,
|
|
* the driver forces to cancel the crosstalk task and
|
|
* restores the configuration to original status.
|
|
*/
|
|
if (nau8825->xtalk_enable && nau8825->xtalk_state !=
|
|
NAU8825_XTALK_DONE) {
|
|
cancel_work_sync(&nau8825->xtalk_work);
|
|
nau8825_xtalk_clean(nau8825, true);
|
|
}
|
|
/* Reset parameters for cross talk suppression function */
|
|
nau8825_sema_reset(nau8825);
|
|
nau8825->xtalk_state = NAU8825_XTALK_DONE;
|
|
nau8825->xtalk_protect = false;
|
|
}
|
|
|
|
static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV:
|
|
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
|
|
case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL:
|
|
case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
|
|
case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
|
|
case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
|
|
case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R:
|
|
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
|
|
case NAU8825_REG_MISC_CTRL:
|
|
case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS:
|
|
case NAU8825_REG_BIAS_ADJ:
|
|
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
|
|
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
|
|
case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
|
|
case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
|
|
}
|
|
|
|
static bool nau8825_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV:
|
|
case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
|
|
case NAU8825_REG_INTERRUPT_MASK:
|
|
case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL:
|
|
case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
|
|
case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
|
|
case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
|
|
case NAU8825_REG_IMM_MODE_CTRL:
|
|
case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
|
|
case NAU8825_REG_MISC_CTRL:
|
|
case NAU8825_REG_BIAS_ADJ:
|
|
case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
|
|
case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
|
|
case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
|
|
case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool nau8825_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case NAU8825_REG_RESET:
|
|
case NAU8825_REG_IRQ_STATUS:
|
|
case NAU8825_REG_INT_CLR_KEY_STATUS:
|
|
case NAU8825_REG_IMM_RMS_L:
|
|
case NAU8825_REG_IMM_RMS_R:
|
|
case NAU8825_REG_I2C_DEVICE_ID:
|
|
case NAU8825_REG_SARDOUT_RAM_STATUS:
|
|
case NAU8825_REG_CHARGE_PUMP_INPUT_READ:
|
|
case NAU8825_REG_GENERAL_STATUS:
|
|
case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int nau8825_adc_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
msleep(125);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
|
|
break;
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
if (!nau8825->irq)
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_pump_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
/* Prevent startup click by letting charge pump to ramp up */
|
|
msleep(10);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW);
|
|
break;
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_JAMNODCLOW, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
/* Disables the TESTDAC to let DAC signal pass through. */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_TESTDAC_EN, 0);
|
|
break;
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
struct soc_bytes_ext *params = (void *)kcontrol->private_value;
|
|
|
|
if (!component->regmap)
|
|
return -EINVAL;
|
|
|
|
regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1,
|
|
ucontrol->value.bytes.data, params->max);
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
struct soc_bytes_ext *params = (void *)kcontrol->private_value;
|
|
void *data;
|
|
|
|
if (!component->regmap)
|
|
return -EINVAL;
|
|
|
|
data = kmemdup(ucontrol->value.bytes.data,
|
|
params->max, GFP_KERNEL | GFP_DMA);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
|
|
NAU8825_BIQ_WRT_EN, 0);
|
|
regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1,
|
|
data, params->max);
|
|
regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
|
|
NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN);
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static const char * const nau8825_biq_path[] = {
|
|
"ADC", "DAC"
|
|
};
|
|
|
|
static const struct soc_enum nau8825_biq_path_enum =
|
|
SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT,
|
|
ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path);
|
|
|
|
static const char * const nau8825_adc_decimation[] = {
|
|
"32", "64", "128", "256"
|
|
};
|
|
|
|
static const struct soc_enum nau8825_adc_decimation_enum =
|
|
SOC_ENUM_SINGLE(NAU8825_REG_ADC_RATE, NAU8825_ADC_SYNC_DOWN_SFT,
|
|
ARRAY_SIZE(nau8825_adc_decimation), nau8825_adc_decimation);
|
|
|
|
static const char * const nau8825_dac_oversampl[] = {
|
|
"64", "256", "128", "", "32"
|
|
};
|
|
|
|
static const struct soc_enum nau8825_dac_oversampl_enum =
|
|
SOC_ENUM_SINGLE(NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_SFT,
|
|
ARRAY_SIZE(nau8825_dac_oversampl), nau8825_dac_oversampl);
|
|
|
|
static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400);
|
|
static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0);
|
|
static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0);
|
|
static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600);
|
|
static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -9600, 2400);
|
|
|
|
static const struct snd_kcontrol_new nau8825_controls[] = {
|
|
SOC_SINGLE_TLV("Mic Volume", NAU8825_REG_ADC_DGAIN_CTRL,
|
|
0, 0xff, 0, adc_vol_tlv),
|
|
SOC_DOUBLE_TLV("Headphone Bypass Volume", NAU8825_REG_ADC_DGAIN_CTRL,
|
|
12, 8, 0x0f, 0, sidetone_vol_tlv),
|
|
SOC_DOUBLE_TLV("Headphone Volume", NAU8825_REG_HSVOL_CTRL,
|
|
6, 0, 0x3f, 1, dac_vol_tlv),
|
|
SOC_SINGLE_TLV("Frontend PGA Volume", NAU8825_REG_POWER_UP_CONTROL,
|
|
8, 37, 0, fepga_gain_tlv),
|
|
SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8825_REG_DAC_DGAIN_CTRL,
|
|
0, 8, 0xff, 0, crosstalk_vol_tlv),
|
|
|
|
SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum),
|
|
SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum),
|
|
/* programmable biquad filter */
|
|
SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum),
|
|
SND_SOC_BYTES_EXT("BIQ Coefficients", 20,
|
|
nau8825_biq_coeff_get, nau8825_biq_coeff_put),
|
|
};
|
|
|
|
/* DAC Mux 0x33[9] and 0x34[9] */
|
|
static const char * const nau8825_dac_src[] = {
|
|
"DACL", "DACR",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
nau8825_dacl_enum, NAU8825_REG_DACL_CTRL,
|
|
NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(
|
|
nau8825_dacr_enum, NAU8825_REG_DACR_CTRL,
|
|
NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src);
|
|
|
|
static const struct snd_kcontrol_new nau8825_dacl_mux =
|
|
SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum);
|
|
|
|
static const struct snd_kcontrol_new nau8825_dacr_mux =
|
|
SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum);
|
|
|
|
|
|
static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
|
|
SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, NAU8825_REG_I2S_PCM_CTRL2,
|
|
15, 1),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC"),
|
|
SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0),
|
|
|
|
SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0,
|
|
NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0,
|
|
nau8825_adc_event, SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
|
|
0),
|
|
|
|
/* ADC for button press detection. A dapm supply widget is used to
|
|
* prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
|
|
* during suspend.
|
|
*/
|
|
SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_DACR_SFT, 0),
|
|
SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_DACL_SFT, 0),
|
|
SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux),
|
|
SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux),
|
|
|
|
SND_SOC_DAPM_PGA_S("HP amp L", 0,
|
|
NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HP amp R", 0,
|
|
NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0,
|
|
nau8825_pump_event, SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4,
|
|
NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4,
|
|
NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5,
|
|
NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5,
|
|
NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6,
|
|
NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6,
|
|
NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_PGA_S("Output DACL", 7,
|
|
NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_PGA_S("Output DACR", 7,
|
|
NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
/* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */
|
|
SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8,
|
|
NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0),
|
|
SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8,
|
|
NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0),
|
|
|
|
/* High current HPOL/R boost driver */
|
|
SND_SOC_DAPM_PGA_S("HP Boost Driver", 9,
|
|
NAU8825_REG_BOOST, 9, 1, NULL, 0),
|
|
|
|
/* Class G operation control*/
|
|
SND_SOC_DAPM_PGA_S("Class G", 10,
|
|
NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_OUTPUT("HPOL"),
|
|
SND_SOC_DAPM_OUTPUT("HPOR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
|
|
{"Frontend PGA", NULL, "MIC"},
|
|
{"ADC", NULL, "Frontend PGA"},
|
|
{"ADC", NULL, "ADC Clock"},
|
|
{"ADC", NULL, "ADC Power"},
|
|
{"AIFTX", NULL, "ADC"},
|
|
|
|
{"DDACL", NULL, "Playback"},
|
|
{"DDACR", NULL, "Playback"},
|
|
{"DDACL", NULL, "DDAC Clock"},
|
|
{"DDACR", NULL, "DDAC Clock"},
|
|
{"DACL Mux", "DACL", "DDACL"},
|
|
{"DACL Mux", "DACR", "DDACR"},
|
|
{"DACR Mux", "DACL", "DDACL"},
|
|
{"DACR Mux", "DACR", "DDACR"},
|
|
{"HP amp L", NULL, "DACL Mux"},
|
|
{"HP amp R", NULL, "DACR Mux"},
|
|
{"Charge Pump", NULL, "HP amp L"},
|
|
{"Charge Pump", NULL, "HP amp R"},
|
|
{"ADACL", NULL, "Charge Pump"},
|
|
{"ADACR", NULL, "Charge Pump"},
|
|
{"ADACL Clock", NULL, "ADACL"},
|
|
{"ADACR Clock", NULL, "ADACR"},
|
|
{"Output Driver L Stage 1", NULL, "ADACL Clock"},
|
|
{"Output Driver R Stage 1", NULL, "ADACR Clock"},
|
|
{"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"},
|
|
{"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"},
|
|
{"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"},
|
|
{"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"},
|
|
{"Output DACL", NULL, "Output Driver L Stage 3"},
|
|
{"Output DACR", NULL, "Output Driver R Stage 3"},
|
|
{"HPOL Pulldown", NULL, "Output DACL"},
|
|
{"HPOR Pulldown", NULL, "Output DACR"},
|
|
{"HP Boost Driver", NULL, "HPOL Pulldown"},
|
|
{"HP Boost Driver", NULL, "HPOR Pulldown"},
|
|
{"Class G", NULL, "HP Boost Driver"},
|
|
{"HPOL", NULL, "Class G"},
|
|
{"HPOR", NULL, "Class G"},
|
|
};
|
|
|
|
static int nau8825_clock_check(struct nau8825 *nau8825,
|
|
int stream, int rate, int osr)
|
|
{
|
|
int osrate;
|
|
|
|
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (osr >= ARRAY_SIZE(osr_dac_sel))
|
|
return -EINVAL;
|
|
osrate = osr_dac_sel[osr].osr;
|
|
} else {
|
|
if (osr >= ARRAY_SIZE(osr_adc_sel))
|
|
return -EINVAL;
|
|
osrate = osr_adc_sel[osr].osr;
|
|
}
|
|
|
|
if (!osrate || rate * osr > CLK_DA_AD_MAX) {
|
|
dev_err(nau8825->dev, "exceed the maximum frequency of CLK_ADC or CLK_DAC\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div;
|
|
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
|
|
/* CLK_DAC or CLK_ADC = OSR * FS
|
|
* DAC or ADC clock frequency is defined as Over Sampling Rate (OSR)
|
|
* multiplied by the audio sample rate (Fs). Note that the OSR and Fs
|
|
* values must be selected such that the maximum frequency is less
|
|
* than 6.144 MHz.
|
|
*/
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr);
|
|
osr &= NAU8825_DAC_OVERSAMPLE_MASK;
|
|
if (nau8825_clock_check(nau8825, substream->stream,
|
|
params_rate(params), osr)) {
|
|
nau8825_sema_release(nau8825);
|
|
return -EINVAL;
|
|
}
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_DAC_SRC_MASK,
|
|
osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT);
|
|
} else {
|
|
regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr);
|
|
osr &= NAU8825_ADC_SYNC_DOWN_MASK;
|
|
if (nau8825_clock_check(nau8825, substream->stream,
|
|
params_rate(params), osr)) {
|
|
nau8825_sema_release(nau8825);
|
|
return -EINVAL;
|
|
}
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_ADC_SRC_MASK,
|
|
osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT);
|
|
}
|
|
|
|
/* make BCLK and LRC divde configuration if the codec as master. */
|
|
regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, &ctrl_val);
|
|
if (ctrl_val & NAU8825_I2S_MS_MASTER) {
|
|
/* get the bclk and fs ratio */
|
|
bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params);
|
|
if (bclk_fs <= 32)
|
|
bclk_div = 2;
|
|
else if (bclk_fs <= 64)
|
|
bclk_div = 1;
|
|
else if (bclk_fs <= 128)
|
|
bclk_div = 0;
|
|
else {
|
|
nau8825_sema_release(nau8825);
|
|
return -EINVAL;
|
|
}
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK,
|
|
((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div);
|
|
}
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
val_len |= NAU8825_I2S_DL_16;
|
|
break;
|
|
case 20:
|
|
val_len |= NAU8825_I2S_DL_20;
|
|
break;
|
|
case 24:
|
|
val_len |= NAU8825_I2S_DL_24;
|
|
break;
|
|
case 32:
|
|
val_len |= NAU8825_I2S_DL_32;
|
|
break;
|
|
default:
|
|
nau8825_sema_release(nau8825);
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
|
|
NAU8825_I2S_DL_MASK, val_len);
|
|
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
unsigned int ctrl1_val = 0, ctrl2_val = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
ctrl2_val |= NAU8825_I2S_MS_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
ctrl1_val |= NAU8825_I2S_BP_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
ctrl1_val |= NAU8825_I2S_DF_I2S;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
ctrl1_val |= NAU8825_I2S_DF_LEFT;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
ctrl1_val |= NAU8825_I2S_DF_RIGTH;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
|
|
ctrl1_val |= NAU8825_I2S_PCMB_EN;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
|
|
NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK |
|
|
NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
|
|
ctrl1_val);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_MS_MASK, ctrl2_val);
|
|
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops nau8825_dai_ops = {
|
|
.hw_params = nau8825_hw_params,
|
|
.set_fmt = nau8825_set_dai_fmt,
|
|
};
|
|
|
|
#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000
|
|
#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
|
|
| SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_driver nau8825_dai = {
|
|
.name = "nau8825-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = NAU8825_RATES,
|
|
.formats = NAU8825_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 1,
|
|
.rates = NAU8825_RATES,
|
|
.formats = NAU8825_FORMATS,
|
|
},
|
|
.ops = &nau8825_dai_ops,
|
|
};
|
|
|
|
/**
|
|
* nau8825_enable_jack_detect - Specify a jack for event reporting
|
|
*
|
|
* @component: component to register the jack with
|
|
* @jack: jack to use to report headset and button events on
|
|
*
|
|
* After this function has been called the headset insert/remove and button
|
|
* events will be routed to the given jack. Jack can be null to stop
|
|
* reporting.
|
|
*/
|
|
int nau8825_enable_jack_detect(struct snd_soc_component *component,
|
|
struct snd_soc_jack *jack)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
nau8825->jack = jack;
|
|
|
|
/* Ground HP Outputs[1:0], needed for headset auto detection
|
|
* Enable Automatic Mic/Gnd switching reading on insert interrupt[6]
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
|
|
NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
|
|
NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect);
|
|
|
|
|
|
static bool nau8825_is_jack_inserted(struct regmap *regmap)
|
|
{
|
|
bool active_high, is_high;
|
|
int status, jkdet;
|
|
|
|
regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet);
|
|
active_high = jkdet & NAU8825_JACK_POLARITY;
|
|
regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status);
|
|
is_high = status & NAU8825_GPIO2JD1;
|
|
/* return jack connection status according to jack insertion logic
|
|
* active high or active low.
|
|
*/
|
|
return active_high == is_high;
|
|
}
|
|
|
|
static void nau8825_restart_jack_detection(struct regmap *regmap)
|
|
{
|
|
/* this will restart the entire jack detection process including MIC/GND
|
|
* switching and create interrupts. We have to go from 0 to 1 and back
|
|
* to 0 to restart.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART);
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_DET_RESTART, 0);
|
|
}
|
|
|
|
static void nau8825_int_status_clear_all(struct regmap *regmap)
|
|
{
|
|
int active_irq, clear_irq, i;
|
|
|
|
/* Reset the intrruption status from rightmost bit if the corres-
|
|
* ponding irq event occurs.
|
|
*/
|
|
regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
|
|
for (i = 0; i < NAU8825_REG_DATA_LEN; i++) {
|
|
clear_irq = (0x1 << i);
|
|
if (active_irq & clear_irq)
|
|
regmap_write(regmap,
|
|
NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
|
|
}
|
|
}
|
|
|
|
static void nau8825_eject_jack(struct nau8825 *nau8825)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = nau8825->dapm;
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
/* Force to cancel the cross talk detection process */
|
|
nau8825_xtalk_cancel(nau8825);
|
|
|
|
snd_soc_dapm_disable_pin(dapm, "SAR");
|
|
snd_soc_dapm_disable_pin(dapm, "MICBIAS");
|
|
/* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
|
|
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
|
|
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
|
|
/* ground HPL/HPR, MICGRND1/2 */
|
|
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf);
|
|
|
|
snd_soc_dapm_sync(dapm);
|
|
|
|
/* Clear all interruption status */
|
|
nau8825_int_status_clear_all(regmap);
|
|
|
|
/* Enable the insertion interruption, disable the ejection inter-
|
|
* ruption, and then bypass de-bounce circuit.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
|
|
NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS,
|
|
NAU8825_IRQ_EJECT_DIS);
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
|
|
NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN,
|
|
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
|
|
NAU8825_IRQ_HEADSET_COMPLETE_EN);
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
|
|
|
|
/* Disable ADC needed for interruptions at audo mode */
|
|
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_ADC, 0);
|
|
|
|
/* Close clock for jack type detection at manual mode */
|
|
nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
|
|
}
|
|
|
|
/* Enable audo mode interruptions with internal clock. */
|
|
static void nau8825_setup_auto_irq(struct nau8825 *nau8825)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
/* Enable headset jack type detection complete interruption and
|
|
* jack ejection interruption.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0);
|
|
|
|
/* Enable internal VCO needed for interruptions */
|
|
nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
|
|
|
|
/* Enable ADC needed for interruptions */
|
|
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
|
|
|
|
/* Chip needs one FSCLK cycle in order to generate interruptions,
|
|
* as we cannot guarantee one will be provided by the system. Turning
|
|
* master mode on then off enables us to generate that FSCLK cycle
|
|
* with a minimum of contention on the clock bus.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
|
|
regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
|
|
NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
|
|
|
|
/* Not bypass de-bounce circuit */
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_DET_DB_BYPASS, 0);
|
|
|
|
/* Unmask all interruptions */
|
|
regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0);
|
|
|
|
/* Restart the jack detection process at auto mode */
|
|
nau8825_restart_jack_detection(regmap);
|
|
}
|
|
|
|
static int nau8825_button_decode(int value)
|
|
{
|
|
int buttons = 0;
|
|
|
|
/* The chip supports up to 8 buttons, but ALSA defines only 6 buttons */
|
|
if (value & BIT(0))
|
|
buttons |= SND_JACK_BTN_0;
|
|
if (value & BIT(1))
|
|
buttons |= SND_JACK_BTN_1;
|
|
if (value & BIT(2))
|
|
buttons |= SND_JACK_BTN_2;
|
|
if (value & BIT(3))
|
|
buttons |= SND_JACK_BTN_3;
|
|
if (value & BIT(4))
|
|
buttons |= SND_JACK_BTN_4;
|
|
if (value & BIT(5))
|
|
buttons |= SND_JACK_BTN_5;
|
|
|
|
return buttons;
|
|
}
|
|
|
|
static int nau8825_jack_insert(struct nau8825 *nau8825)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
struct snd_soc_dapm_context *dapm = nau8825->dapm;
|
|
int jack_status_reg, mic_detected;
|
|
int type = 0;
|
|
|
|
regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg);
|
|
mic_detected = (jack_status_reg >> 10) & 3;
|
|
/* The JKSLV and JKR2 all detected in high impedance headset */
|
|
if (mic_detected == 0x3)
|
|
nau8825->high_imped = true;
|
|
else
|
|
nau8825->high_imped = false;
|
|
|
|
switch (mic_detected) {
|
|
case 0:
|
|
/* no mic */
|
|
type = SND_JACK_HEADPHONE;
|
|
break;
|
|
case 1:
|
|
dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n");
|
|
type = SND_JACK_HEADSET;
|
|
|
|
/* Unground MICGND1 */
|
|
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
|
|
1 << 2);
|
|
/* Attach 2kOhm Resistor from MICBIAS to MICGND1 */
|
|
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
|
|
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
|
|
NAU8825_MICBIAS_JKR2);
|
|
/* Attach SARADC to MICGND1 */
|
|
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_INPUT_MASK,
|
|
NAU8825_SAR_INPUT_JKR2);
|
|
|
|
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
|
|
snd_soc_dapm_force_enable_pin(dapm, "SAR");
|
|
snd_soc_dapm_sync(dapm);
|
|
break;
|
|
case 2:
|
|
dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n");
|
|
type = SND_JACK_HEADSET;
|
|
|
|
/* Unground MICGND2 */
|
|
regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
|
|
2 << 2);
|
|
/* Attach 2kOhm Resistor from MICBIAS to MICGND2 */
|
|
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
|
|
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
|
|
NAU8825_MICBIAS_JKSLV);
|
|
/* Attach SARADC to MICGND2 */
|
|
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_INPUT_MASK,
|
|
NAU8825_SAR_INPUT_JKSLV);
|
|
|
|
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
|
|
snd_soc_dapm_force_enable_pin(dapm, "SAR");
|
|
snd_soc_dapm_sync(dapm);
|
|
break;
|
|
case 3:
|
|
/* detect error case */
|
|
dev_err(nau8825->dev, "detection error; disable mic function\n");
|
|
type = SND_JACK_HEADPHONE;
|
|
break;
|
|
}
|
|
|
|
/* Leaving HPOL/R grounded after jack insert by default. They will be
|
|
* ungrounded as part of the widget power up sequence at the beginning
|
|
* of playback to reduce pop.
|
|
*/
|
|
return type;
|
|
}
|
|
|
|
#define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \
|
|
SND_JACK_BTN_2 | SND_JACK_BTN_3)
|
|
|
|
static irqreturn_t nau8825_interrupt(int irq, void *data)
|
|
{
|
|
struct nau8825 *nau8825 = (struct nau8825 *)data;
|
|
struct regmap *regmap = nau8825->regmap;
|
|
int active_irq, clear_irq = 0, event = 0, event_mask = 0;
|
|
|
|
if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
|
|
dev_err(nau8825->dev, "failed to read irq status\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
|
|
NAU8825_JACK_EJECTION_DETECTED) {
|
|
|
|
nau8825_eject_jack(nau8825);
|
|
event_mask |= SND_JACK_HEADSET;
|
|
clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK;
|
|
} else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) {
|
|
int key_status;
|
|
|
|
regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS,
|
|
&key_status);
|
|
|
|
/* upper 8 bits of the register are for short pressed keys,
|
|
* lower 8 bits - for long pressed buttons
|
|
*/
|
|
nau8825->button_pressed = nau8825_button_decode(
|
|
key_status >> 8);
|
|
|
|
event |= nau8825->button_pressed;
|
|
event_mask |= NAU8825_BUTTONS;
|
|
clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ;
|
|
} else if (active_irq & NAU8825_KEY_RELEASE_IRQ) {
|
|
event_mask = NAU8825_BUTTONS;
|
|
clear_irq = NAU8825_KEY_RELEASE_IRQ;
|
|
} else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
|
|
if (nau8825_is_jack_inserted(regmap)) {
|
|
event |= nau8825_jack_insert(nau8825);
|
|
if (nau8825->xtalk_enable && !nau8825->high_imped) {
|
|
/* Apply the cross talk suppression in the
|
|
* headset without high impedance.
|
|
*/
|
|
if (!nau8825->xtalk_protect) {
|
|
/* Raise protection for cross talk de-
|
|
* tection if no protection before.
|
|
* The driver has to cancel the pro-
|
|
* cess and restore changes if process
|
|
* is ongoing when ejection.
|
|
*/
|
|
int ret;
|
|
nau8825->xtalk_protect = true;
|
|
ret = nau8825_sema_acquire(nau8825, 0);
|
|
if (ret)
|
|
nau8825->xtalk_protect = false;
|
|
}
|
|
/* Startup cross talk detection process */
|
|
if (nau8825->xtalk_protect) {
|
|
nau8825->xtalk_state =
|
|
NAU8825_XTALK_PREPARE;
|
|
schedule_work(&nau8825->xtalk_work);
|
|
}
|
|
} else {
|
|
/* The cross talk suppression shouldn't apply
|
|
* in the headset with high impedance. Thus,
|
|
* relieve the protection raised before.
|
|
*/
|
|
if (nau8825->xtalk_protect) {
|
|
nau8825_sema_release(nau8825);
|
|
nau8825->xtalk_protect = false;
|
|
}
|
|
}
|
|
} else {
|
|
dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n");
|
|
nau8825_eject_jack(nau8825);
|
|
}
|
|
|
|
event_mask |= SND_JACK_HEADSET;
|
|
clear_irq = NAU8825_HEADSET_COMPLETION_IRQ;
|
|
/* Record the interruption report event for driver to report
|
|
* the event later. The jack report will delay until cross
|
|
* talk detection process is done.
|
|
*/
|
|
if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) {
|
|
nau8825->xtalk_event = event;
|
|
nau8825->xtalk_event_mask = event_mask;
|
|
}
|
|
} else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
|
|
/* crosstalk detection enable and process on going */
|
|
if (nau8825->xtalk_enable && nau8825->xtalk_protect)
|
|
schedule_work(&nau8825->xtalk_work);
|
|
clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
|
|
} else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
|
|
NAU8825_JACK_INSERTION_DETECTED) {
|
|
/* One more step to check GPIO status directly. Thus, the
|
|
* driver can confirm the real insertion interruption because
|
|
* the intrruption at manual mode has bypassed debounce
|
|
* circuit which can get rid of unstable status.
|
|
*/
|
|
if (nau8825_is_jack_inserted(regmap)) {
|
|
/* Turn off insertion interruption at manual mode */
|
|
regmap_update_bits(regmap,
|
|
NAU8825_REG_INTERRUPT_DIS_CTRL,
|
|
NAU8825_IRQ_INSERT_DIS,
|
|
NAU8825_IRQ_INSERT_DIS);
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN);
|
|
/* Enable interruption for jack type detection at audo
|
|
* mode which can detect microphone and jack type.
|
|
*/
|
|
nau8825_setup_auto_irq(nau8825);
|
|
}
|
|
}
|
|
|
|
if (!clear_irq)
|
|
clear_irq = active_irq;
|
|
/* clears the rightmost interruption */
|
|
regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
|
|
|
|
/* Delay jack report until cross talk detection is done. It can avoid
|
|
* application to do playback preparation when cross talk detection
|
|
* process is still working. Otherwise, the resource like clock and
|
|
* power will be issued by them at the same time and conflict happens.
|
|
*/
|
|
if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE)
|
|
snd_soc_jack_report(nau8825->jack, event, event_mask);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void nau8825_setup_buttons(struct nau8825 *nau8825)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_TRACKING_GAIN_MASK,
|
|
nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT);
|
|
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_COMPARE_TIME_MASK,
|
|
nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT);
|
|
regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
|
|
NAU8825_SAR_SAMPLING_TIME_MASK,
|
|
nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT);
|
|
|
|
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
|
|
NAU8825_KEYDET_LEVELS_NR_MASK,
|
|
(nau8825->sar_threshold_num - 1) << NAU8825_KEYDET_LEVELS_NR_SFT);
|
|
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
|
|
NAU8825_KEYDET_HYSTERESIS_MASK,
|
|
nau8825->sar_hysteresis << NAU8825_KEYDET_HYSTERESIS_SFT);
|
|
regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
|
|
NAU8825_KEYDET_SHORTKEY_DEBOUNCE_MASK,
|
|
nau8825->key_debounce << NAU8825_KEYDET_SHORTKEY_DEBOUNCE_SFT);
|
|
|
|
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1,
|
|
(nau8825->sar_threshold[0] << 8) | nau8825->sar_threshold[1]);
|
|
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2,
|
|
(nau8825->sar_threshold[2] << 8) | nau8825->sar_threshold[3]);
|
|
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_3,
|
|
(nau8825->sar_threshold[4] << 8) | nau8825->sar_threshold[5]);
|
|
regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_4,
|
|
(nau8825->sar_threshold[6] << 8) | nau8825->sar_threshold[7]);
|
|
|
|
/* Enable short press and release interruptions */
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_KEY_SHORT_PRESS_EN | NAU8825_IRQ_KEY_RELEASE_EN,
|
|
0);
|
|
}
|
|
|
|
static void nau8825_init_regs(struct nau8825 *nau8825)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
/* Latch IIC LSB value */
|
|
regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001);
|
|
/* Enable Bias/Vmid */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_VMID, NAU8825_BIAS_VMID);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
|
|
NAU8825_GLOBAL_BIAS_EN, NAU8825_GLOBAL_BIAS_EN);
|
|
|
|
/* VMID Tieoff */
|
|
regmap_update_bits(regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_VMID_SEL_MASK,
|
|
nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT);
|
|
/* Disable Boost Driver, Automatic Short circuit protection enable */
|
|
regmap_update_bits(regmap, NAU8825_REG_BOOST,
|
|
NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
|
|
NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN,
|
|
NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
|
|
NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN);
|
|
|
|
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
|
|
NAU8825_JKDET_OUTPUT_EN,
|
|
nau8825->jkdet_enable ? 0 : NAU8825_JKDET_OUTPUT_EN);
|
|
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
|
|
NAU8825_JKDET_PULL_EN,
|
|
nau8825->jkdet_pull_enable ? 0 : NAU8825_JKDET_PULL_EN);
|
|
regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
|
|
NAU8825_JKDET_PULL_UP,
|
|
nau8825->jkdet_pull_up ? NAU8825_JKDET_PULL_UP : 0);
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_POLARITY,
|
|
/* jkdet_polarity - 1 is for active-low */
|
|
nau8825->jkdet_polarity ? 0 : NAU8825_JACK_POLARITY);
|
|
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_INSERT_DEBOUNCE_MASK,
|
|
nau8825->jack_insert_debounce << NAU8825_JACK_INSERT_DEBOUNCE_SFT);
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_EJECT_DEBOUNCE_MASK,
|
|
nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
|
|
|
|
/* Pull up IRQ pin */
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,
|
|
NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN);
|
|
/* Mask unneeded IRQs: 1 - disable, 0 - enable */
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
|
|
|
|
regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
|
|
NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage);
|
|
|
|
if (nau8825->sar_threshold_num)
|
|
nau8825_setup_buttons(nau8825);
|
|
|
|
/* Default oversampling/decimations settings are unusable
|
|
* (audible hiss). Set it to something better.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_ADC_RATE,
|
|
NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN,
|
|
NAU8825_ADC_SYNC_DOWN_64);
|
|
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
|
|
NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64);
|
|
/* Disable DACR/L power */
|
|
regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
|
|
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
|
|
NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
|
|
/* Enable TESTDAC. This sets the analog DAC inputs to a '0' input
|
|
* signal to avoid any glitches due to power up transients in both
|
|
* the analog and digital DAC circuit.
|
|
*/
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
|
|
NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
|
|
/* CICCLP off */
|
|
regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
|
|
NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF);
|
|
|
|
/* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */
|
|
regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2,
|
|
NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
|
|
NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB,
|
|
NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
|
|
NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB);
|
|
/* Class G timer 64ms */
|
|
regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL,
|
|
NAU8825_CLASSG_TIMER_MASK,
|
|
0x20 << NAU8825_CLASSG_TIMER_SFT);
|
|
/* DAC clock delay 2ns, VREF */
|
|
regmap_update_bits(regmap, NAU8825_REG_RDAC,
|
|
NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK,
|
|
(0x2 << NAU8825_RDAC_CLK_DELAY_SFT) |
|
|
(0x3 << NAU8825_RDAC_VREF_SFT));
|
|
/* Config L/R channel */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
|
|
NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
|
|
NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R);
|
|
/* Disable short Frame Sync detection logic */
|
|
regmap_update_bits(regmap, NAU8825_REG_LEFT_TIME_SLOT,
|
|
NAU8825_DIS_FS_SHORT_DET, NAU8825_DIS_FS_SHORT_DET);
|
|
}
|
|
|
|
static const struct regmap_config nau8825_regmap_config = {
|
|
.val_bits = NAU8825_REG_DATA_LEN,
|
|
.reg_bits = NAU8825_REG_ADDR_LEN,
|
|
|
|
.max_register = NAU8825_REG_MAX,
|
|
.readable_reg = nau8825_readable_reg,
|
|
.writeable_reg = nau8825_writeable_reg,
|
|
.volatile_reg = nau8825_volatile_reg,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.reg_defaults = nau8825_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults),
|
|
};
|
|
|
|
static int nau8825_component_probe(struct snd_soc_component *component)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
|
|
nau8825->dapm = dapm;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nau8825_component_remove(struct snd_soc_component *component)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
/* Cancel and reset cross tak suppresstion detection funciton */
|
|
nau8825_xtalk_cancel(nau8825);
|
|
}
|
|
|
|
/**
|
|
* nau8825_calc_fll_param - Calculate FLL parameters.
|
|
* @fll_in: external clock provided to codec.
|
|
* @fs: sampling rate.
|
|
* @fll_param: Pointer to structure of FLL parameters.
|
|
*
|
|
* Calculate FLL parameters to configure codec.
|
|
*
|
|
* Returns 0 for success or negative error code.
|
|
*/
|
|
static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
|
|
struct nau8825_fll *fll_param)
|
|
{
|
|
u64 fvco, fvco_max;
|
|
unsigned int fref, i, fvco_sel;
|
|
|
|
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
|
|
* freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
|
|
* FREF = freq_in / NAU8825_FLL_REF_DIV_MASK
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
|
|
fref = fll_in / fll_pre_scalar[i].param;
|
|
if (fref <= NAU_FREF_MAX)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(fll_pre_scalar))
|
|
return -EINVAL;
|
|
fll_param->clk_ref_div = fll_pre_scalar[i].val;
|
|
|
|
/* Choose the FLL ratio based on FREF */
|
|
for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
|
|
if (fref >= fll_ratio[i].param)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(fll_ratio))
|
|
return -EINVAL;
|
|
fll_param->ratio = fll_ratio[i].val;
|
|
|
|
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
|
|
* FDCO must be within the 90MHz - 124MHz or the FFL cannot be
|
|
* guaranteed across the full range of operation.
|
|
* FDCO = freq_out * 2 * mclk_src_scaling
|
|
*/
|
|
fvco_max = 0;
|
|
fvco_sel = ARRAY_SIZE(mclk_src_scaling);
|
|
for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
|
|
fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param;
|
|
if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
|
|
fvco_max < fvco) {
|
|
fvco_max = fvco;
|
|
fvco_sel = i;
|
|
}
|
|
}
|
|
if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
|
|
return -EINVAL;
|
|
fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
|
|
|
|
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
|
|
* input based on FDCO, FREF and FLL ratio.
|
|
*/
|
|
fvco = div_u64(fvco_max << 16, fref * fll_param->ratio);
|
|
fll_param->fll_int = (fvco >> 16) & 0x3FF;
|
|
fll_param->fll_frac = fvco & 0xFFFF;
|
|
return 0;
|
|
}
|
|
|
|
static void nau8825_fll_apply(struct nau8825 *nau8825,
|
|
struct nau8825_fll *fll_param)
|
|
{
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK,
|
|
NAU8825_CLK_SRC_MCLK | fll_param->mclk_src);
|
|
/* Make DSP operate at high speed for better performance. */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
|
|
NAU8825_FLL_RATIO_MASK | NAU8825_ICTRL_LATCH_MASK,
|
|
fll_param->ratio | (0x6 << NAU8825_ICTRL_LATCH_SFT));
|
|
/* FLL 16-bit fractional input */
|
|
regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac);
|
|
/* FLL 10-bit integer input */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3,
|
|
NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
|
|
/* FLL pre-scaler */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4,
|
|
NAU8825_FLL_REF_DIV_MASK,
|
|
fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT);
|
|
/* select divided VCO input */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
|
|
NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF);
|
|
/* Disable free-running mode */
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_FLL6, NAU8825_DCO_EN, 0);
|
|
if (fll_param->fll_frac) {
|
|
/* set FLL loop filter enable and cutoff frequency at 500Khz */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
|
|
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
|
|
NAU8825_FLL_FTR_SW_MASK,
|
|
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
|
|
NAU8825_FLL_FTR_SW_FILTER);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
|
|
NAU8825_SDM_EN | NAU8825_CUTOFF500,
|
|
NAU8825_SDM_EN | NAU8825_CUTOFF500);
|
|
} else {
|
|
/* disable FLL loop filter and cutoff frequency */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
|
|
NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
|
|
NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
|
|
NAU8825_SDM_EN | NAU8825_CUTOFF500, 0);
|
|
}
|
|
}
|
|
|
|
/* freq_out must be 256*Fs in order to achieve the best performance */
|
|
static int nau8825_set_pll(struct snd_soc_component *component, int pll_id, int source,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
struct nau8825_fll fll_param;
|
|
int ret, fs;
|
|
|
|
fs = freq_out / 256;
|
|
ret = nau8825_calc_fll_param(freq_in, fs, &fll_param);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
|
|
return ret;
|
|
}
|
|
dev_dbg(component->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
|
|
fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
|
|
fll_param.fll_int, fll_param.clk_ref_div);
|
|
|
|
nau8825_fll_apply(nau8825, &fll_param);
|
|
mdelay(2);
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq)
|
|
{
|
|
int ret = 0;
|
|
|
|
nau8825->mclk = devm_clk_get(nau8825->dev, "mclk");
|
|
if (IS_ERR(nau8825->mclk)) {
|
|
dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally");
|
|
return 0;
|
|
}
|
|
|
|
if (!nau8825->mclk_freq) {
|
|
ret = clk_prepare_enable(nau8825->mclk);
|
|
if (ret) {
|
|
dev_err(nau8825->dev, "Unable to prepare codec mclk\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (nau8825->mclk_freq != freq) {
|
|
freq = clk_round_rate(nau8825->mclk, freq);
|
|
ret = clk_set_rate(nau8825->mclk, freq);
|
|
if (ret) {
|
|
dev_err(nau8825->dev, "Unable to set mclk rate\n");
|
|
return ret;
|
|
}
|
|
nau8825->mclk_freq = freq;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap)
|
|
{
|
|
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK);
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL6,
|
|
NAU8825_DCO_EN, 0);
|
|
/* Make DSP operate as default setting for power saving. */
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL1,
|
|
NAU8825_ICTRL_LATCH_MASK, 0);
|
|
}
|
|
|
|
static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
|
|
unsigned int freq)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
int ret;
|
|
|
|
switch (clk_id) {
|
|
case NAU8825_CLK_DIS:
|
|
/* Clock provided externally and disable internal VCO clock */
|
|
nau8825_configure_mclk_as_sysclk(regmap);
|
|
if (nau8825->mclk_freq) {
|
|
clk_disable_unprepare(nau8825->mclk);
|
|
nau8825->mclk_freq = 0;
|
|
}
|
|
|
|
break;
|
|
case NAU8825_CLK_MCLK:
|
|
/* Acquire the semaphore to synchronize the playback and
|
|
* interrupt handler. In order to avoid the playback inter-
|
|
* fered by cross talk process, the driver make the playback
|
|
* preparation halted until cross talk process finish.
|
|
*/
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
nau8825_configure_mclk_as_sysclk(regmap);
|
|
/* MCLK not changed by clock tree */
|
|
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_MCLK_SRC_MASK, 0);
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
ret = nau8825_mclk_prepare(nau8825, freq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
break;
|
|
case NAU8825_CLK_INTERNAL:
|
|
if (nau8825_is_jack_inserted(nau8825->regmap)) {
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL6,
|
|
NAU8825_DCO_EN, NAU8825_DCO_EN);
|
|
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
|
|
/* Decrease the VCO frequency and make DSP operate
|
|
* as default setting for power saving.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
|
|
NAU8825_CLK_MCLK_SRC_MASK, 0xf);
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL1,
|
|
NAU8825_ICTRL_LATCH_MASK |
|
|
NAU8825_FLL_RATIO_MASK, 0x10);
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL6,
|
|
NAU8825_SDM_EN, NAU8825_SDM_EN);
|
|
} else {
|
|
/* The clock turns off intentionally for power saving
|
|
* when no headset connected.
|
|
*/
|
|
nau8825_configure_mclk_as_sysclk(regmap);
|
|
dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n");
|
|
}
|
|
if (nau8825->mclk_freq) {
|
|
clk_disable_unprepare(nau8825->mclk);
|
|
nau8825->mclk_freq = 0;
|
|
}
|
|
|
|
break;
|
|
case NAU8825_CLK_FLL_MCLK:
|
|
/* Acquire the semaphore to synchronize the playback and
|
|
* interrupt handler. In order to avoid the playback inter-
|
|
* fered by cross talk process, the driver make the playback
|
|
* preparation halted until cross talk process finish.
|
|
*/
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
/* Higher FLL reference input frequency can only set lower
|
|
* gain error, such as 0000 for input reference from MCLK
|
|
* 12.288Mhz.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL3,
|
|
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
|
|
NAU8825_FLL_CLK_SRC_MCLK | 0);
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
ret = nau8825_mclk_prepare(nau8825, freq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
break;
|
|
case NAU8825_CLK_FLL_BLK:
|
|
/* Acquire the semaphore to synchronize the playback and
|
|
* interrupt handler. In order to avoid the playback inter-
|
|
* fered by cross talk process, the driver make the playback
|
|
* preparation halted until cross talk process finish.
|
|
*/
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
/* If FLL reference input is from low frequency source,
|
|
* higher error gain can apply such as 0xf which has
|
|
* the most sensitive gain error correction threshold,
|
|
* Therefore, FLL has the most accurate DCO to
|
|
* target frequency.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL3,
|
|
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
|
|
NAU8825_FLL_CLK_SRC_BLK |
|
|
(0xf << NAU8825_GAIN_ERR_SFT));
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
if (nau8825->mclk_freq) {
|
|
clk_disable_unprepare(nau8825->mclk);
|
|
nau8825->mclk_freq = 0;
|
|
}
|
|
|
|
break;
|
|
case NAU8825_CLK_FLL_FS:
|
|
/* Acquire the semaphore to synchronize the playback and
|
|
* interrupt handler. In order to avoid the playback inter-
|
|
* fered by cross talk process, the driver make the playback
|
|
* preparation halted until cross talk process finish.
|
|
*/
|
|
nau8825_sema_acquire(nau8825, 3 * HZ);
|
|
/* If FLL reference input is from low frequency source,
|
|
* higher error gain can apply such as 0xf which has
|
|
* the most sensitive gain error correction threshold,
|
|
* Therefore, FLL has the most accurate DCO to
|
|
* target frequency.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_FLL3,
|
|
NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
|
|
NAU8825_FLL_CLK_SRC_FS |
|
|
(0xf << NAU8825_GAIN_ERR_SFT));
|
|
/* Release the semaphore. */
|
|
nau8825_sema_release(nau8825);
|
|
|
|
if (nau8825->mclk_freq) {
|
|
clk_disable_unprepare(nau8825->mclk);
|
|
nau8825->mclk_freq = 0;
|
|
}
|
|
|
|
break;
|
|
default:
|
|
dev_err(nau8825->dev, "Invalid clock id (%d)\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(nau8825->dev, "Sysclk is %dHz and clock id is %d\n", freq,
|
|
clk_id);
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_set_sysclk(struct snd_soc_component *component, int clk_id,
|
|
int source, unsigned int freq, int dir)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
return nau8825_configure_sysclk(nau8825, clk_id, freq);
|
|
}
|
|
|
|
static int nau8825_resume_setup(struct nau8825 *nau8825)
|
|
{
|
|
struct regmap *regmap = nau8825->regmap;
|
|
|
|
/* Close clock when jack type detection at manual mode */
|
|
nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
|
|
|
|
/* Clear all interruption status */
|
|
nau8825_int_status_clear_all(regmap);
|
|
|
|
/* Enable both insertion and ejection interruptions, and then
|
|
* bypass de-bounce circuit.
|
|
*/
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
|
|
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN |
|
|
NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN,
|
|
NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN);
|
|
regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
|
|
NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
|
|
regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
|
|
NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
int ret;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
|
|
if (nau8825->mclk_freq) {
|
|
ret = clk_prepare_enable(nau8825->mclk);
|
|
if (ret) {
|
|
dev_err(nau8825->dev, "Unable to prepare component mclk\n");
|
|
return ret;
|
|
}
|
|
}
|
|
/* Setup codec configuration after resume */
|
|
nau8825_resume_setup(nau8825);
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
/* Reset the configuration of jack type for detection */
|
|
/* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_MIC_BIAS,
|
|
NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
|
|
/* ground HPL/HPR, MICGRND1/2 */
|
|
regmap_update_bits(nau8825->regmap,
|
|
NAU8825_REG_HSD_CTRL, 0xf, 0xf);
|
|
/* Cancel and reset cross talk detection funciton */
|
|
nau8825_xtalk_cancel(nau8825);
|
|
/* Turn off all interruptions before system shutdown. Keep the
|
|
* interruption quiet before resume setup completes.
|
|
*/
|
|
regmap_write(nau8825->regmap,
|
|
NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff);
|
|
/* Disable ADC needed for interruptions at audo mode */
|
|
regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
|
|
NAU8825_ENABLE_ADC, 0);
|
|
if (nau8825->mclk_freq)
|
|
clk_disable_unprepare(nau8825->mclk);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused nau8825_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
|
|
disable_irq(nau8825->irq);
|
|
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
|
|
/* Power down codec power; don't suppoet button wakeup */
|
|
snd_soc_dapm_disable_pin(nau8825->dapm, "SAR");
|
|
snd_soc_dapm_disable_pin(nau8825->dapm, "MICBIAS");
|
|
snd_soc_dapm_sync(nau8825->dapm);
|
|
regcache_cache_only(nau8825->regmap, true);
|
|
regcache_mark_dirty(nau8825->regmap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused nau8825_resume(struct snd_soc_component *component)
|
|
{
|
|
struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
|
|
int ret;
|
|
|
|
regcache_cache_only(nau8825->regmap, false);
|
|
regcache_sync(nau8825->regmap);
|
|
nau8825->xtalk_protect = true;
|
|
ret = nau8825_sema_acquire(nau8825, 0);
|
|
if (ret)
|
|
nau8825->xtalk_protect = false;
|
|
enable_irq(nau8825->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_component_driver nau8825_component_driver = {
|
|
.probe = nau8825_component_probe,
|
|
.remove = nau8825_component_remove,
|
|
.set_sysclk = nau8825_set_sysclk,
|
|
.set_pll = nau8825_set_pll,
|
|
.set_bias_level = nau8825_set_bias_level,
|
|
.suspend = nau8825_suspend,
|
|
.resume = nau8825_resume,
|
|
.controls = nau8825_controls,
|
|
.num_controls = ARRAY_SIZE(nau8825_controls),
|
|
.dapm_widgets = nau8825_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets),
|
|
.dapm_routes = nau8825_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes),
|
|
.suspend_bias_off = 1,
|
|
.idle_bias_on = 1,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static void nau8825_reset_chip(struct regmap *regmap)
|
|
{
|
|
regmap_write(regmap, NAU8825_REG_RESET, 0x00);
|
|
regmap_write(regmap, NAU8825_REG_RESET, 0x00);
|
|
}
|
|
|
|
static void nau8825_print_device_properties(struct nau8825 *nau8825)
|
|
{
|
|
int i;
|
|
struct device *dev = nau8825->dev;
|
|
|
|
dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable);
|
|
dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable);
|
|
dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up);
|
|
dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity);
|
|
dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage);
|
|
dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance);
|
|
|
|
dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num);
|
|
for (i = 0; i < nau8825->sar_threshold_num; i++)
|
|
dev_dbg(dev, "sar-threshold[%d]=%d\n", i,
|
|
nau8825->sar_threshold[i]);
|
|
|
|
dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis);
|
|
dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage);
|
|
dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time);
|
|
dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time);
|
|
dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce);
|
|
dev_dbg(dev, "jack-insert-debounce: %d\n",
|
|
nau8825->jack_insert_debounce);
|
|
dev_dbg(dev, "jack-eject-debounce: %d\n",
|
|
nau8825->jack_eject_debounce);
|
|
dev_dbg(dev, "crosstalk-enable: %d\n",
|
|
nau8825->xtalk_enable);
|
|
}
|
|
|
|
static int nau8825_read_device_properties(struct device *dev,
|
|
struct nau8825 *nau8825) {
|
|
int ret;
|
|
|
|
nau8825->jkdet_enable = device_property_read_bool(dev,
|
|
"nuvoton,jkdet-enable");
|
|
nau8825->jkdet_pull_enable = device_property_read_bool(dev,
|
|
"nuvoton,jkdet-pull-enable");
|
|
nau8825->jkdet_pull_up = device_property_read_bool(dev,
|
|
"nuvoton,jkdet-pull-up");
|
|
ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity",
|
|
&nau8825->jkdet_polarity);
|
|
if (ret)
|
|
nau8825->jkdet_polarity = 1;
|
|
ret = device_property_read_u32(dev, "nuvoton,micbias-voltage",
|
|
&nau8825->micbias_voltage);
|
|
if (ret)
|
|
nau8825->micbias_voltage = 6;
|
|
ret = device_property_read_u32(dev, "nuvoton,vref-impedance",
|
|
&nau8825->vref_impedance);
|
|
if (ret)
|
|
nau8825->vref_impedance = 2;
|
|
ret = device_property_read_u32(dev, "nuvoton,sar-threshold-num",
|
|
&nau8825->sar_threshold_num);
|
|
if (ret)
|
|
nau8825->sar_threshold_num = 4;
|
|
ret = device_property_read_u32_array(dev, "nuvoton,sar-threshold",
|
|
nau8825->sar_threshold, nau8825->sar_threshold_num);
|
|
if (ret) {
|
|
nau8825->sar_threshold[0] = 0x08;
|
|
nau8825->sar_threshold[1] = 0x12;
|
|
nau8825->sar_threshold[2] = 0x26;
|
|
nau8825->sar_threshold[3] = 0x73;
|
|
}
|
|
ret = device_property_read_u32(dev, "nuvoton,sar-hysteresis",
|
|
&nau8825->sar_hysteresis);
|
|
if (ret)
|
|
nau8825->sar_hysteresis = 0;
|
|
ret = device_property_read_u32(dev, "nuvoton,sar-voltage",
|
|
&nau8825->sar_voltage);
|
|
if (ret)
|
|
nau8825->sar_voltage = 6;
|
|
ret = device_property_read_u32(dev, "nuvoton,sar-compare-time",
|
|
&nau8825->sar_compare_time);
|
|
if (ret)
|
|
nau8825->sar_compare_time = 1;
|
|
ret = device_property_read_u32(dev, "nuvoton,sar-sampling-time",
|
|
&nau8825->sar_sampling_time);
|
|
if (ret)
|
|
nau8825->sar_sampling_time = 1;
|
|
ret = device_property_read_u32(dev, "nuvoton,short-key-debounce",
|
|
&nau8825->key_debounce);
|
|
if (ret)
|
|
nau8825->key_debounce = 3;
|
|
ret = device_property_read_u32(dev, "nuvoton,jack-insert-debounce",
|
|
&nau8825->jack_insert_debounce);
|
|
if (ret)
|
|
nau8825->jack_insert_debounce = 7;
|
|
ret = device_property_read_u32(dev, "nuvoton,jack-eject-debounce",
|
|
&nau8825->jack_eject_debounce);
|
|
if (ret)
|
|
nau8825->jack_eject_debounce = 0;
|
|
nau8825->xtalk_enable = device_property_read_bool(dev,
|
|
"nuvoton,crosstalk-enable");
|
|
|
|
nau8825->mclk = devm_clk_get(dev, "mclk");
|
|
if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
|
|
return -EPROBE_DEFER;
|
|
} else if (PTR_ERR(nau8825->mclk) == -ENOENT) {
|
|
/* The MCLK is managed externally or not used at all */
|
|
nau8825->mclk = NULL;
|
|
dev_info(dev, "No 'mclk' clock found, assume MCLK is managed externally");
|
|
} else if (IS_ERR(nau8825->mclk)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_setup_irq(struct nau8825 *nau8825)
|
|
{
|
|
int ret;
|
|
|
|
ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
|
|
nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
"nau8825", nau8825);
|
|
|
|
if (ret) {
|
|
dev_err(nau8825->dev, "Cannot request irq %d (%d)\n",
|
|
nau8825->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nau8825_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
struct nau8825 *nau8825 = dev_get_platdata(&i2c->dev);
|
|
int ret, value;
|
|
|
|
if (!nau8825) {
|
|
nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL);
|
|
if (!nau8825)
|
|
return -ENOMEM;
|
|
ret = nau8825_read_device_properties(dev, nau8825);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(i2c, nau8825);
|
|
|
|
nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config);
|
|
if (IS_ERR(nau8825->regmap))
|
|
return PTR_ERR(nau8825->regmap);
|
|
nau8825->dev = dev;
|
|
nau8825->irq = i2c->irq;
|
|
/* Initiate parameters, semaphore and work queue which are needed in
|
|
* cross talk suppression measurment function.
|
|
*/
|
|
nau8825->xtalk_state = NAU8825_XTALK_DONE;
|
|
nau8825->xtalk_protect = false;
|
|
nau8825->xtalk_baktab_initialized = false;
|
|
sema_init(&nau8825->xtalk_sem, 1);
|
|
INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work);
|
|
|
|
nau8825_print_device_properties(nau8825);
|
|
|
|
nau8825_reset_chip(nau8825->regmap);
|
|
ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read device id from the NAU8825: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
if ((value & NAU8825_SOFTWARE_ID_MASK) !=
|
|
NAU8825_SOFTWARE_ID_NAU8825) {
|
|
dev_err(dev, "Not a NAU8825 chip\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
nau8825_init_regs(nau8825);
|
|
|
|
if (i2c->irq)
|
|
nau8825_setup_irq(nau8825);
|
|
|
|
return devm_snd_soc_register_component(&i2c->dev,
|
|
&nau8825_component_driver,
|
|
&nau8825_dai, 1);
|
|
}
|
|
|
|
static int nau8825_i2c_remove(struct i2c_client *client)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id nau8825_i2c_ids[] = {
|
|
{ "nau8825", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id nau8825_of_ids[] = {
|
|
{ .compatible = "nuvoton,nau8825", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, nau8825_of_ids);
|
|
#endif
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id nau8825_acpi_match[] = {
|
|
{ "10508825", 0 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match);
|
|
#endif
|
|
|
|
static struct i2c_driver nau8825_driver = {
|
|
.driver = {
|
|
.name = "nau8825",
|
|
.of_match_table = of_match_ptr(nau8825_of_ids),
|
|
.acpi_match_table = ACPI_PTR(nau8825_acpi_match),
|
|
},
|
|
.probe = nau8825_i2c_probe,
|
|
.remove = nau8825_i2c_remove,
|
|
.id_table = nau8825_i2c_ids,
|
|
};
|
|
module_i2c_driver(nau8825_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC nau8825 driver");
|
|
MODULE_AUTHOR("Anatol Pomozov <anatol@chromium.org>");
|
|
MODULE_LICENSE("GPL");
|