linux/drivers/usb
Dinh Nguyen 112fe8e290 usb: dwc2: Add function to calculate correct FIFO sizes
The dwc2 IP on the SOCFPGA cannot use the default HW configured
FIFO sizes. The total FIFO depth as read from GHWCFG3 reports 0x1f80 or 8064
32-bit words. But the GRXFSIZ, GNPTXFSIZ, and HPTXFSIZ register defaults
to 0x2000 or 8192 32-bit words. So the driver cannot just use the fifo sizes
as read from those registers.

For platforms that face the same issue, this commits sets the RX, periodic TX,
and non-periodic TX fifo size to those that are recommended v2.93a spec for
the DWC2 IP. Implements Method #2 from the Synopsys v2.93a spec for the DWC2.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 15:42:42 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: udc: update gadget states according to ch9 2014-05-23 11:36:44 +09:00
class USB: cdc-acm: use tty-port dtr_rts 2014-05-27 15:04:10 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
dwc2 usb: dwc2: Add function to calculate correct FIFO sizes 2014-05-27 15:42:42 -07:00
dwc3 usb: patches for v3.16 merge window 2014-05-23 11:28:21 +09:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget usb: patches for v3.16 merge window 2014-05-23 11:28:21 +09:00
host usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers 2014-05-27 15:40:40 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: iowarrior: Convert local dbg macro to dev_dbg 2014-05-27 15:00:22 -07:00
mon
musb usb: patches for v3.16 merge window 2014-05-23 11:28:21 +09:00
phy usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
renesas_usbhs usb: changes for v3.14 merge window 2014-01-03 12:15:10 -08:00
serial USB: keyspan: fix potential null pointer dereference 2014-05-27 15:14:13 -07:00
storage USB: Nokia 5300 should be treated as unusual dev 2014-05-03 19:41:07 -04:00
wusbcore USB: wusbcore: fix control-pipe directions 2014-05-27 15:04:10 -07:00
Kconfig usb: host: remove USB_ARCH_HAS_?HCI 2014-02-18 12:36:38 -08:00
Makefile usb: move usb/usb-common.c to usb/common/usb-common.c 2014-05-27 15:29:44 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.