linux/drivers/net/ethernet/intel/i40e
Shannon Nelson 0f52958b2c i40e: init NVM update state on adminq init
The adminq init is run after the EMPR that is triggered by the
NVM update.  The final write command will cause the reset and
will want to wait for the ARQ event that signals the end of the
update, but the reset precludes the event being sent.  The state
is probably already at INIT, but we set it so here anyway, and
clear the release_on_done flag as well.

Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Michal Kosiarz <michal.kosiarz@intel.com>
Acked-by: Kamil Krawczyk <kamil.krawczyk@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09 12:57:03 -08:00
..
i40e_adminq_cmd.h i40e: Add support to firmware CEE DCBX mode 2014-11-18 01:09:02 -08:00
i40e_adminq.c i40e: init NVM update state on adminq init 2014-12-09 12:57:03 -08:00
i40e_adminq.h i40e: add range check to i40e_aq_rc_to_posix 2014-12-09 12:57:02 -08:00
i40e_alloc.h i40e: Fix GPL header 2014-01-09 02:10:23 -08:00
i40e_common.c i40e: get pf_id from HW rather than PCI function 2014-12-06 04:46:45 -08:00
i40e_dcb_nl.c i40e: Add support to firmware CEE DCBX mode 2014-11-18 01:09:02 -08:00
i40e_dcb.c i40e: Check for LLDP AdminStatus before querying DCBX 2014-11-18 01:09:06 -08:00
i40e_dcb.h i40e: Add support to firmware CEE DCBX mode 2014-11-18 01:09:02 -08:00
i40e_debugfs.c i40e: Reduce stack in i40e_dbg_dump_desc 2014-12-06 05:00:01 -08:00
i40e_diag.c i40e: Rework register diagnostic 2014-06-05 01:27:46 -07:00
i40e_diag.h i40e: Fix GPL header 2014-01-09 02:10:23 -08:00
i40e_ethtool.c i40e: better error messages for NVM update issues 2014-12-09 12:57:01 -08:00
i40e_fcoe.c i40e: Add support to firmware CEE DCBX mode 2014-11-18 01:09:02 -08:00
i40e_fcoe.h i40e: adds FCoE code to the i40e driver 2014-08-02 19:41:13 -07:00
i40e_hmc.c i40e/i40evf: Fix code to accommodate i40e_register.h changes 2014-06-08 02:01:23 -07:00
i40e_hmc.h i40e/i40evf: Force a shifted '1' to be unsigned 2014-07-02 19:02:19 -07:00
i40e_lan_hmc.c i40e: remove unnecessary break after goto 2014-07-13 23:45:24 -07:00
i40e_lan_hmc.h i40e/i40evf: Big endian fixes for handling HMC 2014-06-26 04:44:57 -07:00
i40e_main.c i40e: Bump i40e version to 1.2.2 and i40evf version to 1.0.6 2014-12-06 04:53:03 -08:00
i40e_nvm.c i40e: rework debug messages for NVM update 2014-12-09 12:57:02 -08:00
i40e_osdep.h i40e: Adds FCoE related code to i40e core driver 2014-08-02 19:41:13 -07:00
i40e_prototype.h i40e: Check for LLDP AdminStatus before querying DCBX 2014-11-18 01:09:06 -08:00
i40e_ptp.c i40e: don't enable PTP support on more than one PF per port 2014-12-06 03:47:15 -08:00
i40e_register.h i40e/i40evf: i40e_register.h update 2014-06-19 20:22:02 -07:00
i40e_status.h i40e: Fix GPL header 2014-01-09 02:10:23 -08:00
i40e_txrx.c ethernet/intel: Use eth_skb_pad and skb_put_padto helpers 2014-12-08 20:47:42 -05:00
i40e_txrx.h i40e: clean up throttle rate code 2014-11-11 06:01:48 -08:00
i40e_type.h i40e: Define and use i40e_is_vf macro 2014-12-06 04:00:24 -08:00
i40e_virtchnl_pf.c i40e: Add new update VSI flow to accommodate FW fix with VSI Loopback mode 2014-12-06 04:26:33 -08:00
i40e_virtchnl_pf.h i40e: Add new update VSI flow to accommodate FW fix with VSI Loopback mode 2014-12-06 04:26:33 -08:00
i40e_virtchnl.h i40e: Add a virtual channel op to config RSS 2014-12-06 03:53:48 -08:00
i40e.h i40e: increase ARQ size 2014-12-06 04:39:30 -08:00
Makefile i40e: adds FCoE to build and updates its documentation 2014-08-02 19:41:13 -07:00