forked from Minki/linux
0dbfe8ddaa
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
582 lines
14 KiB
C
582 lines
14 KiB
C
/*
|
|
* Generic Macintosh NCR5380 driver
|
|
*
|
|
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
|
|
*
|
|
* derived in part from:
|
|
*/
|
|
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995, Russell King
|
|
*
|
|
* ALPHA RELEASE 1.
|
|
*
|
|
* For more information, please consult
|
|
*
|
|
* NCR 5380 Family
|
|
* SCSI Protocol Controller
|
|
* Databook
|
|
*
|
|
* NCR Microelectronics
|
|
* 1635 Aeroplaza Drive
|
|
* Colorado Springs, CO 80916
|
|
* 1+ (719) 578-3400
|
|
* 1+ (800) 334-5454
|
|
*/
|
|
|
|
/*
|
|
* $Log: mac_NCR5380.c,v $
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/macintosh.h>
|
|
#include <asm/macints.h>
|
|
#include <asm/mac_via.h>
|
|
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "mac_scsi.h"
|
|
|
|
/* These control the behaviour of the generic 5380 core */
|
|
#define AUTOSENSE
|
|
#define PSEUDO_DMA
|
|
|
|
#include "NCR5380.h"
|
|
|
|
#if 0
|
|
#define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION)
|
|
#else
|
|
#define NDEBUG (NDEBUG_ABORT)
|
|
#endif
|
|
|
|
#define RESET_BOOT
|
|
#define DRIVER_SETUP
|
|
|
|
extern void via_scsi_clear(void);
|
|
|
|
#ifdef RESET_BOOT
|
|
static void mac_scsi_reset_boot(struct Scsi_Host *instance);
|
|
#endif
|
|
|
|
static int setup_called = 0;
|
|
static int setup_can_queue = -1;
|
|
static int setup_cmd_per_lun = -1;
|
|
static int setup_sg_tablesize = -1;
|
|
static int setup_use_pdma = -1;
|
|
#ifdef SUPPORT_TAGS
|
|
static int setup_use_tagged_queuing = -1;
|
|
#endif
|
|
static int setup_hostid = -1;
|
|
|
|
/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
|
|
* we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
|
|
* need ten times the standard value... */
|
|
#define TOSHIBA_DELAY
|
|
|
|
#ifdef TOSHIBA_DELAY
|
|
#define AFTER_RESET_DELAY (5*HZ/2)
|
|
#else
|
|
#define AFTER_RESET_DELAY (HZ/2)
|
|
#endif
|
|
|
|
static volatile unsigned char *mac_scsi_regp = NULL;
|
|
static volatile unsigned char *mac_scsi_drq = NULL;
|
|
static volatile unsigned char *mac_scsi_nodrq = NULL;
|
|
|
|
|
|
/*
|
|
* NCR 5380 register access functions
|
|
*/
|
|
|
|
#if 0
|
|
/* Debug versions */
|
|
#define CTRL(p,v) (*ctrl = (v))
|
|
|
|
static char macscsi_read(struct Scsi_Host *instance, int reg)
|
|
{
|
|
int iobase = instance->io_port;
|
|
int i;
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
|
|
CTRL(iobase, 0);
|
|
i = in_8(iobase + (reg<<4));
|
|
CTRL(iobase, 0x40);
|
|
|
|
return i;
|
|
}
|
|
|
|
static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
|
|
{
|
|
int iobase = instance->io_port;
|
|
int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
|
|
|
|
CTRL(iobase, 0);
|
|
out_8(iobase + (reg<<4), value);
|
|
CTRL(iobase, 0x40);
|
|
}
|
|
#else
|
|
|
|
/* Fast versions */
|
|
static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
|
|
{
|
|
return in_8(instance->io_port + (reg<<4));
|
|
}
|
|
|
|
static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value)
|
|
{
|
|
out_8(instance->io_port + (reg<<4), value);
|
|
}
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Function : mac_scsi_setup(char *str)
|
|
*
|
|
* Purpose : booter command line initialization of the overrides array,
|
|
*
|
|
* Inputs : str - comma delimited list of options
|
|
*
|
|
*/
|
|
|
|
static int __init mac_scsi_setup(char *str) {
|
|
#ifdef DRIVER_SETUP
|
|
int ints[7];
|
|
|
|
(void)get_options( str, ARRAY_SIZE(ints), ints);
|
|
|
|
if (setup_called++ || ints[0] < 1 || ints[0] > 6) {
|
|
printk(KERN_WARNING "scsi: <mac5380>"
|
|
" Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n");
|
|
printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n");
|
|
return 0;
|
|
}
|
|
|
|
if (ints[0] >= 1) {
|
|
if (ints[1] > 0)
|
|
/* no limits on this, just > 0 */
|
|
setup_can_queue = ints[1];
|
|
}
|
|
if (ints[0] >= 2) {
|
|
if (ints[2] > 0)
|
|
setup_cmd_per_lun = ints[2];
|
|
}
|
|
if (ints[0] >= 3) {
|
|
if (ints[3] >= 0) {
|
|
setup_sg_tablesize = ints[3];
|
|
/* Must be <= SG_ALL (255) */
|
|
if (setup_sg_tablesize > SG_ALL)
|
|
setup_sg_tablesize = SG_ALL;
|
|
}
|
|
}
|
|
if (ints[0] >= 4) {
|
|
/* Must be between 0 and 7 */
|
|
if (ints[4] >= 0 && ints[4] <= 7)
|
|
setup_hostid = ints[4];
|
|
else if (ints[4] > 7)
|
|
printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] );
|
|
}
|
|
#ifdef SUPPORT_TAGS
|
|
if (ints[0] >= 5) {
|
|
if (ints[5] >= 0)
|
|
setup_use_tagged_queuing = !!ints[5];
|
|
}
|
|
|
|
if (ints[0] == 6) {
|
|
if (ints[6] >= 0)
|
|
setup_use_pdma = ints[6];
|
|
}
|
|
#else
|
|
if (ints[0] == 5) {
|
|
if (ints[5] >= 0)
|
|
setup_use_pdma = ints[5];
|
|
}
|
|
#endif /* SUPPORT_TAGS */
|
|
|
|
#endif /* DRIVER_SETUP */
|
|
return 1;
|
|
}
|
|
|
|
__setup("mac5380=", mac_scsi_setup);
|
|
|
|
/*
|
|
* Function : int macscsi_detect(struct scsi_host_template * tpnt)
|
|
*
|
|
* Purpose : initializes mac NCR5380 driver based on the
|
|
* command line / compile time port and irq definitions.
|
|
*
|
|
* Inputs : tpnt - template for this SCSI adapter.
|
|
*
|
|
* Returns : 1 if a host adapter was found, 0 if not.
|
|
*
|
|
*/
|
|
|
|
int __init macscsi_detect(struct scsi_host_template * tpnt)
|
|
{
|
|
static int called = 0;
|
|
int flags = 0;
|
|
struct Scsi_Host *instance;
|
|
|
|
if (!MACH_IS_MAC || called)
|
|
return( 0 );
|
|
|
|
if (macintosh_config->scsi_type != MAC_SCSI_OLD)
|
|
return( 0 );
|
|
|
|
/* setup variables */
|
|
tpnt->can_queue =
|
|
(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
|
|
tpnt->cmd_per_lun =
|
|
(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
|
|
tpnt->sg_tablesize =
|
|
(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
|
|
|
|
if (setup_hostid >= 0)
|
|
tpnt->this_id = setup_hostid;
|
|
else {
|
|
/* use 7 as default */
|
|
tpnt->this_id = 7;
|
|
}
|
|
|
|
#ifdef SUPPORT_TAGS
|
|
if (setup_use_tagged_queuing < 0)
|
|
setup_use_tagged_queuing = USE_TAGGED_QUEUING;
|
|
#endif
|
|
|
|
/* Once we support multiple 5380s (e.g. DuoDock) we'll do
|
|
something different here */
|
|
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
|
|
|
|
if (macintosh_config->ident == MAC_MODEL_IIFX) {
|
|
mac_scsi_regp = via1+0x8000;
|
|
mac_scsi_drq = via1+0xE000;
|
|
mac_scsi_nodrq = via1+0xC000;
|
|
/* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */
|
|
flags = FLAG_NO_PSEUDO_DMA;
|
|
} else {
|
|
mac_scsi_regp = via1+0x10000;
|
|
mac_scsi_drq = via1+0x6000;
|
|
mac_scsi_nodrq = via1+0x12000;
|
|
}
|
|
|
|
if (! setup_use_pdma)
|
|
flags = FLAG_NO_PSEUDO_DMA;
|
|
|
|
instance->io_port = (unsigned long) mac_scsi_regp;
|
|
instance->irq = IRQ_MAC_SCSI;
|
|
|
|
#ifdef RESET_BOOT
|
|
mac_scsi_reset_boot(instance);
|
|
#endif
|
|
|
|
NCR5380_init(instance, flags);
|
|
|
|
instance->n_io_port = 255;
|
|
|
|
((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
|
|
|
|
if (instance->irq != SCSI_IRQ_NONE)
|
|
if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
|
|
printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
|
|
instance->host_no, instance->irq);
|
|
instance->irq = SCSI_IRQ_NONE;
|
|
}
|
|
|
|
printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
|
|
if (instance->irq == SCSI_IRQ_NONE)
|
|
printk (KERN_INFO "s disabled");
|
|
else
|
|
printk (KERN_INFO " %d", instance->irq);
|
|
printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
|
|
instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
|
|
printk(KERN_INFO "\nscsi%d:", instance->host_no);
|
|
NCR5380_print_options(instance);
|
|
printk("\n");
|
|
called = 1;
|
|
return 1;
|
|
}
|
|
|
|
int macscsi_release (struct Scsi_Host *shpnt)
|
|
{
|
|
if (shpnt->irq != SCSI_IRQ_NONE)
|
|
free_irq(shpnt->irq, shpnt);
|
|
NCR5380_exit(shpnt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef RESET_BOOT
|
|
/*
|
|
* Our 'bus reset on boot' function
|
|
*/
|
|
|
|
static void mac_scsi_reset_boot(struct Scsi_Host *instance)
|
|
{
|
|
unsigned long end;
|
|
|
|
NCR5380_local_declare();
|
|
NCR5380_setup(instance);
|
|
|
|
/*
|
|
* Do a SCSI reset to clean up the bus during initialization. No messing
|
|
* with the queues, interrupts, or locks necessary here.
|
|
*/
|
|
|
|
printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
|
|
|
|
/* get in phase */
|
|
NCR5380_write( TARGET_COMMAND_REG,
|
|
PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
|
|
|
|
/* assert RST */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
|
|
/* The min. reset hold time is 25us, so 40us should be enough */
|
|
udelay( 50 );
|
|
/* reset RST and interrupt */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
|
|
NCR5380_read( RESET_PARITY_INTERRUPT_REG );
|
|
|
|
for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
|
|
barrier();
|
|
|
|
printk(KERN_INFO " done\n" );
|
|
}
|
|
#endif
|
|
|
|
const char * macscsi_info (struct Scsi_Host *spnt) {
|
|
return "";
|
|
}
|
|
|
|
/*
|
|
Pseudo-DMA: (Ove Edlund)
|
|
The code attempts to catch bus errors that occur if one for example
|
|
"trips over the cable".
|
|
XXX: Since bus errors in the PDMA routines never happen on my
|
|
computer, the bus error code is untested.
|
|
If the code works as intended, a bus error results in Pseudo-DMA
|
|
beeing disabled, meaning that the driver switches to slow handshake.
|
|
If bus errors are NOT extremely rare, this has to be changed.
|
|
*/
|
|
|
|
#define CP_IO_TO_MEM(s,d,len) \
|
|
__asm__ __volatile__ \
|
|
(" cmp.w #4,%2\n" \
|
|
" bls 8f\n" \
|
|
" move.w %1,%%d0\n" \
|
|
" neg.b %%d0\n" \
|
|
" and.w #3,%%d0\n" \
|
|
" sub.w %%d0,%2\n" \
|
|
" bra 2f\n" \
|
|
" 1: move.b (%0),(%1)+\n" \
|
|
" 2: dbf %%d0,1b\n" \
|
|
" move.w %2,%%d0\n" \
|
|
" lsr.w #5,%%d0\n" \
|
|
" bra 4f\n" \
|
|
" 3: move.l (%0),(%1)+\n" \
|
|
"31: move.l (%0),(%1)+\n" \
|
|
"32: move.l (%0),(%1)+\n" \
|
|
"33: move.l (%0),(%1)+\n" \
|
|
"34: move.l (%0),(%1)+\n" \
|
|
"35: move.l (%0),(%1)+\n" \
|
|
"36: move.l (%0),(%1)+\n" \
|
|
"37: move.l (%0),(%1)+\n" \
|
|
" 4: dbf %%d0,3b\n" \
|
|
" move.w %2,%%d0\n" \
|
|
" lsr.w #2,%%d0\n" \
|
|
" and.w #7,%%d0\n" \
|
|
" bra 6f\n" \
|
|
" 5: move.l (%0),(%1)+\n" \
|
|
" 6: dbf %%d0,5b\n" \
|
|
" and.w #3,%2\n" \
|
|
" bra 8f\n" \
|
|
" 7: move.b (%0),(%1)+\n" \
|
|
" 8: dbf %2,7b\n" \
|
|
" moveq.l #0, %2\n" \
|
|
" 9: \n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
" .even\n" \
|
|
"90: moveq.l #1, %2\n" \
|
|
" jra 9b\n" \
|
|
".previous\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
" .align 4\n" \
|
|
" .long 1b,90b\n" \
|
|
" .long 3b,90b\n" \
|
|
" .long 31b,90b\n" \
|
|
" .long 32b,90b\n" \
|
|
" .long 33b,90b\n" \
|
|
" .long 34b,90b\n" \
|
|
" .long 35b,90b\n" \
|
|
" .long 36b,90b\n" \
|
|
" .long 37b,90b\n" \
|
|
" .long 5b,90b\n" \
|
|
" .long 7b,90b\n" \
|
|
".previous" \
|
|
: "=a"(s), "=a"(d), "=d"(len) \
|
|
: "0"(s), "1"(d), "2"(len) \
|
|
: "d0")
|
|
|
|
|
|
static int macscsi_pread (struct Scsi_Host *instance,
|
|
unsigned char *dst, int len)
|
|
{
|
|
unsigned char *d;
|
|
volatile unsigned char *s;
|
|
|
|
NCR5380_local_declare();
|
|
NCR5380_setup(instance);
|
|
|
|
s = mac_scsi_drq+0x60;
|
|
d = dst;
|
|
|
|
/* These conditions are derived from MacOS */
|
|
|
|
while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
|
|
&& !(NCR5380_read(STATUS_REG) & SR_REQ))
|
|
;
|
|
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
|
|
&& (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
|
|
printk(KERN_ERR "Error in macscsi_pread\n");
|
|
return -1;
|
|
}
|
|
|
|
CP_IO_TO_MEM(s, d, len);
|
|
|
|
if (len != 0) {
|
|
printk(KERN_NOTICE "Bus error in macscsi_pread\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#define CP_MEM_TO_IO(s,d,len) \
|
|
__asm__ __volatile__ \
|
|
(" cmp.w #4,%2\n" \
|
|
" bls 8f\n" \
|
|
" move.w %0,%%d0\n" \
|
|
" neg.b %%d0\n" \
|
|
" and.w #3,%%d0\n" \
|
|
" sub.w %%d0,%2\n" \
|
|
" bra 2f\n" \
|
|
" 1: move.b (%0)+,(%1)\n" \
|
|
" 2: dbf %%d0,1b\n" \
|
|
" move.w %2,%%d0\n" \
|
|
" lsr.w #5,%%d0\n" \
|
|
" bra 4f\n" \
|
|
" 3: move.l (%0)+,(%1)\n" \
|
|
"31: move.l (%0)+,(%1)\n" \
|
|
"32: move.l (%0)+,(%1)\n" \
|
|
"33: move.l (%0)+,(%1)\n" \
|
|
"34: move.l (%0)+,(%1)\n" \
|
|
"35: move.l (%0)+,(%1)\n" \
|
|
"36: move.l (%0)+,(%1)\n" \
|
|
"37: move.l (%0)+,(%1)\n" \
|
|
" 4: dbf %%d0,3b\n" \
|
|
" move.w %2,%%d0\n" \
|
|
" lsr.w #2,%%d0\n" \
|
|
" and.w #7,%%d0\n" \
|
|
" bra 6f\n" \
|
|
" 5: move.l (%0)+,(%1)\n" \
|
|
" 6: dbf %%d0,5b\n" \
|
|
" and.w #3,%2\n" \
|
|
" bra 8f\n" \
|
|
" 7: move.b (%0)+,(%1)\n" \
|
|
" 8: dbf %2,7b\n" \
|
|
" moveq.l #0, %2\n" \
|
|
" 9: \n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
" .even\n" \
|
|
"90: moveq.l #1, %2\n" \
|
|
" jra 9b\n" \
|
|
".previous\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
" .align 4\n" \
|
|
" .long 1b,90b\n" \
|
|
" .long 3b,90b\n" \
|
|
" .long 31b,90b\n" \
|
|
" .long 32b,90b\n" \
|
|
" .long 33b,90b\n" \
|
|
" .long 34b,90b\n" \
|
|
" .long 35b,90b\n" \
|
|
" .long 36b,90b\n" \
|
|
" .long 37b,90b\n" \
|
|
" .long 5b,90b\n" \
|
|
" .long 7b,90b\n" \
|
|
".previous" \
|
|
: "=a"(s), "=a"(d), "=d"(len) \
|
|
: "0"(s), "1"(d), "2"(len) \
|
|
: "d0")
|
|
|
|
static int macscsi_pwrite (struct Scsi_Host *instance,
|
|
unsigned char *src, int len)
|
|
{
|
|
unsigned char *s;
|
|
volatile unsigned char *d;
|
|
|
|
NCR5380_local_declare();
|
|
NCR5380_setup(instance);
|
|
|
|
s = src;
|
|
d = mac_scsi_drq;
|
|
|
|
/* These conditions are derived from MacOS */
|
|
|
|
while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
|
|
&& (!(NCR5380_read(STATUS_REG) & SR_REQ)
|
|
|| (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
|
|
;
|
|
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
|
|
printk(KERN_ERR "Error in macscsi_pwrite\n");
|
|
return -1;
|
|
}
|
|
|
|
CP_MEM_TO_IO(s, d, len);
|
|
|
|
if (len != 0) {
|
|
printk(KERN_NOTICE "Bus error in macscsi_pwrite\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#include "NCR5380.c"
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.proc_name = "Mac5380",
|
|
.proc_info = macscsi_proc_info,
|
|
.name = "Macintosh NCR5380 SCSI",
|
|
.detect = macscsi_detect,
|
|
.release = macscsi_release,
|
|
.info = macscsi_info,
|
|
.queuecommand = macscsi_queue_command,
|
|
.eh_abort_handler = macscsi_abort,
|
|
.eh_bus_reset_handler = macscsi_bus_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.use_clustering = DISABLE_CLUSTERING
|
|
};
|
|
|
|
|
|
#include "scsi_module.c"
|