linux/arch/m68k/mac/macints.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

761 lines
18 KiB
C

/*
* Macintosh interrupts
*
* General design:
* In contrary to the Amiga and Atari platforms, the Mac hardware seems to
* exclusively use the autovector interrupts (the 'generic level0-level7'
* interrupts with exception vectors 0x19-0x1f). The following interrupt levels
* are used:
* 1 - VIA1
* - slot 0: one second interrupt (CA2)
* - slot 1: VBlank (CA1)
* - slot 2: ADB data ready (SR full)
* - slot 3: ADB data (CB2)
* - slot 4: ADB clock (CB1)
* - slot 5: timer 2
* - slot 6: timer 1
* - slot 7: status of IRQ; signals 'any enabled int.'
*
* 2 - VIA2 or RBV
* - slot 0: SCSI DRQ (CA2)
* - slot 1: NUBUS IRQ (CA1) need to read port A to find which
* - slot 2: /EXP IRQ (only on IIci)
* - slot 3: SCSI IRQ (CB2)
* - slot 4: ASC IRQ (CB1)
* - slot 5: timer 2 (not on IIci)
* - slot 6: timer 1 (not on IIci)
* - slot 7: status of IRQ; signals 'any enabled int.'
*
* 2 - OSS (IIfx only?)
* - slot 0: SCSI interrupt
* - slot 1: Sound interrupt
*
* Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
*
* 3 - unused (?)
*
* 4 - SCC (slot number determined by reading RR3 on the SSC itself)
* - slot 1: SCC channel A
* - slot 2: SCC channel B
*
* 5 - unused (?)
* [serial errors or special conditions seem to raise level 6
* interrupts on some models (LC4xx?)]
*
* 6 - off switch (?)
*
* For OSS Macintoshes (IIfx only at this point):
*
* 3 - Nubus interrupt
* - slot 0: Slot $9
* - slot 1: Slot $A
* - slot 2: Slot $B
* - slot 3: Slot $C
* - slot 4: Slot $D
* - slot 5: Slot $E
*
* 4 - SCC IOP
* - slot 1: SCC channel A
* - slot 2: SCC channel B
*
* 5 - ISM IOP (ADB?)
*
* 6 - unused
*
* For PSC Macintoshes (660AV, 840AV):
*
* 3 - PSC level 3
* - slot 0: MACE
*
* 4 - PSC level 4
* - slot 1: SCC channel A interrupt
* - slot 2: SCC channel B interrupt
* - slot 3: MACE DMA
*
* 5 - PSC level 5
*
* 6 - PSC level 6
*
* Finally we have good 'ole level 7, the non-maskable interrupt:
*
* 7 - NMI (programmer's switch on the back of some Macs)
* Also RAM parity error on models which support it (IIc, IIfx?)
*
* The current interrupt logic looks something like this:
*
* - We install dispatchers for the autovector interrupts (1-7). These
* dispatchers are responsible for querying the hardware (the
* VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
* this information a machspec interrupt number is generated by placing the
* index of the interrupt hardware into the low three bits and the original
* autovector interrupt number in the upper 5 bits. The handlers for the
* resulting machspec interrupt are then called.
*
* - Nubus is a special case because its interrupts are hidden behind two
* layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
* which translates to IRQ number 17. In this spot we install _another_
* dispatcher. This dispatcher finds the interrupting slot number (9-F) and
* then forms a new machspec interrupt number as above with the slot number
* minus 9 in the low three bits and the pseudo-level 7 in the upper five
* bits. The handlers for this new machspec interrupt number are then
* called. This puts Nubus interrupts into the range 56-62.
*
* - The Baboon interrupts (used on some PowerBooks) are an even more special
* case. They're hidden behind the Nubus slot $C interrupt thus adding a
* third layer of indirection. Why oh why did the Apple engineers do that?
*
* - We support "fast" and "slow" handlers, just like the Amiga port. The
* fast handlers are called first and with all interrupts disabled. They
* are expected to execute quickly (hence the name). The slow handlers are
* called last with interrupts enabled and the interrupt level restored.
* They must therefore be reentrant.
*
* TODO:
*
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h> /* for intr_count */
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/bootinfo.h>
#include <asm/machw.h>
#include <asm/macintosh.h>
#include <asm/mac_via.h>
#include <asm/mac_psc.h>
#include <asm/hwtest.h>
#include <asm/errno.h>
#include <asm/macints.h>
#define DEBUG_SPURIOUS
#define SHUTUP_SONIC
/*
* The mac_irq_list array is an array of linked lists of irq_node_t nodes.
* Each node contains one handler to be called whenever the interrupt
* occurs, with fast handlers listed before slow handlers.
*/
irq_node_t *mac_irq_list[NUM_MAC_SOURCES];
/* SCC interrupt mask */
static int scc_mask;
/*
* VIA/RBV hooks
*/
extern void via_init(void);
extern void via_register_interrupts(void);
extern void via_irq_enable(int);
extern void via_irq_disable(int);
extern void via_irq_clear(int);
extern int via_irq_pending(int);
/*
* OSS hooks
*/
extern int oss_present;
extern void oss_init(void);
extern void oss_register_interrupts(void);
extern void oss_irq_enable(int);
extern void oss_irq_disable(int);
extern void oss_irq_clear(int);
extern int oss_irq_pending(int);
/*
* PSC hooks
*/
extern int psc_present;
extern void psc_init(void);
extern void psc_register_interrupts(void);
extern void psc_irq_enable(int);
extern void psc_irq_disable(int);
extern void psc_irq_clear(int);
extern int psc_irq_pending(int);
/*
* IOP hooks
*/
extern void iop_register_interrupts(void);
/*
* Baboon hooks
*/
extern int baboon_present;
extern void baboon_init(void);
extern void baboon_register_interrupts(void);
extern void baboon_irq_enable(int);
extern void baboon_irq_disable(int);
extern void baboon_irq_clear(int);
extern int baboon_irq_pending(int);
/*
* SCC interrupt routines
*/
static void scc_irq_enable(int);
static void scc_irq_disable(int);
/*
* console_loglevel determines NMI handler function
*/
extern irqreturn_t mac_bang(int, void *, struct pt_regs *);
irqreturn_t mac_nmi_handler(int, void *, struct pt_regs *);
irqreturn_t mac_debug_handler(int, void *, struct pt_regs *);
/* #define DEBUG_MACINTS */
void mac_init_IRQ(void)
{
int i;
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Setting things up...\n");
#endif
/* Initialize the IRQ handler lists. Initially each list is empty, */
for (i = 0; i < NUM_MAC_SOURCES; i++) {
mac_irq_list[i] = NULL;
}
scc_mask = 0;
/* Make sure the SONIC interrupt is cleared or things get ugly */
#ifdef SHUTUP_SONIC
printk("Killing onboard sonic... ");
/* This address should hopefully be mapped already */
if (hwreg_present((void*)(0x50f0a000))) {
*(long *)(0x50f0a014) = 0x7fffL;
*(long *)(0x50f0a010) = 0L;
}
printk("Done.\n");
#endif /* SHUTUP_SONIC */
/*
* Now register the handlers for the master IRQ handlers
* at levels 1-7. Most of the work is done elsewhere.
*/
if (oss_present) {
oss_register_interrupts();
} else {
via_register_interrupts();
}
if (psc_present) psc_register_interrupts();
if (baboon_present) baboon_register_interrupts();
iop_register_interrupts();
cpu_request_irq(7, mac_nmi_handler, IRQ_FLG_LOCK, "NMI",
mac_nmi_handler);
#ifdef DEBUG_MACINTS
printk("mac_init_IRQ(): Done!\n");
#endif
}
/*
* Routines to work with irq_node_t's on linked lists lifted from
* the Amiga code written by Roman Zippel.
*/
static inline void mac_insert_irq(irq_node_t **list, irq_node_t *node)
{
unsigned long flags;
irq_node_t *cur;
if (!node->dev_id)
printk("%s: Warning: dev_id of %s is zero\n",
__FUNCTION__, node->devname);
local_irq_save(flags);
cur = *list;
if (node->flags & IRQ_FLG_FAST) {
node->flags &= ~IRQ_FLG_SLOW;
while (cur && cur->flags & IRQ_FLG_FAST) {
list = &cur->next;
cur = cur->next;
}
} else if (node->flags & IRQ_FLG_SLOW) {
while (cur) {
list = &cur->next;
cur = cur->next;
}
} else {
while (cur && !(cur->flags & IRQ_FLG_SLOW)) {
list = &cur->next;
cur = cur->next;
}
}
node->next = cur;
*list = node;
local_irq_restore(flags);
}
static inline void mac_delete_irq(irq_node_t **list, void *dev_id)
{
unsigned long flags;
irq_node_t *node;
local_irq_save(flags);
for (node = *list; node; list = &node->next, node = *list) {
if (node->dev_id == dev_id) {
*list = node->next;
/* Mark it as free. */
node->handler = NULL;
local_irq_restore(flags);
return;
}
}
local_irq_restore(flags);
printk ("%s: tried to remove invalid irq\n", __FUNCTION__);
}
/*
* Call all the handlers for a given interrupt. Fast handlers are called
* first followed by slow handlers.
*
* This code taken from the original Amiga code written by Roman Zippel.
*/
void mac_do_irq_list(int irq, struct pt_regs *fp)
{
irq_node_t *node, *slow_nodes;
unsigned long flags;
kstat_cpu(0).irqs[irq]++;
#ifdef DEBUG_SPURIOUS
if (!mac_irq_list[irq] && (console_loglevel > 7)) {
printk("mac_do_irq_list: spurious interrupt %d!\n", irq);
return;
}
#endif
/* serve first fast and normal handlers */
for (node = mac_irq_list[irq];
node && (!(node->flags & IRQ_FLG_SLOW));
node = node->next)
node->handler(irq, node->dev_id, fp);
if (!node) return;
local_save_flags(flags);
local_irq_restore((flags & ~0x0700) | (fp->sr & 0x0700));
/* if slow handlers exists, serve them now */
slow_nodes = node;
for (; node; node = node->next) {
node->handler(irq, node->dev_id, fp);
}
}
/*
* mac_enable_irq - enable an interrupt source
* mac_disable_irq - disable an interrupt source
* mac_clear_irq - clears a pending interrupt
* mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
*
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
void mac_enable_irq (unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
case 1: via_irq_enable(irq);
break;
case 2:
case 7: if (oss_present) {
oss_irq_enable(irq);
} else {
via_irq_enable(irq);
}
break;
case 3:
case 4:
case 5:
case 6: if (psc_present) {
psc_irq_enable(irq);
} else if (oss_present) {
oss_irq_enable(irq);
} else if (irq_src == 4) {
scc_irq_enable(irq);
}
break;
case 8: if (baboon_present) {
baboon_irq_enable(irq);
}
break;
}
}
void mac_disable_irq (unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
switch(irq_src) {
case 1: via_irq_disable(irq);
break;
case 2:
case 7: if (oss_present) {
oss_irq_disable(irq);
} else {
via_irq_disable(irq);
}
break;
case 3:
case 4:
case 5:
case 6: if (psc_present) {
psc_irq_disable(irq);
} else if (oss_present) {
oss_irq_disable(irq);
} else if (irq_src == 4) {
scc_irq_disable(irq);
}
break;
case 8: if (baboon_present) {
baboon_irq_disable(irq);
}
break;
}
}
void mac_clear_irq( unsigned int irq )
{
switch(IRQ_SRC(irq)) {
case 1: via_irq_clear(irq);
break;
case 2:
case 7: if (oss_present) {
oss_irq_clear(irq);
} else {
via_irq_clear(irq);
}
break;
case 3:
case 4:
case 5:
case 6: if (psc_present) {
psc_irq_clear(irq);
} else if (oss_present) {
oss_irq_clear(irq);
}
break;
case 8: if (baboon_present) {
baboon_irq_clear(irq);
}
break;
}
}
int mac_irq_pending( unsigned int irq )
{
switch(IRQ_SRC(irq)) {
case 1: return via_irq_pending(irq);
case 2:
case 7: if (oss_present) {
return oss_irq_pending(irq);
} else {
return via_irq_pending(irq);
}
case 3:
case 4:
case 5:
case 6: if (psc_present) {
return psc_irq_pending(irq);
} else if (oss_present) {
return oss_irq_pending(irq);
}
}
return 0;
}
/*
* Add an interrupt service routine to an interrupt source.
* Returns 0 on success.
*
* FIXME: You can register interrupts on nonexistent source (ie PSC4 on a
* non-PSC machine). We should return -EINVAL in those cases.
*/
int mac_request_irq(unsigned int irq,
irqreturn_t (*handler)(int, void *, struct pt_regs *),
unsigned long flags, const char *devname, void *dev_id)
{
irq_node_t *node;
#ifdef DEBUG_MACINTS
printk ("%s: irq %d requested for %s\n", __FUNCTION__, irq, devname);
#endif
if (irq < VIA1_SOURCE_BASE) {
return cpu_request_irq(irq, handler, flags, devname, dev_id);
}
if (irq >= NUM_MAC_SOURCES) {
printk ("%s: unknown irq %d requested by %s\n",
__FUNCTION__, irq, devname);
}
/* Get a node and stick it onto the right list */
if (!(node = new_irq_node())) return -ENOMEM;
node->handler = handler;
node->flags = flags;
node->dev_id = dev_id;
node->devname = devname;
node->next = NULL;
mac_insert_irq(&mac_irq_list[irq], node);
/* Now enable the IRQ source */
mac_enable_irq(irq);
return 0;
}
/*
* Removes an interrupt service routine from an interrupt source.
*/
void mac_free_irq(unsigned int irq, void *dev_id)
{
#ifdef DEBUG_MACINTS
printk ("%s: irq %d freed by %p\n", __FUNCTION__, irq, dev_id);
#endif
if (irq < VIA1_SOURCE_BASE) {
cpu_free_irq(irq, dev_id);
return;
}
if (irq >= NUM_MAC_SOURCES) {
printk ("%s: unknown irq %d freed\n",
__FUNCTION__, irq);
return;
}
mac_delete_irq(&mac_irq_list[irq], dev_id);
/* If the list for this interrupt is */
/* empty then disable the source. */
if (!mac_irq_list[irq]) {
mac_disable_irq(irq);
}
}
/*
* Generate a pretty listing for /proc/interrupts
*
* By the time we're called the autovector interrupt list has already been
* generated, so we just need to do the machspec interrupts.
*
* 990506 (jmt) - rewritten to handle chained machspec interrupt handlers.
* Also removed display of num_spurious it is already
* displayed for us as autovector irq 0.
*/
int show_mac_interrupts(struct seq_file *p, void *v)
{
int i;
irq_node_t *node;
char *base;
/* Don't do Nubus interrupts in this loop; we do them separately */
/* below so that we can print slot numbers instead of IRQ numbers */
for (i = VIA1_SOURCE_BASE ; i < NUM_MAC_SOURCES ; ++i) {
/* Nonexistant interrupt or nothing registered; skip it. */
if ((node = mac_irq_list[i]) == NULL) continue;
if (node->flags & IRQ_FLG_STD) continue;
base = "";
switch(IRQ_SRC(i)) {
case 1: base = "via1";
break;
case 2: if (oss_present) {
base = "oss";
} else {
base = "via2";
}
break;
case 3:
case 4:
case 5:
case 6: if (psc_present) {
base = "psc";
} else if (oss_present) {
base = "oss";
} else {
if (IRQ_SRC(i) == 4) base = "scc";
}
break;
case 7: base = "nbus";
break;
case 8: base = "bbn";
break;
}
seq_printf(p, "%4s %2d: %10u ", base, i, kstat_cpu(0).irqs[i]);
do {
if (node->flags & IRQ_FLG_FAST) {
seq_puts(p, "F ");
} else if (node->flags & IRQ_FLG_SLOW) {
seq_puts(p, "S ");
} else {
seq_puts(p, " ");
}
seq_printf(p, "%s\n", node->devname);
if ((node = node->next)) {
seq_puts(p, " ");
}
} while(node);
}
return 0;
}
void mac_default_handler(int irq, void *dev_id, struct pt_regs *regs)
{
#ifdef DEBUG_SPURIOUS
printk("Unexpected IRQ %d on device %p\n", irq, dev_id);
#endif
}
static int num_debug[8];
irqreturn_t mac_debug_handler(int irq, void *dev_id, struct pt_regs *regs)
{
if (num_debug[irq] < 10) {
printk("DEBUG: Unexpected IRQ %d\n", irq);
num_debug[irq]++;
}
return IRQ_HANDLED;
}
static int in_nmi;
static volatile int nmi_hold;
irqreturn_t mac_nmi_handler(int irq, void *dev_id, struct pt_regs *fp)
{
int i;
/*
* generate debug output on NMI switch if 'debug' kernel option given
* (only works with Penguin!)
*/
in_nmi++;
for (i=0; i<100; i++)
udelay(1000);
if (in_nmi == 1) {
nmi_hold = 1;
printk("... pausing, press NMI to resume ...");
} else {
printk(" ok!\n");
nmi_hold = 0;
}
barrier();
while (nmi_hold == 1)
udelay(1000);
if ( console_loglevel >= 8 ) {
#if 0
show_state();
printk("PC: %08lx\nSR: %04x SP: %p\n", fp->pc, fp->sr, fp);
printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
fp->d0, fp->d1, fp->d2, fp->d3);
printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
if (STACK_MAGIC != *(unsigned long *)current->kernel_stack_page)
printk("Corrupted stack page\n");
printk("Process %s (pid: %d, stackpage=%08lx)\n",
current->comm, current->pid, current->kernel_stack_page);
if (intr_count == 1)
dump_stack((struct frame *)fp);
#else
/* printk("NMI "); */
#endif
}
in_nmi--;
return IRQ_HANDLED;
}
/*
* Simple routines for masking and unmasking
* SCC interrupts in cases where this can't be
* done in hardware (only the PSC can do that.)
*/
static void scc_irq_enable(int irq) {
int irq_idx = IRQ_IDX(irq);
scc_mask |= (1 << irq_idx);
}
static void scc_irq_disable(int irq) {
int irq_idx = IRQ_IDX(irq);
scc_mask &= ~(1 << irq_idx);
}
/*
* SCC master interrupt handler. We have to do a bit of magic here
* to figure out what channel gave us the interrupt; putting this
* here is cleaner than hacking it into drivers/char/macserial.c.
*/
void mac_scc_dispatch(int irq, void *dev_id, struct pt_regs *regs)
{
volatile unsigned char *scc = (unsigned char *) mac_bi_data.sccbase + 2;
unsigned char reg;
unsigned long flags;
/* Read RR3 from the chip. Always do this on channel A */
/* This must be an atomic operation so disable irqs. */
local_irq_save(flags);
*scc = 3;
reg = *scc;
local_irq_restore(flags);
/* Now dispatch. Bits 0-2 are for channel B and */
/* bits 3-5 are for channel A. We can safely */
/* ignore the remaining bits here. */
/* */
/* Note that we're ignoring scc_mask for now. */
/* If we actually mask the ints then we tend to */
/* get hammered by very persistent SCC irqs, */
/* and since they're autovector interrupts they */
/* pretty much kill the system. */
if (reg & 0x38) mac_do_irq_list(IRQ_SCCA, regs);
if (reg & 0x07) mac_do_irq_list(IRQ_SCCB, regs);
}