linux/drivers/net/wireless/ath/ath10k
Bartosz Markowski 079a0490e2 ath10k: introduce dev_id to hw_params
A follow up patch introducing a QCA9377 hw1.0 support will need
this device identification helper for an explicit distinction of
HWs, as apparently both QCA6174 hw3.0 and QCA9377 share the same BMI
target version (0x0502000x). For the QCA9377 hw1.1 previously
added we were just lucky we did not overlap with the same chip_id_rev.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-11-12 21:03:04 +02:00
..
bmi.c
bmi.h ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
ce.c ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
ce.h ath10k: remove shadow copy of CE descriptors for source ring 2015-10-29 12:59:04 +02:00
core.c ath10k: introduce dev_id to hw_params 2015-11-12 21:03:04 +02:00
core.h ath10k: introduce dev_id to hw_params 2015-11-12 21:03:04 +02:00
debug.c ath10k: make fw stats prints specific to firmware version 2015-10-19 17:42:03 +03:00
debug.h ath10k: make fw stats prints specific to firmware version 2015-10-19 17:42:03 +03:00
debugfs_sta.c ath10k: add support to send delba 2015-01-13 16:13:47 +02:00
hif.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.c ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htc.h ath10k: remove htc polling for tx completion 2015-10-16 15:49:41 +03:00
htt_rx.c ath10k: export htt tx rx handlers 2015-10-16 15:49:35 +03:00
htt_tx.c ath10k: export htt tx rx handlers 2015-10-16 15:49:35 +03:00
htt.c ath10k: enable raw encap mode and software crypto engine 2015-07-29 11:28:24 +03:00
htt.h ath10k: export htt tx rx handlers 2015-10-16 15:49:35 +03:00
hw.c ath10k: add cycle/rx_clear counters frequency to hw_params 2015-08-17 16:46:21 +03:00
hw.h ath10k: introduce dev_id to hw_params 2015-11-12 21:03:04 +02:00
Kconfig
mac.c ath10k: fix invalid NSS for 4x4 devices 2015-11-10 11:48:42 +02:00
mac.h ath10k: fix per-vif queue locking 2015-07-11 19:06:26 +03:00
Makefile ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
p2p.c ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
p2p.h ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
pci.c ath10k: introduce dev_id to hw_params 2015-11-12 21:03:04 +02:00
pci.h ath10k: disable PCI PS for QCA988X and QCA99X0 2015-10-19 17:38:01 +03:00
rx_desc.h ath10k: add support for qca99x0 Rx descriptors 2015-07-24 10:44:55 +03:00
spectral.c ath10k: add spectral scan support for 10.4 fw 2015-08-26 11:09:12 +03:00
spectral.h ath10k: refactor phyerr event handlers 2015-08-17 17:43:29 +03:00
swap.c ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
swap.h ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
targaddrs.h ath10k: add QCA9377 chipset support 2015-10-29 13:02:33 +02:00
testmode_i.h
testmode.c ath10k: add FW API support to test mode 2015-10-29 12:48:01 +02:00
testmode.h
thermal.c ath10k: fix cleanup in ath10k_thermal_unregister 2015-10-14 08:59:08 +03:00
thermal.h ath10k: configure thermal throttle while powering up 2015-03-23 17:16:37 +02:00
trace.c
trace.h ath10k: add extra check for frame tracing 2015-04-17 09:33:48 +03:00
txrx.c ath10k: use pre-allocated DMA buffer in Tx 2015-10-06 15:04:12 +03:00
txrx.h
wmi-ops.h ath10k: enable adaptive CCA 2015-10-28 21:33:03 +02:00
wmi-tlv.c ath10k: add FW API support to test mode 2015-10-29 12:48:01 +02:00
wmi-tlv.h ath10k: implement tx pause wmi event 2015-04-01 20:31:08 +03:00
wmi.c ath10k: remove supported chain mask 2015-10-29 13:00:34 +02:00
wmi.h ath10k: add fw_stats support to 10.4 firmware 2015-10-29 12:54:45 +02:00
wow.c ath10k: fix hw reconfig on wow failure 2015-08-13 14:22:49 +03:00
wow.h ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00