linux/drivers/usb
Greg Kroah-Hartman 073b854693 Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-next
* 'for-next' of git://gitorious.org/usb/usb: (47 commits)
  usb: musb: Enable DMA mode1 RX for transfers without short packets
  usb: musb: fix build breakage
  usb: gadget: audio: queue wLength-sized requests
  usb: gadget: audio: actually support both speeds
  usb: gadget: storage: make FSG_NUM_BUFFERS variable size
  USB: gadget: storage: remove alignment assumption
  usb: gadget: storage: adapt logic block size to bound block devices
  usb: dwc3: gadget: improve debug on link state change
  usb: dwc3: omap: set idle and standby modes
  usb: dwc3: ep0: introduce ep0_expect_in flag
  usb: dwc3: ep0: giveback requests on stall_and_restart
  usb: dwc3: gadget: drop the useless dma_sync_single* calls
  usb: dwc3: gadget: fix GCTL programming
  usb: dwc3: define ScaleDown macro helper
  usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN
  usb: dwc3: gadget: do not map/unmap ZLP transfers
  usb: dwc3: omap: fix IRQ handling
  usb: dwc3: omap: change IRQ name to dwc3-omap
  usb: dwc3: add module.h to dwc3-omap.c and core.c
  usb: dwc3: omap: distinguish between SW and HW modes
  ...
2011-09-18 01:45:29 -07:00
..
atm drivers: usb: atm: ueagle-atm: Add missing const qualifier 2011-07-08 14:51:30 -07:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class usb: cdc-acm: Owen SI-30 support 2011-09-18 01:33:07 -07:00
core USB: irq: Remove IRQF_DISABLED 2011-09-18 01:39:36 -07:00
dwc3 usb: dwc3: gadget: improve debug on link state change 2011-09-09 13:05:31 +03:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-next 2011-09-18 01:45:29 -07:00
host USB: irq: Remove IRQF_DISABLED 2011-09-18 01:39:36 -07:00
image atomic: use <linux/atomic.h> 2011-07-26 16:49:47 -07:00
misc usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
mon USB: mon: Allow to use usbmon without debugfs 2011-07-08 14:55:09 -07:00
musb Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-next 2011-09-18 01:45:29 -07:00
otg USB: irq: Remove IRQF_DISABLED 2011-09-18 01:39:36 -07:00
renesas_usbhs USB: irq: Remove IRQF_DISABLED 2011-09-18 01:39:36 -07:00
serial USB: option: add various ZTE device network interfaces to the blacklist 2011-09-18 01:23:23 -07:00
storage usb-storage: fix realtek cr configuration 2011-09-18 01:33:07 -07:00
wusbcore USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00
Kconfig usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
Makefile usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
README
usb-common.c usb: Provide usb_speed_string() function 2011-09-18 01:29:04 -07:00
usb-skeleton.c USB: use usb_endpoint_maxp() instead of le16_to_cpu() 2011-08-23 09:47:40 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.