linux/drivers/net/ixgbe
Emil Tantilov 0665b09f81 ixgbe: add support for 64k EEPROM for 82599
82599 supports up to 32k EEPROM addressing via EERD register. If we
wish to address larger EEPROM this have to be done via serial interface.
This patch adds function ixgbe_read_eeprom_82599 which selects the best
method to read the EEPROM.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-04-27 02:10:12 -07:00
..
ixgbe_82598.c ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe_82599.c ixgbe: add support for 64k EEPROM for 82599 2011-04-27 02:10:12 -07:00
ixgbe_common.c ixgbe: make device_caps() generic 2011-04-13 19:26:06 -07:00
ixgbe_common.h ixgbe: make device_caps() generic 2011-04-13 19:26:06 -07:00
ixgbe_dcb_82598.c ixgbe: DCB, PFC not cleared until reset occurs 2011-03-12 04:15:35 -08:00
ixgbe_dcb_82598.h ixgbe: cleanup copyright string for 2011 2011-03-03 04:43:24 -08:00
ixgbe_dcb_82599.c ixgbe: DCB, X540 devices do not respond to pause frames 2011-04-13 19:27:18 -07:00
ixgbe_dcb_82599.h ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe_dcb_nl.c ixgbe: cleanup short msleep's (<20ms) to use usleep_range 2011-04-13 19:23:11 -07:00
ixgbe_dcb.c Fix common misspellings 2011-03-31 11:26:23 -03:00
ixgbe_dcb.h ixgbe: IEEE 802.1Qaz, implement priority assignment table 2011-03-12 04:12:54 -08:00
ixgbe_ethtool.c ixgbe: cleanup short msleep's (<20ms) to use usleep_range 2011-04-13 19:23:11 -07:00
ixgbe_fcoe.c ixgbe: DCB remove ixgbe_fcoe_getapp routine 2011-03-12 04:11:11 -08:00
ixgbe_fcoe.h ixgbe: add support to FCoE DDP in target mode 2011-03-07 18:04:35 -08:00
ixgbe_main.c ixgbe: add support for new HW 2011-04-13 19:24:38 -07:00
ixgbe_mbx.c ixgbe: remove timer reset to 0 on timeout 2011-03-12 04:13:41 -08:00
ixgbe_mbx.h ixgbe: register defines cleanup 2011-04-27 02:08:50 -07:00
ixgbe_phy.c ixgbe: explicitly disable 100H for x540 2011-04-27 02:07:31 -07:00
ixgbe_phy.h ixgbe: update PHY code to support 100Mbps as well as 1G/10G 2011-03-12 04:14:01 -08:00
ixgbe_sriov.c ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
ixgbe_sriov.h ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
ixgbe_type.h ixgbe: register defines cleanup 2011-04-27 02:08:50 -07:00
ixgbe_x540.c ixgbe: DCB, misallocated packet buffer size with X540 device 2011-04-13 19:26:43 -07:00
ixgbe.h ixgbe: add support for VF Transmit rate limit using iproute2 2011-03-12 04:15:08 -08:00
Makefile ixgbe: add MAC and PHY support for x540 2010-11-16 19:27:16 -08:00