forked from Minki/linux
958dd242b6
Replaced the acpi_os_queue_for_execution() with a new interface named acpi_os_execute(). The major difference is that the new interface does not have a Priority parameter, this appeared to be useless and has been replaced by a Type parameter. The Type tells the OS what type of execution is being requested, such as global lock handler, notify handler, GPE handler, etc. This allows the host to queue and execute the request as appropriate for the request type, possibly using different work queues and different priorities for the various request types. This enables fixes for multithreading deadlock problems such as http://bugzilla.kernel.org/show_bug.cgi?id=5534 (Alexey Starikovskiy and Bob Moore) Fixed a possible memory leak associated with the support for the so-called "implicit return" ACPI extension. Reported by FreeBSD (Fiodor Suietov) http://bugzilla.kernel.org/show_bug.cgi?id=6514 Fixed a problem with the Load() operator where a table load from an operation region could overwrite an internal table buffer by up to 7 bytes and cause alignment faults on IPF systems. (With assistance from Luming Yu) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
371 lines
18 KiB
C
371 lines
18 KiB
C
/******************************************************************************
|
|
*
|
|
* Name: actbl.h - Basic ACPI Table Definitions
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/*
|
|
* Copyright (C) 2000 - 2006, R. Byron Moore
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*/
|
|
|
|
#ifndef __ACTBL_H__
|
|
#define __ACTBL_H__
|
|
|
|
/*
|
|
* Values for description table header signatures. Useful because they make
|
|
* it more difficult to inadvertently type in the wrong signature.
|
|
*/
|
|
#define DSDT_SIG "DSDT" /* Differentiated System Description Table */
|
|
#define FADT_SIG "FACP" /* Fixed ACPI Description Table */
|
|
#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */
|
|
#define PSDT_SIG "PSDT" /* Persistent System Description Table */
|
|
#define RSDP_SIG "RSD PTR " /* Root System Description Pointer */
|
|
#define RSDT_SIG "RSDT" /* Root System Description Table */
|
|
#define XSDT_SIG "XSDT" /* Extended System Description Table */
|
|
#define SSDT_SIG "SSDT" /* Secondary System Description Table */
|
|
#define RSDP_NAME "RSDP"
|
|
|
|
/*
|
|
* All tables and structures must be byte-packed to match the ACPI
|
|
* specification, since the tables are provided by the system BIOS
|
|
*/
|
|
#pragma pack(1)
|
|
|
|
/*
|
|
* These are the ACPI tables that are directly consumed by the subsystem.
|
|
*
|
|
* The RSDP and FACS do not use the common ACPI table header. All other ACPI
|
|
* tables use the header.
|
|
*
|
|
* Note about bitfields: The u8 type is used for bitfields in ACPI tables.
|
|
* This is the only type that is even remotely portable. Anything else is not
|
|
* portable, so do not use any other bitfield types.
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* ACPI Table Header. This common header is used by all tables except the
|
|
* RSDP and FACS. The define is used for direct inclusion of header into
|
|
* other ACPI tables
|
|
*
|
|
******************************************************************************/
|
|
|
|
#define ACPI_TABLE_HEADER_DEF \
|
|
char signature[4]; /* ASCII table signature */\
|
|
u32 length; /* Length of table in bytes, including this header */\
|
|
u8 revision; /* ACPI Specification minor version # */\
|
|
u8 checksum; /* To make sum of entire table == 0 */\
|
|
char oem_id[6]; /* ASCII OEM identification */\
|
|
char oem_table_id[8]; /* ASCII OEM table identification */\
|
|
u32 oem_revision; /* OEM revision number */\
|
|
char asl_compiler_id[4]; /* ASCII ASL compiler vendor ID */\
|
|
u32 asl_compiler_revision; /* ASL compiler version */
|
|
|
|
struct acpi_table_header {
|
|
ACPI_TABLE_HEADER_DEF};
|
|
|
|
/*
|
|
* GAS - Generic Address Structure (ACPI 2.0+)
|
|
*/
|
|
struct acpi_generic_address {
|
|
u8 address_space_id; /* Address space where struct or register exists */
|
|
u8 register_bit_width; /* Size in bits of given register */
|
|
u8 register_bit_offset; /* Bit offset within the register */
|
|
u8 access_width; /* Minimum Access size (ACPI 3.0) */
|
|
u64 address; /* 64-bit address of struct or register */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* RSDP - Root System Description Pointer (Signature is "RSD PTR ")
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct rsdp_descriptor {
|
|
char signature[8]; /* ACPI signature, contains "RSD PTR " */
|
|
u8 checksum; /* ACPI 1.0 checksum */
|
|
char oem_id[6]; /* OEM identification */
|
|
u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
|
|
u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
|
|
u32 length; /* Table length in bytes, including header (ACPI 2.0+) */
|
|
u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
|
|
u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
|
};
|
|
|
|
#define ACPI_RSDP_REV0_SIZE 20 /* Size of original ACPI 1.0 RSDP */
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* RSDT/XSDT - Root System Description Tables
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct rsdt_descriptor {
|
|
ACPI_TABLE_HEADER_DEF u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
|
|
};
|
|
|
|
struct xsdt_descriptor {
|
|
ACPI_TABLE_HEADER_DEF u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FACS - Firmware ACPI Control Structure (FACS)
|
|
*
|
|
******************************************************************************/
|
|
|
|
struct facs_descriptor {
|
|
char signature[4]; /* ASCII table signature */
|
|
u32 length; /* Length of structure, in bytes */
|
|
u32 hardware_signature; /* Hardware configuration signature */
|
|
u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
|
|
u32 global_lock; /* Global Lock for shared hardware resources */
|
|
|
|
/* Flags (32 bits) */
|
|
|
|
u8 S4bios_f:1; /* 00: S4BIOS support is present */
|
|
u8:7; /* 01-07: Reserved, must be zero */
|
|
u8 reserved1[3]; /* 08-31: Reserved, must be zero */
|
|
|
|
u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
|
|
u8 version; /* Version of this table (ACPI 2.0+) */
|
|
u8 reserved[31]; /* Reserved, must be zero */
|
|
};
|
|
|
|
#define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */
|
|
#define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */
|
|
|
|
/*
|
|
* Common FACS - This is a version-independent FACS structure used for internal use only
|
|
*/
|
|
struct acpi_common_facs {
|
|
u32 *global_lock;
|
|
u64 *firmware_waking_vector;
|
|
u8 vector_width;
|
|
};
|
|
|
|
/*******************************************************************************
|
|
*
|
|
* FADT - Fixed ACPI Description Table (Signature "FACP")
|
|
*
|
|
******************************************************************************/
|
|
|
|
/* Fields common to all versions of the FADT */
|
|
|
|
#define ACPI_FADT_COMMON \
|
|
ACPI_TABLE_HEADER_DEF \
|
|
u32 V1_firmware_ctrl; /* 32-bit physical address of FACS */ \
|
|
u32 V1_dsdt; /* 32-bit physical address of DSDT */ \
|
|
u8 reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \
|
|
u8 prefer_PM_profile; /* Conveys preferred power management profile to OSPM. */ \
|
|
u16 sci_int; /* System vector of SCI interrupt */ \
|
|
u32 smi_cmd; /* Port address of SMI command port */ \
|
|
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ \
|
|
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ \
|
|
u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ \
|
|
u8 pstate_cnt; /* Processor performance state control*/ \
|
|
u32 V1_pm1a_evt_blk; /* Port address of Power Mgt 1a Event Reg Blk */ \
|
|
u32 V1_pm1b_evt_blk; /* Port address of Power Mgt 1b Event Reg Blk */ \
|
|
u32 V1_pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ \
|
|
u32 V1_pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ \
|
|
u32 V1_pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ \
|
|
u32 V1_pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \
|
|
u32 V1_gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ \
|
|
u32 V1_gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ \
|
|
u8 pm1_evt_len; /* Byte Length of ports at pm1_x_evt_blk */ \
|
|
u8 pm1_cnt_len; /* Byte Length of ports at pm1_x_cnt_blk */ \
|
|
u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ \
|
|
u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ \
|
|
u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ \
|
|
u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ \
|
|
u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ \
|
|
u8 cst_cnt; /* Support for the _CST object and C States change notification.*/ \
|
|
u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ \
|
|
u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ \
|
|
u16 flush_size; /* Processor's memory cache line width, in bytes */ \
|
|
u16 flush_stride; /* Number of flush strides that need to be read */ \
|
|
u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg*/ \
|
|
u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register.*/ \
|
|
u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \
|
|
u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \
|
|
u8 century; /* Index to century in RTC CMOS RAM */ \
|
|
u16 iapc_boot_arch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ \
|
|
u8 reserved2; /* Reserved, must be zero */
|
|
|
|
/*
|
|
* ACPI 2.0+ FADT
|
|
*/
|
|
struct fadt_descriptor {
|
|
ACPI_FADT_COMMON
|
|
/* Flags (32 bits) */
|
|
u8 wb_invd:1; /* 00: The wbinvd instruction works properly */
|
|
u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */
|
|
u8 proc_c1:1; /* 02: All processors support C1 state */
|
|
u8 plvl2_up:1; /* 03: C2 state works on MP system */
|
|
u8 pwr_button:1; /* 04: Power button is handled as a generic feature */
|
|
u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */
|
|
u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */
|
|
u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */
|
|
u8 tmr_val_ext:1; /* 08: tmr_val is 32 bits 0=24-bits */
|
|
u8 dock_cap:1; /* 09: Docking supported */
|
|
u8 reset_reg_sup:1; /* 10: System reset via the FADT RESET_REG supported */
|
|
u8 sealed_case:1; /* 11: No internal expansion capabilities and case is sealed */
|
|
u8 headless:1; /* 12: No local video capabilities or local input devices */
|
|
u8 cpu_sw_sleep:1; /* 13: Must execute native instruction after writing SLP_TYPx register */
|
|
|
|
u8 pci_exp_wak:1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
|
|
u8 use_platform_clock:1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */
|
|
u8 S4rtc_sts_valid:1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
|
|
u8 remote_power_on_capable:1; /* 17: System is compatible with remote power on (ACPI 3.0) */
|
|
u8 force_apic_cluster_model:1; /* 18: All local APICs must use cluster model (ACPI 3.0) */
|
|
u8 force_apic_physical_destination_mode:1; /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */
|
|
u8:4; /* 20-23: Reserved, must be zero */
|
|
u8 reserved3; /* 24-31: Reserved, must be zero */
|
|
|
|
struct acpi_generic_address reset_register; /* Reset register address in GAS format */
|
|
u8 reset_value; /* Value to write to the reset_register port to reset the system */
|
|
u8 reserved4[3]; /* These three bytes must be zero */
|
|
u64 xfirmware_ctrl; /* 64-bit physical address of FACS */
|
|
u64 Xdsdt; /* 64-bit physical address of DSDT */
|
|
struct acpi_generic_address xpm1a_evt_blk; /* Extended Power Mgt 1a acpi_event Reg Blk address */
|
|
struct acpi_generic_address xpm1b_evt_blk; /* Extended Power Mgt 1b acpi_event Reg Blk address */
|
|
struct acpi_generic_address xpm1a_cnt_blk; /* Extended Power Mgt 1a Control Reg Blk address */
|
|
struct acpi_generic_address xpm1b_cnt_blk; /* Extended Power Mgt 1b Control Reg Blk address */
|
|
struct acpi_generic_address xpm2_cnt_blk; /* Extended Power Mgt 2 Control Reg Blk address */
|
|
struct acpi_generic_address xpm_tmr_blk; /* Extended Power Mgt Timer Ctrl Reg Blk address */
|
|
struct acpi_generic_address xgpe0_blk; /* Extended General Purpose acpi_event 0 Reg Blk address */
|
|
struct acpi_generic_address xgpe1_blk; /* Extended General Purpose acpi_event 1 Reg Blk address */
|
|
};
|
|
|
|
/*
|
|
* "Down-revved" ACPI 2.0 FADT descriptor
|
|
* Defined here to allow compiler to generate the length of the struct
|
|
*/
|
|
struct fadt_descriptor_rev2_minus {
|
|
ACPI_FADT_COMMON u32 flags;
|
|
struct acpi_generic_address reset_register; /* Reset register address in GAS format */
|
|
u8 reset_value; /* Value to write to the reset_register port to reset the system. */
|
|
u8 reserved7[3]; /* Reserved, must be zero */
|
|
};
|
|
|
|
/*
|
|
* ACPI 1.0 FADT
|
|
* Defined here to allow compiler to generate the length of the struct
|
|
*/
|
|
struct fadt_descriptor_rev1 {
|
|
ACPI_FADT_COMMON u32 flags;
|
|
};
|
|
|
|
/* FADT: Prefered Power Management Profiles */
|
|
|
|
#define PM_UNSPECIFIED 0
|
|
#define PM_DESKTOP 1
|
|
#define PM_MOBILE 2
|
|
#define PM_WORKSTATION 3
|
|
#define PM_ENTERPRISE_SERVER 4
|
|
#define PM_SOHO_SERVER 5
|
|
#define PM_APPLIANCE_PC 6
|
|
|
|
/* FADT: Boot Arch Flags */
|
|
|
|
#define BAF_LEGACY_DEVICES 0x0001
|
|
#define BAF_8042_KEYBOARD_CONTROLLER 0x0002
|
|
|
|
#define FADT2_REVISION_ID 3
|
|
#define FADT2_MINUS_REVISION_ID 2
|
|
|
|
/* Reset to default packing */
|
|
|
|
#pragma pack()
|
|
|
|
/*
|
|
* This macro is temporary until the table bitfield flag definitions
|
|
* are removed and replaced by a Flags field.
|
|
*/
|
|
#define ACPI_FLAG_OFFSET(d,f,o) (u8) (ACPI_OFFSET (d,f) + \
|
|
sizeof(((d *)0)->f) + o)
|
|
/*
|
|
* Get the remaining ACPI tables
|
|
*/
|
|
#include "actbl1.h"
|
|
|
|
/*
|
|
* ACPI Table information. We save the table address, length,
|
|
* and type of memory allocation (mapped or allocated) for each
|
|
* table for 1) when we exit, and 2) if a new table is installed
|
|
*/
|
|
#define ACPI_MEM_NOT_ALLOCATED 0
|
|
#define ACPI_MEM_ALLOCATED 1
|
|
#define ACPI_MEM_MAPPED 2
|
|
|
|
/* Definitions for the Flags bitfield member of struct acpi_table_support */
|
|
|
|
#define ACPI_TABLE_SINGLE 0x00
|
|
#define ACPI_TABLE_MULTIPLE 0x01
|
|
#define ACPI_TABLE_EXECUTABLE 0x02
|
|
|
|
#define ACPI_TABLE_ROOT 0x00
|
|
#define ACPI_TABLE_PRIMARY 0x10
|
|
#define ACPI_TABLE_SECONDARY 0x20
|
|
#define ACPI_TABLE_ALL 0x30
|
|
#define ACPI_TABLE_TYPE_MASK 0x30
|
|
|
|
/* Data about each known table type */
|
|
|
|
struct acpi_table_support {
|
|
char *name;
|
|
char *signature;
|
|
void **global_ptr;
|
|
u8 sig_length;
|
|
u8 flags;
|
|
};
|
|
|
|
extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
|
|
* needed for certain workarounds */
|
|
/* Macros used to generate offsets to specific table fields */
|
|
|
|
#define ACPI_FACS_OFFSET(f) (u8) ACPI_OFFSET (struct facs_descriptor,f)
|
|
#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct fadt_descriptor, f)
|
|
#define ACPI_GAS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_generic_address,f)
|
|
#define ACPI_HDR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_header,f)
|
|
#define ACPI_RSDP_OFFSET(f) (u8) ACPI_OFFSET (struct rsdp_descriptor,f)
|
|
|
|
#define ACPI_FADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct fadt_descriptor,f,o)
|
|
#define ACPI_FACS_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct facs_descriptor,f,o)
|
|
|
|
#endif /* __ACTBL_H__ */
|