linux/block/blk-lib.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

379 lines
9.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Functions related to generic helpers functions
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
#include "blk.h"
static struct bio *next_bio(struct bio *bio, unsigned int nr_pages,
gfp_t gfp)
{
struct bio *new = bio_alloc(gfp, nr_pages);
if (bio) {
bio_chain(bio, new);
submit_bio(bio);
}
return new;
}
int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, int flags,
struct bio **biop)
{
struct request_queue *q = bdev_get_queue(bdev);
struct bio *bio = *biop;
unsigned int granularity;
unsigned int op;
int alignment;
sector_t bs_mask;
if (!q)
return -ENXIO;
if (flags & BLKDEV_DISCARD_SECURE) {
if (!blk_queue_secure_erase(q))
return -EOPNOTSUPP;
op = REQ_OP_SECURE_ERASE;
} else {
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
op = REQ_OP_DISCARD;
}
bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
if ((sector | nr_sects) & bs_mask)
return -EINVAL;
/* Zero-sector (unknown) and one-sector granularities are the same. */
granularity = max(q->limits.discard_granularity >> 9, 1U);
alignment = (bdev_discard_alignment(bdev) >> 9) % granularity;
while (nr_sects) {
unsigned int req_sects;
sector_t end_sect, tmp;
/* Make sure bi_size doesn't overflow */
req_sects = min_t(sector_t, nr_sects, UINT_MAX >> 9);
/**
* If splitting a request, and the next starting sector would be
* misaligned, stop the discard at the previous aligned sector.
*/
end_sect = sector + req_sects;
tmp = end_sect;
if (req_sects < nr_sects &&
sector_div(tmp, granularity) != alignment) {
end_sect = end_sect - alignment;
sector_div(end_sect, granularity);
end_sect = end_sect * granularity + alignment;
req_sects = end_sect - sector;
}
bio = next_bio(bio, 0, gfp_mask);
bio->bi_iter.bi_sector = sector;
bio_set_dev(bio, bdev);
bio_set_op_attrs(bio, op, 0);
bio->bi_iter.bi_size = req_sects << 9;
nr_sects -= req_sects;
sector = end_sect;
/*
* We can loop for a long time in here, if someone does
* full device discards (like mkfs). Be nice and allow
* us to schedule out to avoid softlocking if preempt
* is disabled.
*/
cond_resched();
}
*biop = bio;
return 0;
}
EXPORT_SYMBOL(__blkdev_issue_discard);
/**
* blkdev_issue_discard - queue a discard
* @bdev: blockdev to issue discard for
* @sector: start sector
* @nr_sects: number of sectors to discard
* @gfp_mask: memory allocation flags (for bio_alloc)
* @flags: BLKDEV_DISCARD_* flags to control behaviour
*
* Description:
* Issue a discard request for the sectors in question.
*/
int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned long flags)
{
struct bio *bio = NULL;
struct blk_plug plug;
int ret;
blk_start_plug(&plug);
ret = __blkdev_issue_discard(bdev, sector, nr_sects, gfp_mask, flags,
&bio);
if (!ret && bio) {
ret = submit_bio_wait(bio);
if (ret == -EOPNOTSUPP)
ret = 0;
bio_put(bio);
}
blk_finish_plug(&plug);
return ret;
}
EXPORT_SYMBOL(blkdev_issue_discard);
/**
* __blkdev_issue_write_same - generate number of bios with same page
* @bdev: target blockdev
* @sector: start sector
* @nr_sects: number of sectors to write
* @gfp_mask: memory allocation flags (for bio_alloc)
* @page: page containing data to write
* @biop: pointer to anchor bio
*
* Description:
* Generate and issue number of bios(REQ_OP_WRITE_SAME) with same page.
*/
static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, struct page *page,
struct bio **biop)
{
struct request_queue *q = bdev_get_queue(bdev);
unsigned int max_write_same_sectors;
struct bio *bio = *biop;
sector_t bs_mask;
if (!q)
return -ENXIO;
bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
if ((sector | nr_sects) & bs_mask)
return -EINVAL;
if (!bdev_write_same(bdev))
return -EOPNOTSUPP;
/* Ensure that max_write_same_sectors doesn't overflow bi_size */
max_write_same_sectors = UINT_MAX >> 9;
while (nr_sects) {
bio = next_bio(bio, 1, gfp_mask);
bio->bi_iter.bi_sector = sector;
bio_set_dev(bio, bdev);
bio->bi_vcnt = 1;
bio->bi_io_vec->bv_page = page;
bio->bi_io_vec->bv_offset = 0;
bio->bi_io_vec->bv_len = bdev_logical_block_size(bdev);
bio_set_op_attrs(bio, REQ_OP_WRITE_SAME, 0);
if (nr_sects > max_write_same_sectors) {
bio->bi_iter.bi_size = max_write_same_sectors << 9;
nr_sects -= max_write_same_sectors;
sector += max_write_same_sectors;
} else {
bio->bi_iter.bi_size = nr_sects << 9;
nr_sects = 0;
}
cond_resched();
}
*biop = bio;
return 0;
}
/**
* blkdev_issue_write_same - queue a write same operation
* @bdev: target blockdev
* @sector: start sector
* @nr_sects: number of sectors to write
* @gfp_mask: memory allocation flags (for bio_alloc)
* @page: page containing data
*
* Description:
* Issue a write same request for the sectors in question.
*/
int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask,
struct page *page)
{
struct bio *bio = NULL;
struct blk_plug plug;
int ret;
blk_start_plug(&plug);
ret = __blkdev_issue_write_same(bdev, sector, nr_sects, gfp_mask, page,
&bio);
if (ret == 0 && bio) {
ret = submit_bio_wait(bio);
bio_put(bio);
}
blk_finish_plug(&plug);
return ret;
}
EXPORT_SYMBOL(blkdev_issue_write_same);
static int __blkdev_issue_write_zeroes(struct block_device *bdev,
sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
struct bio **biop, unsigned flags)
{
struct bio *bio = *biop;
unsigned int max_write_zeroes_sectors;
struct request_queue *q = bdev_get_queue(bdev);
if (!q)
return -ENXIO;
/* Ensure that max_write_zeroes_sectors doesn't overflow bi_size */
max_write_zeroes_sectors = bdev_write_zeroes_sectors(bdev);
if (max_write_zeroes_sectors == 0)
return -EOPNOTSUPP;
while (nr_sects) {
bio = next_bio(bio, 0, gfp_mask);
bio->bi_iter.bi_sector = sector;
bio_set_dev(bio, bdev);
bio->bi_opf = REQ_OP_WRITE_ZEROES;
if (flags & BLKDEV_ZERO_NOUNMAP)
bio->bi_opf |= REQ_NOUNMAP;
if (nr_sects > max_write_zeroes_sectors) {
bio->bi_iter.bi_size = max_write_zeroes_sectors << 9;
nr_sects -= max_write_zeroes_sectors;
sector += max_write_zeroes_sectors;
} else {
bio->bi_iter.bi_size = nr_sects << 9;
nr_sects = 0;
}
cond_resched();
}
*biop = bio;
return 0;
}
/*
* Convert a number of 512B sectors to a number of pages.
* The result is limited to a number of pages that can fit into a BIO.
* Also make sure that the result is always at least 1 (page) for the cases
* where nr_sects is lower than the number of sectors in a page.
*/
static unsigned int __blkdev_sectors_to_bio_pages(sector_t nr_sects)
{
sector_t pages = DIV_ROUND_UP_SECTOR_T(nr_sects, PAGE_SIZE / 512);
return min(pages, (sector_t)BIO_MAX_PAGES);
}
/**
* __blkdev_issue_zeroout - generate number of zero filed write bios
* @bdev: blockdev to issue
* @sector: start sector
* @nr_sects: number of sectors to write
* @gfp_mask: memory allocation flags (for bio_alloc)
* @biop: pointer to anchor bio
* @flags: controls detailed behavior
*
* Description:
* Zero-fill a block range, either using hardware offload or by explicitly
* writing zeroes to the device.
*
* Note that this function may fail with -EOPNOTSUPP if the driver signals
* zeroing offload support, but the device fails to process the command (for
* some devices there is no non-destructive way to verify whether this
* operation is actually supported). In this case the caller should call
* retry the call to blkdev_issue_zeroout() and the fallback path will be used.
*
* If a device is using logical block provisioning, the underlying space will
* not be released if %flags contains BLKDEV_ZERO_NOUNMAP.
*
* If %flags contains BLKDEV_ZERO_NOFALLBACK, the function will return
* -EOPNOTSUPP if no explicit hardware offload for zeroing is provided.
*/
int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, struct bio **biop,
unsigned flags)
{
int ret;
int bi_size = 0;
struct bio *bio = *biop;
unsigned int sz;
sector_t bs_mask;
bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
if ((sector | nr_sects) & bs_mask)
return -EINVAL;
ret = __blkdev_issue_write_zeroes(bdev, sector, nr_sects, gfp_mask,
biop, flags);
if (ret != -EOPNOTSUPP || (flags & BLKDEV_ZERO_NOFALLBACK))
goto out;
ret = 0;
while (nr_sects != 0) {
bio = next_bio(bio, __blkdev_sectors_to_bio_pages(nr_sects),
gfp_mask);
bio->bi_iter.bi_sector = sector;
bio_set_dev(bio, bdev);
bio_set_op_attrs(bio, REQ_OP_WRITE, 0);
while (nr_sects != 0) {
sz = min((sector_t) PAGE_SIZE, nr_sects << 9);
bi_size = bio_add_page(bio, ZERO_PAGE(0), sz, 0);
nr_sects -= bi_size >> 9;
sector += bi_size >> 9;
if (bi_size < sz)
break;
}
cond_resched();
}
*biop = bio;
out:
return ret;
}
EXPORT_SYMBOL(__blkdev_issue_zeroout);
/**
* blkdev_issue_zeroout - zero-fill a block range
* @bdev: blockdev to write
* @sector: start sector
* @nr_sects: number of sectors to write
* @gfp_mask: memory allocation flags (for bio_alloc)
* @flags: controls detailed behavior
*
* Description:
* Zero-fill a block range, either using hardware offload or by explicitly
* writing zeroes to the device. See __blkdev_issue_zeroout() for the
* valid values for %flags.
*/
int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned flags)
{
int ret;
struct bio *bio = NULL;
struct blk_plug plug;
blk_start_plug(&plug);
ret = __blkdev_issue_zeroout(bdev, sector, nr_sects, gfp_mask,
&bio, flags);
if (ret == 0 && bio) {
ret = submit_bio_wait(bio);
bio_put(bio);
}
blk_finish_plug(&plug);
return ret;
}
EXPORT_SYMBOL(blkdev_issue_zeroout);