059b1c5b15
SPDX v3.10 gained support for GFDL-1.1 with no invariant sections: https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html So, remove the license text, replacing them by this new SPDX license. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
90 lines
3.7 KiB
ReStructuredText
90 lines
3.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
|
|
|
|
.. _rf-tuner-controls:
|
|
|
|
**************************
|
|
RF Tuner Control Reference
|
|
**************************
|
|
|
|
The RF Tuner (RF_TUNER) class includes controls for common features of
|
|
devices having RF tuner.
|
|
|
|
In this context, RF tuner is radio receiver circuit between antenna and
|
|
demodulator. It receives radio frequency (RF) from the antenna and
|
|
converts that received signal to lower intermediate frequency (IF) or
|
|
baseband frequency (BB). Tuners that could do baseband output are often
|
|
called Zero-IF tuners. Older tuners were typically simple PLL tuners
|
|
inside a metal box, while newer ones are highly integrated chips
|
|
without a metal box "silicon tuners". These controls are mostly
|
|
applicable for new feature rich silicon tuners, just because older
|
|
tuners does not have much adjustable features.
|
|
|
|
For more information about RF tuners see
|
|
`Tuner (radio) <http://en.wikipedia.org/wiki/Tuner_%28radio%29>`__
|
|
and `RF front end <http://en.wikipedia.org/wiki/RF_front_end>`__
|
|
from Wikipedia.
|
|
|
|
|
|
.. _rf-tuner-control-id:
|
|
|
|
RF_TUNER Control IDs
|
|
====================
|
|
|
|
``V4L2_CID_RF_TUNER_CLASS (class)``
|
|
The RF_TUNER class descriptor. Calling
|
|
:ref:`VIDIOC_QUERYCTRL` for this control will
|
|
return a description of this control class.
|
|
|
|
``V4L2_CID_RF_TUNER_BANDWIDTH_AUTO (boolean)``
|
|
Enables/disables tuner radio channel bandwidth configuration. In
|
|
automatic mode bandwidth configuration is performed by the driver.
|
|
|
|
``V4L2_CID_RF_TUNER_BANDWIDTH (integer)``
|
|
Filter(s) on tuner signal path are used to filter signal according
|
|
to receiving party needs. Driver configures filters to fulfill
|
|
desired bandwidth requirement. Used when
|
|
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not set. Unit is in Hz. The
|
|
range and step are driver-specific.
|
|
|
|
``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO (boolean)``
|
|
Enables/disables LNA automatic gain control (AGC)
|
|
|
|
``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO (boolean)``
|
|
Enables/disables mixer automatic gain control (AGC)
|
|
|
|
``V4L2_CID_RF_TUNER_IF_GAIN_AUTO (boolean)``
|
|
Enables/disables IF automatic gain control (AGC)
|
|
|
|
``V4L2_CID_RF_TUNER_RF_GAIN (integer)``
|
|
The RF amplifier is the very first amplifier on the receiver signal
|
|
path, just right after the antenna input. The difference between the
|
|
LNA gain and the RF gain in this document is that the LNA gain is
|
|
integrated in the tuner chip while the RF gain is a separate chip.
|
|
There may be both RF and LNA gain controls in the same device. The
|
|
range and step are driver-specific.
|
|
|
|
``V4L2_CID_RF_TUNER_LNA_GAIN (integer)``
|
|
LNA (low noise amplifier) gain is first gain stage on the RF tuner
|
|
signal path. It is located very close to tuner antenna input. Used
|
|
when ``V4L2_CID_RF_TUNER_LNA_GAIN_AUTO`` is not set. See
|
|
``V4L2_CID_RF_TUNER_RF_GAIN`` to understand how RF gain and LNA gain
|
|
differs from the each others. The range and step are
|
|
driver-specific.
|
|
|
|
``V4L2_CID_RF_TUNER_MIXER_GAIN (integer)``
|
|
Mixer gain is second gain stage on the RF tuner signal path. It is
|
|
located inside mixer block, where RF signal is down-converted by the
|
|
mixer. Used when ``V4L2_CID_RF_TUNER_MIXER_GAIN_AUTO`` is not set.
|
|
The range and step are driver-specific.
|
|
|
|
``V4L2_CID_RF_TUNER_IF_GAIN (integer)``
|
|
IF gain is last gain stage on the RF tuner signal path. It is
|
|
located on output of RF tuner. It controls signal level of
|
|
intermediate frequency output or baseband output. Used when
|
|
``V4L2_CID_RF_TUNER_IF_GAIN_AUTO`` is not set. The range and step
|
|
are driver-specific.
|
|
|
|
``V4L2_CID_RF_TUNER_PLL_LOCK (boolean)``
|
|
Is synthesizer PLL locked? RF tuner is receiving given frequency
|
|
when that control is set. This is a read-only control.
|