linux/drivers/iio/light/hid-sensor-prox.c
Greg Kroah-Hartman 61e331202f Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.
Core functionality
 * i and q modifiers from quadrature channels.
 * IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
 * High pass filter attributes added to mirror the existing low pass filter
   ones.
 
 Core cleanups
 * Make IIO tools building more cross compiler friendly.
 * Substantial rework of the function __iio_update_buffers to greatly simplify
   a hideously evolved function.
 
 New drivers and support
 * ACPI0008 ambient light sensor driver. This one has been around a long time to
   will be good to finally get it into mainline.
 * Berlin SOC ADC support.
 * BMC150 magnetometer.  The accelerometer in the same package has been supported
   for quite some time, so good to have this half as well.
 * m62332 DAC driver
 * MEMSIC MMC35420 magnetometer.
 * ROHM BH1710 and similar ambient light sensors.
 * Sensortek STK3310 light sensor.
 * Sensortek STK8312 accelerometer.
 * Sensortek STK8BA50 accelerometer.
 * ti-adc128s052 gains support form the adc122s021 2 channel ADC.
 
 Driver cleanups and functionality.
 * Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
 * bmc150 - decouple trigger from buffer to allow other triggers to be used.
 * bmg160 - decouple trigger from buffer to allow other triggers to be used.
   Fix a trivial unused field.
 * Constify a load of platform_device_id structures.
 * inv_mpu6050 - device tree bindings.
 * hid-sensors - fix a memory leak during probe if certain errors occur.
 * ltr501 - illuminance channel derived (in an non obvious fashion) from the
   intensity channels.
 * ltr501 - fix a boundary check on the proximity threshold.
 * mlx90614 - drop a pointless return.
 * mma8452 - Debugfs register access and fix a bug that had no effect (by
   coincidence)
 * ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
   averaging.  The ideal settings for these tend to be board design specific.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVYfYpAAoJEFSFNJnE9BaI1ScQAIJ2jsFZdf8fcVnWeq0bYx9I
 VUPfz/bJ/kLQRGm/LDgpMPc5o1mOE+rupwFpp/iQf15vVUN86+CRLt0qd5I/cAEg
 I3qbaieS1H9Qyd2dLTgAcZAh6tH7ZvFJm/hB6T5xQAYFGY2IMq/n3qA4//W37tUb
 2bKTRb67LWbGivOvwbxdSpEkBLtVcUw3UNn9nfqjB8BEAHIesh88gJkVKAAuRYqk
 Tm8AzQ7EGsosz2R7mIvukSBwXBcvRyxyOxCdLBPIWSESeLwMiiat0zCfv3MxrYiD
 FVpdlywoReIjDG6z9ALOm4VMtRF2m2VrjPHclQ3kYgYSgyf0fRmoiyGowv7hkeya
 Z+p9ltOZ8qdis+yH1ci9Ch695HURa1m0seirX4exqiv0Crx8UF+iNIvs9Ai84Rv8
 NNVlscoeEyijUaqoBb1YvG/Fryh2IEiGXTkF4Eld+EhW8AKkFFNIqR+Gwvs1YegT
 02A8kHxD0GyMYJo1uEwd+TnKwCBglwsie8omkxOXqsY860DRtBr7jOxyb/RzkSVi
 jGtq1Y4nxVv7q3nkn+vQDRNgAQTbH1EJfrDilpIxIWK+9onNmKMnhKnSTVNAdld/
 Hhn9g/MHptQtmA+DwMcJ3Aqn0xMUdgoE9GIkMGoKSZku9H0DhWHLdxTa2lxdJFUo
 OiWVvP0eJuvu0E0h4eA2
 =uX2k
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-v4.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.

Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
  ones.

Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
  a hideously evolved function.

New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
  will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer.  The accelerometer in the same package has been supported
  for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.

Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
  Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
  intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
  coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
  averaging.  The ideal settings for these tend to be board design specific.
2015-05-24 11:45:21 -07:00

376 lines
10 KiB
C

/*
* HID Sensors Driver
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program.
*
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include "../common/hid-sensors/hid-sensor-trigger.h"
#define CHANNEL_SCAN_INDEX_PRESENCE 0
struct prox_state {
struct hid_sensor_hub_callbacks callbacks;
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info prox_attr;
u32 human_presence;
};
/* Channel definitions */
static const struct iio_chan_spec prox_channels[] = {
{
.type = IIO_PROXIMITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
.scan_index = CHANNEL_SCAN_INDEX_PRESENCE,
}
};
/* Adjust channel real bits based on report descriptor */
static void prox_adjust_channel_bit_mask(struct iio_chan_spec *channels,
int channel, int size)
{
channels[channel].scan_type.sign = 's';
/* Real storage bits will change based on the report desc. */
channels[channel].scan_type.realbits = size * 8;
/* Maximum size of a sample to capture is u32 */
channels[channel].scan_type.storagebits = sizeof(u32) * 8;
}
/* Channel read_raw handler */
static int prox_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct prox_state *prox_state = iio_priv(indio_dev);
int report_id = -1;
u32 address;
int ret_type;
*val = 0;
*val2 = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->scan_index) {
case CHANNEL_SCAN_INDEX_PRESENCE:
report_id = prox_state->prox_attr.report_id;
address =
HID_USAGE_SENSOR_HUMAN_PRESENCE;
break;
default:
report_id = -1;
break;
}
if (report_id >= 0) {
hid_sensor_power_state(&prox_state->common_attributes,
true);
*val = sensor_hub_input_attr_get_raw_value(
prox_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PROX, address,
report_id,
SENSOR_HUB_SYNC);
hid_sensor_power_state(&prox_state->common_attributes,
false);
} else {
*val = 0;
return -EINVAL;
}
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
*val = prox_state->prox_attr.units;
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_OFFSET:
*val = hid_sensor_convert_exponent(
prox_state->prox_attr.unit_expo);
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SAMP_FREQ:
ret_type = hid_sensor_read_samp_freq_value(
&prox_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS:
ret_type = hid_sensor_read_raw_hyst_value(
&prox_state->common_attributes, val, val2);
break;
default:
ret_type = -EINVAL;
break;
}
return ret_type;
}
/* Channel write_raw handler */
static int prox_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct prox_state *prox_state = iio_priv(indio_dev);
int ret = 0;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
ret = hid_sensor_write_samp_freq_value(
&prox_state->common_attributes, val, val2);
break;
case IIO_CHAN_INFO_HYSTERESIS:
ret = hid_sensor_write_raw_hyst_value(
&prox_state->common_attributes, val, val2);
break;
default:
ret = -EINVAL;
}
return ret;
}
static const struct iio_info prox_info = {
.driver_module = THIS_MODULE,
.read_raw = &prox_read_raw,
.write_raw = &prox_write_raw,
};
/* Function to push data to buffer */
static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data,
int len)
{
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
iio_push_to_buffers(indio_dev, data);
}
/* Callback handler to send event after all samples are received and captured */
static int prox_proc_event(struct hid_sensor_hub_device *hsdev,
unsigned usage_id,
void *priv)
{
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct prox_state *prox_state = iio_priv(indio_dev);
dev_dbg(&indio_dev->dev, "prox_proc_event\n");
if (atomic_read(&prox_state->common_attributes.data_ready))
hid_sensor_push_data(indio_dev,
&prox_state->human_presence,
sizeof(prox_state->human_presence));
return 0;
}
/* Capture samples in local storage */
static int prox_capture_sample(struct hid_sensor_hub_device *hsdev,
unsigned usage_id,
size_t raw_len, char *raw_data,
void *priv)
{
struct iio_dev *indio_dev = platform_get_drvdata(priv);
struct prox_state *prox_state = iio_priv(indio_dev);
int ret = -EINVAL;
switch (usage_id) {
case HID_USAGE_SENSOR_HUMAN_PRESENCE:
prox_state->human_presence = *(u32 *)raw_data;
ret = 0;
break;
default:
break;
}
return ret;
}
/* Parse report which is specific to an usage id*/
static int prox_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
struct iio_chan_spec *channels,
unsigned usage_id,
struct prox_state *st)
{
int ret;
ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
usage_id,
HID_USAGE_SENSOR_HUMAN_PRESENCE,
&st->prox_attr);
if (ret < 0)
return ret;
prox_adjust_channel_bit_mask(channels, CHANNEL_SCAN_INDEX_PRESENCE,
st->prox_attr.size);
dev_dbg(&pdev->dev, "prox %x:%x\n", st->prox_attr.index,
st->prox_attr.report_id);
/* Set Sensitivity field ids, when there is no individual modifier */
if (st->common_attributes.sensitivity.index < 0) {
sensor_hub_input_get_attribute_info(hsdev,
HID_FEATURE_REPORT, usage_id,
HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
HID_USAGE_SENSOR_DATA_PRESENCE,
&st->common_attributes.sensitivity);
dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
st->common_attributes.sensitivity.index,
st->common_attributes.sensitivity.report_id);
}
return ret;
}
/* Function to initialize the processing for usage id */
static int hid_prox_probe(struct platform_device *pdev)
{
int ret = 0;
static const char *name = "prox";
struct iio_dev *indio_dev;
struct prox_state *prox_state;
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct prox_state));
if (!indio_dev)
return -ENOMEM;
platform_set_drvdata(pdev, indio_dev);
prox_state = iio_priv(indio_dev);
prox_state->common_attributes.hsdev = hsdev;
prox_state->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_PROX,
&prox_state->common_attributes);
if (ret) {
dev_err(&pdev->dev, "failed to setup common attributes\n");
return ret;
}
indio_dev->channels = kmemdup(prox_channels, sizeof(prox_channels),
GFP_KERNEL);
if (!indio_dev->channels) {
dev_err(&pdev->dev, "failed to duplicate channels\n");
return -ENOMEM;
}
ret = prox_parse_report(pdev, hsdev,
(struct iio_chan_spec *)indio_dev->channels,
HID_USAGE_SENSOR_PROX, prox_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
goto error_free_dev_mem;
}
indio_dev->num_channels =
ARRAY_SIZE(prox_channels);
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &prox_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
NULL, NULL);
if (ret) {
dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
goto error_free_dev_mem;
}
atomic_set(&prox_state->common_attributes.data_ready, 0);
ret = hid_sensor_setup_trigger(indio_dev, name,
&prox_state->common_attributes);
if (ret) {
dev_err(&pdev->dev, "trigger setup failed\n");
goto error_unreg_buffer_funcs;
}
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&pdev->dev, "device register failed\n");
goto error_remove_trigger;
}
prox_state->callbacks.send_event = prox_proc_event;
prox_state->callbacks.capture_sample = prox_capture_sample;
prox_state->callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PROX,
&prox_state->callbacks);
if (ret < 0) {
dev_err(&pdev->dev, "callback reg failed\n");
goto error_iio_unreg;
}
return ret;
error_iio_unreg:
iio_device_unregister(indio_dev);
error_remove_trigger:
hid_sensor_remove_trigger(&prox_state->common_attributes);
error_unreg_buffer_funcs:
iio_triggered_buffer_cleanup(indio_dev);
error_free_dev_mem:
kfree(indio_dev->channels);
return ret;
}
/* Function to deinitialize the processing for usage id */
static int hid_prox_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct prox_state *prox_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PROX);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(&prox_state->common_attributes);
iio_triggered_buffer_cleanup(indio_dev);
kfree(indio_dev->channels);
return 0;
}
static const struct platform_device_id hid_prox_ids[] = {
{
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200011",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_prox_ids);
static struct platform_driver hid_prox_platform_driver = {
.id_table = hid_prox_ids,
.driver = {
.name = KBUILD_MODNAME,
.pm = &hid_sensor_pm_ops,
},
.probe = hid_prox_probe,
.remove = hid_prox_remove,
};
module_platform_driver(hid_prox_platform_driver);
MODULE_DESCRIPTION("HID Sensor Proximity");
MODULE_AUTHOR("Archana Patni <archana.patni@intel.com>");
MODULE_LICENSE("GPL");