Jonathan writes:
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...
657 lines
16 KiB
C
657 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ADMV1013 driver
|
|
*
|
|
* Copyright 2021 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/units.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
/* ADMV1013 Register Map */
|
|
#define ADMV1013_REG_SPI_CONTROL 0x00
|
|
#define ADMV1013_REG_ALARM 0x01
|
|
#define ADMV1013_REG_ALARM_MASKS 0x02
|
|
#define ADMV1013_REG_ENABLE 0x03
|
|
#define ADMV1013_REG_LO_AMP_I 0x05
|
|
#define ADMV1013_REG_LO_AMP_Q 0x06
|
|
#define ADMV1013_REG_OFFSET_ADJUST_I 0x07
|
|
#define ADMV1013_REG_OFFSET_ADJUST_Q 0x08
|
|
#define ADMV1013_REG_QUAD 0x09
|
|
#define ADMV1013_REG_VVA_TEMP_COMP 0x0A
|
|
|
|
/* ADMV1013_REG_SPI_CONTROL Map */
|
|
#define ADMV1013_PARITY_EN_MSK BIT(15)
|
|
#define ADMV1013_SPI_SOFT_RESET_MSK BIT(14)
|
|
#define ADMV1013_CHIP_ID_MSK GENMASK(11, 4)
|
|
#define ADMV1013_CHIP_ID 0xA
|
|
#define ADMV1013_REVISION_ID_MSK GENMASK(3, 0)
|
|
|
|
/* ADMV1013_REG_ALARM Map */
|
|
#define ADMV1013_PARITY_ERROR_MSK BIT(15)
|
|
#define ADMV1013_TOO_FEW_ERRORS_MSK BIT(14)
|
|
#define ADMV1013_TOO_MANY_ERRORS_MSK BIT(13)
|
|
#define ADMV1013_ADDRESS_RANGE_ERROR_MSK BIT(12)
|
|
|
|
/* ADMV1013_REG_ENABLE Map */
|
|
#define ADMV1013_VGA_PD_MSK BIT(15)
|
|
#define ADMV1013_MIXER_PD_MSK BIT(14)
|
|
#define ADMV1013_QUAD_PD_MSK GENMASK(13, 11)
|
|
#define ADMV1013_BG_PD_MSK BIT(10)
|
|
#define ADMV1013_MIXER_IF_EN_MSK BIT(7)
|
|
#define ADMV1013_DET_EN_MSK BIT(5)
|
|
|
|
/* ADMV1013_REG_LO_AMP Map */
|
|
#define ADMV1013_LOAMP_PH_ADJ_FINE_MSK GENMASK(13, 7)
|
|
#define ADMV1013_MIXER_VGATE_MSK GENMASK(6, 0)
|
|
|
|
/* ADMV1013_REG_OFFSET_ADJUST Map */
|
|
#define ADMV1013_MIXER_OFF_ADJ_P_MSK GENMASK(15, 9)
|
|
#define ADMV1013_MIXER_OFF_ADJ_N_MSK GENMASK(8, 2)
|
|
|
|
/* ADMV1013_REG_QUAD Map */
|
|
#define ADMV1013_QUAD_SE_MODE_MSK GENMASK(9, 6)
|
|
#define ADMV1013_QUAD_FILTERS_MSK GENMASK(3, 0)
|
|
|
|
/* ADMV1013_REG_VVA_TEMP_COMP Map */
|
|
#define ADMV1013_VVA_TEMP_COMP_MSK GENMASK(15, 0)
|
|
|
|
/* ADMV1013 Miscellaneous Defines */
|
|
#define ADMV1013_READ BIT(7)
|
|
#define ADMV1013_REG_ADDR_READ_MSK GENMASK(6, 1)
|
|
#define ADMV1013_REG_ADDR_WRITE_MSK GENMASK(22, 17)
|
|
#define ADMV1013_REG_DATA_MSK GENMASK(16, 1)
|
|
|
|
enum {
|
|
ADMV1013_IQ_MODE,
|
|
ADMV1013_IF_MODE
|
|
};
|
|
|
|
enum {
|
|
ADMV1013_RFMOD_I_CALIBPHASE,
|
|
ADMV1013_RFMOD_Q_CALIBPHASE,
|
|
};
|
|
|
|
enum {
|
|
ADMV1013_SE_MODE_POS = 6,
|
|
ADMV1013_SE_MODE_NEG = 9,
|
|
ADMV1013_SE_MODE_DIFF = 12
|
|
};
|
|
|
|
struct admv1013_state {
|
|
struct spi_device *spi;
|
|
struct clk *clkin;
|
|
/* Protect against concurrent accesses to the device and to data */
|
|
struct mutex lock;
|
|
struct regulator *reg;
|
|
struct notifier_block nb;
|
|
unsigned int input_mode;
|
|
unsigned int quad_se_mode;
|
|
bool det_en;
|
|
u8 data[3] ____cacheline_aligned;
|
|
};
|
|
|
|
static int __admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
int ret;
|
|
struct spi_transfer t = {0};
|
|
|
|
st->data[0] = ADMV1013_READ | FIELD_PREP(ADMV1013_REG_ADDR_READ_MSK, reg);
|
|
st->data[1] = 0x0;
|
|
st->data[2] = 0x0;
|
|
|
|
t.rx_buf = &st->data[0];
|
|
t.tx_buf = &st->data[0];
|
|
t.len = 3;
|
|
|
|
ret = spi_sync_transfer(st->spi, &t, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = FIELD_GET(ADMV1013_REG_DATA_MSK, get_unaligned_be24(&st->data[0]));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int admv1013_spi_read(struct admv1013_state *st, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
ret = __admv1013_spi_read(st, reg, val);
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __admv1013_spi_write(struct admv1013_state *st,
|
|
unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
put_unaligned_be24(FIELD_PREP(ADMV1013_REG_DATA_MSK, val) |
|
|
FIELD_PREP(ADMV1013_REG_ADDR_WRITE_MSK, reg), &st->data[0]);
|
|
|
|
return spi_write(st->spi, &st->data[0], 3);
|
|
}
|
|
|
|
static int admv1013_spi_write(struct admv1013_state *st, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
ret = __admv1013_spi_write(st, reg, val);
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
|
|
unsigned int mask, unsigned int val)
|
|
{
|
|
int ret;
|
|
unsigned int data, temp;
|
|
|
|
ret = __admv1013_spi_read(st, reg, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
temp = (data & ~mask) | (val & mask);
|
|
|
|
return __admv1013_spi_write(st, reg, temp);
|
|
}
|
|
|
|
static int admv1013_spi_update_bits(struct admv1013_state *st, unsigned int reg,
|
|
unsigned int mask, unsigned int val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
ret = __admv1013_spi_update_bits(st, reg, mask, val);
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int admv1013_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long info)
|
|
{
|
|
struct admv1013_state *st = iio_priv(indio_dev);
|
|
unsigned int data, addr;
|
|
int ret;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
switch (chan->channel) {
|
|
case IIO_MOD_I:
|
|
addr = ADMV1013_REG_OFFSET_ADJUST_I;
|
|
break;
|
|
case IIO_MOD_Q:
|
|
addr = ADMV1013_REG_OFFSET_ADJUST_Q;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = admv1013_spi_read(st, addr, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!chan->channel)
|
|
*val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_P_MSK, data);
|
|
else
|
|
*val = FIELD_GET(ADMV1013_MIXER_OFF_ADJ_N_MSK, data);
|
|
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int admv1013_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long info)
|
|
{
|
|
struct admv1013_state *st = iio_priv(indio_dev);
|
|
unsigned int addr, data, msk;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
switch (chan->channel2) {
|
|
case IIO_MOD_I:
|
|
addr = ADMV1013_REG_OFFSET_ADJUST_I;
|
|
break;
|
|
case IIO_MOD_Q:
|
|
addr = ADMV1013_REG_OFFSET_ADJUST_Q;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!chan->channel) {
|
|
msk = ADMV1013_MIXER_OFF_ADJ_P_MSK;
|
|
data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_P_MSK, val);
|
|
} else {
|
|
msk = ADMV1013_MIXER_OFF_ADJ_N_MSK;
|
|
data = FIELD_PREP(ADMV1013_MIXER_OFF_ADJ_N_MSK, val);
|
|
}
|
|
|
|
return admv1013_spi_update_bits(st, addr, msk, data);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static ssize_t admv1013_read(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
char *buf)
|
|
{
|
|
struct admv1013_state *st = iio_priv(indio_dev);
|
|
unsigned int data, addr;
|
|
int ret;
|
|
|
|
switch ((u32)private) {
|
|
case ADMV1013_RFMOD_I_CALIBPHASE:
|
|
addr = ADMV1013_REG_LO_AMP_I;
|
|
break;
|
|
case ADMV1013_RFMOD_Q_CALIBPHASE:
|
|
addr = ADMV1013_REG_LO_AMP_Q;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = admv1013_spi_read(st, addr, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = FIELD_GET(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
|
|
|
|
return sysfs_emit(buf, "%u\n", data);
|
|
}
|
|
|
|
static ssize_t admv1013_write(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct admv1013_state *st = iio_priv(indio_dev);
|
|
unsigned int data;
|
|
int ret;
|
|
|
|
ret = kstrtou32(buf, 10, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = FIELD_PREP(ADMV1013_LOAMP_PH_ADJ_FINE_MSK, data);
|
|
|
|
switch ((u32)private) {
|
|
case ADMV1013_RFMOD_I_CALIBPHASE:
|
|
ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
|
|
ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
|
|
data);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
case ADMV1013_RFMOD_Q_CALIBPHASE:
|
|
ret = admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_Q,
|
|
ADMV1013_LOAMP_PH_ADJ_FINE_MSK,
|
|
data);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static int admv1013_update_quad_filters(struct admv1013_state *st)
|
|
{
|
|
unsigned int filt_raw;
|
|
u64 rate = clk_get_rate(st->clkin);
|
|
|
|
if (rate >= (5400 * HZ_PER_MHZ) && rate <= (7000 * HZ_PER_MHZ))
|
|
filt_raw = 15;
|
|
else if (rate >= (5400 * HZ_PER_MHZ) && rate <= (8000 * HZ_PER_MHZ))
|
|
filt_raw = 10;
|
|
else if (rate >= (6600 * HZ_PER_MHZ) && rate <= (9200 * HZ_PER_MHZ))
|
|
filt_raw = 5;
|
|
else
|
|
filt_raw = 0;
|
|
|
|
return __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
|
|
ADMV1013_QUAD_FILTERS_MSK,
|
|
FIELD_PREP(ADMV1013_QUAD_FILTERS_MSK, filt_raw));
|
|
}
|
|
|
|
static int admv1013_update_mixer_vgate(struct admv1013_state *st)
|
|
{
|
|
unsigned int vcm, mixer_vgate;
|
|
|
|
vcm = regulator_get_voltage(st->reg);
|
|
|
|
if (vcm < 1800000)
|
|
mixer_vgate = (2389 * vcm / 1000000 + 8100) / 100;
|
|
else if (vcm > 1800000 && vcm < 2600000)
|
|
mixer_vgate = (2375 * vcm / 1000000 + 125) / 100;
|
|
else
|
|
return -EINVAL;
|
|
|
|
return __admv1013_spi_update_bits(st, ADMV1013_REG_LO_AMP_I,
|
|
ADMV1013_MIXER_VGATE_MSK,
|
|
FIELD_PREP(ADMV1013_MIXER_VGATE_MSK, mixer_vgate));
|
|
}
|
|
|
|
static int admv1013_reg_access(struct iio_dev *indio_dev,
|
|
unsigned int reg,
|
|
unsigned int write_val,
|
|
unsigned int *read_val)
|
|
{
|
|
struct admv1013_state *st = iio_priv(indio_dev);
|
|
|
|
if (read_val)
|
|
return admv1013_spi_read(st, reg, read_val);
|
|
else
|
|
return admv1013_spi_write(st, reg, write_val);
|
|
}
|
|
|
|
static const struct iio_info admv1013_info = {
|
|
.read_raw = admv1013_read_raw,
|
|
.write_raw = admv1013_write_raw,
|
|
.debugfs_reg_access = &admv1013_reg_access,
|
|
};
|
|
|
|
static int admv1013_freq_change(struct notifier_block *nb, unsigned long action, void *data)
|
|
{
|
|
struct admv1013_state *st = container_of(nb, struct admv1013_state, nb);
|
|
int ret;
|
|
|
|
if (action == POST_RATE_CHANGE) {
|
|
mutex_lock(&st->lock);
|
|
ret = notifier_from_errno(admv1013_update_quad_filters(st));
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
#define _ADMV1013_EXT_INFO(_name, _shared, _ident) { \
|
|
.name = _name, \
|
|
.read = admv1013_read, \
|
|
.write = admv1013_write, \
|
|
.private = _ident, \
|
|
.shared = _shared, \
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info admv1013_ext_info[] = {
|
|
_ADMV1013_EXT_INFO("i_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_I_CALIBPHASE),
|
|
_ADMV1013_EXT_INFO("q_calibphase", IIO_SEPARATE, ADMV1013_RFMOD_Q_CALIBPHASE),
|
|
{ },
|
|
};
|
|
|
|
#define ADMV1013_CHAN_PHASE(_channel, _channel2, _admv1013_ext_info) { \
|
|
.type = IIO_ALTVOLTAGE, \
|
|
.output = 0, \
|
|
.indexed = 1, \
|
|
.channel2 = _channel2, \
|
|
.channel = _channel, \
|
|
.differential = 1, \
|
|
.ext_info = _admv1013_ext_info, \
|
|
}
|
|
|
|
#define ADMV1013_CHAN_CALIB(_channel, rf_comp) { \
|
|
.type = IIO_ALTVOLTAGE, \
|
|
.output = 0, \
|
|
.indexed = 1, \
|
|
.channel = _channel, \
|
|
.channel2 = IIO_MOD_##rf_comp, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS), \
|
|
}
|
|
|
|
static const struct iio_chan_spec admv1013_channels[] = {
|
|
ADMV1013_CHAN_PHASE(0, 1, admv1013_ext_info),
|
|
ADMV1013_CHAN_CALIB(0, I),
|
|
ADMV1013_CHAN_CALIB(0, Q),
|
|
ADMV1013_CHAN_CALIB(1, I),
|
|
ADMV1013_CHAN_CALIB(1, Q),
|
|
};
|
|
|
|
static int admv1013_init(struct admv1013_state *st)
|
|
{
|
|
int ret;
|
|
unsigned int data;
|
|
struct spi_device *spi = st->spi;
|
|
|
|
/* Perform a software reset */
|
|
ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
|
|
ADMV1013_SPI_SOFT_RESET_MSK,
|
|
FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 1));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = __admv1013_spi_update_bits(st, ADMV1013_REG_SPI_CONTROL,
|
|
ADMV1013_SPI_SOFT_RESET_MSK,
|
|
FIELD_PREP(ADMV1013_SPI_SOFT_RESET_MSK, 0));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = __admv1013_spi_read(st, ADMV1013_REG_SPI_CONTROL, &data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = FIELD_GET(ADMV1013_CHIP_ID_MSK, data);
|
|
if (data != ADMV1013_CHIP_ID) {
|
|
dev_err(&spi->dev, "Invalid Chip ID.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = __admv1013_spi_write(st, ADMV1013_REG_VVA_TEMP_COMP, 0xE700);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data = FIELD_PREP(ADMV1013_QUAD_SE_MODE_MSK, st->quad_se_mode);
|
|
|
|
ret = __admv1013_spi_update_bits(st, ADMV1013_REG_QUAD,
|
|
ADMV1013_QUAD_SE_MODE_MSK, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = admv1013_update_mixer_vgate(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = admv1013_update_quad_filters(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return __admv1013_spi_update_bits(st, ADMV1013_REG_ENABLE,
|
|
ADMV1013_DET_EN_MSK |
|
|
ADMV1013_MIXER_IF_EN_MSK,
|
|
st->det_en |
|
|
st->input_mode);
|
|
}
|
|
|
|
static void admv1013_clk_disable(void *data)
|
|
{
|
|
clk_disable_unprepare(data);
|
|
}
|
|
|
|
static void admv1013_reg_disable(void *data)
|
|
{
|
|
regulator_disable(data);
|
|
}
|
|
|
|
static void admv1013_powerdown(void *data)
|
|
{
|
|
unsigned int enable_reg, enable_reg_msk;
|
|
|
|
/* Disable all components in the Enable Register */
|
|
enable_reg_msk = ADMV1013_VGA_PD_MSK |
|
|
ADMV1013_MIXER_PD_MSK |
|
|
ADMV1013_QUAD_PD_MSK |
|
|
ADMV1013_BG_PD_MSK |
|
|
ADMV1013_MIXER_IF_EN_MSK |
|
|
ADMV1013_DET_EN_MSK;
|
|
|
|
enable_reg = FIELD_PREP(ADMV1013_VGA_PD_MSK, 1) |
|
|
FIELD_PREP(ADMV1013_MIXER_PD_MSK, 1) |
|
|
FIELD_PREP(ADMV1013_QUAD_PD_MSK, 7) |
|
|
FIELD_PREP(ADMV1013_BG_PD_MSK, 1) |
|
|
FIELD_PREP(ADMV1013_MIXER_IF_EN_MSK, 0) |
|
|
FIELD_PREP(ADMV1013_DET_EN_MSK, 0);
|
|
|
|
admv1013_spi_update_bits(data, ADMV1013_REG_ENABLE, enable_reg_msk, enable_reg);
|
|
}
|
|
|
|
static int admv1013_properties_parse(struct admv1013_state *st)
|
|
{
|
|
int ret;
|
|
const char *str;
|
|
struct spi_device *spi = st->spi;
|
|
|
|
st->det_en = device_property_read_bool(&spi->dev, "adi,detector-enable");
|
|
|
|
ret = device_property_read_string(&spi->dev, "adi,input-mode", &str);
|
|
if (ret)
|
|
st->input_mode = ADMV1013_IQ_MODE;
|
|
|
|
if (!strcmp(str, "iq"))
|
|
st->input_mode = ADMV1013_IQ_MODE;
|
|
else if (!strcmp(str, "if"))
|
|
st->input_mode = ADMV1013_IF_MODE;
|
|
else
|
|
return -EINVAL;
|
|
|
|
ret = device_property_read_string(&spi->dev, "adi,quad-se-mode", &str);
|
|
if (ret)
|
|
st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
|
|
|
|
if (!strcmp(str, "diff"))
|
|
st->quad_se_mode = ADMV1013_SE_MODE_DIFF;
|
|
else if (!strcmp(str, "se-pos"))
|
|
st->quad_se_mode = ADMV1013_SE_MODE_POS;
|
|
else if (!strcmp(str, "se-neg"))
|
|
st->quad_se_mode = ADMV1013_SE_MODE_NEG;
|
|
else
|
|
return -EINVAL;
|
|
|
|
st->reg = devm_regulator_get(&spi->dev, "vcm");
|
|
if (IS_ERR(st->reg))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
|
|
"failed to get the common-mode voltage\n");
|
|
|
|
st->clkin = devm_clk_get(&spi->dev, "lo_in");
|
|
if (IS_ERR(st->clkin))
|
|
return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
|
|
"failed to get the LO input clock\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int admv1013_probe(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct admv1013_state *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
indio_dev->info = &admv1013_info;
|
|
indio_dev->name = "admv1013";
|
|
indio_dev->channels = admv1013_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(admv1013_channels);
|
|
|
|
st->spi = spi;
|
|
|
|
ret = admv1013_properties_parse(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to enable specified Common-Mode Voltage!\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, admv1013_reg_disable,
|
|
st->reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(st->clkin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, admv1013_clk_disable, st->clkin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
st->nb.notifier_call = admv1013_freq_change;
|
|
ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_init(&st->lock);
|
|
|
|
ret = admv1013_init(st);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "admv1013 init failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&spi->dev, admv1013_powerdown, st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
|
}
|
|
|
|
static const struct spi_device_id admv1013_id[] = {
|
|
{ "admv1013", 0 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, admv1013_id);
|
|
|
|
static const struct of_device_id admv1013_of_match[] = {
|
|
{ .compatible = "adi,admv1013" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, admv1013_of_match);
|
|
|
|
static struct spi_driver admv1013_driver = {
|
|
.driver = {
|
|
.name = "admv1013",
|
|
.of_match_table = admv1013_of_match,
|
|
},
|
|
.probe = admv1013_probe,
|
|
.id_table = admv1013_id,
|
|
};
|
|
module_spi_driver(admv1013_driver);
|
|
|
|
MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com");
|
|
MODULE_DESCRIPTION("Analog Devices ADMV1013");
|
|
MODULE_LICENSE("GPL v2");
|