forked from Minki/linux
a03636cb21
The omap24xx driver and the tcm825x sensor driver are the only two remaining drivers to still use the old deprecated v4l2-int-device API. Nobody maintains these drivers anymore. But unfortunately the v4l2-int-device API is used by out-of-tree drivers (MXC platform). This is a very bad situation since as long as this deprecated API stays in the kernel there is no reason for those out-of-tree drivers to convert. This patch moves v4l2-int-device and the two drivers that depend on it to staging in preparation for their removal. If someone would be interested in getting these drivers to work, then start with this since it's not very far from the state where they used to work: <URL:http://vihersipuli.retiisi.org.uk/cgi-bin/gitweb.cgi?p=~sailus/linux-omap/.git;a=summary> The branch is n800-cam. Porting to up-to-date APIs can then be done. David might have done some work in that area, so check with him first. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: David Cohen <dacohen@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
265 lines
7.5 KiB
Plaintext
265 lines
7.5 KiB
Plaintext
#
|
|
# Platform drivers
|
|
# All drivers here are currently for webcam support
|
|
|
|
menuconfig V4L_PLATFORM_DRIVERS
|
|
bool "V4L platform devices"
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
default n
|
|
---help---
|
|
Say Y here to enable support for platform-specific V4L drivers.
|
|
|
|
if V4L_PLATFORM_DRIVERS
|
|
|
|
source "drivers/media/platform/marvell-ccic/Kconfig"
|
|
|
|
config VIDEO_VIA_CAMERA
|
|
tristate "VIAFB camera controller support"
|
|
depends on FB_VIA
|
|
select VIDEOBUF_DMA_SG
|
|
select VIDEO_OV7670
|
|
help
|
|
Driver support for the integrated camera controller in VIA
|
|
Chrome9 chipsets. Currently only tested on OLPC xo-1.5 systems
|
|
with ov7670 sensors.
|
|
|
|
#
|
|
# Platform multimedia device configuration
|
|
#
|
|
|
|
source "drivers/media/platform/davinci/Kconfig"
|
|
|
|
source "drivers/media/platform/omap/Kconfig"
|
|
|
|
source "drivers/media/platform/blackfin/Kconfig"
|
|
|
|
config VIDEO_SH_VOU
|
|
tristate "SuperH VOU video output driver"
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
depends on VIDEO_DEV && I2C
|
|
depends on ARCH_SHMOBILE || COMPILE_TEST
|
|
select VIDEOBUF_DMA_CONTIG
|
|
help
|
|
Support for the Video Output Unit (VOU) on SuperH SoCs.
|
|
|
|
config VIDEO_VIU
|
|
tristate "Freescale VIU Video Driver"
|
|
depends on VIDEO_V4L2 && PPC_MPC512x
|
|
select VIDEOBUF_DMA_CONTIG
|
|
default y
|
|
---help---
|
|
Support for Freescale VIU video driver. This device captures
|
|
video data, or overlays video on DIU frame buffer.
|
|
|
|
Say Y here if you want to enable VIU device on MPC5121e Rev2+.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_TIMBERDALE
|
|
tristate "Support for timberdale Video In/LogiWIN"
|
|
depends on VIDEO_V4L2 && I2C && DMADEVICES
|
|
select DMA_ENGINE
|
|
select TIMB_DMA
|
|
select VIDEO_ADV7180
|
|
select VIDEOBUF_DMA_CONTIG
|
|
---help---
|
|
Add support for the Video In peripherial of the timberdale FPGA.
|
|
|
|
config VIDEO_VINO
|
|
tristate "SGI Vino Video For Linux"
|
|
depends on I2C && SGI_IP22 && VIDEO_V4L2
|
|
select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
|
|
help
|
|
Say Y here to build in support for the Vino video input system found
|
|
on SGI Indy machines.
|
|
|
|
config VIDEO_M32R_AR
|
|
tristate "AR devices"
|
|
depends on M32R && VIDEO_V4L2
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial Retina)
|
|
camera module.
|
|
|
|
config VIDEO_M32R_AR_M64278
|
|
tristate "AR device with color module M64278(VGA)"
|
|
depends on PLAT_M32700UT
|
|
select VIDEO_M32R_AR
|
|
---help---
|
|
This is a video4linux driver for the Renesas AR (Artificial
|
|
Retina) with M64278E-800 camera module.
|
|
This module supports VGA(640x480 pixels) resolutions.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called arv.
|
|
|
|
config VIDEO_OMAP3
|
|
tristate "OMAP 3 Camera support"
|
|
depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
|
|
---help---
|
|
Driver for an OMAP 3 camera controller.
|
|
|
|
config VIDEO_OMAP3_DEBUG
|
|
bool "OMAP 3 Camera debug messages"
|
|
depends on VIDEO_OMAP3
|
|
---help---
|
|
Enable debug messages on OMAP 3 camera controller driver.
|
|
|
|
config VIDEO_S3C_CAMIF
|
|
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
|
|
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
|
|
depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
---help---
|
|
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
|
|
host interface (CAMIF).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called s3c-camif.
|
|
|
|
source "drivers/media/platform/soc_camera/Kconfig"
|
|
source "drivers/media/platform/exynos4-is/Kconfig"
|
|
source "drivers/media/platform/s5p-tv/Kconfig"
|
|
|
|
endif # V4L_PLATFORM_DRIVERS
|
|
|
|
menuconfig V4L_MEM2MEM_DRIVERS
|
|
bool "Memory-to-memory multimedia devices"
|
|
depends on VIDEO_V4L2
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
default n
|
|
---help---
|
|
Say Y here to enable selecting drivers for V4L devices that
|
|
use system memory for both source and destination buffers, as opposed
|
|
to capture and output drivers, which use memory buffers for just
|
|
one of those.
|
|
|
|
if V4L_MEM2MEM_DRIVERS
|
|
|
|
config VIDEO_CODA
|
|
tristate "Chips&Media Coda multi-standard codec IP"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC
|
|
select SRAM
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
---help---
|
|
Coda is a range of video codec IPs that supports
|
|
H.264, MPEG-4, and other video formats.
|
|
|
|
config VIDEO_MEM2MEM_DEINTERLACE
|
|
tristate "Deinterlace support"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Generic deinterlacing V4L2 driver.
|
|
|
|
config VIDEO_SAMSUNG_S5P_G2D
|
|
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
default n
|
|
---help---
|
|
This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
|
|
2d graphics accelerator.
|
|
|
|
config VIDEO_SAMSUNG_S5P_JPEG
|
|
tristate "Samsung S5P/Exynos4 JPEG codec driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
---help---
|
|
This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
|
|
|
|
config VIDEO_SAMSUNG_S5P_MFC
|
|
tristate "Samsung S5P MFC Video Codec"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && (PLAT_S5P || ARCH_EXYNOS)
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
default n
|
|
help
|
|
MFC 5.1 and 6.x driver for V4L2
|
|
|
|
config VIDEO_MX2_EMMAPRP
|
|
tristate "MX2 eMMa-PrP support"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
MX2X chips have a PrP that can be used to process buffers from
|
|
memory to memory. Operations include resizing and format
|
|
conversion.
|
|
|
|
config VIDEO_SAMSUNG_EXYNOS_GSC
|
|
tristate "Samsung Exynos G-Scaler driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
|
|
|
|
config VIDEO_SH_VEU
|
|
tristate "SuperH VEU mem2mem video processing driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
help
|
|
Support for the Video Engine Unit (VEU) on SuperH and
|
|
SH-Mobile SoCs.
|
|
|
|
config VIDEO_RENESAS_VSP1
|
|
tristate "Renesas VSP1 Video Processing Engine"
|
|
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
---help---
|
|
This is a V4L2 driver for the Renesas VSP1 video processing engine.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called vsp1.
|
|
|
|
config VIDEO_TI_VPE
|
|
tristate "TI VPE (Video Processing Engine) driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && SOC_DRA7XX
|
|
select VIDEOBUF2_DMA_CONTIG
|
|
select V4L2_MEM2MEM_DEV
|
|
default n
|
|
---help---
|
|
Support for the TI VPE(Video Processing Engine) block
|
|
found on DRA7XX SoC.
|
|
|
|
config VIDEO_TI_VPE_DEBUG
|
|
bool "VPE debug messages"
|
|
depends on VIDEO_TI_VPE
|
|
---help---
|
|
Enable debug messages on VPE driver.
|
|
|
|
endif # V4L_MEM2MEM_DRIVERS
|
|
|
|
menuconfig V4L_TEST_DRIVERS
|
|
bool "Media test drivers"
|
|
depends on MEDIA_CAMERA_SUPPORT
|
|
|
|
if V4L_TEST_DRIVERS
|
|
config VIDEO_VIVI
|
|
tristate "Virtual Video Driver"
|
|
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
|
|
select FONT_SUPPORT
|
|
select FONT_8x16
|
|
select VIDEOBUF2_VMALLOC
|
|
default n
|
|
---help---
|
|
Enables a virtual video driver. This device shows a color bar
|
|
and a timestamp, as a real device would generate by using V4L2
|
|
api.
|
|
Say Y here if you want to test video apps or debug V4L devices.
|
|
In doubt, say N.
|
|
|
|
config VIDEO_MEM2MEM_TESTDEV
|
|
tristate "Virtual test device for mem2mem framework"
|
|
depends on VIDEO_DEV && VIDEO_V4L2
|
|
select VIDEOBUF2_VMALLOC
|
|
select V4L2_MEM2MEM_DEV
|
|
default n
|
|
---help---
|
|
This is a virtual test device for the memory-to-memory driver
|
|
framework.
|
|
endif #V4L_TEST_DRIVERS
|