/* * ATAPI support. */ #include #include #include #include #include #ifdef DEBUG #define debug_log(fmt, args...) \ printk(KERN_INFO "ide: " fmt, ## args) #else #define debug_log(fmt, args...) do {} while (0) #endif #define ATAPI_MIN_CDB_BYTES 12 static inline int dev_is_idecd(ide_drive_t *drive) { return drive->media == ide_cdrom || drive->media == ide_optical; } /* * Check whether we can support a device, * based on the ATAPI IDENTIFY command results. */ int ide_check_atapi_device(ide_drive_t *drive, const char *s) { u16 *id = drive->id; u8 gcw[2], protocol, device_type, removable, drq_type, packet_size; *((u16 *)&gcw) = id[ATA_ID_CONFIG]; protocol = (gcw[1] & 0xC0) >> 6; device_type = gcw[1] & 0x1F; removable = (gcw[0] & 0x80) >> 7; drq_type = (gcw[0] & 0x60) >> 5; packet_size = gcw[0] & 0x03; #ifdef CONFIG_PPC /* kludge for Apple PowerBook internal zip */ if (drive->media == ide_floppy && device_type == 5 && !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") && strstr((char *)&id[ATA_ID_PROD], "ZIP")) device_type = 0; #endif if (protocol != 2) printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n", s, drive->name, protocol); else if ((drive->media == ide_floppy && device_type != 0) || (drive->media == ide_tape && device_type != 1)) printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n", s, drive->name, device_type); else if (removable == 0) printk(KERN_ERR "%s: %s: the removable flag is not set\n", s, drive->name); else if (drive->media == ide_floppy && drq_type == 3) printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not " "supported\n", s, drive->name, drq_type); else if (packet_size != 0) printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 " "bytes\n", s, drive->name, packet_size); else return 1; return 0; } EXPORT_SYMBOL_GPL(ide_check_atapi_device); /* PIO data transfer routine using the scatter gather table. */ int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount, int write) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data; struct scatterlist *sg = pc->sg; char *buf; int count, done = 0; while (bcount) { count = min(sg->length - pc->b_count, bcount); if (PageHighMem(sg_page(sg))) { unsigned long flags; local_irq_save(flags); buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset; xf(drive, NULL, buf + pc->b_count, count); kunmap_atomic(buf - sg->offset, KM_IRQ0); local_irq_restore(flags); } else { buf = sg_virt(sg); xf(drive, NULL, buf + pc->b_count, count); } bcount -= count; pc->b_count += count; done += count; if (pc->b_count == sg->length) { if (!--pc->sg_cnt) break; pc->sg = sg = sg_next(sg); pc->b_count = 0; } } if (bcount) { printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name, bcount, write ? "padding with zeros" : "discarding data"); ide_pad_transfer(drive, write, bcount); } return done; } EXPORT_SYMBOL_GPL(ide_io_buffers); void ide_init_pc(struct ide_atapi_pc *pc) { memset(pc, 0, sizeof(*pc)); pc->buf = pc->pc_buf; pc->buf_size = IDE_PC_BUFFER_SIZE; } EXPORT_SYMBOL_GPL(ide_init_pc); /* * Generate a new packet command request in front of the request queue, before * the current request, so that it will be processed immediately, on the next * pass through the driver. */ static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk, struct ide_atapi_pc *pc, struct request *rq) { blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *)pc; rq->rq_disk = disk; if (pc->req_xfer) { rq->data = pc->buf; rq->data_len = pc->req_xfer; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; drive->hwif->rq = NULL; elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0); } /* * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. */ int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk, struct ide_atapi_pc *pc) { struct request *rq; int error; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->buffer = (char *)pc; if (pc->req_xfer) { rq->data = pc->buf; rq->data_len = pc->req_xfer; } memcpy(rq->cmd, pc->c, 12); if (drive->media == ide_tape) rq->cmd[13] = REQ_IDETAPE_PC1; error = blk_execute_rq(drive->queue, disk, rq, 0); blk_put_request(rq); return error; } EXPORT_SYMBOL_GPL(ide_queue_pc_tail); int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk) { struct ide_atapi_pc pc; ide_init_pc(&pc); pc.c[0] = TEST_UNIT_READY; return ide_queue_pc_tail(drive, disk, &pc); } EXPORT_SYMBOL_GPL(ide_do_test_unit_ready); int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start) { struct ide_atapi_pc pc; ide_init_pc(&pc); pc.c[0] = START_STOP; pc.c[4] = start; if (drive->media == ide_tape) pc.flags |= PC_FLAG_WAIT_FOR_DSC; return ide_queue_pc_tail(drive, disk, &pc); } EXPORT_SYMBOL_GPL(ide_do_start_stop); int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on) { struct ide_atapi_pc pc; if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) return 0; ide_init_pc(&pc); pc.c[0] = ALLOW_MEDIUM_REMOVAL; pc.c[4] = on; return ide_queue_pc_tail(drive, disk, &pc); } EXPORT_SYMBOL_GPL(ide_set_media_lock); void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc) { ide_init_pc(pc); pc->c[0] = REQUEST_SENSE; if (drive->media == ide_floppy) { pc->c[4] = 255; pc->req_xfer = 18; } else { pc->c[4] = 20; pc->req_xfer = 20; } } EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd); /* * Called when an error was detected during the last packet command. * We queue a request sense packet command in the head of the request list. */ void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk) { struct request *rq = &drive->request_sense_rq; struct ide_atapi_pc *pc = &drive->request_sense_pc; (void)ide_read_error(drive); ide_create_request_sense_cmd(drive, pc); if (drive->media == ide_tape) set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags); ide_queue_pc_head(drive, disk, pc, rq); } EXPORT_SYMBOL_GPL(ide_retry_pc); int ide_cd_expiry(ide_drive_t *drive) { struct request *rq = drive->hwif->rq; unsigned long wait = 0; debug_log("%s: rq->cmd[0]: 0x%x\n", __func__, rq->cmd[0]); /* * Some commands are *slow* and normally take a long time to complete. * Usually we can use the ATAPI "disconnect" to bypass this, but not all * commands/drives support that. Let ide_timer_expiry keep polling us * for these. */ switch (rq->cmd[0]) { case GPCMD_BLANK: case GPCMD_FORMAT_UNIT: case GPCMD_RESERVE_RZONE_TRACK: case GPCMD_CLOSE_TRACK: case GPCMD_FLUSH_CACHE: wait = ATAPI_WAIT_PC; break; default: if (!(rq->cmd_flags & REQ_QUIET)) printk(KERN_INFO "cmd 0x%x timed out\n", rq->cmd[0]); wait = 0; break; } return wait; } EXPORT_SYMBOL_GPL(ide_cd_expiry); int ide_cd_get_xferlen(struct request *rq) { if (blk_fs_request(rq)) return 32768; else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) return rq->data_len; else return 0; } EXPORT_SYMBOL_GPL(ide_cd_get_xferlen); void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason) { struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); cmd.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM | IDE_TFLAG_IN_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); *bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam; *ireason = cmd.tf.nsect & 3; } EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason); /* * This is the usual interrupt handler which will be called during a packet * command. We will transfer some of the data (as requested by the drive) * and will re-point interrupt handler to us. */ static ide_startstop_t ide_pc_intr(ide_drive_t *drive) { struct ide_atapi_pc *pc = drive->pc; ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; const struct ide_tp_ops *tp_ops = hwif->tp_ops; xfer_func_t *xferfunc; unsigned int timeout, temp; u16 bcount; u8 stat, ireason, dsc = 0; debug_log("Enter %s - interrupt handler\n", __func__); timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD : WAIT_TAPE_CMD; /* Clear the interrupt */ stat = tp_ops->read_status(hwif); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive) || (drive->media == ide_tape && (stat & ATA_ERR))) { if (drive->media == ide_floppy) printk(KERN_ERR "%s: DMA %s error\n", drive->name, rq_data_dir(pc->rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->xferred = pc->req_xfer; if (drive->pc_update_buffers) drive->pc_update_buffers(drive, pc); } debug_log("%s: DMA finished\n", drive->name); } /* No more interrupts */ if ((stat & ATA_DRQ) == 0) { int uptodate; debug_log("Packet command completed, %d bytes transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); if (drive->media == ide_tape && (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE) stat &= ~ATA_ERR; if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ debug_log("%s: I/O error\n", drive->name); if (drive->media != ide_tape) pc->rq->errors++; if (rq->cmd[0] == REQUEST_SENSE) { printk(KERN_ERR "%s: I/O error in request sense" " command\n", drive->name); return ide_do_reset(drive); } debug_log("[cmd %x]: check condition\n", rq->cmd[0]); /* Retry operation */ ide_retry_pc(drive, rq->rq_disk); /* queued, but not started */ return ide_stopped; } pc->error = 0; if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0) dsc = 1; /* Command finished - Call the callback function */ uptodate = drive->pc_callback(drive, dsc); if (uptodate == 0) drive->failed_pc = NULL; if (blk_special_request(rq)) { rq->errors = 0; ide_complete_rq(drive, 0, blk_rq_bytes(rq)); } else { if (blk_fs_request(rq) == 0 && uptodate <= 0) { if (rq->errors == 0) rq->errors = -EIO; } ide_complete_rq(drive, uptodate ? 0 : -EIO, ide_rq_bytes(rq)); } return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "%s: The device wants to issue more interrupts " "in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } /* Get the number of bytes to transfer on this interrupt. */ ide_read_bcount_and_ireason(drive, &bcount, &ireason); if (ireason & ATAPI_COD) { printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } if (((ireason & ATAPI_IO) == ATAPI_IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "%s: We wanted to %s, but the device wants us " "to %s!\n", drive->name, (ireason & ATAPI_IO) ? "Write" : "Read", (ireason & ATAPI_IO) ? "Read" : "Write"); return ide_do_reset(drive); } if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { printk(KERN_ERR "%s: The device wants to send " "us more data than expected - " "discarding data\n", drive->name); ide_pad_transfer(drive, 0, bcount); goto next_irq; } debug_log("The device wants to send us more data than " "expected - allowing transfer\n"); } xferfunc = tp_ops->input_data; } else xferfunc = tp_ops->output_data; if ((drive->media == ide_floppy && !pc->buf) || (drive->media == ide_tape && pc->bh)) { int done = drive->pc_io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); /* FIXME: don't do partial completions */ if (drive->media == ide_floppy) ide_complete_rq(drive, 0, done ? done : ide_rq_bytes(rq)); } else xferfunc(drive, NULL, pc->cur_pos, bcount); /* Update the current position */ pc->xferred += bcount; pc->cur_pos += bcount; debug_log("[cmd %x] transferred %d bytes on that intr.\n", rq->cmd[0], bcount); next_irq: /* And set the interrupt handler again */ ide_set_handler(drive, ide_pc_intr, timeout, NULL); return ide_started; } static void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount) { ide_hwif_t *hwif = drive->hwif; struct ide_cmd cmd; u8 dma = drive->dma; memset(&cmd, 0, sizeof(cmd)); cmd.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | IDE_TFLAG_OUT_FEATURE | tf_flags; cmd.tf.feature = dma; /* Use PIO/DMA */ cmd.tf.lbam = bcount & 0xff; cmd.tf.lbah = (bcount >> 8) & 0xff; ide_tf_dump(drive->name, &cmd.tf); hwif->tp_ops->set_irq(hwif, 1); SELECT_MASK(drive, 0); hwif->tp_ops->tf_load(drive, &cmd); } static u8 ide_read_ireason(ide_drive_t *drive) { struct ide_cmd cmd; memset(&cmd, 0, sizeof(cmd)); cmd.tf_flags = IDE_TFLAG_IN_NSECT; drive->hwif->tp_ops->tf_read(drive, &cmd); return cmd.tf.nsect & 3; } static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) { int retries = 100; while (retries-- && ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO))) { printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n", drive->name); udelay(100); ireason = ide_read_ireason(drive); if (retries == 0) { printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, ignoring\n", drive->name); ireason |= ATAPI_COD; ireason &= ~ATAPI_IO; } } return ireason; } static int ide_delayed_transfer_pc(ide_drive_t *drive) { /* Send the actual packet */ drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12); /* Timeout for the packet command */ return WAIT_FLOPPY_CMD; } static ide_startstop_t ide_transfer_pc(ide_drive_t *drive) { struct ide_atapi_pc *uninitialized_var(pc); ide_hwif_t *hwif = drive->hwif; struct request *rq = hwif->rq; ide_expiry_t *expiry; unsigned int timeout; int cmd_len; ide_startstop_t startstop; u8 ireason; if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) { printk(KERN_ERR "%s: Strange, packet command initiated yet " "DRQ isn't asserted\n", drive->name); return startstop; } if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { if (drive->dma) drive->waiting_for_dma = 1; } if (dev_is_idecd(drive)) { /* ATAPI commands get padded out to 12 bytes minimum */ cmd_len = COMMAND_SIZE(rq->cmd[0]); if (cmd_len < ATAPI_MIN_CDB_BYTES) cmd_len = ATAPI_MIN_CDB_BYTES; timeout = rq->timeout; expiry = ide_cd_expiry; } else { pc = drive->pc; cmd_len = ATAPI_MIN_CDB_BYTES; /* * If necessary schedule the packet transfer to occur 'timeout' * miliseconds later in ide_delayed_transfer_pc() after the * device says it's ready for a packet. */ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) { timeout = drive->pc_delay; expiry = &ide_delayed_transfer_pc; } else { timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD : WAIT_TAPE_CMD; expiry = NULL; } ireason = ide_read_ireason(drive); if (drive->media == ide_tape) ireason = ide_wait_ireason(drive, ireason); if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) { printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " "a packet command\n", drive->name); return ide_do_reset(drive); } } /* Set the interrupt routine */ ide_set_handler(drive, (dev_is_idecd(drive) ? drive->irq_handler : ide_pc_intr), timeout, expiry); /* Begin DMA, if necessary */ if (dev_is_idecd(drive)) { if (drive->dma) hwif->dma_ops->dma_start(drive); } else { if (pc->flags & PC_FLAG_DMA_OK) { pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_ops->dma_start(drive); } } /* Send the actual packet */ if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0) hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len); return ide_started; } ide_startstop_t ide_issue_pc(ide_drive_t *drive) { struct ide_atapi_pc *pc; ide_hwif_t *hwif = drive->hwif; ide_expiry_t *expiry = NULL; struct request *rq = hwif->rq; unsigned int timeout; u32 tf_flags; u16 bcount; if (dev_is_idecd(drive)) { tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL; bcount = ide_cd_get_xferlen(rq); expiry = ide_cd_expiry; timeout = ATAPI_WAIT_PC; if (drive->dma) { if (ide_build_sglist(drive, rq)) drive->dma = !hwif->dma_ops->dma_setup(drive); else drive->dma = 0; } } else { pc = drive->pc; /* We haven't transferred any data yet */ pc->xferred = 0; pc->cur_pos = pc->buf; tf_flags = IDE_TFLAG_OUT_DEVICE; bcount = ((drive->media == ide_tape) ? pc->req_xfer : min(pc->req_xfer, 63 * 1024)); if (pc->flags & PC_FLAG_DMA_ERROR) { pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); } if ((pc->flags & PC_FLAG_DMA_OK) && (drive->dev_flags & IDE_DFLAG_USING_DMA)) { if (ide_build_sglist(drive, rq)) drive->dma = !hwif->dma_ops->dma_setup(drive); else drive->dma = 0; } if (!drive->dma) pc->flags &= ~PC_FLAG_DMA_OK; timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD : WAIT_TAPE_CMD; } ide_pktcmd_tf_load(drive, tf_flags, bcount); /* Issue the packet command */ if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) { if (drive->dma) drive->waiting_for_dma = 0; ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc, timeout, expiry); return ide_started; } else { ide_execute_pkt_cmd(drive); return ide_transfer_pc(drive); } } EXPORT_SYMBOL_GPL(ide_issue_pc);